Search NASA⌕ Search

SEARCH · Search NASA

Results for “error models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Introduction to CAUSES: Description of weather and climate models and their near-surface temperature errors in 5-day hindcasts near the Southern Great Plains

We introduce the Clouds Above the United States and Errors at the Surface (CAUSES) project with its aim of better understanding the physical processes leading to warm screen-temperature biases over the American Midwest in many numerical models. In this first of four companion papers, 11 different models, from 9 institutes, perform a series of 5-day hindcasts, each initialised from reanalyses. After describing the common experimental protocol and detailing each model configuration, a gridded temperature data set is derived from observations and used to show that all the models have a warm bias over parts of the Midwest. Additionally, a strong diurnal cycle in the screen-temperature bias is found in most models. In some models the bias is largest around midday, while in others it is largest during the night. At the Department of Energy Atmospheric Radiation Measurement Southern Great Plains (SGP) site, the model biases are shown to extend several kilometers into the atmosphere. Finally, to provide context for the companion papers, in which observations from the SGP site are used to evaluate the different processes contributing to errors there, it is shown that there are numerous locations across the Midwest where the diurnal cycle of the error is highly correlated with the diurnal cycle of the error at SGP. This suggests that conclusions drawn from detailed evaluation of models using instruments located at SGP will be representative of errors that are prevalent over a larger spatial scale.

54 ENVIRONMENTAL SCIENCES↗

Parameter uncertainties for imperfect surrogate models in the low-noise regime

Abstract Bayesian regression determines model parameters by minimizing the expected loss, an upper bound to the true generalization error. However, this loss ignores model form error, or misspecification, meaning parameter uncertainties are significantly underestimated and vanish in the large data limit. As misspecification is the main source of uncertainty for surrogate models of low-noise calculations, such as those arising in atomistic simulation, predictive uncertainties are systematically underestimated. We analyze the true generalization error of misspecified, near-deterministic surrogate models, a regime of broad relevance in science and engineering. We show that posterior parameter distributions must cover every training point to avoid a divergence in the generalization error and design a compatible ansatz which incurs minimal overhead for linear models. The approach is demonstrated on model problems before application to thousand-dimensional datasets in atomistic machine learning. Our efficient misspecification-aware scheme gives accurate prediction and bounding of test errors in terms of parameter uncertainties, allowing this important source of uncertainty to be incorporated in multi-scale computational workflows.

Swinburne, Thomas D. (ORCID:0000000232554257)↗

An Investigation of Time Distributions for Task Primitives to Support the HUNTER Dynamic Human Reliability Analysis

As an effort to support data collection for dynamic human reliability analysis (HRA), this study investigates time distributions for task primitives defined in the Goals, Operators, Methods, and Selection rules (GOMS)–Human Reliability Analysis (HRA) method. GOMS-HRA was developed to provide cognition-based time and human error probability information for dynamic HRA calculation in the Human Unimodel for Nuclear Technology to Enhance Reliability (HUNTER) framework. HUNTER is a framework to support the dynamic modelling of human error in conjunction with other modelling tools. In this paper, we investigate time distributions using experimental data collected from the Simplified Human Error Experimental Program (SHEEP) study, which suggests an HRA data collection framework to complement full-scope simulator research as well as collect input data for dynamic HRA using simplified simulators such as the Rancor Microworld Simulator. In this study, time required for GOMS-HRA task primitives to satisfy thirteen statistical distributions is investigated. Then, the time distributions from student operators and professional operators are compared and discussed. As a result, this study identified several time distributions on five GOMS-HRA task primitives at a statistically significant level. According to analyses to date, a greater number of significant time distributions was found in abnormal or emergency operating procedures rather than standard operating procedures. In the future, it is expected that the result of this study can provide objective reference on elapsed time data for task primitives as well as help to realistically simulate scenarios within dynamic HRA.

