Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Near surface defects: Cause of deficit between internal and external open-circuit voltage in solar cells

The presence of interface recombination in a complex multilayered thin-film solar structure causes a disparity between the internal open-circuit voltage (V OC,in ), measured by photoluminescence, and the external open-circuit voltage (V OC,ex ) i.e. an additional V OC deficit. Higher V OC,ex value aim require a comprehensive understanding of connection between V OC deficit and interface recombination. Here, a deep near-surface defect model at the absorber/buffer interface is developed for copper indium di-selenide solar cells grown under Cu excess conditions to explain the disparity between V OC ,in and V OC,ex . The model is based on experimental analysis of admittance spectroscopy and deep-level transient spectroscopy, which show the signature of deep acceptor defect. Further, temperature-dependent current-voltage measurements confirm the presence of near surface defects as the cause of interface recombination. The numerical simulations show strong decrease in the local V OC ,in near the absorber/buffer interface leading to a V OC deficit in the device. This loss mechanism leads to interface recombination without a reduced interface bandgap or Fermi level pinning. Further, these findings demonstrate that the V OC ,in measurements alone can be inconclusive and might conceal the information on interface recombination pathways, establishing the need for complementary techniques like temperature dependent current voltage measurements to identify the cause of interface recombination in the devices.

14 SOLAR ENERGY↗

Temperature effects on adsorption and capillarity water retention mechanisms in constrained unsaturated soils

Abstract This paper focuses on the impact of elevated temperatures on the adsorptive and capillarity water retention mechanisms of unsaturated soils under constrained (constant volume) conditions. This topic is critical for simulating the thermo-hydraulic behavior of soils in hydrogeological or geotechnical applications, including climate change effects on near surface soils, energy piles or soil borehole thermal energy storage systems in unsaturated soil layers, and buffers for geological nuclear waste repositories. A nonisothermal soil water retention curve (SWRC) that separately considers the temperature-dependency of the key parameters governing adsorptive and capillarity water retention mechanisms and soil physical parameters (e.g., surface tension, contact angle, adsorption capacity, cation exchange capacity, mean cavitation suction, air entry value and equilibrium film thickness) was developed to provide insights into the impact of temperature on water retention over the full suction range. The nonisothermal SWRC was validated using experimental data on high plasticity clays, with a good prediction of temperature effects on adsorption and capillarity water retention mechanisms in constrained unsaturated soils.

Lu, Yu↗

Superconducting epitaxial YBa 2 Cu 3 O 7-δ on SrTiO 3 buffered Si (001)

Thin films of optimally-doped (001)-oriented YBa 2 Cu 3 O 7-δ are epitaxially integrated on silicon (001) through growth on a single crystalline SrTiO 3 buffer. The former is grown using pulsed-laser deposition and the latter is grown on Si using oxide molecular beam epitaxy. The single crystal nature of the SrTiO 3 buffer enables high quality YBa 2 Cu 3 O 7-δ films exhibiting high transition temperatures to be integrated on Si. For a 30 nm thick SrTiO 3 buffer, 50 nm thick YBa 2 Cu 3 O 7-δ films that exhibit a transition temperature of ~ 93 K, and a narrow transition width (< 5 K) are achieved. Furthermore, the integration of single crystalline YBa 2 Cu 3 O 7-δ on Si (001) paves the way for the potential exploration of cuprate materials in a variety of applications.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Distributed fibre optic strain sensing of an axially deformed well model in the laboratory

Well integrity is crucial in enabling sustainable gas production from methane hydrate reservoirs and real-time distributed monitoring techniques can potentially facilitate proper and timely inspection of well integrity during gas production. Here in this research, the feasibility of distributed fibre optic strain monitoring with Brillouin optical time domain reflectometry/analysis (BOTDR/A) for well monitoring was examined by conducting a laboratory test on a well model subjected to axial tensile deformation, which occurs due to reservoir compaction during gas production. First, the validity of the proposed experimental methodology is assessed by a finite element analysis and theoretical modelling of a well subjected to reservoir compaction. A 3 m long well model is developed from the modelling and is instrumented with different types of fibre optic cables to measure the distributed strain development during tensile loading. Results show that the proposed well model and loading scheme can satisfactorily simulate the axial tensile deformation of the well in the laboratory condition. BOTDR is capable of capturing the tensile strain development of the well model accurately within the limitation of the spatial resolution of the BOTDR measurement. To enable accurate distributed strain monitoring of well deformation with BOTDR/A, the following issues are discussed: tightly buffered coating layers around optical fibre cores through mechanical compression and/or chemical adhesion, and a small number of coating layers.

