Search NASA⌕ Search

SEARCH · Search NASA

Results for “data guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Flexural Fatigue Testing and Qualification of Hybrid PAN-pitch Composite Materials with High Through-Thickness Thermal Conductivity

Carbon-fiber-reinforced polymers (CFRPs) considered for motor components within future electric vertical takeoff and landing (eVTOL) vehicles require not only a high strength-to-weight ratio but also a high through-thickness thermal conductivity (TC) to dissipate heat. Previously, CFRPs incorporating pitch CF interleaves demonstrated an increased through-thickness TC relative to the baseline composite, but the effect on flexural fatigue life was not evaluated. For this work, T700S/TC275–1 braided carbon fiber/epoxy prepreg baseline (no interleave), YSH–60A pitch interleave, and YS–80A pitch interleave configurations were tested for fatigue life. A combination of ASTM International Standards D7264 and D3479 were used to develop a reliable testing method. An Instron® (Illinois Tool Works Inc.) 8501 servohydraulic system with a fatigue test fixture was set up with a 16:1 span:thickness ratio, load ratio R set to 0.1, and frequency of 4 Hz. High-cycle fatigue testing was completed, and it was found that YSH–60A interleave performed slightly better than YS–80A below 100,000 cycles but showed no differences above 100,000 cycles. In all cases, the baseline CFRP had superior fatigue life performance both in terms of stress handled and total cycles to failure. These fatigue testing data will inform future use of hybrid CFRP materials by highlighting the tradeoff between increased through-thickness TC and fatigue life. Testing guidelines, equipment, and parameters for static and fatigue tests were successfully outlined for CFRPs.

composites↗

Physics and Analysis at a Hadron Collider - An Introduction (1/3)

This is the first lecture of three which together discuss the physics of hadron colliders with an emphasis on experimental techniques used for data analysis. This first lecture provides a brief introduction to hadron collider physics and collider detector experiments as well as offers some analysis guidelines. The lectures are aimed at graduate students.

BEAM LINE↗

Correlating processing variables to material properties in recycled polypropylene: A data‐driven approach

Abstract Polypropylene (PP) is one of the most widely used plastics, yet its recycling remains limited, with less than 1% of solid waste PP being reprocessed. Mechanical recycling through extrusion is the most practical method, but inconsistent reprocessing conditions introduce variability in material properties. While temperature, screw speed, and residence time influence the thermomechanical stress applied during reprocessing, there are no standardized guidelines for optimizing these parameters. This study examines how these factors shape the properties of recycled PP, using conditions designed to mimic post‐industrial recycled (PIR) scrap. Residence time was measured using colorimetric tracking and correlated with molecular weight, viscosity, and mechanical properties over multiple extrusion cycles. Data‐driven modeling, including response surface methodology, support vector machines, and artificial neural networks, identified processing temperature as the dominant factor in material degradation, followed by residence time. Mechanical properties remained stable, while viscosity decreased predictably with increasing residence time. By linking reprocessing conditions to property evolution, this study provides a method to optimize processing parameters and reduce variability in recycled PP. These findings help manufacturers improve process control, making recycled PP more predictable for reuse in manufacturing. Highlights Study of PIR‐quality PP without additives or compatibilizers. Residence time analysis shows processing temperature drives PP property changes. Mark‐Houwink enables quick molecular weight checks for quality control. Models predict mechanical and rheological shifts in reprocessing. Optimized processing parameters minimize property degradation in recycling.

Estela‐García, John E. [Polymer Engineering Center↗

Risk-Based Information to Support the Evaluation of Management Options for Cesium and Strontium Capsules at the Hanford Site

