Search NASA⌕ Search

SEARCH · Search NASA

Results for “efficiency maximization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Influence of simulated microgravity on the maximal oxygen consumption of nontrained and trained rats

The effects of microgravity and endurance training (TR) on maximal O2 consumption was investigated in trained and nontrained (NT) rats subjected to head-down suspension (HDS) by comparing maximal O2 consumption, treadmill run time (RT), and mechanical efficiency (ME) of treadmill running in HDS rats, both NT and TR, and in respective cage controls. It was found that HDS for 28 days was associated with significant reduction in absolute maximal O2 consumption in both TR and NT rats. Relative maximal O2 consumption, however, was significantly reduced in TR but not NT rats. Reductions in RT and ME occurring in both TR and NT rats after 28 days of HDS were similar. The TR rats exhibited greater diuretic, natriuretic, and kaliuretic responses to HDS than the NT rats.

Woodman, Christopher R.↗
DOE OSTI2024

Control-inspired design and power optimization of an active mechanical motion rectifier based power takeoff for wave energy converters

Ocean waves have high energy density and are persistent and predictable. Yet, converting wave energy to a useable form remains challenging. A significant hurdle is the oscillatory nature of waves resulting in the alternating loads, which necessitate the use of rectification at some stage of the energy conversion. This research effort presents a novel design of active mechanical motion rectifier (AMMR) for the power takeoff (PTO), which provides enhanced controllability and better power performance when compared to passive mechanical motion rectifiers (MMR). Inspired by transistors used in synchronous electrical rectifiers, the proposed design uses controllable electromagnetic clutches in the mechanical transmission to allow active engagement-disengagement control; thus, rectifying the oscillatory motion into a unidirectional rotation for high energy conversion efficiency and allowing the generator in unidirectional rotation to control the bidirectional wave capture structure for maximizing the power output. A semi-analytical computational approach is developed to efficiently evaluate the optimal power achieved using the proposed AMMR-based PTO and active control. It is found that the AMMR-based PTO design yields a higher optimal power than the previous passive MMR design across the wave spectrum. The influences of generator inertia and reactive power are discussed. Furthermore, the effects of control parameters on the power output and the optimal trajectories are analyzed. Wave tank tests with the AMMR prototype demonstrated the effectiveness of AMMR based PTO design and validated the numerical analysis.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Increasing the Carbohydrate Output of Bamboo Using a Combinatorial Pretreatment

Bamboo represents a family of highly lignified biomass with significant resistance to cellulolytic enzyme degradation, and typically, a severe thermochemical pretreatment is needed to overcome its recalcitrance for producing fermentable sugars. Combinatorial pretreatments with a low holding temperature and low alkali dosage were investigated in this study in an attempt to remove the impediments to the accessibility of bamboo cellulose to enzymes and enable the efficient conversion of hemicellulose. Upon autohydrolysis at 180 °C, more than half of the hemicellulose (~58%) was solubilized, contributing to further delignification in the subsequent dilute alkali extraction (DAE). The solubilized hemicellulose mainly existed in the form of soluble xylan, which, after a novel endo-β-1,4-xylanase hydrolysis, generated a large amount of xylo-oligosaccharides with the xylobiose and xylotriose proportion reaching 72.99%. After the fractionation with combinatorial pretreatments, cellulose and xylose enzymatic hydrolysis yields were 73.36 and 86.98%, respectively, representing increments of 22.42 and 43.15% compared with the sole autohydrolysis process. Fluorescence microscopy (FM) and confocal Raman microscopy (CRM) images revealed that these dramatic improvements were caused by the deconstruction of the bamboo cell walls, including separation of the adjacent cell walls, removal of hemicellulose and lignin, migration and redistribution of lignin, and the increased exposure of cellulose. In addition, lignin chemical structure variations during the combinatorial pretreatment were analyzed with gel permeation chromatography (GPC), 2D HSQC NMR, and 31 P NMR, and the correlation between the lignin structure and enzymatic hydrolysis efficiency was investigated. In summary, this study highlighted the application of combinatorial pretreatments to maximize the carbohydrate output of bamboo and unveiled their mechanism that enabled the high-efficiency utilization of bamboo.