99 GENERAL AND MISCELLANEOUS↗

Material Model Parameters Optimization in Liquid Mercury Target Dynamics Simulation With Machine Learning Surrogates

A pulsed spallation target is subjected to very short (∼0.7μs) but intense loads (23.3 kJ) from repeated proton pulses, which knock away neutrons from the mercury atoms’ nuclei for a wide range application in physics, engineering, medicine, petroleum exploration, biology, chemistry, etc. The effect of this pulsed loading on the stainless-steel target module which contains the flowing mercury target material is difficult to predict not only due to its short but intense explosive-like physical reaction, but also the nonlinear material behavior of the liquid mercury in the structure. Injecting small helium bubbles in the mercury has been an efficient method of mitigating the pressure wave at high power level stage. However, prediction of the resultant loading on the target is more difficult when helium gas is intentionally injected into the mercury. A 2-phase material model that incorporates the Rayleigh-Plesset (R-P) model is expected to address this complex multi-physics dynamics problem by including the bubble dynamics in the liquid mercury. A parameter sensitivity study was firstly employed to understand their impact on the simulation strains. The investigated parameters included E, μ, γ, σ, n, VFgas, and gas cumulative volume curve control parameters a and b. Verification and validation results from sparse polynomial expansions (SPE) method and directional Gaussian smoothing (DGS) optimization show that the surrogate model had training error of ∼7% and validation error of ∼15%, indicating that machine learning methods and surrogate models can help optimize the uncertain parameters in the complex 2-phase material model. This approach is expected to fill the knowledge gap between unknown liquid-gas mixture material model and measured vessel strain responses.

Lin, Lianshan↗

The Q{sub weak} Experiment at Jefferson Lab--A Search for New Physics at the TeV Scale

The Q{sub weak} collaboration will make the first precision determination of the proton's weak charge, Q{sub W}{sup P} = 1-4 sin{sup 2} {theta}{sub w}, from a measurement of the parity-violating asymmetry in elastic electron-proton scattering at very low momentum transfer. The results will determine the proton's weak charge with a 4% total error. The Standard Model makes a firm prediction of Q{sub W}{sup P}, based on the running of the weak mixing angle, sin{sup 2} {theta}{sub w}, from the Z{sup 0} pole down to low energies, corresponding to a 10{sigma} effect in this experiment. Any significant deviation of sin{sup 2} {theta}{sub w} from the Standard Model prediction at low Q{sup 2} would be a signal of new physics, wheras agreement would place new and significant constraints on possible Standard Model extensions at the TeV mass scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Decay curve analysis for data error quantification in time-domain induced polarization imaging

In recent years, the time-domain induced polarization (TDIP) imaging technique has emerged as a suitable method for the characterization and the monitoring of hydrogeologic and biogeochemical processes. However, one of the major challenges refers to the resolution of the electrical images. Hence, various studies have stressed the importance of data processing, error characterization, and the deployment of adequate inversion schemes. A widely accepted method to assess data error in electrical imaging relies on the analysis of the discrepancy between normal and reciprocal measurements. Nevertheless, the collection of reciprocals doubles the acquisition time and is only viable for a limited subset of commonly used electrode configurations (e.g., dipole-dipole [DD]). To overcome these limitations, we have developed a new methodology to quantify the data error in TDIP imaging, which is entirely based on the analysis of the recorded IP decay curve and does not require recollection of data (e.g., reciprocals). The first two steps of the methodology assess the general characteristics of the decay curves and the spatial consistency of the measurements for the detection and removal of outliers. In the third and fourth steps, we quantify the deviation of the measured decay curves from a smooth model for the estimation of random error of the total chargeability and transfer resistance measurement. The error models and imaging results obtained from this methodology - in the following referred to as "decay curve analysis" - are compared with those obtained following a conventional normal-reciprocal analysis revealing consistent results. As a result, we determine the applicability of our methodology with real field data collected at the floodplain scale (approximately 12 ha) using multiple gradient and DD configurations.

