Search NASA⌕ Search

SEARCH · Search NASA

Results for “algorithmic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Millimeter-Wave Imaging Radiometer (MIR) Data Processing and Development of Water Vapor Retrieval Algorithms

This document describes the final report of the Millimeter-wave Imaging Radiometer (MIR) Data Processing and Development of Water Vapor Retrieval Algorithms. Volumes of radiometric data have been collected using airborne MIR measurements during a series of field experiments since May 1992. Calibrated brightness temperature data in MIR channels are now available for studies of various hydrological parameters of the atmosphere and Earth's surface. Water vapor retrieval algorithms using multichannel MIR data input are developed for the profiling of atmospheric humidity. The retrieval algorithms are also extended to do three-dimensional mapping of moisture field using continuous observation provided by airborne sensor MIR or spaceborne sensor SSM/T-2. Validation studies for water vapor retrieval are carried out through the intercomparison of collocated and concurrent measurements using different instruments including lidars and radiosondes. The developed MIR water vapor retrieval algorithm is capable of humidity profiling under meteorological conditions ranging from clear column to moderately cloudy sky. Simulative water vapor retrieval studies using extended microwave channels near 183 and 557 GHz strong absorption lines indicate feasibility of humidity profiling to layers in the upper troposphere and improve the overall vertical resolution through the atmosphere.

Chang, L. Aron↗

The Structure and Evolution of LOCBURST: The BATSE Burst Location Algorithm

The gamma-ray burst (GRB) location algorithm used to produce the BATSE GRB locations is described. The general flow of control of the current location algorithm is presented, and the significant properties of the various physical inputs required are identified. The development of the burst location algorithm during the releases of the BATSE IB, 2B, and 3B GRB catalogs is presented so that the reasons for the differences in the positions and error estimates between the catalogs can be understood. In particular, differences between the 2B and 3B locations are discussed for events that have moved significantly and the reasons for the changes explained. The locations of bursts located independently by the interplanetary network (IPN) are used to illustrate the effect on burst location accuracy of various components of the algorithm. IPN data and locations from other gamma-ray instruments are used to calculate estimates of the systematic errors on BATSE burst locations.

Pendleton, Geoffrey N.↗

Intercomparison of Various Algorithms in Determining Convective and Stratiform Precipitation

The paper presents the intercomparison of various algorithms in determining the convective and stratiform precipitation in tropical convection. The latent heat released from precipitation is the driving mechanism for the general circulation of the atmosphere and exhibits different vertical profile in convective and stratiform regimes of the tropical convection. The primary goal of this paper is to evaluate the performance of the operational convective/stratiform algorithm that is employed by the NASA Tropical Rainfall Measuring Mission (TRMM) ground validation program. The operational algorithm is based on the texture of radar reflectivity field at constant altitude. The TRMM ground validation program continuously monitors the tropical convection through ground based radar and rain gauge network at selected sites around the tropics and generates the rainfall products including the convective/stratiform rainfall map that can readily be used by the TRMM satellite program. An evaluation and improvement of these rainfall products requires additional measurements that can be available through field campaigns. The data used in this study was collected during the second phase of the Texas Florida Underflights (TEFLUN-B) field campaign in East Central Florida, a primary site of the TRMM ground validation program. The TEFLUN-B field campaign was conducted in August and September 1998 in support of the NASA Tropical Rainfall Measuring Mission (TRMM) satellite observations. An objective of the TEFLUN-B field campaign was to obtain the ground based precipitation measurements of Florida convection at different temporal and spatial scales. The field campaign had various components of precipitation measurements including dual wavelength precipitation profiler, various types of disdrometers and rain gauges, collocated about 40 km southwest of Melbourne NEXRAD radar. In this study, we examine the profiler based reflectivity and Doppler velocity and the disdrometer based drop size distribution observations to evaluate the operational scanning radar (i.e. NEXRAD) based convective/stratiform algorithm.

