Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

High-Temperature 2D Optical Relaxation Visualizes Enhanced Oxygen Exchange Kinetics at Metal-Mixed Conducting Oxide Interfaces

Solid-state heterointerfaces are of interest for emergent local behavior that is distinct from either bulk parent compound. One technologically relevant example is the case of mixed ionic/electronic conductor (MIEC)–metal interfaces, which play an important role in electrochemistry. Metal–MIEC composite electrodes can demonstrate improved catalytic activity vs single-phase MIECs, improving fuel cell efficiency. Similarly, MIEC surface reaction kinetics are often evaluated using techniques that place metal current collectors in contact with the surface under evaluation, potentially altering the response vs the native surface. Here, techniques enabling direct and local in situ observation of the behavior at and around such heterointerfaces are needed. Here, we develop a spatially resolved optical transmission relaxation (2D-OTR) method providing continuous evaluation of local, high-temperature, controlled atmosphere defect kinetics across a ~1 cm2 sample area simultaneously in a contact-free manner. We apply it to observe the spatial variance of oxygen incorporation and evolution rates at ~525–620 °C, in response to step changes in oxygen partial pressure, on MIEC SrTi 0.65 Fe 0.35 O 3–x films as a function of distance from porous Pt and Au layers. Using this model geometry, we find significant enhancements in kinetics adjacent to the metals that decay over a few millimeter distance. To extract kinetic parameters, we fit the short-term optical data (initial portion of relaxations) with an exponential decay function appropriate for surface-exchange-limited kinetics, yielding apparent surface exchange coefficients (k chem ) with spatial resolution, decreasing with distance from the metal. To understand the kinetic processes governing the complete (long-term) optical relaxations, we performed COMSOL simulations, which demonstrated that a combination of laterally varying k chem and in-plane diffusion controls the observed kinetics over the full time range. Further support for spatially varying kchem comes from demonstrations of changing surface and bulk chemistry vs distance from the metal–MIEC interface, by X-ray photoelectron and optical absorption spectroscopies, respectively. Although microporous Pt and Au are not excellent electrodes in isolation, both metals exert a synergistic effect on the oxygen surface exchange rate in the presence of the mixed conducting film.

36 MATERIALS SCIENCE↗

Interfacial water asymmetry at ideal electrochemical interfaces

Controlling electrochemical reactivity requires a detailed understanding of the charging behavior and thermodynamics of the electrochemical interface. Experiments can independently probe the overall charge response of the electrochemical double layer by capacitance measurements and the thermodynamics of the inner layer with potential of maximum entropy measurements. Relating these properties by computational modeling of the electrochemical interface has so far been challenging due to the low accuracy of classical molecular dynamics (MD) for capacitance and the limited time and length scales of ab initio MD. Here, we combine large ensembles of long-time-scale classical MD simulations with charge response from electronic density functional theory to predict the potential-dependent capacitance of a family of ideal aqueous electrochemical interfaces with different peak capacitances. We show that while the potential of maximum capacitance varies, this entire family exhibits an electrode charge of maximum capacitance (CMC) between -2.9 and -2.2 μC/cm 2 , regardless of the details in the electronic response. Simulated heating of the same interfaces reveals that the entropy peaks at a charge of maximum entropy (CME) of -5.1 ± 0.6 μC/cm 2 , in agreement with experimental findings for metallic electrodes. The CME and CMC both indicate asymmetric response of interfacial water that is stronger for negatively charged electrodes, while the difference between CME and CMC illustrates the richness in behavior of even the ideal electrochemical interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET

The interface region of welded A508–Alloy 52 M is characterized by scanning probe microscope (SPM) techniques, scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM)/Energy Dispersive Spectroscopy (EDS) and scanning vibrate electrode technique (SVET). The regions along the welded A508–Alloy 52 M interface can be categorized into two types according to their different microstructures. In the type-I interface region, A508 and Alloy 52 M are separated by the fusion boundary, while in the type-II interface region, A508 and Alloy 52 M are separated by a martensite zone. A508, martensite zone and grain boundaries in Alloy 52 M are ferromagnetic while the Alloy 52 M matrix is paramagnetic. The Volta potentials measured by scanning Kelvin probe force microscopy (SKPFM) of A508, martensite zone and Alloy 52 M follow the order: V{sub 52} {sub M} > V{sub A508} > V{sub martensite}. The corrosion behavior of A508–Alloy 52 M interface region is galvanic corrosion, in which Alloy 52 M is cathode while A508 is anode. The martensite dissolves faster than Alloy 52 M, but slower than A508 in the test solution. - Highlights: • The A508–Alloy 52 M interface regions can be categorized into two types. • The chromium depleted region is observed along the Alloy 52 M grain boundary. • The Alloy 52 M grain boundaries which are close to the interface are ferromagnetic. • Martensite zone has lower Volta potential but higher corrosion resistance than A508.