Evaluations are under way to support U.S. Department of Energy decisions on how to manage cesium and strontium capsules currently in storage at the Hanford site. Health-based exposure limits for drinking water, oral toxicity data, and environmental fate information were combined in an initial evaluation to frame performance targets for managing chemicals and radionuclides that could leach from the capsules and migrate to groundwater over time. More than 50 relevant benchmarks were identified for 15 of the 17 contaminants in the study set. Of those multiple benchmarks, EPA limits for drinking water served as the main basis for the leachate performance targets. For the remaining two contaminants, stable cesium and zirconium, preliminary indicators were derived from a limited review of toxicity data. Thus, preliminary candidate concentrations were identified for the full study set to support the ongoing evaluation of capsule management options. In summary: In an earlier scoping study, three radionuclides and eight chemicals were identified as contaminants of interest for leachate from cesium and strontium capsules stored at the Hanford site. To frame management options for these capsules, it is assumed that contaminants will leach to groundwater and serve as a drinking water source in the long-term future. Before developing performance targets for the initial set of contaminants, a combined fate and toxicity evaluation was conducted to determine if any others should be added to account for decay or fate products and chemical toxicity. From this review, the list was expanded to produce a final study set of 17 contaminants. Established exposure limits and toxicity data were then reviewed and integrated to develop candidate health-based concentrations to frame performance targets for assessing options for long-term capsule management. This review of more than a dozen different benchmarks and toxicity sources translated to hundreds of individual data checks to support the identification of these target concentrations. In most cases, an EPA drinking water standard served as the key basis for the suggested target. Exceptions were warranted when the drinking water standard reflects dated information and more recent studies suggest a different concentration. Thus, for contaminants with older limits (such as Sr-90), the drinking water standard is identified and an alternate value is also provided that reflects more recent scientific knowledge. Although multiple limits or guidelines exist for most study chemicals, no benchmarks were found for stable cesium or zirconium. Thus, the preliminary target concentrations for these two metals were based on an initial limited review of toxicity data from the scientific literature. In conclusion, fate and toxicity information can be effectively integrated to develop target concentrations for managing contaminated materials at cleanup sites. These targets are simply intended to serve as guides, not as part of a formal compliance review process. For this reason, to the extent possible, it is useful to incorporate current health-based information relevant to the given application. For the Hanford application, it is expected that the preliminary targets will be refined to reflect evolving knowledge. That knowledge may extend from additional characterization of the capsules and their disposition options, and further context for setting-related conditions, to the refinement of benchmarks and underlying models, and further toxicity assessments. The overall goal is to support technical risk analyses for Hanford with current scientific knowledge and practice, to assure health protection into the long term. (authors)

54 ENVIRONMENTAL SCIENCES↗

Logistics Rates and Assumptions for Future Human Spaceflight Missions Beyond LEO

As NASA prepares for future human spaceflight missions with extended crew duration in destinations beyond low Earth orbit (LEO), the Agency has focused itself on understanding the drivers to sustainably support human life beyond Earth’s atmosphere. Future missions to deep space, the lunar surface, and eventually the Martian surface pose new challenges in ensuring the crew is sufficiently supplied with all necessary materials. To mitigate the risk of not delivering sufficient consumables and logistics for human spaceflight missions, NASA has examined past human space mission data and developed metabolic modeling to determine estimates for the crew consumption rates of fluids, solid consumables, and additional equipment needed. This paper is a compilation of guidelines, rates, and assumptions necessary to evaluate the logistics needs for future human exploration conceptual missions beyond LEO, providing a starting point and resource of information regarding usage rates and overall logistics supply planning for crewed exploration missions. Logistics represent all equipment and supplies not installed as part of the vehicle that are needed to support mission activities. Logistics can be further divided into specific categories, including consumables, maintenance items, spares, utilization, outfitting, as well as any packaging required. This paper will also provide use case examples of logistics needs to support human missions in deep space, including a conceptual lunar surface mission. The paper provides information necessary to calculate the mass and volume of known logistics for conceptual future human exploration missions beyond LEO. The assumptions in the paper are updated versions of previous assumptions made by the Agency and were derived from a number of sources, including International Space Station (ISS) historical usage and resupply rates, the Life Support Baseline Values and Assumptions Document (BVAD) 2022, Human Integration Design Handbook (HIDH) 2014, and data gathered from NASA human spaceflight programs and projects. The primary goal of the paper is to establish a set of consistent reference rates that multiple teams and groups can utilize to conduct logistics analysis and compare cases. This methodology is for initial estimates of conceptual human missions and does not take the place of detailed analysis for programs, nor does it provide requirements for programs.

