Search NASA⌕ Search

SEARCH · Search NASA

Results for “active solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Spin‐Orbit Effects in a Thallium Borohydride Stabilized by Coordination to Bis(diisopropylamino)Cyclopropenylidene (BAC)

The reaction of Tl(OTf) with 2 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) in THF results in formation of [Tl(BAC) 2 (OTf)] (1) in moderate yields. Subsequent reaction of 1 with [K][H 2 -9-BBN] ([H 2 -9-BBN] − = dihydrido 9-boratabicyclo[3.3.1]nonane) in THF results in formation of [Tl(BAC)(μ-H 2 -9-BBN)] 2 (3), also in moderate yield. Complex 3 is the first reported thallium borohydride. We attribute its thermal stability to the strong donor ability of the BAC co-ligand. Both 1 and 3 exhibit trigonal pyramidal geometries about Tl + in the solid-state, indicative of the presence of stereochemically active lone pairs. The hydride environment in 3 is calculated to exhibit a 3.9 ppm downfield shift attributed to spin-orbit effects from the adjacent Tl center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of nanoparticle-immobilized cellulase for improved ethanol yield in simultaneous saccharification and fermentation reactions

Ethanol yields were 2.1 (P = 0.06) to 2.3 (P = 0.01) times higher in simultaneous saccharification and fermentation (SSF) reactions of microcrystalline cellulose when cellulase was physisorbed on silica nanoparticles compared to enzyme in solution. In SSF reactions, cellulose is hydrolyzed to glucose by cellulase while yeast simultaneously ferments glucose to ethanol. The 35 C temperature and the presence of ethanol in SSF reactions are not optimal conditions for cellulase. Immobilization onto solid supports can stabilize the enzyme and promote activity at non-optimum reaction conditions. Mock SSF reactions that did not contain yeast were used to measure saccharification products and identify the mechanism for the improved ethanol yield using immobilized cellulase. Cellulase adsorbed to 40 nm silica nanoparticles produced 1.6 times (P = 0.01) more glucose than cellulase in solution in 96 h at pH 4.8 and 35 C. There was no significant accumulation (<250 {mu}g) of soluble cellooligomers in either the solution or immobilized enzyme reactions. This suggests that the mechanism for the immobilized enzyme's improved glucose yield compared to solution enzyme is the increased conversion of insoluble cellulose hydrolysis products to soluble cellooligomers at 35 C and in the presence of ethanol. The results show that silica-immobilized cellulase can be used to produce increased ethanol yields in the conversion of lignocellulosic materials by SSF.

09 BIOMASS FUELS↗

Organic sulfur from source to sink in low‐sulfate Lake Superior

Abstract Organic sulfur plays a crucial role in the biogeochemistry of aquatic sediments, especially in low sulfate (< 500 μ M) environments like freshwater lakes and the Earth's early oceans. To better understand organic sulfur cycling in these systems, we followed organic sulfur in the sulfate‐poor (< 40 μ M) iron‐rich (30–80 μ M) sediments of Lake Superior from source to sink. We identified microbial populations with shotgun metagenomic sequencing and characterized geochemical species in porewater and solid phases. In anoxic sediments, we found an active sulfur cycle fueled primarily by oxidized organic sulfur. Sediment incubations indicated a microbial capacity to hydrolyze sulfonates, sulfate esters, and sulfonic acids to sulfate. Gene abundances for dissimilatory sulfate reduction ( dsrAB ) increased with depth and coincided with sulfide maxima. Despite these indicators of sulfide formation, sulfide concentrations remain low (< 40 nM) due to both pyritization and organic matter sulfurization. Immediately below the oxycline, pyrite accounted for 13% of total sedimentary sulfur. Both free and intact lipids in this same interval accumulated disulfides, indicating rapid sulfurization even at low concentrations of sulfide. Our investigation revealed a new model of sulfur cycling in a low‐sulfate environment that likely extends to other modern lakes and possibly the ancient ocean, with organic sulfur both fueling sulfate reduction and consuming the resultant sulfide.