58 GEOSCIENCES↗

Optimal PMU design based on sampling model and sensitivity analysis

The precise measurements of the synchrophasor and frequency from phasor measurement units (PMUs) are widely used in power grid applications. With the improvement of the technique, applications always require stable dynamic performance and higher accuracy for the synchrophasor and frequency measurements, which is challenging for PMU development. To evaluate the contribution of PMU hardware to measurement accuracy, this paper proposes a general-purpose sampling model to analyze the measurement error. In the proposed sampling model, a strict mathematical derivation is derived, where its error is purely determined by the parameters of the PMU hardware. The sensitivity analysis is carried out by three methods, including mathematical analysis, computer simulation, and variance-based sensitivity analysis. Through the sensitivity analysis, this paper establishes the systematic formulation and the inclusion of synchrophasor, frequency, and ROCOF. Experimental results based on the real-world testbench involving distribution-level PMUs match the mathematical analysis conclusion, which verifies the correctness of the general-purpose sampling model. Furthermore, a strategy for the optimal PMU design is proposed, which could guide PMU design in the future.

42 ENGINEERING↗

Baryon acoustic oscillation theory and modelling systematics for the DESI 2024 results

This paper provides a comprehensive overview of how fitting of baryon acoustic oscillations (BAO) is carried out within the upcoming Dark Energy Spectroscopic Instrument’s (DESI) 2024 results using its DR1 data set, and the associated systematic error budget from theory and modelling of the BAO. We derive new results showing how non-linearities in the clustering of galaxies can cause potential biases in measurements of the isotropic (⁠α iso ⁠) and anisotropic (⁠α ap ) BAO distance scales, and how these can be effectively removed with an appropriate choice of reconstruction algorithm. We then demonstrate how theory leads to a clear choice for how to model the BAO and develop, implement, and validate a new model for the remaining smooth-broad-band (i.e. without BAO) component of the galaxy clustering. Finally, we explore the impact of all remaining modelling choices on the BAO constraints from DESI using a suite of high-precision simulations, arriving at a set of best practices for DESI BAO fits, and an associated theory and modelling systematic error. Overall, our results demonstrate the remarkable robustness of the BAO to all our modelling choices and motivate a combined theory and modelling systematic error contribution to the post-reconstruction DESI BAO measurements of no more than 0.1 per cent (0.2 per cent) for its isotropic (anisotropic) distance measurements. We expect the theory and best practices laid out to here to be applicable to other BAO experiments in the era of DESI and beyond.

79 ASTRONOMY AND ASTROPHYSICS↗

A flexible method to calculate the distributions of discretization errors in operator-split codes with stochastic noise in problem data

This report investigates a technique to calculate the distributions of discretization errors for a model of advection-diffusion-reaction with stochastic noise in problem data. The focus is on operator-split discretization methods. The error is decomposed into components due to the splitting and due to the discretization within each component. We present a method to estimate the distributions of the total discretization error for a quantity of interest as well as the aforementioned error components. These computations require information about the propagation of uncertainty within and between code modules, for which purpose we use a flexible code framework for uncertainty quantification. Computational examples illustrate that in certain cases the distribution of numerical error can have a significant impact on the code output. Using information about the components of the numerical error, decisions can be made regarding discretization parameters to efficiently reduce the impact of numerical error on the distribution of model outputs.

97 MATHEMATICS AND COMPUTING↗

DISCOVERY OF A HIGHLY UNEQUAL-MASS BINARY T DWARF WITH KECK LASER GUIDE STAR ADAPTIVE OPTICS: A COEVALITY TEST OF SUBSTELLAR THEORETICAL MODELS AND EFFECTIVE TEMPERATURES

