Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Sorption Behavior of Eu(III) into CSH Gel in Imitated Saline Groundwater - 12145

The sorption behavior of Eu(III) (europium (III)) into CSH (Calcium Silicate Hydrate) gel without dried processes was examined in imitated saline groundwater by using the spectro-fluorometer, Raman spectrophotometer and ICP-AES (Inductively Coupled Plasma- Atomic Emission Spectrometry). Ca/Si ratio was set to 0.4, 0.8, 1.2 and 1.6, and NaCl concentration was also set to 0.6, 0.06 and 0.006. The synthesis of each sample was conducted in a glove box saturated with nitrogen gas. The sealed sample tubes were gently shaken with 120 strokes/min. The time-period to contact Eu(III) with the CSH gel was set to 60 days. The fluorescence emission spectra suggested the incorporation of Eu{sup 3+} into CSH gel in the high Ca/Si ratio samples. On the other hand, from the decay behavior of fluorescence emission spectra, even in the low Ca/Si ratio samples, sorption behavior of Eu{sup 3+} into CSH gel was confirmed. Besides, the Raman spectra showed that the degree of polymerization of Si-O in CSH gel was raised with increasing Na ions concentration. These results suggest that the CSH gel, formed as secondary mineral, would retard the migration of radionuclides even in saline groundwater. Considering the inflow of saline groundwater into repository, this study examined the interaction between CSH gel (without dry processes) and Eu{sup 3+} by using the fluorescence emission spectra, the decay behavior of fluorescence and the Raman spectra. As a result, the fluorescence emission spectra of the sample of more than 0.8 Ca/Si ratio confirmed the intensity split into two peaks around 618 nm (5D0→7F2 transition). Furthermore, even in relatively low Ca/Si ratio samples, the fluorescence lifetimes both of the surface sorption sample and the co-precipitated samples exceeded that of the filtrate sample. These suggested that Eu{sup 3+} is not only hydrolyzed to form Eu(OH){sub 3} colloid, but is also stably incorporated into CSH gel (in Ca/Si ratio>1.2) or is forming complex on the surface of solid phase (in Ca/Si<0.8) in the co-presence of Na ions. On the other hand, the concentrations of Na, Ca and Si after 60 days in the solution filtrated through 0.2 μm membrane filter showed the ion exchange of Ca and Eu apparently in the samples of low Ca/Si ratio. Besides, in the samples with high Ca/Si ratio, Ca and Si concentrations in the solution were raised with increment of initial Na concentration. While Na ions may slightly increase the solubility of CSH gel, the CSH samples were stable, mostly maintaining the initial Ca/Si ratio synthesized. Moreover, the Raman spectra showed that the degree of polymerization of silicate chain in CSH samples increased with increasing Na concentration. Such an immobilized Na into the structure of CSH gel did not obstruct the incorporation of Eu{sup 3+} into CSH gel. The results mentioned above suggested that CSH gel (formed as a secondary mineral around the repository) also can retard the migration of radionuclides even if the repository and its surrounding are saturated by saline groundwater. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis and Photophysical Properties of Light-Harvesting Gold Nanoclusters Fully Functionalized with Antenna Chromophores

The development of efficient light-harvesting systems is important to understand the key aspects of solar-energy conversion processes and to utilize them in various photonic applications. In this study, atomically well-defined gold nanoclusters are reported as a new platform to fabricate artificial light-harvesting systems. An efficient amide coupling method is developed to synthesize water-soluble Au 22 clusters fully protected with pyrene chromophores by taking advantage of their facile phase-transfer reaction. The synthesized Au 22 clusters with densely packed 18 pyrene chromophores (Au 22 –PyB 18 ) exhibit triple-emission in blue, green, and red wavelength regions arising respectively from pyrene monomer, pyrene excimer, and Au 22 emission, producing bright white light emission together. The photoluminescence of Au 22 is enhanced by more than tenfold, demonstrating that pyrenes at the periphery efficiently channel the absorbed energy to the luminescent Au 22 at the center. A combination of femtosecond transient absorption and anisotropy measurements of Au 22 –PyB 18 explicitly reveals three main decay components of 220 fs, 3.5 ps, and 160 ps that can be assigned to energy migration between pyrenes and energy transfer processes from pyrene monomer and excimer to the central Au 22 , respectively.