Tokay, Ali↗

A Modified NASA Team Sea Ice Algorithm for the Antarctic

A recent comparative study of the NASA Team and Bootstrap passive microwave sea ice algorithms revealed significantly different sea ice concentration retrievals in some parts of the Antarctic. The study identified potential reasons for the discrepancies including the influence of sea ice temperature variability on the Bootstrap retrievals and the influence of ice surface reflectivity on the horizontally polarized emissivity in the NASA Team retrievals. In this study, we present a modified version of the NASA Team algorithm which reduces the error associated with the use of horizontally polarized radiance data, while retaining the relative insensitivity to ice temperature variations provided by radiance ratios. By retaining the 19 GHz polarization as an independent variable, we also maintain a relatively large dynamic range in sea ice concentration. The modified algorithm utilizes the 19 GHz polarization (PR19) and both gradient ratios, GRV and GRH defined by (37V-19V)/(37V+19V) and (37H-19H)/(37H+19H), respectively, rather than just GRV used in the current NASA Team algorithm. A plot of GRV versus GRH shows that the preponderance of points lie along a quadratic curve, whereas those points affected by surface reflectivity anomalies deviate from this curve. This serves as a method of identifying the problems points. The 19H brightness temperature of these problem points is increased so they too fall along quadratic curve. Sea ice concentrations derived from AVHRR imagery illustrate the extent to which this method reduces the error associated with surface layering.

Cavalieri, Donald J.↗

Progress in AMSR Snow Algorithm Development

Advanced Microwave Scanning Radiometer (AMSR) will be flown on-board of the Japanese Advanced Earth Observing Satellite-II (ADEOS-II) and United States Earth Observation System (EOS) PM-1 satellite. AMSR is a passive microwave radiometer with frequency ranges from 6.9 GHz to 89 GHz. It scans conically with a constant incidence angle of 55 deg at the Earth's surface. The swath width is about 1600 km. With a large antenna, AMSR will provide the best spatial resolution of multi-frequency radiometer from space. This provides us an opportunity to improve the snow parameter retrieval. Accurate determination of snow parameters from space is a challenging effort. Over the years, many different techniques have been used to account for the complicated snow parameters such as the density, stratigraphy, snow grain size, temperature variation of the snow-pack. Forest type, fractional forest cover and land use type also need to be considered in developing an improved retrieval algorithm. However, snow is such a dynamic variable, snow-pack parameter keeps changing once the snow is deposited on the earth surface. Currently, NASDA and NASA are developing AMSR snow retrieval algorithms. These algorithms are now being carefully tested and evaluated using the SSM/I data. Due to limited snow-pack data available for comparison, this activity is progressing slowly. However, it is clear that in order to improve the snow retrieval algorithm, it is necessary to model the metamorphism history of the snow-pack.

Chang, Alfred↗

The Structure of Evolution LOCBURST: The BATSE Burst Location Algorithm

The gamma-ray bursts (GRB) location algorithm used to produce the BATSE GRB locations is described. The general flow of control of the current location algorithm is presented and the significant properties of the various physical inputs required are identified. The development of the burst location algorithm during the releases of the BATSE 1B, 2B, and 3B gamma-ray burst catalogs is presented so that the reasons for the differences in the positions and error estimates between the catalogs can be understood. In particular, differences between the 2B and 3B locations are discussed for events that have moved significantly and the reasons for the changes explained. The locations of bursts located independently by the interplanetary network are used to illustrate the effect on burst location accuracy of various components of the algorithm. IPN data as well as locations from other gamma-ray instruments are used to calculate estimates of the systematic errors on BATSE burst locations.

Pendleton, Geoffrey N.↗

A Diagonal Algorithm for the Method of Pseudocompressibility

The method of pseudocompressibility has been found to be an efficient method for obtaining a steady-state solution to the incompressible Navier-Stokes equations. Recent improvements to this method include the use of a diagonal scheme for the inversion of the equations equations at each iteration. The necessary transformations have been derived for the pseudocompressibility equations in generalized coordinates. The diagonal algorithm reduces the computing time necessary to obtain a steady-state solution by a factor of nearly three. Implicit viscous terms are maintained in the equations, and it has become possible to use fourth-order implicit dissipation. The steady-state solution is unchanged by the approximations resulting from the diagonalization of the equations. Computed results for flow over a two-dimensional backward-facing step and a three-dimensional cylinder mounted normal to a flat plate are presented for both the old and new algorithms. The computing efficiency of these algorithms are compared. Identical solutions are obtained from both algorithms which compare well with experimental results.

