Search NASA⌕ Search

SEARCH · Search NASA

Results for “Virtual models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Debond Analyses for Stitched Composite Structures

The effect of stitching on mode I and mode II strain energy release rates for debond configurations is studied using an analysis based on plate finite elements and the virtual crack closure technique. The stitches were modeled as discrete nonlinear fastener elements with a compliance determined by experiment. The axial and shear behavior of the stitches was considered with both the compliances and failure loads assumed to be independent. The mode I strain energy release rate, G(sub I), was shown to decrease once the debond had grown beyond the first row of stitches and was reduced to zero for long debonds, however, the mode II strain energy release rate, G(sub II), continued to be of significant magnitude over the range of debond lengths considered.

Glaessgen, E. H.↗

Microstructure Modeling of 3rd Generation Disk Alloy

The objective of this initiative, funded by NASA's Aviation Safety Program, is to model, validate, and predict, with high fidelity, the microstructural evolution of third-generation high-refractory Ni-based disc superalloys during heat treating and service conditions. This initiative is a natural extension of the DARPA-AIM (Accelerated Insertion of Materials) initiative with GE/Pratt-Whitney and with other process simulation tools. Strong collaboration with the NASA Glenn Research Center (GRC) is a key component of this initiative and the focus of this program is on industrially relevant disk alloys and heat treatment processes identified by GRC. Employing QuesTek s Computational Materials Dynamics technology and PrecipiCalc precipitation simulator, physics-based models are being used to achieve high predictive accuracy and precision. Combining these models with experimental data and probabilistic analysis, "virtual alloy design" can be performed. The predicted microstructures can be optimized to promote desirable features and concurrently eliminate nondesirable phases that can limit the reliability and durability of the alloys. The well-calibrated and well-integrated software tools that are being applied under the proposed program will help gas turbine disk alloy manufacturers, processing facilities, and NASA, to efficiently and effectively improve the performance of current and future disk materials.

Jou, Herng-Jeng↗

Virtual VMASC: A 3D Game Environment

The advantages of creating interactive 3D simulations that allow viewing, exploring, and interacting with land improvements, such as buildings, in digital form are manifold and range from allowing individuals from anywhere in the world to explore those virtual land improvements online, to training military personnel in dealing with war-time environments, and to making those land improvements available in virtual worlds such as Second Life. While we haven't fully explored the true potential of such simulations, we have identified a requirement within our organization to use simulations like those to replace our front-desk personnel and allow visitors to query, naVigate, and communicate virtually with various entities within the building. We implemented the Virtual VMASC 3D simulation of the Virginia Modeling Analysis and Simulation Center (VMASC) office building to not only meet our front-desk requirement but also to evaluate the effort required in designing such a simulation and, thereby, leverage the experience we gained in future projects of this kind. This paper describes the goals we set for our implementation, the software approach taken, the modeling contribution made, and the technologies used such as XNA Game Studio, .NET framework, Autodesk software packages, and, finally, the applicability of our implementation on a variety of architectures including Xbox 360 and PC. This paper also summarizes the result of our evaluation and the lessons learned from our effort.

