Search NASA⌕ Search

SEARCH · Search NASA

Results for “docking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Automatic spacecraft detumbling by internal mass motion

In the operation of future manned space vehicles, there will always be a finite probability that an accident will occur which results in uncontrolled tumbling of a craft. Hard docking by a manned rescue vehicle is not acceptable because of the hazardous environment to which rescue crewmen would be exposed and excessive maneuvering accelerations during docking operations. A movable-mass control concept, which is activated upon initiation of tumbling and is autonomous, can convert tumbling motion into simple spin. The complete equations of motion for an asymmetric rigid spacecraft containing a movable mass are presented, and appropriate control law and system parameters are selected to minimize kinetic energy, resulting in simple spin about the major principal axis. Simulations indicate that for a large space station experiencing a collision, which results in tumbling, a 1% movable mass is capable of stabilizing motion in 2 hr.

Edwards, T. L.↗

Apollo Soyuz test project, USA-USSR

The mission plan of the docking of a United States Apollo and a Soviet Union Soyuz spacecraft in Earth orbit to test compatible rendezvous and docking equipment and procedures is presented. Space experiments conducted jointly by the astronauts and cosmonauts during the joint phase of the mission as well as experiments performed solely by the U.S. astronauts and spread over the nine day span of the flight are included. Biographies of the astronauts and cosmonauts are given.

Source record↗

Mutual assistance in space

Operating principles, system functions, and technological problems associated with developing compatible spacecraft, station approach, and docking facilities between the U.S. and the U.S.S.R. are reported. Two designs, the probe cone and the androgynous docking device are examined.

Bushuev, K.↗

Apollo-Soyuz Test Project

In May 1972, President Nixon and Chairman Kosygin signed an agreement which included the approval of the Apollo/Soyuz Test Project. The primary technical objective of the program is to test the requirements and solutions for the compatibility of systems for docking future manned spacecraft of the U.S. and the USSR. The program includes the flight test of a compatible rendezvous system and of a compatible docking system. Details concerning the equipment to be used are discussed along with the operational schedule. Attention is also given to a number of experiments which are to be conducted in space.

Slayton, D. K.↗

A description of hardware and mission planning for the Apollo-Soyuz Test Project

The Apollo-Soyuz Test Program (ASTP) is scheduled for flight in July 1975. This paper will describe briefly the mission planning and hardware associated with the program. Of interest are modifications to the basic Apollo and Soyuz vehicles as well as the newly developed docking module and docking system. Joint aspects of the mission profile are explained. Science objectives and corresponding experiments are described. Utilization of the ATS-6 Satellite for relay of TV, voice, and data to the ground is also a topic. The paper concludes with a discussion of the joint flight control interface.

Littleton, F. C.↗

Analytical stability and simulation response study for a coupled two-body system

An analytical stability study and a digital simulation response study of two connected rigid bodies are documented. Relative rotation of the bodies at the connection is allowed, thereby providing a model suitable for studying system stability and response during a soft-dock regime. Provisions are made of a docking port axes alignment torque and a despin torque capability for encountering spinning payloads. Although the stability analysis is based on linearized equations, the digital simulation is based on nonlinear models.

Tao, K. M.↗

Video guidance, landing, and imaging systems

The adaptive potential of video guidance technology for earth orbital and interplanetary missions was explored. The application of video acquisition, pointing, tracking, and navigation technology was considered to three primary missions: planetary landing, earth resources satellite, and spacecraft rendezvous and docking. It was found that an imaging system can be mechanized to provide a spacecraft or satellite with a considerable amount of adaptability with respect to its environment. It also provides a level of autonomy essential to many future missions and enhances their data gathering ability. The feasibility of an autonomous video guidance system capable of observing a planetary surface during terminal descent and selecting the most acceptable landing site was successfully demonstrated in the laboratory. The techniques developed for acquisition, pointing, and tracking show promise for recognizing and tracking coastlines, rivers, and other constituents of interest. Routines were written and checked for rendezvous, docking, and station-keeping functions.

Schappell, R. T.↗

A manipulator arm for zero-g simulations

A 12-ft counterbalanced Slave Manipulator Arm (SMA) was designed and fabricated to be used for resolving the questions of operational applications, capabilities, and limitations for such remote manned systems as the Payload Deployment and Retrieval Mechanism (PDRM) for the shuttle, the Free-Flying Teleoperator System, the Advanced Space Tug, and Planetary Rovers. As a developmental tool for the shuttle manipulator system (or PDRM), the SMA represents an approximate one-quarter scale working model for simulating and demonstrating payload handling, docking assistance, and satellite servicing. For the Free-Flying Teleoperator System and the Advanced Tug, the SMA provides a near full-scale developmental tool for satellite servicing, docking, and deployment/retrieval procedures, techniques, and support equipment requirements. For the Planetary Rovers, it provides an oversize developmental tool for sample handling and soil mechanics investigations. The design of the SMA was based on concepts developed for a 40-ft NASA technology arm to be used for zero-g shuttle manipulator simulations.

Brodie, S. B.↗

Tug avionics system overview

The recently defined Tug avionics system takes maximum advantage of projected technology advances to attain: low system weight; power system capacity essentially independent of mission duration; sensors for rendezvous, docking, and navigation update; all attitude communications; onboard checkout and redundancy management; and modular fault tolerant computer control. The requirements, selection trades, and configurations are discussed for the major subsystems: data management, guidance navigation and control, communications, rendezvous and docking, and electrical power. The integrated avionics system and the interfaces with the payload, Shuttle and ground are described.