14 SOLAR ENERGY↗

Conductive spinels derived from Co–Mn based alloy precursor for SOFC cathode-side contact application

The utilization of gas-atomized Co–Mn based alloy precursor is a promising approach to lowering the sintering temperature of the spinel contact layer and enhancing its performance. In this work, simulated interconnect/contact/cathode cells are employed to investigate the effects of different metallic precursors (i.e., three Co–Mn based alloy powders and a mixture of Co + MnO 2 powders) on the microstructure and performance of the reactively-sintered MnCo 2 O 4 -based contact layer. While excellent overall electrical performance is observed for all the cells with the four contact precursors during 1000-h testing at 800 °C in air, the cell with the Ce-doped alloy contact precursor shows the lowest cell area specific resistance (ASR) and ASR degradation rate. Cross-sectional observation of the tested cells is conducted to assess the compatibility of the contact layer with adjacent components as well as its effectiveness in reducing the Cr 2 O 3 scale growth and blocking Cr migration from the interconnect to the cathode.

08 HYDROGEN↗

Charge Transition of Oxygen Vacancies during Resistive Switching in Oxide-Based RRAM

Resistive random-access memory (RRAM) devices have attracted broad interest as promising building blocks for high-density nonvolatile memory and neuromorphic computing applications. Atomic level thermodynamic and kinetic descriptions of resistive switching (RS) processes are essential for continued device design and optimization but are relatively lacking for oxide-based RRAMs. It is generally accepted that RS occurs due to the redistribution of charged oxygen vacancies driven by an external electric field. However, this assumption contradicts the experimentally observed stable filaments, where the high vacancy concentration should lead to a strong Coulomb repulsion and filament instability. In this work, through predictive atomistic calculations in combination with experimental measurements, we attempt to understand the interactions between oxygen vacancies and the microscopic processes that are required for stable RS in a Ta 2 O 5 -based RRAM. We propose a model based on a series of charge transition processes that explains the drift and aggregation of vacancies during RS. The model was validated by experimental measurements where illuminated devices exhibit accelerated RS behaviors during SET and RESET. The activation energies of ion migration and charge transition were further experimentally determined through a transient current measurement, consistent with the modeling results. Finally, our results help provide comprehensive understanding on the internal dynamics of RS and will benefit device optimization and applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous Energy Generation and Flow Enhancement (Electroslippage Effect) in Polyelectrolyte Brush Functionalized Nanochannels

Energy generation through nanofluidics is a topic of great nanotechnological relevance. In this work, we conduct all-atom molecular dynamics (MD) simulations of the transport of water and ions in a pressure-driven flow in nanochannels grafted with charged polyelectrolyte (PE) brushes and discover the possibility of simultaneous electrokinetic energy generation and flow enhancement (henceforth denoted as the electroslippage effect). Such PE-brush-functionalized nanochannels have been recently shown to demonstrate an overscreening (OS) effect (characterized by the presence of a greater number of screening counterions within the PE brush layer than needed to screen the PE brush charges), a consequent presence of excess coions within the PE brush-free bulk, and a coion-driven electroosmotic (EOS) transport in the presence of small to moderate applied axial electric fields. Here, however, we find that the streaming current, which represents the current generated by the flow-driven downstream advection of the charge imbalance present within the electric double layer (EDL) that screen the PE brush charges, is governed by the migration of the counterions. This stems from the fact that the highest contribution to the overall streaming current arises from the region near the PE brush-water interface (where there is an excess of counterions), while the brush-free bulk yields a hitherto unreported, but small, coion-dictated streaming current. This downstream advection of the charge imbalance (and the resultant counterion-driven streaming current) eventually leads to the development of an electric field (streaming electric field) in the direction that is opposite to the direction of the counterion-driven streaming current. The streaming current and the streaming electric field interact to generate the electrokinetic energy. Equally importantly, this streaming electric field induces an EOS transport, which becomes coion-driven, due to the presence of excess coions in the brush-free bulk. For the case of nanochannels grafted with negatively charged PE brushes, the streaming electric field will be in a direction that is opposite to the pressure-driven transport, and hence the coion (or anion) driven EOS flow, will be in the same direction as the pressure-driven transport. On the other hand, for the case of nanochannels grafted with positively charged PE brushes, the streaming electric field will be in the same direction as the pressure-driven flow, and hence the coion (or cation) driven EOS flow, will again be in the same direction as the pressure-driven flow. Therefore, whenever there occurs the presence of the OS and the resulting coion-driven EOS transport in PE brush grafted nanochannels, regardless of the sign of the charges of the PE brushes, this EOS transport will always aid the pressure-driven transport and will cause the most fascinating increase in the net volume flow rate across the nanochannel cross section, which is the electroslippage effect.