Manepalli, Suchitra↗

NASA Tech Briefs, January 2003

Topics covered include: Optoelectronic Tool Adds Scale Marks to Photographic Images; Compact Interconnection Networks Based on Quantum Dots; Laterally Coupled Quantum-Dot Distributed-Feedback Lasers; Bit-Serial Adder Based on Quantum Dots; Stabilized Fiber-Optic Distribution of Reference Frequency; Delay/Doppler-Mapping GPS-Reflection Remote-Sensing System; Ladar System Identifies Obstacles Partly Hidden by Grass; Survivable Failure Data Recorders for Spacecraft; Fiber-Optic Ammonia Sensors; Silicon Membrane Mirrors with Electrostatic Shape Actuators; Nanoscale Hot-Wire Probes for Boundary-Layer Flows; Theodolite with CCD Camera for Safe Measurement of Laser-Beam Pointing; Efficient Coupling of Lasers to Telescopes with Obscuration; Aligning Three Off-Axis Mirrors with Help of a DOE; Calibrating Laser Gas Measurements by Use of Natural CO2; Laser Ranging Simulation Program; Micro-Ball-Lens Optical Switch Driven by SMA Actuator; Evaluation of Charge Storage and Decay in Spacecraft Insulators; Alkaline Capacitors Based on Nitride Nanoparticles; Low-EC-Content Electrolytes for Low-Temperature Li-Ion Cells; Software for a GPS-Reflection Remote-Sensing System; Software for Building Models of 3D Objects via the Internet; "Virtual Cockpit Window" for a Windowless Aerospacecraft; CLARAty Functional-Layer Software; Java Library for Input and Output of Image Data and Metadata; Software for Estimating Costs of Testing Rocket Engines; Energy-Absorbing, Lightweight Wheels; Viscoelastic Vibration Dampers for Turbomachine Blades; Soft Landing of Spacecraft on Energy-Absorbing Self-Deployable Cushions; Pneumatically Actuated Miniature Peristaltic Vacuum Pumps; Miniature Gas-Turbine Power Generator; Pressure-Sensor Assembly Technique; Wafer-Level Membrane-Transfer Process for Fabricating MEMS; A Reactive-Ion Etch for Patterning Piezoelectric Thin Film; Wavelet-Based Real-Time Diagnosis of Complex Systems; Quantum Search in Hilbert Space; Analytic Method for Computing Instrument Pointing Jitter; and Semiselective Optoelectronic Sensors for Monitoring Microbes.

Source record↗

Development of Molten Salt Reactor Modeling and Simulation Capabilities in VERA

In recent years, the nuclear community has seen a resurgence of interest in molten salt reactors (MSRs). Because of their molten, flowing fuel, MSRs present several new challenges not present in many other reactors, necessitating tightly coupled multiphysics modeling and simulation for accurate analysis. The Virtual Environment for Reactor Applications (VERA) has been developed to provide a high-fidelity multiphysics framework for reactor analysis. Though it was originally developed for light water reactor applications, VERA’s multiphysics capabilities make for a natural extension to MSR analysis. Recent efforts have focused on capturing the effects of moving fuel. A lumped depletion capability has been added that accounts for the moving and mixing of the fuel, as well as time spent outside the active core. A general multi-phase species transport module has also been added to track the movement and evolution of salt constituents as the salt flows through the core and around the primary loop. This paper presents a discussion of the new MSR capabilities in VERA, along with results for the lumped depletion and species transport capabilities for the Molten Salt Reactor Experiment, demonstrating VERA’s effectiveness in multiphysics simulations of MSRs.

Graham, Aaron↗

SMART Model Comparison App

Presented at the DOE-NETL 2020 Virtual Meeting - SMART Initiative Annual Review Meeting November 2-3, 2020, 11/2

Hill, Brandon↗

TEAL Output Visualization

Tool for Economic Analysis (TEAL) is an open-source economics calculation package written and maintained by Idaho National Laboratory (INL). As a plugin of the Risk Analysis Virtual ENvironment (RAVEN), TEAL provides economics analysis models to RAVEN workflow users. In addition, TEAL is used in other RAVEN plugins such as LOGOS and the Holistic Energy Resource Optimization Network (HERON) to complement other analyses with economic calculations. This report documents the efforts in developing the capability of TEAL output visualization for users to better understand and investigate TEAL simulation results. In the past, outputs (e.g., various cash flows) were generated and printed to screen. According to the need and purpose for visualization, users can select various bar charts and donut charts to visualize the cash flows including inflows, outflows, and net cash flows in each year or in a selected time range, in addition to observing data stored in comma-separated value files (CSVs). The visualization capability is flexible and user-friendly by introducing several user-defined parameters, for instance, the start and the end project year of interest and the type of colors to be assigned to the cash flows.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Digital ionosonde studies of F-region waves