Phillips, Alexandra A.↗

Evolution of the lithium morphology from cycling of thin film solid state batteries

Thin film batteries with a Lipon electrolyte and Li metal anode can be cycled thousands of times. During this time there is a gradual redistribution of the lithium at the top surface; the morphology that develops depends on a number of factors but is largely driven by dewetting. In this work, this redistribution is characterized as functions of the cycle number, duty cycle, cathode composition, and protective coating over the lithium. Observations of wrinkled and pitted surfaces are discussed considering the effects of defects and diffusion in the lithium and influences of film stresses and surface energy. In conclusion, similar processes may impact solid state lithium batteries with higher energy per active area.

25 ENERGY STORAGE↗

Applications of XPS in the characterization of Battery materials

In this study, technological development requires reliable power sources where energy storage devices are emerging as a critical component. Wide range of energy storage devices, Redox-flow batteries (RFB), Lithium ion based batteries (LIB), and Lithium-sulfur (LSB) batteries are being developed for various applications ranging from grid-scale level storage to mobile electronics. Material complexities associated with these energy storage devices with unique electrochemistry are formidable challenge which needs to be address for transformative progress in this field. X-ray photoelectron spectroscopy (XPS) - a powerful surface analysis tool - has been widely used to study these energy storage materials because of its ability to identify, quantify and image the chemical distribution of redox active species. However, accessing the deeply buried solid-electrolyte interfaces (which dictates the performance of energy storage devices) has been a challenge in XPS usage. Herein we report our recent efforts to utilize the XPS to gain deep insight about these interfaces under realistic conditions with varying electrochemistry involving RFB, LIB and LSB.

25 ENERGY STORAGE↗

Cyclic carbonate for highly stable cycling of high voltage lithium metal batteries

The lithium metal battery (LMB) is one of the most promising next-generation battery systems due to its ultrahigh energy density. However, problematic dendrite formation and low Coulombic efficiency (CE) greatly limit its practical application. Carbonate electrolyte solvents are still indispensable for the operation of LMBs using a transition metal oxide cathode. We determined the impact of different cyclic carbonates, which actively participate in the formation of the solid-electrolyte interface (SEI), on the stable cycling of LMBs using a nickel-rich layered cathode LiN i0.6 Mn 0.2 Co 0.2 O 2 (NMC622). The substitution of fluorine atoms in the cyclic carbonate profoundly enhances the stability of the lithium metal anode while fluoroalkyl and alkoxy substituents are detrimental. Cyclic carbonate trans-difluoroethylene carbonate (DFEC) was identified as a novel SEI enabler on the lithium metal anode, facilitating the formation of a protective SEI with relatively high lithium fluoride content. A Li/NMC622 cell utilizing DFEC electrolyte solvent as SEI enabler displayed a capacity retention larger than 82% after 400 cycles and an average CE of 99.95%. In contrast, the cycling retention after 400 cycles for a Li/NMC622 cell using monofluoroethylene carbonate was only 31% with an average CE of 99.73 %. Other fluoroalkyl or alkoxy cyclic carbonates do not provide improved stabilization of the lithium metal anode over ethylene carbonate. The fundamental studies in this work provide critical insight for the further development of advanced electrolytes in LMBs

25 ENERGY STORAGE↗

A highly active hybrid catalyst modified (La 0.60 Sr 0.40 ) 0.95 Co 0.20 Fe 0.80 O 3-δ cathode for proton conducting solid oxide fuel cells

The sluggish reaction kinetics in the cathode usually leads to considerable cathode polarization resistance, hindering the development of proton conducting solid oxide fuel cells (H-SOFCs) operated at intermediate temperatures (400–650 °C). In this paper, to address this problem, for the first time, a novel hybrid catalyst consisting of PrNi 0.5 Mn 0.5 O 3 and PrOx is impregnated in the (La 0.60 Sr 0.40 ) 0.95 Co 0.20 Fe 0.80 O 3-δ (LSCF) cathode of H-SOFCs, resulting in significant enhancement of the cathode reaction kinetics. Single cells with impregnated LSCF cathode and BaZr 0.8 Y 0.2 O 3 (BZY) electrolyte yield a maximum power density (MPD) of 0.198 W cm -2 at 600 °C, more than doubled of that with blank LSCF cathode (0.083 W cm -2 ). ECR and EIS studies reveal that the hybrid catalyst can substantially accelerate the oxygen-ion transfer and oxygen dissociation-absorption processes in the cathode, resulting in significantly lower polarization resistance and higher MPD. In addition, the hybrid catalyst possesses good chemical and microstructural stability at 600 °C. Consequently, the single cells with impregnated LSCF cathode show excellent durability. Finally, this study shows that the impregnation of this novel hybrid catalyst in the cathode could be a promising approach to improve the performance and stability of H-SOFCs.