42 ENGINEERING↗

Effect of epitaxial strain on the magneto-electric coupling of YMnO{sub 3} thin films

We report synthesis of phase pure multiferroic YMnO{sub 3} thin films on sapphire (0001) with conducting ZnGaO buffer contact layer. Films were prepared by using pulsed laser deposition technique and characterized using x-ray diffraction, scanning electron microscopy, energy dispersive absorption spectroscopy, and magnetic field dependent dielectric measurement techniques. Structural characterizations indicated phase purity and epitaxial nature of the films. The dielectric response indicated an anomaly in dielectric constant epsilon and tan delta in the vicinity of 30 K, well below the bulk Neel temperature approx70 K. This anomaly in epsilon and tan delta and its magnetic field dependence is explained as an influence of strain due to lattice mismatch between the substrate and YMnO{sub 3} film. A substantial enhancement in magnetocapacitance was also observed for magnetic field applied parallel to ab plane of the film. Our results show that it is possible to tune the multiferroic property of YMnO{sub 3} via changes in ferroelastic route.

36 MATERIALS SCIENCE↗

Much simplified ion-beam assisted deposition-TiN template for high-performance coated conductors

A much simplified template, i.e., two nonsuperconducting layers between the superconducting YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) and the polycrystalline metal substrate, has been developed for high-performance coated conductors by using biaxially aligned TiN as a seed layer. A combination of a thin TiN ({approx}10 nm by ion-beam assisted deposition) layer and an epitaxial buffer LaMnO{sub 3} layer ({approx}120 nm) allows us to grow epitaxial YBCO films with values of full width at half-maximum around 3.5 deg. and 1.7 deg. for the {phi}-scan of (103) and rocking curve of (005) YBCO, respectively. The YBCO films grown on electropolished polycrystalline Hastelloy using this two-layer template exhibited a superconducting transition temperature of 89.5 K, a critical current density of 1.2 MA/cm{sup 2} at 75.5 K, and an {alpha} value (proportional factor of critical current density J{sub c}{approx}H{sup -}{alpha}) of around 0.33, indicating a high density of pinning centers and an absence of weak links.

36 MATERIALS SCIENCE↗

Analysis of light propagation for a crossing of thin silicon wires using vertical tunnelling coupling with a thick optical channel waveguide

Using silicon photonic wires in a silicon-on-insulator structure as an example, we examine the problem of crossings of thin, high-index-contrast channel waveguides. To ensure high optical wave transmission efficiency at as low a level of parasitic scattering as possible, we propose using a structure with vertical coupling between a thin tapered silicon waveguide and a thick polymer waveguide, separated by a thin buffer oxide layer. Numerical simulation is used to find conditions under which such a structure (3 × 90 μm in dimensions) ensures 98 % and 99 % transmission efficiency at ∼1.55 μm in 35- and 26-nm spectral ranges, respectively, for direct propagation and 99.99 % transmission in the transverse direction. The optical element in question is proposed for use in optical microchips with multiple channel waveguide crossings. (integrated optical waveguides)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Combinatorial Study of MZO Emitters for CdTe-Based Solar Cells

Precise band alignment at the front interface of CdTe-based solar cells is necessary to reduce photoexcited charge carrier recombination and to enable higher energy conversion efficiencies. Magnesium zinc oxide is not only transparent but also offers the ability to tune the conduction band offset with CdTe at the front of the device stack. In this work, we describe reactive sputtering of Mg 1-x Zn x O using metal targets and its application in CdTe photovoltaics. Combinatorial libraries of Mg 1-x Zn x O were created to tune the conduction band alignment for the optimal performance of CdTe solar cells. Band gap variation of more than 0.4 eV is achieved across a 3-inch substrate. Kelvin probe measurements demonstrate variance of work function across the substrate. Device performance is optimized at band gaps of 3.5 eV for the CdTe device processing conditions employed in this study.

14 SOLAR ENERGY↗

Enforcing End-to-end I/O Policies for Scientific Workflows using Software-Defined Storage Resource Enclaves

Data-intensive knowledge discovery requires scientific applications to run concurrently with analytics and visualization codes executing in situ for timely output inspection and knowledge extraction. Consequently, I/O pipelines of scientific workflows can be long and complex because they comprise many stages of analytics across different layers of the I/O stack of high-performance computing systems. Performance limitations at any I/O layer or stage can cause an I/O bottleneck resulting in greater than expected end-to-end I/O latency. In this paper, we present the design and implementation of a novel data management infrastructure called Software-Defined Storage Resource Enclaves (SIREN) at system level to enforce end-to-end policies that dictate an I/O pipeline's performance. SIREN provides an I/O performance interface for users to specify the desired storage resources in the context of in-situ analytics. If suboptimal performance of analytics is caused by an I/O bottleneck when data are transferred between simulations and analytics, schedulers in different layers of the I/O stack automatically provide the guaranteed lower bounds on I/O throughput. Lastly, our experimental results demonstrate that SIREN provides performance isolation among scientific workflows sharing multiple storage servers across two I/O layers (burst buffer and parallel file systems) while maintaining high system scalability and resource utilization.