Accurate fixed-frequency virtual height data collected on a digital ionosonde are analyzed to measure speed and direction of traveling ionospheric disturbances by matching the experimental data with virtual height and echo amplitude obtained from a simple model of the disturbed ionosphere. Several data records analyzed in this manner indicate speeds of 400 to 680 m/sec and a direction of propagation from north to south. The digital ionosonde collects virtual height data with a time resolution of 10 sec and a height resolution of less than 300 m.

Harper, R. M.↗

AAPM Truth‐based CT (TrueCT) reconstruction grand challenge

Background: This Special Report summarizes the 2022, AAPM grand challenge on Truth-based CT image reconstruction. Purpose: To provide an objective framework for evaluating CT reconstruction methods using virtual imaging resources consisting of a library of simulated CT projection images of a population of human models with various diseases. Methods: Two hundred unique anthropomorphic, computational models were created with varied diseases consisting of 67 emphysema, 67 lung lesions, and 66 liver lesions. The organs were modeled based on clinical CT images of real patients. The emphysematous regions were modeled using segmentations from patient CT cases in the COPDGene Phase I dataset. For the lung and liver lesion cases, 1–6 malignant lesions were created and inserted into the human models, with lesion diameters ranging from 5.6 to 21.9 mm for lung lesions and 3.9 to 14.9 mm for liver lesions. The contrast defined between the liver lesions and liver parenchyma was 82 ± 12 HU, ranging from 50 to 110 HU. Similarly, the contrast between the lung lesions and the lung parenchyma was defined as 781 ± 11 HU, ranging from 725 to 805 HU. For the emphysematous regions, the defined HU values were −950 ± 17 HU ranging from −918 to −979 HU. The developed human models were imaged with a validated CT simulator. The resulting CT sinograms were shared with the participants. The participants reconstructed CT images from the sinograms and sent back their reconstructed images. Further, the reconstructed images were then scored by comparing the results against the corresponding ground truth values. The scores included both task-generic (root mean square error [RMSE] and structural similarity matrix [SSIM]), and task-specific (detectability index [d’] and lesion volume accuracy) metrics. For the cases with multiple lesions, the measured metric was averaged across all the lesions. To combine the metrics with each other, each metric was normalized to a range of 0 to 1 per disease type, with “0” and “1” being the worst and best measured values across all cases of the disease type for all received reconstructions. Results: The True-CT challenge attracted 52 participants, out of which 5 successfully completed the challenge and submitted the requested 200 reconstructions. Across all participants and disease types, SSIM absolute values ranged from 0.22 to 0.90, RMSE from 77.6 to 490.5 HU, d’ from 0.1 to 64.6, and volume accuracy ranged from 1.2 to 753.1 mm3. The overall scores demonstrated that participant “A” had the best performance in all categories, except for the metrics of d’ for lung lesions and RMSE for liver lesions. Participant “A” had an average normalized score of 0.41 ± 0.22, 0.48 ± 0.32, and 0.42 ± 0.33 for the emphysema, lung lesion, and liver lesion cases, respectively. Conclusions: The True-CT challenge successfully enabled objective assessment of CT reconstructions with the unique advantage of access to a diverse population of diseased human models with known ground truth. This study highlights the significant potential of virtual imaging trials in objective assessment of medical imaging technologies.