09 BIOMASS FUELS↗
DOE OSTI2015

Efficient frequency conversion by stimulated Raman scattering in a sodium nitrate aqueous solution

Frequency conversion of laser beams, based on stimulated Raman scattering (SRS) is an appealing technique for generating radiation at new wavelengths. Here, we investigated experimentally the SRS due to a single pass of a collimated frequency-doubled Nd:YAG laser beam (532 nm) through a saturated aqueous solution of sodium nitrate (NaNO{sub 3}), filling a 50 cm long cell. These experiments resulted in simultaneous generation of 1st (564 nm) and 2nd (599 nm) Stokes beams, corresponding to the symmetric stretching mode of the nitrate ion, ν{sub 1}(NO{sub 3}{sup −}), with 40 and 12 mJ/pulse maximal converted energies, equivalent to 12% and 4% efficiencies, respectively, for a 340 mJ/pulse pump energy. The results indicate that the pump and SRS beams were thermally defocused and that four-wave mixing was responsible for the second order Stokes process onset.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Co(II) Substitution Enhances the Esterase Activity of a de Novo Designed Zn(II) Carbonic Anhydrase

Abstract Carbonic Anhydrases (CAs) have been a target forde novoprotein designers due to the simplicity of the active site and rapid rate of the reaction. The first reported mimic contained a Zn(II) bound to three histidine imidazole nitrogens and an exogenous water molecule, hence closely mimicking the native enzymes’ first coordination sphere. Co(II) has served as an alternative metal to interrogate CAs due to its d 7 electronic configuration for more detailed solution characterization. We present here the Co(II) substituted [Co(II)(H 2 O/OH − )] N (TRIL2WL23H) 3 n+ that behaves similarly to native Co(II) substituted human‐CAs. Like the Zn(II) analogue, the cobalt‐derivative at slightly basic pH is incapable of hydrolyzing p‐nitrophenylacetate (pNPA); however, as the pH is increased a significant activity develops, which at pH values above 10 eventually yields a catalytic efficiency that exceeds that of the [Zn(II)(OH − )] N (TRIL2WL23H) 3 + peptide complex. X‐ray absorption analysis is consistent with an octahedral species at pH 7.5 that converts to a 5‐coordinate species by pH 11. UV‐vis spectroscopy can monitor this transition, giving a pK a for the conversion of 10.3. We assign this conversion to the formation of a 5‐coordinate Co(II)(N imid ) 3 (OH)(H 2 O) species. The pH dependent kinetic analysis indicates the maximal rate (k cat ), and thus the catalytic efficiency (k cat /K m ), follow the same pH profile as the spectroscopic conversion to the pentacoordinate species. This correlation suggests that the chemically irreversible ester hydrolysis corresponds to the rate determining process.

Chemistry↗
NASA NTRS2001

Infrared Communications for Small Spacecraft: From a Wireless Bus to Cluster Concepts

Nanosatellites operating singly or in clusters are anticipated for future space science missions. To implement this new communications paradigm, we are approaching cluster communications by first developing an infrared (IR) intra-craft wireless bus capability, following initially the MIL-STD-1553B protocol. Benefits of an IR wireless bus are low mass, size, power, and cost, simplicity of implementation, ease of use, minimum EMI, and efficient and reliable data transfer. Our goals are to maximize the reliable link margin in order to afford greater flexibility in receiver placement, which will ease technology insertion. We have developed a concept demonstration using a high-speed visible-band silicon PIN photodiode and a high-efficiency visible LED operating at a data rate up to 4 Mb/sec. In designing an internal IR wireless bus, we have characterized various candidate materials, emitters, and geometries, assuming a single reflection. Thus, we have measured the bidirectional reflectance distribution function (BRDF) for five different materials characteristic of typical spacecraft structures, which range from nearly Lambertian to highly specular. We have fit our data to empirical BRDF functions and modeled the detected irradiance anywhere in the plane of incidence for a divergent (LED) emitter. We have also determined the angular limits on the link geometry to remain within the required bit error rate by determining the received signal-to-noise ratio (SNR) for minimum values of irradiance received at the detector.