Human Spaceflight↗

Logistics Rates and Assumptions for Future Human Spaceflight Missions Beyond LEO

As NASA prepares for future human spaceflight missions with extended crew duration in destinations beyond low Earth orbit (LEO), the Agency has focused itself on understanding the drivers to sustainably support human life beyond Earth’s atmosphere. Future missions to deep space, the lunar surface, and eventually the Martian surface pose new challenges in ensuring the crew is sufficiently supplied with all necessary materials. To mitigate the risk of not delivering sufficient consumables and logistics for human spaceflight missions, NASA has examined past human space mission data and developed metabolic modeling to determine estimates for the crew consumption rates of fluids, solid consumables, and additional equipment needed. This paper is a compilation of guidelines, rates, and assumptions necessary to evaluate the logistics needs for future human exploration conceptual missions beyond LEO, providing a starting point and resource of information regarding usage rates and overall logistics supply planning for crewed exploration missions. Logistics represent all equipment and supplies not installed as part of the vehicle that are needed to support mission activities. Logistics can be further divided into specific categories, including consumables, maintenance items, spares, utilization, outfitting, as well as any packaging required. This paper will also provide use case examples of logistics needs to support human missions in deep space, including a conceptual lunar surface mission. The paper provides information necessary to calculate the mass and volume of known logistics for conceptual future human exploration missions beyond LEO. The assumptions in the paper are updated versions of previous assumptions made by the Agency and were derived from a number of sources, including International Space Station (ISS) historical usage and resupply rates, the Life Support Baseline Values and Assumptions Document (BVAD) 2022, Human Integration Design Handbook (HIDH) 2014, and data gathered from NASA human spaceflight programs and projects. The primary goal of the paper is to establish a set of consistent reference rates that multiple teams and groups can utilize to conduct logistics analysis and compare cases. This methodology is for initial estimates of conceptual human missions and does not take the place of detailed analysis for programs, nor does it provide requirements for programs.

Human Spaceflight↗

Alternative High-Performance Motors with Non-Rare Earth Materials, Final Publishable Report

Electric drive systems, which include electric machines and power electronics, are a key enabling technology for advanced vehicle propulsion systems that reduce the petroleum dependence of the transportation sector. To have significant effect, electric drive technologies must be economical in terms of cost, weight, and size while meeting performance and reliability expectations. The goal of the project is to develop traction motors that reduce or eliminate the use of rare-earth materials and meet the DoE specifications for such a traction motor. This is accomplished by evaluating and developing multiple motor topologies in conjunction with advanced materials. Eight non-permanent magnet motor topologies and two reduced or non-rare earth motor topologies are analyzed and compared using a common set of requirements. Five of the motors are built and tested to validate the analysis. This paper provides a detailed quantitative comparison of the different machine topologies that reduce or eliminate rare-earth materials. Conclusions are drawn from the analysis and test data to show the tradeoffs related to selecting each of the motor topologies with the hope of providing practicing engineers and researchers in the field enough guidelines for choosing the “optimum” machine topology that suits their applications and set of performance requirements. Four materials technologies were investigated for their ability to enable a reduced rare earth electric motor. Two of the technologies were soft magnetic materials, one was a non-rare-earth containing permanent magnet technology, and the last was an insulation material. These processing and performance of these materials were first demonstrated in small coupons. The coupon tests justified proceeding to larger scale processing for two of the materials technologies: 1) a dual-phase soft magnetic material for use in rotor laminates and 2) a high temperature insulation material for use as a slot liner in the stator. The dual phase soft magnetic material was produced at a scale sufficient to build and test a sub-scale motor prototype. The high temperature insulation material was first evaluated in a series of “statorettes” before being demonstrated in the stator of one of the full-scale motor prototypes. Testing of the dual phase material revealed issues with process variability in larger production volumes that are being addressed in a subsequent project. The performance of the high-temperature slot liner insulation was demonstrated during the operation of a full-scale prototype. Furthermore, the insulation material was shown to survive aging tests of 2000 hours and 280 °C and 800 hours at 300 °C. This program provides analysis and data to accelerate the introduction of hybrid electric vehicles into the U.S. road vehicle fleet and bring the added benefits of reduced fuel consumption and environmental impacts

33 ADVANCED PROPULSION SYSTEMS↗

NASA Electronic Parts and Packaging (NEPP) Field Programmable Gate Array (FPGA) Single Event Effects (SEE) Test Guideline Update