60 APPLIED LIFE SCIENCES↗

STRUCTURE FORMATION BY FIFTH FORCE: POWER SPECTRUM FROM N-BODY SIMULATIONS

We lay out the framework to numerically study nonlinear structure formation in the context of scalar-field-coupled cold dark matter models ({psi}CDM models) where the scalar field {psi} serves as dynamical dark energy. Adopting parameters for the scalar field that leave negligible effects on the cosmic microwave background (CMB) spectrum, we generate the initial conditions for our N-body simulations. The simulations follow the spatial distributions of dark matter and the scalar field, solving their equations of motion using a multilevel adaptive grid technique. We show that the spatial configuration of the scalar field depends sensitively on the local density field. The {psi}CDM model differs from standard {lambda}CDM at small scales with observable modifications of, e.g., the mass function of halos as well as the matter power spectrum. Nevertheless, the predictions of both models for the Hubble expansion and the CMB spectrum are virtually indistinguishable. Hence, galaxy cluster counts and weak lensing observations, which probe structure formation at small scales, are needed to falsify this class of models.

79 ASTRONOMY AND ASTROPHYSICS↗

Gamma-ray bursts from sheared Alfven waves

The physical process by which sheared Alfven waves can accelerate electrons to a Lorentz factor of 10,000 to 100,000 within 5 km of the stellar surface is applied to a study of gamma-ray bursts, taking both resonant and nonresonant scattering into account. Several very encouraging features of the model are discussed. Although the field is oscillatory, virtually all the charges are ejected from the system, resulting in very little backheating of the stellar surface. The particle number density is accounted for naturally in terms of BA0 and m, which in principle are known from the physical manifestation of the agent causing the crustal disturbance. The resulting gamma-ray spectrum compares very favorably with the observation. The model restricts the geometry of the emission region, in the sense that only the Compton upscattering of soft photons from a warm polar cap can produce the correct spectral shape.

Melia, Fulvio↗

First Principles Modeling of the Thermal Amine Scrubber Flight Experiment’s Chemical Performance

The removal of atmospheric CO2 from a spacecraft is of particular importance to NASA’s mission, and is an area of continual study and technological advancement. One of the more recent advancements has been with reusable sorbents being regenerated with a combination of heat and vacuum. One such technology is the Thermal Amine Scrubber (TAS) flight experiment on the ISS, though several others are currently flying or preparing to fly. A model was created of the TAS to predict chemical performance, using fundamental chemistry and physics based on principles rather than empirical relations. Since the physical laws are true across all conditions, such a model enables greater model accuracy outside the bounds of test data, and allows for virtual testing of the hardware at conditions that are prohibitively difficult or expensive to actually test. This paper details the model’s development, operation, and correlation to data from the flight unit. The model is then compared to a data set taken from the flight unit under different flow, CO2 partial pressure, and bed configuration conditions, resulting in only a 2% error. The equations and principles laid forth in this paper are applicable to a wide range of thermally regenerated sorbents, and additional models of a similar nature would allow for potentially the most straightforward and direct method of comparison of technologies available to date.

CO2 removal↗

Coupled Multiphysics Primary Loop Simulations of the Mk1-FHR in the Virtual Test Bed

To support advanced reactor demonstrations, the Virtual Test Bed (VTB) [1] repository hosts a wide range of challenge problems for showcasing modeling and simulation capabil- ities in support of advanced reactor demonstrations. This document presents a coupled multiphysics model of the Mark 1 pebble-bed fluoride-salt-cooled high-temperature reactor (PB-FHR). The analysis leverages NEAMS tools (Griffin [2], SAM [3], Pronghorn [4], and the MOOSE [5] heat con- duction module) for core neutronics, thermal hydraulics of the core and primary loop, and multiscale fuel performance simulations. The analysis was entirely created by coupling standalone simulations of the reactor that were previously available on the VTB. All input files and documentation de- veloped for this example are available on the VTB website: mooseframework.inl.gov/ virtual_test_bed/ . This model was featured in the National Reactor Innovation Cen- ter Tech Talk presented in December 2021.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Squark contributions to photon structure functions and positivity constraints