36 MATERIALS SCIENCE↗

In situ polymerized succinonitrile-based solid polymer electrolytes for lithium ion batteries

Novel solid polymer electrolytes based on succinonitrile (SN) plastic crystal electrolyte (SN-PCE) and polymerized ionic liquid (PIL) has been successfully synthesized via an in-situ method. The fabricated electrolyte (PIL-SN-PCE) is uniformly inlayed into the supporting matrix of polyimide, which effectively ameliorates the mechanical properties of the electrolyte. PIL can effectively enhance the thermal stability of electrolytes up to 300 °C and mitigate the parasitic reactions between the electrolytes and the electrodes. PIL-SN-PCE exhibits a remarkable oxidation ability up to 5.4 V vs Li/Li + and a high room temperature ionic conductivity of 6.54 × 10 -4 S cm -1 . Furthermore, in-situ formed interface in PIL-SN-PCE guarantee an excellent compatibility with different electrodes, which can effectively improve the cycle stability and rate performances of both half-cells and full cells. Finally, PIL-SN-PCE is considered as a promising electrolyte for high energy density lithium-ion batteries.

25 ENERGY STORAGE↗

Graphene/GaN diodes for ultraviolet and visible photodetectors

The Schottky diodes based on graphene/GaN interface are fabricated and demonstrated for the dual-wavelength photodetection of ultraviolet (UV) and green lights. The physical mechanisms of the photoelectric response of the diodes with different light wavelengths are different. For UV illumination, the photo-generated carriers lower the Schottky barrier and increase the photocurrent. For green light illumination, as the photon energy is smaller than the bandgap of GaN, the hot electrons excited in graphene via internal photoemission are responsible for the photoelectric response. Using graphene as a transparent electrode, the diodes show a ∼mS photoresponse, providing an alternative route toward multi-wavelength photodetectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-Dimensional Contact Layers for Enhanced Perovskite Photodiodes

Controlling defects and energy-band alignments are of paramount importance to the development of high-performance perovskite-based photodiodes. Yet, concurrent improvements in interfacial contacts and defect reduction simply by tailoring bottom contacts have not been investigated. An effective strategy is reported that can simultaneously improve energy-band alignments and structural defects by introducing low-dimensional contact (LDC) layers at the bottom interface. It is found that LDC-based perovskites considerably suppress undesirable structural defects induced by microstrains, resulting in reduced nonradiative recombination centers and improved carrier lifetimes. Additionally, the resulting LDC-based interface structures help block minority carrier injection from the electrodes by forming built-in electric fields. As a consequence, LDC-based perovskite photodiodes showed improved light detection capabilities. Finally, the result opens an avenue to yield highly efficient photodiodes.

36 MATERIALS SCIENCE↗

Analytical Modeling of Triple-Metal Hetero-Dielectric DG SON TFET

In this paper, a 2-D analytical model of triple-metal hetero-dielectric DG TFET is presented by combining the concepts of triple material gate engineering and hetero-dielectric engineering. Three metals with different work functions are used as both front- and back gate electrodes to modulate the barrier at source/channel and channel/drain interface. In addition to this, front gate dielectric consists of high-K HfO{sub 2} at source end and low-K SiO{sub 2} at drain side, whereas back gate dielectric is replaced by air to further improve the ON current of the device. Surface potential and electric field of the proposed device are formulated solving 2-D Poisson’s equation and Young’s approximation. Based on this electric field expression, tunneling current is obtained by using Kane’s model. Several device parameters are varied to examine the behavior of the proposed device. The analytical model is validated with TCAD simulation results for proving the accuracy of our proposed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deepening the LUMO: Brominated Naphthalene Diimide Electron Transport Layers for Low-Hysteresis Perovskite Solar Cells