36 MATERIALS SCIENCE↗

3D printed transparent ceramic YAG laser rods: Matching the core-clad refractive index

Yttrium Aluminum Garnet (YAG) solid state laser gain media rods with an active Neodymium-doped core and an optically-clear cladding region were additively manufactured via direct-ink-writing (DIW), followed by sintering and hot isostatic pressing to form fully dense optical ceramics. Lutetium and Gadolinium were chosen as optically-inert co-doping ions in the clad to match the increase in refractive index caused by the Neodymium in the core. Additionally, either 11.6% Lutetium or 3.8% Gadolinium can be used to match the index change from 2% neodymium; however, differences in diffusion distances across the core-clad interface lead to large fluctuations in index in that region. These index fluctuations can be minimized either by matching dopants with similar diffusion distances, or by implementing a gradual gradient in the doping profile, possible through DIW, rather than a sharp compositional interface attainable via more standard fabrication methods. This improvement in index homogeneity resulted in a 40% improvement in lasing performance compared with that of a core-clad rod fabricated with a sharp interface between the doped and undoped regions.

36 MATERIALS SCIENCE↗

Roles of Chemical Functionality and Pore Curvature in the Design of Nanoporous Proton Conductors

Nanoporous proton-transporting media are critical components in fuel cells and other electrochemical devices, yet general molecular design criteria for new materials with enhanced performance remain obscure. Aqueous lyotropic liquid crystals (LLCs) comprise a platform for detailed studies of the molecular-level features governing proton transport in monodisperse, water-filled nanopores lined with well-defined chemical functionalities. Here, we report new alkylsulfonic acid LLCs that exhibit H+ conductivities as high as σ = 380 mS/cm at 80°C, which rival those of more acidic, perfluorinated polymers, thus demonstrating that the acidity of the pore functionality is not the sole determinant of proton transport. Direct experimental comparisons of LLCs with convex and concave nanopores of similar dimensions indicate that H+ conductivities therein sensitively depend on the hydration state of the acid functionalities and the pore curvature. These experiments suggest that judicious manipulation of pore curvature provides a new means for optimizing the activities of proton-exchange membranes and nanoporous solid acid catalysts.

36 MATERIALS SCIENCE↗

Nanophotonics for Chemical Imaging and Spectroscopy

The manipulation of light and light-matter interactions on the nanoscale is enabled by the unique optical properties of plasmonic metal nanostructures and nanoparticles. Indeed, engineered hybrid molecular-plasmonic nanostructures have enabled single molecule detection and identification via surface-enhanced Raman scattering (SERS). Further, the same effect is at the core of visualizing single molecules with sub-nanometer spatial resolution via tip-enhanced Raman scattering (TERS). More generally, modern applications of plasmon-enhanced spectroscopy and microscopy fueled advances in fields as diverse as quantum and semiconductor materials, heterogeneous catalysis, and the health sciences, to name a few. All these exciting developments and many more are touched in this virtual special issue (VSI) on nanophotonics. From ultra-precise chemical imaging measurements performed in a scanning tunneling microscope chamber to single molecule spectroscopic measurements performed at solid-air and solid-liquid interfaces, this VSI includes contributions from active practitioners that are all striving to better-understand increasingly complex interfaces encountered in the biological, materials, and chemical sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-Pot Pyrolysis Method to Fabricate Carbon Nanotube Supported Ni Single-Atom Catalysts with Ultrahigh Loading