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

Test guidelines↗

NASA Electronic Parts and Packaging Field Programmable Gate Array Single Event Effects Test Guideline Update

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

Field Programmable Gate Array (FPGA)↗

Visualization and Decision Making Design Under Uncertainty

Uncertainty is an important aspect to data understanding. Without awareness of the variability, error, or reliability of a dataset, the ability to make decisions on that data is limited. However, practices around uncertainty visualization remain domain-specific, rooted in convention, and in many instances, absent entirely. Part of the reason for this may be a lack of established guidelines for navigating difficult choices of when uncertainty should be added, how to visualize uncertainty, and how to evaluate its effectiveness. Unsurprisingly, the inclusion of uncertainty into visualizations is a major challenge to visualization. As work concerned with uncertainty visualization grows, it has become clear that simple visual additions of uncertainty information to traditional visualization methods do not appropriately convey the meaning of the uncertainty, pose many perceptual challenges, and, in the worst case, can lead a viewer to a completely wrong understanding of the data. These challenges are the driving motivator for this special issue.

data models↗

Global Geologic Map of Europa

Europa, with its indications of a sub-ice ocean, is of keen interest to astrobiology and planetary geology. Knowledge of the global distribution and timing of Europan geologic units is a key step for the synthesis of data from the Galileo mission, and for the planning of future missions to the satellite. The first geologic map of Europa was produced at a hemisphere scale with low resolution Voyager data. Following the acquisition of higher resolution data by the Galileo mission, researchers have identified surface units and determined sequences of events in relatively small areas of Europa through geologic mapping using images at various resolutions acquired by Galileo's Solid State Imaging camera. These works provided a local to subregional perspective and employed different criteria for the determination and naming of units. Unified guidelines for the identification, mapping and naming of Europan geologic units were put forth by and employed in regional-to-hemispheric scale mapping which is now being expanded into a global geologic map. A global photomosaic of Galileo and Voyager data was used as a basemap for mapping in ArcGIS, following suggested methodology of all-stratigraphy for planetary mapping. The following units have been defined in global mapping and are listed in stratigraphic order from oldest to youngest: ridged plains material, Argadnel Regio unit, dark plains material, lineaments, disrupted plains material, lenticulated plains material and Chaos material.

Doggett, T.↗

A two-dimensional analytical unit cell model for redox flow battery evaluation and optimization

Cell performance optimization is important for improving the overall system efficiency of a redox flow battery. To gain better insights into key controlling factors of system efficiency, this work first proposed a theoretical model for a unit flow battery cell by extending a two-dimensional analytic model to a full battery cell. Such a model is then used for cell performance optimization after validating it with experimental and numerical modeling data. With the model results, the activation, equilibrium, and pump energy losses are identified as the dominant sources of battery energy losses. Further, a guideline for reducing these sources is also proposed. Following the guideline, the mass transport coefficient is shown as a key control factor of the equilibrium energy loss and Coulombic efficiency (CE). Approaches are then proposed to improve CE and the overall system efficiency. The mass transport is also revealed as the mechanism of pump rate optimization where an optimal pump rate significantly reduces the equilibrium energy loss. With both low equilibrium and pump energy losses, an optimal electrode porosity or specific area design can further improve a battery's system efficiency based on an optimal porosity predicted by the present model. The model also demonstrates distinct behaviors and overestimation in the system efficiency when reduced to a zero-dimensional model with neglected mass transport resistance. With the new model, the guideline, and new insights, this work provides a reliable and efficient tool for the evaluation and optimization of redox flow battery design in practical applications.

25 ENERGY STORAGE↗

Order/Disorder and in Situ Oxide Defect Control in the Bixbyite Phase YPrO 3+δ (0 ≤ δ < 0.5)