overscreening↗

Migration and generation of contaminants from launch through recovery: LDEF case history

The migration of contaminants to and between Long Duration Exposure Facility (LDEF) surfaces reveals new information relevant to all future space missions. The surface of the LDEF satellite closely paralleled over seven meters of the shuttle during one launch and one reentry. Transfer of contaminants from the shuttle bay to the payload were documented and partially quantified for both the launch and recovery separately. LDEF carried a load of volatile silicones and hydrocarbons into orbit which were then polymerized by UV radiation into tough, dark brown stains on exposed surfaces. The distribution of these stains is providing new information on deposition mechanisms that should be studied on future missions. Electrostatic effects, diffusional flow, and effects due to small surface temperature differences at the time of UV exposure are suggested. The types of functional groups present in the LDEF deposit it nearly identical to stains recovered from other spacecraft. These stains were remarkably stable in low Earth orbit even with atomic oxygen exposure if the amount of silicones present was sufficient to create a sealing layer of silicon dioxide over the dark brown stain beneath.

Crutcher, E. Russ↗

Structural Basis of Focal Adhesion Localization of LIM-only Adaptor PINCH by Integrin-linked Kinase

The LIM-only adaptor PINCH (the particularly interesting cysteine- and histidine-rich protein) plays a pivotal role in the assembly of focal adhesions (FAs), supramolecular complexes that transmit mechanical and biochemical information between extracellular matrix and actin cytoskeleton, regulating diverse cell adhesive processes such as cell migration, cell spreading, and survival. A key step for the PINCH function is its localization to FAs, which depends critically on the tight binding of PINCH to integrin-linked kinase (ILK). Here we report the solution NMR structure of the core ILK {center_dot} PINCH complex (28 kDa, K{sub D} {approx} 68 nm) involving the N-terminal ankyrin repeat domain (ARD) of ILK and the first LIM domain (LIM1) of PINCH. We show that the ILK ARD exhibits five sequentially stacked ankyrin repeat units, which provide a large concave surface to grip the two contiguous zinc fingers of the PINCH LIM1. The highly electrostatic interface is evolutionally conserved but differs drastically from those of known ARD and LIM bound to other types of protein domains. Consistently mutation of a hot spot in LIM1, which is not conserved in other LIM domains, disrupted the PINCH binding to ILK and abolished the PINCH targeting to FAs. These data provide atomic insight into a novel modular recognition and demonstrate how PINCH is specifically recruited by ILK to mediate the FA assembly and cell-extracellular matrix communication.

59 BASIC BIOLOGICAL SCIENCES↗

From Vibrational Spectroscopy to Force Fields and Structures of Saccharides: New Computational Algorithms and Applications

This work was undertaken with the main objective to investigate basic reactions that take place in relatively simple saccharides (mono-saccharides and cellobiose - the building block of cellulose) , in isolation and in cluster with few water molecules or with (gas-phase) clusters of few waters and ionic compounds (salt, isolated ions like H + or OH - ). Within the context of this work, different potentials were investigated; among them, were the PM3 semi empirical potential, DFT/BLYP and a new hybrid potential constructed from MP2 for the harmonic part and from adjusted Hartree-Fock anharmonic interactions (VSCF-PT2). These potentials were evaluated by comparison with experimental data from published sources and from several collaborating groups. The findings show excellent agreement between experiments and predictions with the hybrid VSCF-PT2 potential and very good agreement with predictions obtained from dynamics with dispersion corrected DFT/BLYP potential. Investigation of hydration of cellobiose, was another topic of interest. Guided by a hydration motif demonstrated by our experimental collaborators (team of Prof J.P. Simons), we demonstrated large energetic and structural differences between the two species of cellobiose: cis and trans. The later, which is dominant in solid and liquid phases, is higher in energy in the gas-phase and compared to pure water, it does not disturb as much the network of H bonds. In contrast, the cis species exhibits asymmetric hydration in cluster with up to 25 waters, indicating that it has surfactant properties. Another highlight of this research effort was the successful first time spectrometric and spectroscopic study of a gas-phase protonated sugar derivative (alpha-D-Galactopyranoside) and its interpretation by Ab Initio molecular dynamics (AIMD) simulations. The findings demonstrate the formation of a motif in which a proton bridges between two Oxygen atoms (belonging to OH groups) at the sugar; The vibrational bands involving the shared proton were strongly shifted to lower frequencies ( by about ~ 500 cm -1 for the symmetric mode, in this case). A similar motif was also observed recently by us in protonated cellobiose, indicating that this might be a common mechanism for interaction of a proton with sugars, perhaps similar to the proton wires observed in proteins. The simulations with protonated sugars also shed light on different mechanisms of interaction of a sugar with a proton, including formation of a carboxonium ion, mutarotation events, ring puckering and in the disaccharide cellobiose, the breaking of the glycosidic bond (in both forms of cis and trans). One final highlight to note in this summary, is the finding that in the monosaccharide beta-D-Galactose a hydroxyl ion abstracts a proton (forming water) in a barrierless process at room temperature, but the water remains bound to the sugar backbone, though it migrates around it; actual degradation occurs at ~500 K when water leaves the sugar. However, the study also shows that the water abstraction reaction can be reversed in the presence of 2 additional water molecules complexed with the sugar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and application of a uranium mononitride (UN) potential: Thermomechanical properties and Xe diffusion