Precise energy level alignment at the interfaces between the charge transport layers, active layer, and electrodes plays a key role in maximizing photovoltaic performance and operational stability in perovskite solar cells (PSCs). Organic electron transport layers (ETLs) have received little attention compared to their inorganic counterparts but offer the unique advantage of facile functionalization for fine-tuning of electronic properties. Here, we report the design, synthesis, and characterization of two benzyl-phosphonic acid (BnPA)-functionalized naphthalene diimide (NDI) derivatives, NDI-(BnPA) 2 and Br 2 -NDI-(BnPA) 2 as organic ETLs for PSCs in an n-i-p device configuration. Bromination of the NDI core at the 4,9-positions deepens the lowest unoccupied molecular orbital (LUMO) in Br 2 -NDI-(BnPA) 2 by 0.29 eV, enabling improved energy alignment with the conduction band minimum of the perovskite. Devices incorporating Br 2 -NDI-(BnPA) 2 demonstrated enhanced short-circuit current density (JSC), reduced hysteresis, and a maximum power conversion efficiency of 13.67%, compared to 13.20% for the unsubstituted NDI-(BnPA) 2 analog. The deeper LUMO of Br 2 -NDI-(BnPA) 2 is hypothesized to facilitate more efficient electron extraction, suppress interfacial charge accumulation, and reduce field-driven ion migration, collectively contributing to the observed reduction in hysteresis. These results highlight the effectiveness of combining molecular-level LUMO tuning with robust interfacial anchoring to advance the performance and durability of organic ETLs in PSCs.

Deposition↗

Interfacial electronic transport phenomena in single crystalline Fe-MgO-Fe thin barrier junctions

Spin filtering effects in nano-pillars of Fe-MgO-Fe single crystalline magnetic tunnel junctions are explored with two different sample architectures and thin MgO barriers (thickness: 3–8 monolayers). The two architectures, with different growth and annealing conditions of the bottom electrode, allow tuning the quality of the bottom Fe/MgO interface. As a result, an interfacial resonance states (IRS) is observed or not depending on this interface quality. The IRS contribution, observed by spin polarized tunnel spectroscopy, is analyzed as a function of the MgO barrier thickness. Our experimental findings agree with theoretical predictions concerning the symmetry of the low energy (0.2 eV) interfacial resonance states: a mixture of Δ{sub 1}-like and Δ{sub 5}-like symmetries.

36 MATERIALS SCIENCE↗

Analytical modeling and simulation of electrical contact resistance for elastic rough electrode surface contact including frictional temperature rise

An improved electrical contact resistance (ECR) model for elastic rough electrode contact is proposed, incorporating the effects of asperity interactions and temperature rise by frictional and joule heating. The analytical simulation results show that the ECR decreases steeply at the beginning of the contact between Al and Cu. However, it becomes stabilized after reaching a specific contact force. It is also found that the longer elapsed sliding contact time, the higher ECR due to the increase in electrical resistivity of electrode materials by the frictional temperature rise at the interface. The effects of surface roughness parameters on ECR are studied through the 3 2 full-factorial design-of-experiment analysis. Based on the two representative roughness parameters, i.e., root-mean-square (rms) roughness and asperity radius, their individual and coupled effects on the saturated ECR are examined. The saturated ECR increases with the rms roughness for a rough machined surface condition, but it is hardly affected by the asperity radius. On the other hand, the saturated ECR increases with both the rms roughness and the asperity radius under a smooth thin film surface condition.

42 ENGINEERING↗

Enhanced absorption in two-dimensional materials via Fano-resonant photonic crystals

The use of two-dimensional (2D) materials in optoelectronics has attracted much attention due to their fascinating optical and electrical properties. However, the low optical absorption of 2D materials arising from their atomic thickness limits the maximum attainable external quantum efficiency. For example, in the visible and near-infrared regimes monolayer MoS{sub 2} and graphene absorb only ∼10% and 2.3% of incoming light, respectively. Here, we experimentally demonstrate the use of Fano-resonant photonic crystals to significantly boost absorption in atomically thin materials. Using graphene as a test bed, we demonstrate that absorption in the monolayer thick material can be enhanced to 77% within the telecommunications band, the highest value reported to date. We also show that the absorption in the Fano-resonant structure is non-local, with light propagating up to 16 μm within the structure. This property is particularly beneficial in harvesting light from large areas in field-effect-transistor based graphene photodetectors in which separation of photo-generated carriers only occurs ∼0.2 μm adjacent to the graphene/electrode interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Macroscale and Nanoscale Photoelectrochemical Behavior of p-Type Si(111) Covered by a Single Layer of Graphene or Hexagonal Boron Nitride