Rogers, Stuart E.↗

Simulation of Long Lived Tracers Using an Improved Empirically-Based Two-Dimensional Model Transport Algorithm

We have developed a new empirically-based transport algorithm for use in our GSFC two-dimensional transport and chemistry assessment model. The new algorithm contains planetary wave statistics, and parameterizations to account for the effects due to gravity waves and equatorial Kelvin waves. We will present an overview of the new algorithm, and show various model-data comparisons of long-lived tracers as part of the model validation. We will also show how the new algorithm gives substantially better agreement with observations compared to our previous model transport. The new model captures much of the qualitative structure and seasonal variability observed methane, water vapor, and total ozone. These include: isolation of the tropics and winter polar vortex, the well mixed surf-zone region of the winter sub-tropics and mid-latitudes, and the propagation of seasonal signals in the tropical lower stratosphere. Model simulations of carbon-14 and strontium-90 compare fairly well with observations in reproducing the peak in mixing ratio at 20-25 km, and the decrease with altitude in mixing ratio above 25 km. We also ran time dependent simulations of SF6 from which the model mean age of air values were derived. The oldest air (5.5 to 6 years) occurred in the high latitude upper stratosphere during fall and early winter of both hemispheres, and in the southern hemisphere lower stratosphere during late winter and early spring. The latitudinal gradient of the mean ages also compare well with ER-2 aircraft observations in the lower stratosphere.

Fleming, Eric L.↗

An Improved Neutron Transport Algorithm for Space Radiation

A low-energy neutron transport algorithm for use in space radiation protection is developed. The algorithm is based upon a multigroup analysis of the straight-ahead Boltzmann equation by using a mean value theorem for integrals. This analysis is accomplished by solving a realistic but simplified neutron transport test problem. The test problem is analyzed by using numerical and analytical procedures to obtain an accurate solution within specified error bounds. Results from the test problem are then used for determining mean values associated with rescattering terms that are associated with a multigroup solution of the straight-ahead Boltzmann equation. The algorithm is then coupled to the Langley HZETRN code through the evaporation source term. Evaluation of the neutron fluence generated by the solar particle event of February 23, 1956, for a water and an aluminum-water shield-target configuration is then compared with LAHET and MCNPX Monte Carlo code calculations for the same shield-target configuration. The algorithm developed showed a great improvement in results over the unmodified HZETRN solution. In addition, a two-directional solution of the evaporation source showed even further improvement of the fluence near the front of the water target where diffusion from the front surface is important.

Heinbockel, John H.↗

Algorithm for Atmospheric and Glint Corrections of Satellite Measurements of Ocean Pigment

An algorithm is developed to correct satellite measurements of ocean color for atmospheric and surface reflection effects. The algorithm depends on taking the difference between measured and tabulated radiances for deriving water-leaving radiances. 'ne tabulated radiances are related to the measured radiance where the water-leaving radiance is negligible (670 nm). The tabulated radiances are calculated for rough surface reflection, polarization of the scattered light, and multiple scattering. The accuracy of the tables is discussed. The method is validated by simulating the effect of different wind speeds than that for which the lookup table is calculated, and aerosol models different from the maritime model for which the table is computed. The derived water-leaving radiances are accurate enough to compute the pigment concentration with an error of less than q 15% for wind speeds of 6 and 10 m/s and an urban atmosphere with aerosol optical thickness of 0.20 at lambda 443 nm and decreasing to 0.10 at lambda 670 nm. The pigment accuracy is less for wind speeds less than 6 m/s and is about 30% for a model with aeolian dust. On the other hand, in a preliminary comparison with coastal zone color scanner (CZCS) measurements this algorithm and the CZCS operational algorithm produced values of pigment concentration in one image that agreed closely.