The YPrO 3+δ system is a nearly ideal model system for the investigation of oxide defect creation and annihilation in oxide ion conductor related phases with potential applications as solid state electrolytes in solid oxide fuel cells. The formation, structure, high temperature reactivity, and magnetic susceptibility of phase pure YPrO 3+δ (0 ≤ δ ≤ 0.46) are reported. The topotactic reduction and oxidation of the YPrO 3+δ system was investigated by powder X-ray in situ diffraction experiments and revealed bixbyite structures (space group: $Ia\bar{3}$) throughout the series. Combined neutron and X-ray data clearly show oxygen uptake and removal. The research provides a detailed picture of the Y 3+ /Pr 3+ /Pr 4+ sublattice evolution in response to the redox chemistry. Upon oxidation, cation site splitting is observed where the cation in the (1/4, 1/4, 1/4) position migrates along the body diagonal to the (x, x, x) position. Any oxygen in excess of YPrO 3.0 is located in the additional 16c site without depopulating the original 48e site. The in situ X-ray diffraction data and thermal gravimetric analysis have revealed the reversible topotactic redox reactivity at low temperatures (below 425 °C) for all compositions from YPrO 3 to YPrO 3.46 . Magnetic susceptibility studies were utilized in order to further confirm praseodymium oxidation states. The linear relation between the cubic unit cell parameter and oxygen content allows for the straightforward determination of oxygen stoichiometry from X-ray diffraction data. Here, the different synthesis strategies reported here are rationalized with the structural details and the reactivity of YPrO 3+δ phases and provide guidelines for the targeted synthesis of these functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calibration support for the Earth Observing System Project

The Earth Observing System Project (EOS) program guidelines establishes significantly more stringent requirements on calibrations of instruments. This requirement is driven by the need for long-term continuity of acquired data sets and the use of measurements in interdisciplinary investigations. Personnel from the Standards and Calibration Office have been supporting the Program and Project in interpreting these goals into specific requirements. Contributions to EOS have included participation in the Panel of Experts which produced a list of consensus items necessary for accomplishing an accurate calibration and suggested EOS Project Calibration Policy, and drafting the announcement of opportunity and bidders information package positions on instrument calibration and data product validation. Technical staffing was provided to the NASA delegates to the Committee on Earth Orbiting Satellites (club of space-faring nations) for the standing working group on Calibration and Data Validation.

Guenther, B. W.↗

FloodPlanet: High-Resolution Commercial Imagery for Training and Validation of Deep Learning-Based Models of Inundation Extent

Flooding events are becoming increasingly frequent worldwide and are known to cause extensive damage. Public optical and radar satellite imagery can be used to detect large areas of inundation in rural areas, however, long revisit times and coarse spatial resolution limit applications for short-lived events and urban areas. Commercial constellations such as those operated by Planet offer increased spatial and temporal resolution and can supplement mapping efforts to provide more information to disaster response, relief, and mitigation efforts. Deep learning requires high quality labeled data for training across coincident sensors. The FloodPlanet dataset presented here contains labeled surface water for 18 events across the world based on Planetscope imagery with coincident Harmonized Landsat Sentinel-2 ( HLS) or Sentinel-1 and builds upon the previously existing Sen1Floods11, xBD, and NASA Sentinel-1 datasets. Sen1Floods11 includes 4,831 512x512 pixel overlapping tiles of coincident Sentinel-1 and Sentinel-2 data observing 11 flood events across the world from 2017-2019. The dataset contains a combination of automated and hand-labeled surface water for use in training and validation of inundation modeling efforts. The xBD dataset identifies flood-damaged buildings and indicates the scale of damage to each (none, minor, moderate, and major) from four flood events which occurred in the United States, India, Nepal, and Bangladesh from the same time period. The NASA dataset contains hand-labeled water bodies observed in Sentinel-1 imagery during five flood events within the 2017-2019 period. The effort presented here utilizes observations from these previously investigated flood events to generate labels of surface water at the 3-5m spatial resolution provided by Planetscope and facilitate the comparison between public and commercial data. A data pipeline was built which uses clustering algorithms to pick the most suitable overlapping chips between the public data and PlanetScope data for manual labeling. Labels were created manually using NASA’s ImageLabeler tool and include areas of high- and low-confidence water. The high confidence designation is reserved for areas of open, unobstructed water while low confidence is used for areas of suspected water beneath vegetation, clouds, or cloud shadows. Expected to be released in late 2022, the FloodPlanet dataset will include tiled imagery with a unique ID for each 1024x1024 pixel tile, 7 bands of HLS data, and high- and low-confidence flood labels in both shapefile and tiff formats. The authors will follow Spatial Temporal Access Catalog (STAC) guidelines to release FloodPlanet on the Radiant Earth ML hub, which hosts public datasets for machine learning.