The practical application of single atom catalysts (SACs) is constrained by the low achievable loading of single metal atoms. In this work, nickel SACs stabilized on a nitrogen-doped carbon nanotube structure (NiSA-N-CNT) with ultrahigh Ni atomic loading up to 20.3 wt % have been successfully synthesized using a new one-pot pyrolysis method employing Ni acetylacetonate (Ni(acac) 2 ) and dicyandiamide (DCD) as precursors. The yield and formation of NiSA-N-CNT depends strongly on the Ni(acac) 2 /DCD ratio and annealing temperature. Pyrolysis at 350 and 650 °C led to the formation of Ni single atom dispersed melem and graphitic carbon nitride (Ni-melem and Ni-g-C 3 N 4 ). Transition from a stacked and layered Ni-g-C 3 N 4 structure to a bamboo-shaped tubular NiSA-N-CNT structure most likely occurs via a solid-to-solid curling or rolling-up mechanism, thermally activated at temperatures of 700–900 °C. Extended X-ray absorption fine structure (EXAFS) experiments and simulations show that Ni single atoms are stabilized in the N-CNT structure through nitrogen coordination, forming a structure with four nearest N coordination shell surrounded by two carbon shells, Ni–N 4 . The NiSA-N-CNT catalysts show an excellent activity and selectivity for the electrochemical reduction of CO 2 , achieving a turnover frequency (TOF) of 11.7 s–1 at -0.55 V (vs RHE), but a low activity for the O 2 reduction and O 2 evolution reactions, as compared to Ni nanoparticles supported on N-CNTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical Signatures of Transiently Disordered Semiconductor Nanocrystals

The remarkable optoelectronic properties of semiconductor nanocrystals (NCs) have led to efforts to integrate them as the active material in light-emitting diodes, solid-state-lighting, and lasers. Understanding related high carrier injection conditions is therefore critical as resultant thermal effects can impact optical properties. The physical integrity of the NC is indeed questionable as recent transient X-ray diffraction studies have suggested that NCs reversibly lose crystalline order, or melt, under high fluence photoexcitation. Informed by such studies, here, we examine CdSe NCs under elevated fluences to determine the impact of disordering on optical properties. To this end, we implement intensity-dependent transient absorption using both one- and two-pump methods where the latter effectively subtracts out the NC optical signatures associated with lower fluence photoexcitation, especially band-edge features. At elevated fluences, we observe a long-lived induced absorption to the red of the bandgap across a wide range of sizes that follows power dependent trends and kinetics consistent with the prior transient X-ray measurements. NC photoluminescence studies provide further evidence that melting influences optical properties. These methods of characterizing bandgap narrowing caused by NC disordering could facilitate improved optical amplification and band-edge emission at high excitation density.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Solid-State NMR Study of Li-Assisted Dehydrogenation of Ammonia Borane

The mechanism of thermochemical dehydrogenation of the 1:3 mixture of Li3AlH6 and NH3BH3 (AB) has been studied by the extensive use of solid-state NMR spectroscopy and theoretical calculations. The activation energy for the dehydrogenation is estimated to be 110 kJ mol–1, which is lower than for pristine AB (184 kJ mol–1). The major hydrogen release from the mixture occurs at 60 and 72 °C, which compares favorably with pristine AB and related hydrogen storage materials, such as lithium amidoborane (LiNH2BH3, LiAB). The NMR studies suggest that Li3AlH6 improves the dehydrogenation kinetics of AB by forming an intermediate compound (LiAB)x(AB)1–x. A part of AB in the mixture transforms into LiAB to form this intermediate, which accelerates the subsequent formation of branched polyaminoborane species and further release of hydrogen. The detailed reaction mechanism, in particular the role of lithium, revealed in the present study highlights new opportunities for using ammonia borane and its derivatives as hydrogen storage materials.