Fraser, Robert S.↗

Advanced Algorithms and High-Performance Testbed for Large-Scale Site Characterization and Subsurface Target Detecting Using Airborne Ground Penetrating SAR

A team of US Army Corps of Engineers, Omaha District and Engineering and Support Center, Huntsville, let Propulsion Laboratory (JPL), Stanford Research Institute (SRI), and Montgomery Watson is currently in the process of planning and conducting the largest ever survey at the Former Buckley Field (60,000 acres), in Colorado, by using SRI airborne, ground penetrating, Synthetic Aperture Radar (SAR). The purpose of this survey is the detection of surface and subsurface Unexploded Ordnance (UXO) and in a broader sense the site characterization for identification of contaminated as well as clear areas. In preparation for such a large-scale survey, JPL has been developing advanced algorithms and a high-performance restbed for processing of massive amount of expected SAR data from this site. Two key requirements of this project are the accuracy (in terms of UXO detection) and speed of SAR data processing. The first key feature of this testbed is a large degree of automation and a minimum degree of the need for human perception in the processing to achieve an acceptable processing rate of several hundred acres per day. For accurate UXO detection, novel algorithms have been developed and implemented. These algorithms analyze dual polarized (HH and VV) SAR data. They are based on the correlation of HH and VV SAR data and involve a rather large set of parameters for accurate detection of UXO. For each specific site, this set of parameters can be optimized by using ground truth data (i.e., known surface and subsurface UXOs). In this paper, we discuss these algorithms and their successful application for detection of surface and subsurface anti-tank mines by using a data set from Yuma proving Ground, A7, acquired by SRI SAR.

Fijany, Amir↗

An Improved Elastic and Nonelastic Neutron Transport Algorithm for Space Radiation

A neutron transport algorithm including both elastic and nonelastic particle interaction processes for use in space radiation protection for arbitrary shield material is developed. The algorithm is based upon a multiple energy grouping and analysis of the straight-ahead Boltzmann equation by using a mean value theorem for integrals. The algorithm is then coupled to the Langley HZETRN code through a bidirectional neutron evaporation source term. Evaluation of the neutron fluence generated by the solar particle event of February 23, 1956, for an aluminum water shield-target configuration is then compared with MCNPX and LAHET Monte Carlo calculations for the same shield-target configuration. With the Monte Carlo calculation as a benchmark, the algorithm developed in this paper showed a great improvement in results over the unmodified HZETRN solution. In addition, a high-energy bidirectional neutron source based on a formula by Ranft showed even further improvement of the fluence results over previous results near the front of the water target where diffusion out the front surface is important. Effects of improved interaction cross sections are modest compared with the addition of the high-energy bidirectional source terms.

Clowdsley, Martha S.↗

Ultrasound Algorithm Derivation for Soil Moisture Content Estimation

Soil moisture content can be estimated by evaluating the velocity at which sound waves travel through a known volume of solid material. This research involved the development of three soil algorithms relating the moisture content to the velocity at which sound waves moved through dry and moist media. Pressure and shear wave propagation equations were used in conjunction with soil property descriptions to derive algorithms appropriate for describing the effects of moisture content variation on the velocity of sound waves in soils with and without complete soil pore water volumes, An elementary algorithm was used to estimate soil moisture contents ranging from 0.08 g/g to 0.5 g/g from sound wave velocities ranging from 526 m/s to 664 m/s. Secondary algorithms were also used to estimate soil moisture content from sound wave velocities through soils with pores that were filled predominantly with air or water.

Belisle, W.R.↗

Synthesizing Dynamic Programming Algorithms from Linear Temporal Logic Formulae

The problem of testing a linear temporal logic (LTL) formula on a finite execution trace of events, generated by an executing program, occurs naturally in runtime analysis of software. We present an algorithm which takes an LTL formula and generates an efficient dynamic programming algorithm. The generated algorithm tests whether the LTL formula is satisfied by a finite trace of events given as input. The generated algorithm runs in linear time, its constant depending on the size of the LTL formula. The memory needed is constant, also depending on the size of the formula.