We report that atomic-scale modeling of thermophysical and defect properties of uranium mononitride (UN) plays an important role in establishing a better understanding and improved models of UN fuel performance. Having an accurate interatomic potential is crucial for generating reliable data at finite temperatures using molecular dynamic simulations. We report a new interatomic potential for UN, based on a combination of many-body and pairwise interactions, a simple form that we later show could be easily adapted to include Xe-U and Xe-N interactions, i.e., generating a U-N-Xe interatomic potential. The potential was fitted to experimental thermal expansion and single crystal elastic constants, as well as Frenkel, Schottky, anti-Schottky, and antisite pair reaction energies from density functional theory (DFT) calculations. Using the potential, we successfully reproduced experimental lattice parameters, thermal expansion, single crystal elastic constants, and temperature dependent heat capacity. The potential also performs reasonably well in reproducing the energy of the aforementioned stoichiometric defect reactions and defect migration barriers calculated using DFT. However, the potential underestimates the energy difference between the tetrahedral and dumbbell uranium interstitials, and a more complex potential form might be needed to overcome this issue. The potential was also used to predict UN single crystal elastic constants and elastic properties at different temperatures, showing that UN becomes softer and more compressible with increasing temperature. We also compare our potential against literature data from previous empirical potentials, demonstrating similar or better behavior depending on the property of interest. To enable the simulation of Xe in UN a Buckingham potential has been fitted to DFT-derived Xe incorporation energies. The potential was then used to determine the activation energy for Xe diffusion due to various Xe-containing defects, with {XeU : VU} exhibiting the lowest activation energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Deformation in Nuclear Graphite and Underlying Mechanisms

Time-dependent deformation in nuclear graphite is influenced by the creation and migration of radiation-induced defects in the reactor environment. This study investigates the role of pre-existing defects such as point defect clusters and Mrozowski cracks in nuclear graphite IG-110. Separate specimens were irradiated with a 2.8 MeV Au 2+ beam with a fluence of 4.38 × 10 14 cm −2 and an 8 MeV C 2+ beam with a fluence of 1.24 × 10 16 cm −2 . Microscopic specimens were either mechanically loaded inside a transmission electron microscope (TEM) or subjected to ex situ indentation-based creep loading. In situ TEM tests showed significant plasticity in regions highly localized around the Mrozowski cracks, resembling slip or ripplocation bands. Slip bands were also seen near regions without pre-existing defects but at very high stresses. Ex situ self-ion irradiation embrittled the specimens and decreased the creep displacement and rate, while heavy ion irradiation resulted in the opposite behavior. We hypothesize that the large-sized gold ions (compared to the carbon atoms) induced interplanar swelling as well as cross-plane channels for increased defect mobility. These findings illustrate the role of pre-existing defects in the dynamic relaxation of stresses during irradiation and the need for more studies into the radiation environment’s impact on the mechanical response of nuclear graphite.

creep deformation↗

Bias-Modulated ALD of ZnO: Insights into Precursor-Surface Interactions for ZnO Films