Webb, Suzanne C.↗
DOE OSTI2017

The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells

CdTe devices have reached efficiencies of 22% due to continuing improvements in bulk material properties, including minority carrier lifetime. Device modeling has helped to guide these device improvements by quantifying the impacts of material properties and different device designs on device performance. One of the barriers to truly predictive device modeling is the interdependence of these material properties. For example, interfaces become more critical as bulk properties, particularly, hole density and carrier lifetime, increase. We present device-modeling analyses that describe the effects of recombination at the interfaces and grain boundaries as lifetime and doping of the CdTe layer change. The doping and lifetime should be priorities for maximizing open-circuit voltage (V oc ) and efficiency improvements. However, interface and grain boundary recombination become bottlenecks for device performance at increased lifetime and doping levels. In conclusion, this work quantifies and discusses these emerging challenges for next-generation CdTe device efficiency.

14 SOLAR ENERGY↗
DOE OSTI2015

High density LHRF experiments in Alcator C-Mod and implications for reactor scale devices

Parametric decay instabilities (PDI) appear to be an ubiquitous feature of lower hybrid current drive (LHCD) experiments at high density. In density ramp experiments in Alcator C-Mod and other machines the onset of PDI activity has been well correlated with a decrease in current drive efficiency and production of fast electron bremsstrahlung. However whether PDI is the primary cause of the 'density limit', and if so by exactly what mechanism (beyond the obvious one of pump depletion) has not been clearly established. In order to further understand the connection, the frequency spectrum of PDI activity occurring during Alcator C-Mod LHCD experiments has been explored in detail by means of a number of RF probes distributed around the periphery of the C-Mod tokamak including a probe imbedded in the inner wall. The results show that (i) the excited spectra consists mainly of a few discrete ion cyclotron (IC) quasi-modes, which have higher growth than the ion sound branch; (ii) PDI activity can begin either at the inner or outer wall, depending on magnetic configuration; (iii) the frequencies of the IC quasi-modes correspond to the magnetic field strength close to the low-field side (LFS) or high-field side separatrix; and (iv) although PDI activity may initiate near the inner separatrix, the loss in fast electron bremsstrahlung is best correlated with the appearance of IC quasi-modes characteristic of the magnetic field strength near the LFS separatrix. These data, supported by growth rate calculations, point to the importance of the LFS scrape-off layer (SOL) density in determining PDI onset and degradation in current drive efficiency. By minimizing the SOL density it is possible to extend the core density regime over which PDI can be avoided, thus potentially maximizing the effectiveness of LHCD at high density. Increased current drive efficiency at high density has been achieved in FTU and EAST through lithium coating and special fuelling methods, and in recent C-Mod experiments by operating at higher plasma current. Another approach would be to locate the launcher in the inner wall with double null operation. This would reduce the SOL density by an order of magnitude or more and greatly mitigate the effects of PDI as well as other parasitic losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Cost of Deconstruction Depots for Diversified, Waste-Based Lignocellulosic Sugars Using Distillable Solvents

Transitioning to a bioeconomy that makes use of low-emission and waste feedstocks requires greater flexibility to accommodate seasonal variations and mitigate long-term storage challenges, such as material loss and fire risk. To achieve this goal, biomass deconstruction technologies must efficiently handle diverse feedstocks. Here, we assess the cost of using butylaminea distillable solventto deconstruct 22 different biomass feedstocks: 7 herbaceous, 9 woody, 4 food processing residues, and 2 blends. Lignocellulosic sugar production costs, based on current empirical data, range from $1.3 to 6.1/kg, suggesting that substantial improvements are required to compete with conventional sugars. The high solvent loading (850 g/kg of whole slurry) is a process bottleneck. Lowering the solvent loading to 59 g/kg of whole slurry, demonstrated in an L-scale reactor using poplar biomass, reduces the minimum sugar selling price by 33%. Solvent loading and recovery, solid loading, sugar yield, enzyme use, and delivered biomass cost all play key roles in reaching sugar production costs of $0.45-0.79/kg. Strategic feedstock blending to maximize carbohydrate content, process optimization to improve conversion efficiency, and the selection of low-cost feedstocks are important to advancing feedstock-flexible biorefineries.