Rosu, Grigore↗

Obstacle Detection Algorithms for Rotorcraft Navigation

In this research we addressed the problem of obstacle detection for low altitude rotorcraft flight. In particular, the problem of detecting thin wires in the presence of image clutter and noise was studied. Wires present a serious hazard to rotorcrafts. Since they are very thin, their detection early enough so that the pilot has enough time to take evasive action is difficult, as their images can be less than one or two pixels wide. After reviewing the line detection literature, an algorithm for sub-pixel edge detection proposed by Steger was identified as having good potential to solve the considered task. The algorithm was tested using a set of images synthetically generated by combining real outdoor images with computer generated wire images. The performance of the algorithm was evaluated both, at the pixel and the wire levels. It was observed that the algorithm performs well, provided that the wires are not too thin (or distant) and that some post processing is performed to remove false alarms due to clutter.

Kasturi, Rangachar↗

Sensitivity of Global Sea-Air CO2 Flux to Gas Transfer Algorithms, Climatological Wind Speeds, and Variability of Sea Surface Temperature and Salinity

Sensitivity analyses of sea-air CO2 flux to gas transfer algorithms, climatological wind speeds, sea surface temperatures (SST) and salinity (SSS) were conducted for the global oceans and selected regional domains. Large uncertainties in the global sea-air flux estimates are identified due to different gas transfer algorithms, global climatological wind speeds, and seasonal SST and SSS data. The global sea-air flux ranges from -0.57 to -2.27 Gt/yr, depending on the combination of gas transfer algorithms and global climatological wind speeds used. Different combinations of SST and SSS global fields resulted in changes as large as 35% on the oceans global sea-air flux. An error as small as plus or minus 0.2 in SSS translates into a plus or minus 43% deviation on the mean global CO2 flux. This result emphasizes the need for highly accurate satellite SSS observations for the development of remote sensing sea-air flux algorithms.

McClain, Charles R.↗

Adaptive Load-Balancing Algorithms using Symmetric Broadcast Networks

In a distributed computing environment, it is important to ensure that the processor workloads are adequately balanced, Among numerous load-balancing algorithms, a unique approach due to Das and Prasad defines a symmetric broadcast network (SBN) that provides a robust communication pattern among the processors in a topology-independent manner. In this paper, we propose and analyze three efficient SBN-based dynamic load-balancing algorithms, and implement them on an SGI Origin2000. A thorough experimental study with Poisson distributed synthetic loads demonstrates that our algorithms are effective in balancing system load. By optimizing completion time and idle time, the proposed algorithms are shown to compare favorably with several existing approaches.

Das, Sajal K.↗

Wire Detection Algorithms for Navigation

In this research we addressed the problem of obstacle detection for low altitude rotorcraft flight. In particular, the problem of detecting thin wires in the presence of image clutter and noise was studied. Wires present a serious hazard to rotorcrafts. Since they are very thin, their detection early enough so that the pilot has enough time to take evasive action is difficult, as their images can be less than one or two pixels wide. Two approaches were explored for this purpose. The first approach involved a technique for sub-pixel edge detection and subsequent post processing, in order to reduce the false alarms. After reviewing the line detection literature, an algorithm for sub-pixel edge detection proposed by Steger was identified as having good potential to solve the considered task. The algorithm was tested using a set of images synthetically generated by combining real outdoor images with computer generated wire images. The performance of the algorithm was evaluated both, at the pixel and the wire levels. It was observed that the algorithm performs well, provided that the wires are not too thin (or distant) and that some post processing is performed to remove false alarms due to clutter. The second approach involved the use of an example-based learning scheme namely, Support Vector Machines. The purpose of this approach was to explore the feasibility of an example-based learning based approach for the task of detecting wires from their images. Support Vector Machines (SVMs) have emerged as a promising pattern classification tool and have been used in various applications. It was found that this approach is not suitable for very thin wires and of course, not suitable at all for sub-pixel thick wires. High dimensionality of the data as such does not present a major problem for SVMs. However it is desirable to have a large number of training examples especially for high dimensional data. The main difficulty in using SVMs (or any other example-based learning method) is the need for a very good set of positive and negative examples since the performance depends on the quality of the training set.

Kasturi, Rangachar↗