Two-dimensional (2D) materials may enable a general approach to the introduction of a dipole at a semiconductor surface as well as control over other properties of the double layer at a semiconductor/liquid interface. Vastly different properties can be found in the 2D materials currently studied due in part to the range of the distribution of density-of-states. In this work, the open-circuit voltage (V oc ) of p-Si–H, p-Si/Gr (graphene), and p-Si/h-BN (hexagonal boron nitride) in contact with a series of one-electron outer-sphere redox couples was investigated by macroscale measurements as well as by scanning electrochemical cell microscopy (SECCM). The band gaps of Gr and h-BN (0–5.97 eV) encompass the wide range of band gaps for 2D materials, so these interfaces (p-Si/Gr and p-Si/h-BN) serve as useful references to understand the behavior of 2D materials more generally. The value of Voc shifted with respect to the effective potential of the contacting solution, with slopes (ΔV oc /ΔE Eff ) of -0.27 and -0.38 for p-Si/Gr and p-Si/h-BN, respectively, indicating that band bending at the p-Si/h-BN and p-Si/Gr interfaces responds at least partially to changes in the electrochemical potential of the contacting liquid electrolyte. Additionally, SECCM is shown to be an effective method to interrogate the nanoscale photoelectrochemical behavior of an interface, showing little spatial variance over scales exceeding the grain size of the CVD-grown 2D materials in this work. The measurements demonstrated that the polycrystalline nature of the 2D materials had little effect on the results and confirmed that the macroscale measurements reflected the junction behavior at the nanoscale.

2D material↗

Silicone Molding and Lifetime Testing of Peripheral Nerve Interfaces for Neuroprostheses

Implantable peripheral nerve cuffs have a large application in neuroprostheses as they can be used to restore sensation to those with upper limb amputations. Modern day prosthetics, while lessening the pain associated with phantom limb syndrome, have limited fine motor control and do not provide sensory feedback to patients. Sensory feedback with prosthetics requires communication between the nervous system and limbs, and is still a challenge to accomplish with amputees. Establishing this communication between the peripheral nerves in the arm and artificial limbs is vital as prosthetics research aims to provide sensory feedback to amputees. Peripheral nerve cuffs restore sensation by electrically stimulating certain parts of the nerve in order to create feeling in the hand. Cuff electrodes have an advantage over standard electrodes as they have high selective stimulation by bringing the electrical interface close to the neural tissue in order to selectively activate targeted regions of a peripheral nerve. In order to further improve the selective stimulation of these nerve cuffs, there is need for finer spatial resolution among electrodes. One method to achieve a higher spatial resolution is to increase the electrode density on the cuff itself. Microfabrication techniques can be used to achieve this higher electrode density. Using L-Edit, a layout editor, microfabricated peripheral nerve cuffs were designed with a higher electrode density than the current model. This increase in electrode density translates to an increase in spatial resolution by at least one order of magnitude. Microfabricated devices also have two separate components that are necessary to understand before implantation: lifetime of the device and assembly to prevent nerve damage. Silicone molding procedures were optimized so that devices do not damage nerves in vivo, and lifetime testing was performed on test microfabricated devices to determine their lifetime in vivo. Future work of this project would include fabricating some of the designed devices and seeing how they compare to the current cuffs in terms of their electrical performance, lifetime, shape, and mechanical properties.

59 BASIC BIOLOGICAL SCIENCES↗

Seamless Staircase Electrical Contact to Semiconducting Graphene Nanoribbons

Electrical contact to low-dimensional (low-D) materials is a key to their electronic applications. Traditional metal contacts to low-D semiconductors typically create gap states that can pin the Fermi level (E F ). Yet, low-D metals possessing a limited density of states at E F can enable gate-tunable work functions and contact barriers. Furthermore, a seamless contact with native bonds at the interface, without localized interfacial states, can serve as an optimal electrode. To realize such a seamless contact, one needs to develop atomically precise heterojunctions from the atom up. In this work, we demonstrate an all-carbon staircase contact to ultranarrow armchair graphene nanoribbons (aGNRs). The coherent heterostructures of width-variable aGNRs, consisting of 7, 14, 21, and up to 56 carbon atoms across the width, are synthesized by a surface-assisted self-assembly process with a single molecular precursor. The aGNRs exhibit characteristic vibrational modes in Raman spectroscopy. A combined scanning tunneling microscopy and density functional theory study reveals the native covalent-bond nature and quasi-metallic contact characteristics of the interfaces. Our electronic measurements of such seamless GNR staircase constitute a promising first step toward making low resistance contacts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Prediction of crack propagation paths in the unit cell of SOFC stacks