TEA↗
DOE OSTI2015

Design of polarizers for a mega-watt long-pulse millimeter-wave transmission line on the large helical device

The polarizer is one of the critical components in a high-power millimeter-wave transmission line. It requires full and highly efficient coverage of any polarization states, high-power tolerance, and low-loss feature. Polarizers with rounded shape at the edge of the periodic groove surface are designed and fabricated by the machining process for a mega-watt long-pulse millimeter-wave transmission line of the electron cyclotron resonance heating system in the large helical device. The groove shape of λ/8- and λ/4-type polarizers for an 82.7 GHz transmission line is optimally designed in an integral method developed in the vector theories of diffraction gratings so that the efficiency to realize any polarization state can be maximized. The dependence of the polarization states on the combination of the two polarizer rotation angles (Φ{sub λ/8}, Φ{sub λ/4}) is examined experimentally in a low-power test with the newly developed polarization monitor. The results show that the measured polarization characteristics are in good agreement with the calculated ones.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2006

NASA Solar Array Demonstrates Commercial Potential

A state-of-the-art solar-panel array demonstration site at NASA's Dryden Flight Research Center provides a unique opportunity for studying the latest in high-efficiency solar photovoltaic cells. This five-kilowatt solar-array site (see Figure 1) is a technology-transfer and commercialization success for NASA. Among the solar cells at this site are cells of a type that was developed in Dryden Flight Research Center s Environmental Research Aircraft and Sensor Technology (ERAST) program for use in NASA s Helios solar-powered airplane. This cell type, now denoted as A-300, has since been transferred to SunPower Corporation of Sunnyvale, California, enabling mass production of the cells for the commercial market. High efficiency separates these advanced cells from typical previously commercially available solar cells: Whereas typical previously commercially available cells are 12 to 15 percent efficient at converting sunlight to electricity, these advanced cells exhibit efficiencies approaching 23 percent. The increase in efficiency is due largely to the routing of electrical connections behind the cells (see Figure 2). This approach to increasing efficiency originated as a solution to the problem of maximizing the degree of utilization of the limited space available atop the wing of the Helios airplane. In retrospect, the solar cells in use at this site could be used on Helios, but the best cells otherwise commercially available could not be so used, because of their lower efficiencies. Historically, solar cells have been fabricated by use of methods that are common in the semiconductor industry. One of these methods includes the use of photolithography to define the rear electrical-contact features - diffusions, contact openings, and fingers. SunPower uses these methods to produce the advanced cells. To reduce fabrication costs, SunPower continues to explore new methods to define the rear electrical-contact features. The equipment at the demonstration site includes two fixed-angle solar arrays and one single-axis Sun-tracking array. One of the fixed arrays contains typical less-efficient commercial solar cells and is being used as a baseline for comparison of the other fixed array, which contains the advanced cells. The Sun-tracking array tilts to follow the Sun, using an advanced, real-time tracking device rather than customary pre-programmed mechanisms. Part of the purpose served by the demonstration is to enable determination of any potential advantage of a tracking array over a fixed array. The arrays are monitored remotely on a computer that displays pertinent information regarding the functioning of the arrays.

Creech, Gray↗
DOE OSTI2024

Responses of Marginal and Intrinsic Water-Use Efficiency to Changing Aridity Using FLUXNET Observations

According to classic stomatal optimization theory, plant stomata are regulated to maximize carbon assimilation for a given water loss. A key component of stomatal optimization models is marginal water-use efficiency (mWUE), the ratio of the change of transpiration to the change in carbon assimilation. Although the mWUE is often assumed to be constant, variability of mWUE under changing hydrologic conditions has been reported. However, there has yet to be a consensus on the patterns of mWUE variabilities and their relations with atmospheric aridity. We investigate the dynamics of mWUE in response to vapor pressure deficit (VPD) and aridity index using carbon and water fluxes from 115 eddy covariance towers available from the global database FLUXNET. We demonstrate a non-linear mWUE-VPD relationship at a sub-daily scale in general; mWUE varies substantially at both low and high VPD levels. However, mWUE remains relatively constant within the mid-range of VPD. Despite the highly non-linear relationship between mWUE and VPD, the relationship can be informed by the strong linear relationship between ecosystem-level inherent water-use efficiency (IWUE) and mWUE using the slope, m *. We further identify site-specific m * and its variability with changing site-level aridity across six vegetation types. We suggest accurately representing the relationship between IWUE and VPD using Michaelis–Menten or quadratic functions to ensure precise estimation of mWUE variability for individual sites.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

An experimental and theoretical analysis of the aerodynamic characteristics of a biplane-winglet configuration