Raaberg, M. T.↗

Apollo-Soyuz US-USSR joint mission results

The technical and nontechnical objectives of the Apollo-Soyuz mission are briefly considered. The mission demonstrated that Americans and Russians can work together to perform a very complex operation, including rendezvous in space, docking, and the conduction of joint experiments. Certain difficulties which had to be overcome were partly related to differences concerning the role of the astronaut in the basic alignment and docking procedures for space vehicles. Attention is also given to the experiments conducted during the mission and the approach used to overcome the language barrier.

Bean, A. L.↗

A novel technique for estimating relative motion

A potential method for determining the information needed for a successful docking between two vehicles, for example, an orbit-to-orbit shuttle and a malfunctioning satellite, is described. The method involves a single TV, used to obtain all the necessary information for docking and stationkeeping. Four passive reflectors, designed so that the electronically scanned images are distinguishable, are mounted on the satellite to provide the only means of cooperation required between the satellite and the shuttle. The relations for obtaining range and rate data from TV data are set forth.

Larson, V.↗

An evaluation of coding methodologies for potential use in the Alabama Resource Information System (ARIS)-transportation study for the state of Alabama

Procedures developed for digitizing the transportation arteries, airports, and dock facilities of Alabama and placing them in a computerized format compatible with the Alabama Resource Information System are described. The time required to digitize by the following methods: (a) manual, (b) Telereadex 29 with film reading and digitizing system, and (c) digitizing tablets was evaluated. A method for digitizing and storing information from the U. T. M. grid cell base which was compatible with the system was developed and tested. The highways, navigable waterways, railroads, airports, and docks in the study area were digitized and the data stored. The manual method of digitizing was shown to be best for small amounts of data, while the graphic input from the digitizing tablets would be the best approach for entering the large amounts of data required for an entire state.

Montgomery, O. L.↗

Development of concepts for satellite retrieval devices

The teleoperator being developed to augment the Space Transportation System (STS) for satellite placement, retrieval, or servicing at altitudes or orbital planes where it would be impractical to use the shuttle is primarily a general purpose propulsion stage that can be fitted with manipulator arms, automated servicers and satellite retrieval devices for particular missions. Design concepts for a general purpose retrieval device for docking with a satellite to which a grappling fixture has been attached, and for a retrieval device for docking with the Solar Maximum Mission (SMM) spacecraft were defined. The mechanical aspects of these two devices are discussed as well as the crew operations involved and problems created by the requirement for remote control. Drawings for the two retrieval device concepts are included.

Pruett, E. C.↗

The aerial relay system - An energy-efficient solution to the airport congestion problem

The aerial relay system concept, which was developed as a means of exploiting inflight transfer, utilizing large 'cruise liner' aircraft that fly continuously along their routes and dock periodically with short-haul 'feeder' aircraft for payload exchanges, is discussed. The system employs two distinctly different kinds of aircraft, one for takeoff and landing and one for cruising, with provisions for the routine inflight transfer of passengers, baggage, fuel, etc. The liner design consists of a module of 320 ft span and 80 ft chord with an 800 seat capacity and capable of cruising at 0.75 M, while the feeder is a relatively conventional short-haul transport aircraft with a modified fuselage to accommodate special docking and transportation operations. It is concluded that this concept could alleviate present inadequacies in an extremely cost-effective and fuel-efficient way, and could be expanded indefinitely to become a high-quality, high-capacity national system.

Kyser, A. C.↗

The design and development of an end effector for the shuttle remote manipulator system

The design requirements, the design, and qualification and development test problems encountered on the Remote Manipulator End Effector are described. The constraints and interfaces with the arm, the Orbiter, and the payload are identified. The design solution to meet the requirements is a unique device that provides a soft-docking feature termed capture and a hard-docking feature termed rigidization.

Daniell, R. G.↗

Experiments with optical instruments

Photography was used to document known defects of the periscopic instrument used to check spacecrews in the descent module of the Soyuz T-4. The screen of the altitude control unit was also photographed and revealed glare in the central field of vision. A light filter was installed in the peripheral window to observe the Sun and horizon of the Earth. Checking attitude control by means of polaroids enabled a 5 further advance (500 km) into the zone of shadow. The attitude control unit was used to check the orbital orientation with respect to the vertical during the night segment of flight. A lens screen was used for the emission glow of the atmosphere at an altitude of about 100 km. Docking of the Soyuz T-4 was observed by means of an onboard display, a television camera, and a sighting device. From a distance of about 5 km, the space station could be seen as a bright dot in the sighting device. Docking occurred in shadow.

Savinykh, V.↗

Space Station Control Requirements and Flywheel System Weights for Combined Momentum and Energy Storage

The specifications of the flywheel system for momentum storage and vehicle torquing are somewhat dependent upon the attitude control requirements of the space station in orbit. As a ground rule, the flywheel system will be sized large enough to provide all attitude maneuvers, if practical, to avoid or minimize turning on the reaction control system (RCS). The RCS, whenever used, expels expensive mass and tends to contaminate optical surfaces of the vehicle. The vehicle rate and acceleration specifications of 0.10 deg/sec and 0.01 deg/square sec are tentative, and may be reduced if lesser values are more practical for flywheel design. For local vertical attitude hold, the average attitude error should be zero, and not the classical 1 degree, since control moment gyro (CMG) gimbal angles provide an exact reference feedback for gravity gradient momentum. Docking presents a problem for docking transients and attitude alignment which will require use of the RCS.

Elam, F. M.↗