Atomic layer deposition (ALD) is widely used to deposit conformal thin films but is often limited in the tunability of the resulting material’s properties. Substrate bias and electric fields alter precursor-surface interactions and provide means to tune material properties. To explore this, we performed zinc oxide (ZnO) ALD using diethylzinc (DEZ) and water on silicon native oxide substrates at 150 °C in a sample holder designed to create a static electrical field by biasing one plate of a parallel plate capacitor-style sample holder during deposition. ZnO films prepared in an electric field/on a biased sample holder were thinner, changed relative crystalline composition, and contained more carbon compared to samples grown in identical sample holders without bias. The thickness was independent of the magnitude of the eletric field between plates, indicating that the primary driver for the change was substrate biasing not the electric field between plates of the parallel plate capacitor-style sample holder. Density functional theory calculations showed enhanced electron migration between dissociatively adsorbed DEZ molecules and the ZnO (002) facet with increasing force from an electric field at the substrate surface, which strengthens the electronic interactions between the surface and the adsorbate. These models offer a compelling explanation for the inhibited growth, changes in the crystallinity, and increase in carbon content of films grown in an electric field/on biased plates.

Jones, Jessica C. (ORCID:0000000174754620)↗

Hydrogen migration in inner-shell ionized halogenated cyclic hydrocarbons

Abstract We have studied the fragmentation of the brominated cyclic hydrocarbons bromocyclo-propane, bromocyclo-butane, and bromocyclo-pentane upon Br(3 d ) and C(1 s ) inner-shell ionization using coincidence ion momentum imaging. We observe a substantial yield of CH 3 + fragments, whose formation requires intramolecular hydrogen (or proton) migration, that increases with molecular size, which contrasts with prior observations of hydrogen migration in linear hydrocarbon molecules. Furthermore, by inspecting the fragment ion momentum correlations of three-body fragmentation channels, we conclude that CH x + fragments (with x = 0, …, 3) with an increasing number of hydrogens are more likely to be produced via sequential fragmentation pathways. Overall trends in the molecular-size-dependence of the experimentally observed kinetic energy releases and fragment kinetic energies are explained with the help of classical Coulomb explosion simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoreduction of 99 Tc Pertechnetate by Nanometer-Sized Metal Oxides: New Strategies for Formation and Sequestration of Low-Valent Technetium

Technetium-99 ( 99 Tc)(β - max : 293.7 keV; t 1/2 : 2.1 x 10 5 years) is a byproduct of uranium-235 fission and comprises a large component of radioactive waste. Under aerobic conditions and in a neutral- basic environment, the pertechnetate anion ( 99 TcO 4 - ) is stable. 99 TcO 4 - is very soluble, migrates easily through the environment and does not sorb well onto mineral surfaces, soils or sediments. This study moves forward a new strategy for the reduction of TcO 4 - and chemical incorporation of the reduced 99 Tc into a metal oxide material. This strategy employs a single material, a polyoxometalate (POM), α 2- [P 2 W 17 O 61 ] 10- , that can be photoactivated in the presence of 2-propanol to transfer electrons to TcO 4 - and incorporate the reduced 99 Tc covalently into the α 2 - framework to form the Tc V O species, Tc V O(α 2- P 2 W 17 O 61 ) 7- . This occurs via the formation of an intermediate species that slowly converts to Tc V O(α 2- P 2 W 17 O 61 ) 7- . EXAFS and XANES analysis and preliminary EPR analysis, suggests that the intermediate consists of a Tc(IV) α 2 - species where the 99 Tc is likely bound to only 2 of the 4 W-O oxygen atoms in the α 2- [P 2 W 17 O 61 ] 10- defect. This intermediate then oxidizes and converts to the 99 Tc V O(α 2- P 2 W 17 O 61 ) 7- product. The reduction and incorporation of 99 TcO 4- was accomplished in a ''one pot'' reaction using both sunlight and UV irradiation, and monitored as a function of time using multinuclear NMR and radio TLC. The process was further probed by the ''step-wise'' generation of reduced α 2- P 2 W 17 O 61 12- through bulk electrolysis followed by the addition of TcO 4 - . The reduction and incorporation of ReO 4 - , as a non-radioactive surrogate for 99 Tc, does not proceed through the intermediate species, and Re V O is incorporated quickly into the α 2- [P 2 W 17 O 61 ] 10- defect. These observations are consistent with the periodic trends of 99 Tc and Re. Specifically, 99 Tc is more easily reduced compared to Re. In addition to serving as models for metal oxides, POMs may also provide a suitable platform to study the molecular level dynamics and mechanisms of the reduction and incorporation of Tc into a material.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Atomic Structural Origin of the High Methanol Selectivity over In 2 O 3 –Metal Interfaces: Metal–Support Interactions and the Formation of a InO x Overlayer in Ru/In 2 O 3 Catalysts during CO 2 Hydrogenation