36 MATERIALS SCIENCE↗

Energy efficient microwave synthesis of mesoporous Ce 0.5 M 0.5 O 2 (Ti, Zr, Hf) nanoparticles for low temperature CO oxidation in an ionic liquid – a comparative study

Ce 0.5 M 0.5 O 2 (M = Ti, Zr, Hf) nanoparticles have been successfully synthesized by microwave irradiation in the ionic liquid [C 4 mim][Tf 2 N] (1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide). The morphology, crystallinity, and chemical composition of the obtained materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and N 2 –adsorption measurements. XRD and Raman spectroscopy analyses confirmed the formation of solid solutions with cubic fluorite structure. The catalytic activities of the Ce 0.5 M 0.5 O 2 (M = Ti, Zr, Hf) nanoparticles were investigated in the low-temperature oxidation of CO. Ce 0.5 Zr 0.5 O 2 nanospheres exhibit the best performance (100% conversion at 350 °C), followed by Ce 0.5 Hf 0.5 O 2 (55% conversion at 360 °C) and Ce 0.5 Ti 0.5 O 2 (11% conversion at 350 °C). Heating the as-prepared Ce 0.5 Zr 0.5 O 2 to 600 °C for extended time leads to a decrease in surface area and, as expected decreased catalytic activity. Depending on the ionic liquid the obtained Ce 0.5 Zr 0.5 O 2 exhibits different morphologies, varying from nano-spheres in [C 4 mim][Tf 2 N] and [P 66614 ][Tf 2 N] (P 66614 = trishexyltetradecylphosphonium) to sheet-like assemblies in [C 3 mimOH][Tf 2 N] (C 3 mimOH = 1-(3-hydroxypropyl)-3-methylimidazolium). As a result, the microwave synthesis superiority to other heating methods like sonochemical synthesis and conventional heating was proven by comparative experiments where the catalytic activity of Ce 0.5 Zr 0.5 O 2 obtained by alternate methods such as conventional heating was found to be poorer than that of the microwave-synthesised material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beta Beams for Neutrino Production

This paper gives an overview of the work done so far to produce sufficient neutrino fluxes for neutrino oscillation physics using beta beams. The design study on a beta beam scenario, the EURISOL (European Isotope Separation On-Line Radioactive Ion Beam Facility) Design Study, a project funded by the European Commission (EC), is now ready to be published. The study is based on the acceleration of {sup 6}He and {sup 18}Ne ions to produce the (anti-)neutrino beam using the existing CERN infrastructure for acceleration of the ions. We will here briefly describe the work with emphasis on how potential showstoppers, in particular radiation safety and equipment damage, have been dealt with. New results for the production of {sup 6}He show very encouraging results. We are now confident that this ion is a good choice to produce antineutrinos. However, the ion production needed for the physics experiments could not, up to now, be reasonably satisfied for {sup 18}Ne. Therefore, studies of alternative beta emitters, {sup 8}Li and {sup 8}B, with properties interesting for physics reach, have been proposed. The production of these ions is studied within the EC funded EUROnu project, ''A High Intensity Neutrino Oscillation Facility for Europe.'' This project will end in 2012. A small storage ring, in which the beam traverses a target, creating the {sup 8}Li and {sup 8}B isotopes that will be collected and accelerated, is studied in this proposal. We present the latest developments for the production of these ions, including a production ring lattice. Extensive Geant4 simulations have been done with the aim of developing a model of the production target that can be used for simulations of the necessary cooling system. In this paper we present the status of the work performed and an overview of ongoing and planned activities to make the beta beam project a solid proposal for neutrino production within the EUROnu project.

43 PARTICLE ACCELERATORS↗

Photoluminescence properties and energy levels of RE (RE = Pr, Sm, Er, Tm) in layered-CaZnOS oxysulfide

RE{sup 3+} (RE = Pr, Sm, Er, Tm)-activated CaZnOS samples were prepared by a solid-state reaction method at high temperature, and their photoluminescence properties were investigated. Doping with RE{sup 3+} (RE = Pr, Sm, Er, Tm) into layered-CaZnOS resulted in typical RE{sup 3+} (RE = Pr, Sm, Er, Tm) f-f line absorptions and emissions, as well as the charge transfer band of Sm{sup 3+} at about 3.3 eV. The energy level scheme containing the position of the 4f and 5d levels of all divalent and trivalent lanthanide ions with respect to the valence and conduction bands of CaZnOS has been constructed based on the new data presented in this work, together with the data from literature on Ce{sup 3+} and Eu{sup 2+} doping in CaZnOS. The detailed energy level scheme provides a platform for interpreting the optical spectra and could be used to comment on the valence stability of the lanthanide ions in CaZnOS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