Alexander Melancon↗

Towards an improved understanding of the Antarctic coastal zone and its contribution to future global sea level

Understanding the coastal zone of the Antarctic Ice Sheet, where it interacts with the Southern Ocean and warmer air masses, is crucial for predicting Antarctica's influence on the global climate. This region has multiple tipping mechanisms that could trigger large, rapid, and potentially irreversible changes in the coming centuries. The Antarctic Ice Sheet remains the largest source of uncertainty in future sea-level projections. Insufficient knowledge of bed topography beneath the ice shelves and the coastal ice sheet is not yet well documented, but is a major source of this uncertainty. This review assesses current knowledge of the coastal zone and highlights methods to investigate it, including aerogeophysical surveys, ground- and ship-based measurements, satellite observations, and computer modeling. An ensemble analysis of published bed topography datasets identifies significant data gaps and their regional distribution, framed in the context of current ice-sheet behavior and potential instability. We propose scientific priorities and guidelines for future aerogeophysical surveys, advocating for a comprehensive, coordinated international effort to build a next-generation dataset of Antarctic bed properties. Such an initiative would significantly advance understanding of the role of coastal processes in ice-sheet dynamics, reducing uncertainties in sea-level rise projections and enhancing predictions of future ocean and climate changes.

Kenichi Matsuoka↗

Pelvic Normal Tissue Contouring Guidelines for Radiation Therapy: A Radiation Therapy Oncology Group Consensus Panel Atlas

Purpose: To define a male and female pelvic normal tissue contouring atlas for Radiation Therapy Oncology Group (RTOG) trials. Methods and Materials: One male pelvis computed tomography (CT) data set and one female pelvis CT data set were shared via the Image-Guided Therapy QA Center. A total of 16 radiation oncologists participated. The following organs at risk were contoured in both CT sets: anus, anorectum, rectum (gastrointestinal and genitourinary definitions), bowel NOS (not otherwise specified), small bowel, large bowel, and proximal femurs. The following were contoured in the male set only: bladder, prostate, seminal vesicles, and penile bulb. The following were contoured in the female set only: uterus, cervix, and ovaries. A computer program used the binomial distribution to generate 95% group consensus contours. These contours and definitions were then reviewed by the group and modified. Results: The panel achieved consensus definitions for pelvic normal tissue contouring in RTOG trials with these standardized names: Rectum, AnoRectum, SmallBowel, Colon, BowelBag, Bladder, UteroCervix, Adnexa{sub R}, Adnexa{sub L}, Prostate, SeminalVesc, PenileBulb, Femur{sub R}, and Femur{sub L}. Two additional normal structures whose purpose is to serve as targets in anal and rectal cancer were defined: AnoRectumSig and Mesorectum. Detailed target volume contouring guidelines and images are discussed. Conclusions: Consensus guidelines for pelvic normal tissue contouring were reached and are available as a CT image atlas on the RTOG Web site. This will allow uniformity in defining normal tissues for clinical trials delivering pelvic radiation and will facilitate future normal tissue complication research.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mid-frequency Band Dynamics of Large Space Structures

High and low intensity dynamic environments experienced by a spacecraft during launch and on-orbit operations, respectively, induce structural loads and motions, which are difficult to reliably predict. Structural dynamics in low- and mid-frequency bands are sensitive to component interface uncertainty and non-linearity as evidenced in laboratory testing and flight operations. Analytical tools for prediction of linear system response are not necessarily adequate for reliable prediction of mid-frequency band dynamics and analysis of measured laboratory and flight data. A new MATLAB toolbox, designed to address the key challenges of mid-frequency band dynamics, is introduced in this paper. Finite-element models of major subassemblies are defined following rational frequency-wavelength guidelines. For computational efficiency, these subassemblies are described as linear, component mode models. The complete structural system model is composed of component mode subassemblies and linear or non-linear joint descriptions. Computation and display of structural dynamic responses are accomplished employing well-established, stable numerical methods, modern signal processing procedures and descriptive graphical tools. Parametric sensitivity and Monte-Carlo based system identification tools are used to reconcile models with experimental data and investigate the effects of uncertainties. Models and dynamic responses are exported for employment in applications, such as detailed structural integrity and mechanical-optical-control performance analyses.

dynamics↗