CO 2 hydrogenation to methanol is of great environmental and economic interest due to its potential to reduce carbon emissions and produce valuable chemicals in one single reaction. Compared with the unmodified traditional Cu/ZnO/Al 2 O 3 catalyst, an indium oxide (In 2 O 3 )-based catalyst can double the methanol selectivity from 30–50 to 60–100%. It is worth noting that over catalysts involving various active metals dispersed on indium oxide (M/In 2 O 3 , M = Pd, Ni, Au, etc.), although the methanol yield is boosted, the selectivity remains similar to that of plain In 2 O 3 despite the distinct chemical properties of the added metals. Here, to investigate the phenomena behind this behavior, we used RuO 2 /In 2 O 3 as a test catalyst. The results of ambient pressure photoelectron spectroscopy, in situ X-ray absorption fine structure, and time-resolved X-ray diffraction indicate that the structure of the RuO 2 /In 2 O 3 catalyst is highly dynamic in the presence of a reactive environment. Specifically, under CO 2 hydrogenation conditions, Ru clusters facilitate the reduction of In 2 O 3 to generate In 2 O 3–x aggregates, which encapsulate the Ru systems in a migration driven by thermodynamics. In this way, the Ru O sites for CH 4 production are blocked while creating RuO x –In 2 O 3–x interfacial sites with tunable metal–oxide interactions for selective methanol production. In an inverse oxide/metal configuration, indium oxide has properties not seen in its bulk phase that are useful for the binding and conversion of CO 2 . This work reveals the dynamic nature of In 2 O 3 -based catalysts, providing insights for a rational design of materials for the selective synthesis of methanol.

36 MATERIALS SCIENCE↗

Global Characteristics of the IBEX Ribbon and Its Temporal Variation: Implications for Relationships with Solar Cycle Variability and the Interstellar Magnetic Field

The Interstellar Boundary Explorer (IBEX) has revealed the existence of the energetic neutral atom (ENA) ribbon, a narrow and nearly circular band of enhanced flux that enables probing plasma and magnetic field conditions outside the heliopause (HP). In this study, we investigate the global structure and temporal variation of the IBEX ribbon using 14 yr of IBEX-Hi ENA observations. We derive geometric parameters of the ribbon: center location, angular radius, eccentricity, and major axis orientation. We find that the ribbon exhibits systematic variations tied to the solar cycle. The ribbon center shows a solar cycle–modulated latitudinal motion at low energies. The angular radius increases with ENA energy and displays a pronounced enlargement between 2013 and 2018, coinciding with changes in high-latitude fast solar wind from polar coronal holes. The eccentricity remains consistently around 0.3 with some temporal evolution, while the major axis rotates gradually over time, becoming increasingly perpendicular to the ecliptic meridional plane. A notable hemispheric asymmetry has emerged over time: the ribbon in the northern hemisphere remains remarkably stable in position, whereas the southern ribbon exhibits temporal migration. By combining these results with solar wind observations, global heliosphere, and ribbon modeling, we suggest that this asymmetry is explained by a coupled effect of magnetic field draping and the latitude-dependent timing of fast solar wind from polar coronal holes. These results establish the most detailed long-term geometric characterization of the IBEX ribbon to date and provide observational support for models of secondary ENA production and magnetic field draping outside the HP.

Noh, Sung Jun [New Mexico Consortium, Los Alamos, ↗

A Pervasive Parallel Processing Framework for Data Visualization and Analysis at Extreme Scale