97 MATHEMATICS AND COMPUTING↗

Comparative I/O workload characterization of two leadership class storage clusters. In: PDSW '15 Proceedings of the 10th Parallel Data Storage Workshop

The Oak Ridge Leadership Computing Facility (OLCF) is a leader in large-scale parallel file system development, design, deployment and continuous operation. For the last decade, the OLCF has designed and deployed two large center-wide parallel file systems. The first instantiation, Spider 1, served the Jaguar supercomputer and its predecessor, Spider 2, now serves the Titan supercomputer, among many other OLCF computational resources. The OLCF has been rigorously collecting file and storage system statistics from these Spider systems since their transition to production state. In this paper we present the collected I/O workload statistics from the Spider 2 system and compare it to the Spider 1 data. Our analysis show that the Spider 2 workload is more more write-heavy I/O compared to Spider 1 (75% vs. 60%, respectively). The data also show the OLCF storage policies such as periodic purges are effectively managing the capacity resource of Spider 2. Furthermore, due to improvements in tdm_multipath and ib_srp software, we are utilizing the Spider 2 system bandwidth and latency resources more effectively. The Spider 2 bandwidth usage statistics shows that our system is working within the design specifications. However, it is also evident that our scientific applications can be more effectively served by a burst buffer storage layer. All the data has been collected by monitoring tools developed for the Spider ecosystem. We believe the observed data set and insights will help us better design the next-generation Spider file and storage system. It will also be helpful to the larger community for building more effective large-scale file and storage systems.

Gunasekaran, Raghul↗

Local, global, and nonlinear screening in twisted double-layer graphene

Significance Using scanning tunneling microscopy and numerical simulations we demonstrate that a graphene buffer sheet placed underneath an atomically thin layer is an extremely effective method to increase the quality of 2D electron systems without modifying their electronic structure and without compromising the gating capabilities. We show that owing to its remarkable nonlinear screening capability the graphene buffer layer provides better shielding from substrate-induced perturbations than either increasing the distance to the substrate or doubling the carrier density, or even than using a graphene bilayer.

36 MATERIALS SCIENCE↗

Co-optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells: SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin-film solar cells consisting of earth-abundant and non-toxic materials were created from pulsed chemical vapor deposition (pulsed-CVD) of SnS as the p-type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n-type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were investigated for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post-deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved.

14 SOLAR ENERGY↗

Incorporation of La in epitaxial SrTiO{sub 3} thin films grown by atomic layer deposition on SrTiO{sub 3}-buffered Si (001) substrates

Strontium titanate, SrTiO{sub 3} (STO), thin films incorporated with lanthanum are grown on Si (001) substrates at a thickness range of 5–25 nm. Atomic layer deposition (ALD) is used to grow the La{sub x}Sr{sub 1−x}TiO{sub 3} (La:STO) films after buffering the Si (001) substrate with four-unit-cells of STO deposited by molecular beam epitaxy. The crystalline structure and orientation of the La:STO films are confirmed via reflection high-energy electron diffraction, X-ray diffraction, and cross-sectional transmission electron microscopy. The low temperature ALD growth (∼225 °C) and post-deposition annealing at 550 °C for 5 min maintains an abrupt interface between Si (001) and the crystalline oxide. Higher annealing temperatures (650 °C) show more complete La activation with film resistivities of ∼2.0 × 10{sup −2} Ω cm for 20-nm-thick La:STO (x ∼ 0.15); however, the STO-Si interface is slightly degraded due to the increased annealing temperature. To demonstrate the selective incorporation of lanthanum by ALD, a layered heterostructure is grown with an undoped STO layer sandwiched between two conductive La:STO layers. Based on this work, an epitaxial oxide stack centered on La:STO and BaTiO{sub 3} integrated with Si is envisioned as a material candidate for a ferroelectric field-effect transistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation in multilayer III–N structures on Si(111) substrates

X-ray diffractometry and X-ray scattering reciprocal space maps have been used to study strain relaxation in a complex buffer composed of seven intermediate layers of Al{sub x}Ga{sub 1−x}N composition with different values of x, decreasing with an increase in the distance from the substrate. The layers have been grown by hydride metalorganic vapor phase epitaxy on silicon and sapphire substrates. Differences in the structural quality of the first four layers of a multilayer buffer grown on different substrates have been revealed. A gradual smoothing out of these differences in the next three layers with an increase in the layer serial number has been shown. The last grown intermediate Al{sub x}Ga{sub 1−x}N layer and the GaN layer grown on it have identical thicknesses and degrees of mosaicity, regardless of the substrate type. Device structures grown on a complex buffer demonstrate emission in approximately the same wavelength range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