Planar Solid Oxide Fuel Cells (SOFC) stacks are multi-material layered systems with different thermo-mechanical properties. Due to their severe thermal loading, these layers have to meet high demands to preserve their mechanical integrity without initiation and propagation of fracture. Here, we focus on a typical unit cell of the stack which consists of positive electrode-electrolyte-negative electrode (PEN). Based on the mechanical properties of each layer and their interfaces, an energy criterion as a function of crack length is used for the prediction of possible crack extensions in the PEN. This criterion is a pure local criterion, independent of applied loads and geometry of the specimen. An analysis of the competition between crack deflections in the interfaces and crack penetration in layers is presented.

30 DIRECT ENERGY CONVERSION↗

Nonlinear surface waves on the boundary of a photorefractive crystal

Excitation of nonlinear surface waves is studied at the SBN-75 crystal - air interface. The SBN-75 crystal is characterised by the diffusion-type photorefractive nonlinearity, the surface wave being excited in the surface layer and the depth of its penetration into the crystal being determined by the nonlinear crystal parameters. Because of a large refraction coefficient in SBN-75, the penetration depth of the surface wave into the air is small; therefore, the nonlinear surface wave is localised in the surface crystal layer several micrometers in thickness. The oscillating intensity distribution of the surface wave at the output end of the crystal is measured. The oscillation period is determined by the angle of incidence of the exciting beam. The nonlinear wave is excited not only at the crystal - air interface but also in the case when the active surface of the crystal is covered by an electrode, for example, an aquadag layer. This circumstance opens up a possibility of studying new properties of the surface waves when an external electric field is applied to the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of carrier mobility in MoS{sub 2} field effect transistors by a SiO{sub 2} protective layer

Molybdenum disulfide is a promising channel material for field effect transistors (FETs). In this paper, monolayer MoS{sub 2} grown by chemical vapor deposition (CVD) was used to fabricate top-gate FETs through standard optical lithography. During the fabrication process, charged impurities and interface states are introduced, and the photoresist is not removed cleanly, which both limit the carrier mobility and the source-drain current. We apply a SiO{sub 2} protective layer, which is deposited on the surface of MoS{sub 2}, in order to avoid the MoS{sub 2} directly contacting with the photoresist and the ambient environment. Therefore, the contact property between the MoS{sub 2} and the electrodes is improved, and the Coulomb scattering caused by the charged impurities and the interface states is reduced. Comparing MoS{sub 2} FETs with and without a SiO{sub 2} protective layer, the SiO{sub 2} protective layer is found to enhance the characteristics of the MoS{sub 2} FETs, including transfer and output characteristics. A high mobility of ∼42.3 cm{sup 2}/V s is achieved, which is very large among the top-gate CVD-grown monolayer MoS{sub 2} FETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A high performance transparent resistive switching memory made from ZrO{sub 2}/AlON bilayer structure

In this study, the switching properties of an indium tin oxide (ITO)/zirconium oxide (ZrO{sub 2})/ITO single layer device and those of a device with an aluminum oxynitride (AlON) layer were investigated. The devices with highly transparent characteristics were fabricated. Compared with the ITO/ZrO{sub 2}/ITO single layer device, the ITO/ZrO{sub 2}/AlON/ITO bilayer device exhibited a larger ON/OFF ratio, higher endurance performance, and superior retention properties by using a simple two-step forming process. These substantial improvements in the resistive switching properties were attributed to the minimized influence of oxygen migration through the ITO top electrode (TE), which can be realized by forming an asymmetrical conductive filament with the weakest part at the ZrO{sub 2}/AlON interface. Therefore, in the ITO/ZrO{sub 2}/AlON/ITO bilayer device, the regions where conductive filament formation and rupture occur can be effectively moved from the TE interface to the interior of the device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