Photon structure functions in supersymmetric QCD are investigated in terms of the parton model where squark contributions are evaluated. We calculate the eight virtual photon structure functions by taking the discontinuity of the squark massive one-loop diagrams of the photon-photon forward amplitude. The model-independent positivity constraints derived from the Cauchy-Schwarz inequalities are satisfied by the squark parton model calculation and actually the two equality relations hold for the squark contribution. We also show that our polarized photon structure function g{sub 1}{sup {gamma}} for the real photon leads to the vanishing first moment sum rule, and the constraint |g{sub 1}{sup {gamma}}|{<=}F{sub 1}{sup {gamma}} is satisfied by the real photon. We also discuss a squark signature in the structure function W{sub TT}{sup {tau}}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geothermal Power Systems Analysis: Outcome of Industry Stakeholders Workshop

Geothermal cost and performance evaluation implemented via techno-economic assessment (TEA) modeling is critical for the U.S. Department of Energy (DOE) and other geothermal industry stakeholders in assessing the current state of geothermal technologies and to identify existing hurdles to commercially viable geothermal development. The Geothermal Electricity Technology Evaluation Model (GETEM) is a major TEA tool used in estimating the economic feasibility and levelized cost of energy (LCOE) of conventional hydrothermal systems and enhanced geothermal systems (EGS). Since 2021, GETEM has been transitioning from an intricate spreadsheet model to a user-friendly tool within the System Advisor Model (SAM) developed by the National Renewable Energy Laboratory (NREL). Apart from enabling an expanded visibility of the geothermal model among other renewable resources, having GETEM in SAM has the advantage of simulation automation, better usability, updates tracking, active user inputs/feedback, and extended financial modeling. GETEM is used in developing supply curves for NREL's Annual Technology Baseline (ATB), which provides inputs to the Renewable Energy Potential (reV) and the Regional Energy Deployment System (ReEDS) models. The geothermal module in NREL's reV model assesses the geothermal energy potential in the conterminous United States by defining the geospatial intersection of geothermal resources with existing grid infrastructure within the constraint of land use characteristics. The ReEDS model is a capacity expansion model used for simulating the long-term build-out and operation of the U.S. generation and transmission system based on current energy costs and policies. To ensure enhanced representation of current industry trends in our model transitions and development, we organized a two-day virtual workshop to elicit geothermal industry stakeholder input and recommendations on our current approaches and assumptions on techno-economic, resource assessment, and deployment scenarios modeling of geothermal technologies. Participants included developers, operators, investors, regulatory agencies, system modelers, national laboratory researchers, consultants, and other stakeholders. In this workshop, we gained stakeholder insights on current geothermal plant performance (i.e., capacity factors), updated drilling costs and learning curves, and next-generation technologies such as closed-loop and superhot rock geothermal. Other outcomes from this workshop and its impact on future geothermal development feasibility, resource availability, and capacity expansion studies are compiled and discussed.

annual technology baseline↗

Analysis of an Averaging Operator for Atomic-to-Continuum Coupling Methods by the Arlequin Approach

A new coupling term for blending particle and continuum models with the Arlequin framework is investigated in this work. The coupling term is based on an integral operator defined on the overlap region that matches the continuum and particle solutions in an average sense. The present exposition is essentially the continuation of a previous work (Bauman et al., On the application of the Arlequin method to the coupling of particle and continuum models, Computational Mechanics, 42, 511–530, 2008) in which coupling was performed in terms of an H 1-type norm. In that case, it was shown that the solution of the coupled problem was mesh-dependent or, said in another way, that the solution of the continuous coupled problem was not the intended solution. This new formulation is now consistent with the problem of interest and is virtually mesh-independent when considering a particle model consisting of a distribution of heterogeneous bonds. The mathematical properties of the formulation are studied for a one-dimensional model of harmonic springs, with varying stiffness parameters, coupled with a linear elastic bar, whose modulus is determined by classical homogenization. Numerical examples are presented for one-dimensional and two-dimensional model problems that illustrate the approximation properties of the new coupling term and the effect of mesh size.

97 MATHEMATICS AND COMPUTING↗