The evolution of the computing world from teraflop to petaflop has been relatively effortless, with several of the existing programming models scaling effectively to the petascale. The migration to exascale, however, poses considerable challenges. All industry trends infer that the exascale machine will be built using processors containing hundreds to thousands of cores per chip. It can be inferred that efficient concurrency on exascale machines requires a massive amount of concurrent threads, each performing many operations on a localized piece of data. Currently, visualization libraries and applications are based off what is known as the visualization pipeline. In the pipeline model, algorithms are encapsulated as filters with inputs and outputs. These filters are connected by setting the output of one component to the input of another. Parallelism in the visualization pipeline is achieved by replicating the pipeline for each processing thread. This works well for today’s distributed memory parallel computers but cannot be sustained when operating on processors with thousands of cores. Our project investigates a new visualization framework designed to exhibit the pervasive parallelism necessary for extreme scale machines. Our framework achieves this by defining algorithms in terms of worklets, which are localized stateless operations. Worklets are atomic operations that execute when invoked unlike filters, which execute when a pipeline request occurs. The worklet design allows execution on a massive amount of lightweight threads with minimal overhead. Only with such fine-grained parallelism can we hope to fill the billions of threads we expect will be necessary for efficient computation on an exascale machine.

97 MATHEMATICS AND COMPUTING↗

Breaking the Time Barrier in Kelvin Probe Force Microscopy: Fast Free Force Reconstruction Using the G-Mode Platform

The atomic force microscope (AFM) offers unparalleled insight into structure and material functionality across nanometer length scales. However, the spatial resolution afforded by the AFM tip is counterpoised by slow detection speeds compared to other common microscopy techniques (e.g. optical, scanning electron microscopy etc.). In this work, we develop an AFM imaging approach allowing ultrafast reconstruction of the tip-sample forces having ~2 orders of magnitude higher time resolution than standard detection methods. Fast free force recovery (F3R) overcomes the widely-viewed temporal bottleneck in AFM, i.e. the mechanical bandwidth of the cantilever, enabling time-resolved imaging at sub-bandwidth speeds. We demonstrate quantitative recovery of electrostatic forces with ~10 µs temporal resolution, free from cantilever ring-down effects. We further apply the F3R method to Kelvin probe force microscopy (KPFM) measurements. F3R-KPFM is an open loop imaging approach (i.e. no bias feedback), allowing ultrafast surface potential measurements (e.g. < 20 µs) to be performed at regular KPFM scan speeds. F3R-KPFM is demonstrated for exploration of ion migration in organometallic halide perovskites materials and shown to allow spatio-temporal imaging of positively charged ion migration under applied electric field, as well as subsequent formation of accumulated charges at the perovskite/electrode interface. In this work we demonstrate quantitative F3R-KPFM measurements – however, we fully expect the F3R approach to be valid for all modes of non-contact AFM operation, including non-invasive probing of ultrafast electrical and magnetic dynamics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Iodine Speciation Across the Length of the Hanford 200-UP-1 Operable Unit Radioiodine Plume and Biogeochemical Drivers of Speciation - 17270

In 1943, construction began on the first of nine nuclear reactors at the Hanford Site to produce plutonium for the development of atomic weapons for the Manhattan Project during World War II and throughout the Cold War. Over a production period lasting from 1944 to 1987, approximately 110,000 tons of nuclear fuel was processed. During the production period, billions of gallons of liquid nuclear waste and millions of tons of solid waste were produced. Approximately 4.7 Ci of radioiodine (I-129) was discharged to liquid disposal sites, during disposition of the waste. Following percolation of the liquid waste through the vadose zone, three large I-129 groundwater plumes have formed beneath Central Plateau Facilities including both 200 East and 200 West Areas. Analysis of I-129 plumes in the 200-ZP-1 Operable Unit (OU) (200 West Area) showed iodine speciation that was dominated by iodate even though iodide was thought to be dominant species in waste. Experimental results demonstrated that iodate interacts with calcite via a co-precipitation and/or adsorption mechanism. From sorption experiments performed on Hanford sediments, iodate interacted more strongly than iodide during adsorption experiments. These results would indicate that iodate migration would be retarded compared to iodide, but results from groundwater samples obtained from eight wells in the 200 ZP-1 OU did not support this hypothesis. Due to different chemical processes used during plutonium processing, iodine species in other plumes such as in the 200-UP-1 OU (200 West Area) may be different. In addition, species distribution may change longitudinally between the source area and the distal end of the plume. Groundwater samples will be taken at a location near the source, in the middle of the plume and at the distal end of the plume. These samples will be analyzed for iodine speciation using ion chromatography coupled to an inductively coupled plasma mass spectrometer. Results from the different samples will be compared to give an initial determination of species distribution at different locations along the plume. Data generated from these samples can then be used to inform the conceptual model that is being developed for iodine as part of an evaluation of remediation options for the 200-UP-1 OU. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