Improving the aerodynamic characteristics of an airplane with respect to maximizing lift and minimizing induced and parasite drag are of primary importance in designing lighter, faster, and more efficient aircraft. Previous research has shown that a properly designed biplane wing system can perform superiorly to an equivalent monoplane system with regard to maximizing the lift-to-drag ratio and efficiency factor. Biplanes offer several potential advantages over equivalent monoplanes, such as a 60-percent reduction in weight, greater structural integrity, and increased roll response. The purpose of this research is to examine, both theoretically and experimentally, the possibility of further improving the aerodynamic characteristics of the biplanes configuration by adding winglets. Theoretical predictions were carried out utilizing vortex-lattice theory, which is a numerical method based on potential flow theory. Experimental data were obtained by testing a model in the Pennsylvania State University's subsonic wind tunnel at a Reynolds number of 510,000. The results showed that the addition of winglets improved the performance of the biplane with respect to increasing the lift-curve slope, increasing the maximum lift coefficient, increasing the efficiency factor, and decreasing the induced drag. A listing of the program is included in the Appendix.

Gall, P. D.↗
DOE OSTI2019

The Physics of the Accelerating Universe Camera

The Physics of the Accelerating Universe (PAU) Survey goal is to obtain photometric redshifts (photo-z) and spectral energy distributions (SEDs) of astronomical objects with a resolution roughly one order of magnitude better than current broadband (BB) photometric surveys. To accomplish this, a new large field-of-view (FoV) camera (PAUCam) has been designed, built, and commissioned and is now operated at the William Herschel Telescope (WHT). With the current WHT prime focus corrector, the camera covers an ∼1° diameter FoV, of which only the inner ∼40′ diameter is unvignetted. The focal plane consists of a mosaic of 18 2k × 4k Hamamatsu fully depleted CCDs, with high quantum efficiency up to 1 μm in wavelength. To maximize the detector coverage within the FoV, filters are placed in front of the CCDs inside the camera cryostat (made out of carbon fiber) using a challenging movable tray system. The camera uses a set of 40 narrowband filters ranging from ∼4500 to ∼8500 Å complemented with six standard BB filters, ugrizY. The PAU Survey aims to cover roughly 100 deg{sup 2} over fields with existing deep photometry and galaxy shapes to obtain accurate photometric redshifts for galaxies down to i {sub AB} ∼ 22.5, also detecting galaxies down to i {sub AB} ∼ 24 with less precision in redshift. With this data set, we will be able to measure intrinsic alignments and galaxy clustering and perform galaxy evolution studies in a new range of densities and redshifts. Here we describe the PAU camera, its first commissioning results, and its performance.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Opportunities to Implement Solutions to Achieve Remedial Action Objectives in Consideration of Stakeholder Interests - 20365

A case study in the implementation of a soils excavation and removal project conducted at a Formerly Utilized Sites Remedial Action Program (FUSRAP) Maywood Superfund Site (FMSS) vicinity property; an active commercial business, in a densely populated area, with significant operational, technical and, logistical constraints that were expected to limit areas that could be remediated. The United States Army Corps of Engineers-led (USACE) team successfully navigated complex overlapping stakeholder interests to achieve a more efficient and complete removal of contaminated soils and debris while minimizing unnecessary excess costs to the Government. This paper centers on FUSRAP activities at the FMSS vicinity property located at 149-151 Maywood Avenue, Maywood, Bergen County, New Jersey. For most of its FUSRAP history, this ∼109,000 square meter (27-acre) property housed a now-demolished ∼26,000 square meter (6.5-acre) warehouse operated by Sears Logistics Services, a unit of the Sears Roebuck Company (Figure 2). Sears ended its property lease and vacated the warehouse in December 2016. Given that long history and for the purposes of this paper, the property will be referred to as the 'Sears property' or simply 'the property.' The Sears property is approximately 109,000 square meters (27-acres) and is currently zoned for commercial use. The property is bound to the north and northwest by 100 West Hunter Avenue (the Stepan Company), to the northeast by 205 Maywood Avenue, to the east by Maywood Avenue, to the south by 23 West Howcroft Road, and to the west by businesses on NJ Route 17 and the NJ Route 17 roadway. Until December 2016, the property housed a warehouse and distribution center operated by Sears Logistical Services. On-site structures were demolished by the property owner in 2017. The warehouse covered the north section of the property along the Stepan Company property line. A railroad spur from the adjacent property now known as the Maywood Interim Storage Site (MISS) ended at the northeast corner of the warehouse. Wetlands were located east of the warehouse; the rest of the property was covered with paved parking lots and grassed areas. During remediation at the property, opportunities frequently arose where the project team was able to coordinate effectively with stakeholders to sequence remediation activities to facilitate removal of otherwise inaccessible soils and identify opportunities for materials reuse when supported by residual radiological and chemical levels. Some specific opportunities include: - remediating individual truck loading dock bays to maintain tenant operations; - working along a busy highway and in a utility corridor containing a 30-inch high pressure gas main; - remediating Lodi Brook and associated wetlands requiring bypass pumping and other diversionary structures to maintain local community stormwater drainage; - protecting during remediation and supporting access to facilitate tenant/owner maintenance of critical fire protection and water supply system service lines buried in contaminated soils and necessary for safe warehouse operations; and - coordinating with stakeholders to ensure non-radiological contaminants of concern for the site (unaffiliated with FUSRAP) were addressed by the responsible party in a manner that maximized benefit to all parties while supporting an efficient overall site remediation program. Once the property was vacant and the warehouse structure and radiologically non-impacted above-grade structures were demolished, the project identified an opportunity to significantly reduce the volume of waste associated with the foundation of the former warehouse, a foundation suspected of being partially constructed in radiologically contaminated soils. The project developed and implemented supplemental radiological verification survey and sampling strategies based on radiological cross-contamination risk potential with process flow-charts and screening-level based decision points; a program that classified saw-cut sections of concrete based on observed residual surface radioactivity conditions using a combination of gamma sensitive sodium-iodide scans and beta sensitive Geiger-Muller direct measurements. The proposed approach was reviewed with stakeholders with feedback, including consideration of applicable State of New Jersey Site Remediation Program criteria and guidance before implementation. Once classified, additional sampling was performed at frequencies driven by screening. The sampling methods, stockpile sampling frequencies, criteria and, approach to data evaluation were developed in consideration of existing site cleanup standards, regional background ranges, State of New Jersey radiological remediation program guidance, and specific stakeholder input With the property remediation and survey efforts nearly completed, it is relevant to examine retrospectively the objectives, assumptions and limitations in the remedial design (i.e., what was planned) versus what was able to be accomplished through effective teaming. Benefits to other environmental remediation site programs include better understanding of how to work effectively with stakeholders to achieve win-win outcomes, and approaches to site remediation, waste minimization and materials reuse that were successful in their overall outcomes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Evaluating tradeoffs between energy efficiency and color rendition

Color rendition and energy efficiency have long been considered characteristics of light sources that cannot be maximized simultaneously. The tradeoff has been studied extensively, but usually considering only average color fidelity. This work examines the color rendition versus energy efficiency tradeoff in the context of ANSI/IES TM-30-18, Method for Evaluating Light Source Color Rendition, which provides numerous measures beyond average color fidelity. The analysis demonstrates that color rendition criteria based on combinations of ANSI/IES TM-30-18 values can be used to improve color quality with less of an effect on spectral efficiency (luminous efficacy of radiation) than increasing CIE Ra alone. No change in the direction of LED emitter or downconverter development is needed.

Royer, Michael P.↗
NASA NTRS1982

The economics of bootstrapping space industries - Development of an analytic computer model

A simple economic model of 'bootstrapping' industrial growth in space and on the Moon is presented. An initial space manufacturing facility (SMF) is assumed to consume lunar materials to enlarge the productive capacity in space. After reaching a predetermined throughput, the enlarged SMF is devoted to products which generate revenue continuously in proportion to the accumulated output mass (such as space solar power stations). Present discounted value and physical estimates for the general factors of production (transport, capital efficiency, labor, etc.) are combined to explore optimum growth in terms of maximized discounted revenues. It is found that 'bootstrapping' reduces the fractional cost to a space industry of transport off-Earth, permits more efficient use of a given transport fleet. It is concluded that more attention should be given to structuring 'bootstrapping' scenarios in which 'learning while doing' can be more fully incorporated in program analysis.

Goldberg, A. H.↗
NASA NTRS1979

Efficient digital encoding scheme

Modified NRZ (non-return-to-zero) code immunizes record and playback systems against dc drift and bit slippage. In order to maximize bit packing density improved code called J-NRZ gives 100 percent NRZ efficiently and solves DC drift problem by adding check bits in specified format when long string is encountered. Remainder of data stream is encoded in NRZ format.

Obrien, D. E., III↗