Highly unequal-mass ratio binaries are rare among field brown dwarfs, with the mass ratio distribution of the known census described by q {sup (4.9{+-}0.7)}. However, such systems enable a unique test of the joint accuracy of evolutionary and atmospheric models, under the constraint of coevality for the individual components (the 'isochrone test'). We carry out this test using two of the most extreme field substellar binaries currently known, the T1 + T6 {epsilon} Ind Bab binary and a newly discovered 0.''14 T2.0 + T7.5 binary, 2MASS J12095613-1004008AB, identified with Keck laser guide star adaptive optics. The latter is the most extreme tight binary resolved to date (q {approx} 0.5). Based on the locations of the binary components on the Hertzsprung-Russell (H-R) diagram, current models successfully indicate that these two systems are coeval, with internal age differences of log(age) = -0.8 {+-} 1.3(-1.0{sup +1.2}{sub -1.3}) dex and 0.5{sup +0.4}{sub -0.3}(0.3{sup +0.3}{sub -0.4}) dex for 2MASS J1209-1004AB and {epsilon} Ind Bab, respectively, as inferred from the Lyon (Tucson) models. However, the total mass of {epsilon} Ind Bab derived from the H-R diagram ({approx} 80 M{sub Jup} using the Lyon models) is strongly discrepant with the reported dynamical mass. This problem, which is independent of the assumed age of the {epsilon} Ind Bab system, can be explained by a {approx} 50-100 K systematic error in the model atmosphere fitting, indicating slightly warmer temperatures for both components; bringing the mass determinations from the H-R diagram and the visual orbit into consistency leads to an inferred age of {approx} 6 Gyr for {epsilon} Ind Bab, older than previously assumed. Overall, the two T dwarf binaries studied here, along with recent results from T dwarfs in age and mass benchmark systems, yield evidence for small ({approx}100 K) errors in the evolutionary models and/or model atmospheres, but not significantly larger. Future parallax, resolved spectroscopy, and dynamical mass measurements for 2MASS J1209-1004AB will enable a more stringent application of the isochrone test. Finally, the binary nature of this object reduces its utility as the primary T3 near-IR spectral typing standard; we suggest SDSS J1206+2813 as a replacement.

79 ASTRONOMY AND ASTROPHYSICS↗

Hydrologic investigations of radar-rainfall error propagation to rainfall-runoff model hydrographs

Rainfall is arguably the most important yet most variable input for rainfall-runoff hydrologic models. In this study, the authors search for the characteristics of radar-rainfall estimates that are most important for skillful streamflow predictions. They perform comprehensive hydrologic investigations of radar-rainfall characteristics, including spatiotemporal resolution, radar range visibility, statistical characterization of rainfall variability, all vis-a-vis basin characteristics such as size and river network topology. Since the true rainfall fields are unknown, the authors exploit a paradigm of using two independently constructed radar-rainfall products i.e., Multi-Radar Multi-Sensor and IFC-ZR used operationally by the Iowa Flood Center (IFC). Using the distributed hydrologic model called the Hillslope-Link Model for the domain of the state of Iowa, they evaluate streamflow prediction at 140 USGS gauge stations that monitor rivers in Iowa. Through spatial and temporal rainfall aggregation experiments, the authors show that the impact of spatial and temporal resolution of rainfall is significant typically for smaller basins while starts reducing significantly for basins larger than 1,000 km 2 . Other rainfall characteristics they explored do not reveal a strong signature in the relationship of rainfall differences between the two products and hydrograph errors. However, exploring the product similarities rather than differences reveals that the basin-wide rainfall volume has the most significant effect on streamflow prediction. The results from this study are generalizable for all rainfall observing systems.

54 ENVIRONMENTAL SCIENCES↗

Multi-area parameter error identification for large power systems

Power grid model parameters may contain errors due to various reasons. Detecting and correcting parameter errors typically requires significant computational effort due to the size and complexity of the parameter database. While the normalized Lagrange multiplier (NLM) method can effectively detect, identify and correct parameter errors, its computational burden could rapidly grow with increasing system size. This paper addresses this issue by proposing a multi-area parameter error identification method. Each area has its own outlier detection tool for detecting the incorrect parameters and measurements within the area. On the other hand, due to the reduced redundancy at area boundaries, parameter errors on branches incident to boundary buses may not be detected. Such errors are subsequently detected by a coordination level estimator completing the system-wide parameter detection procedure. In conclusion, performance of the developed method is demonstrated using the IEEE 118-bus and 2000-bus Texas synthetic systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mathematical modelling for the drying method and smoothing drying rate using cubic spline for seaweed Kappaphycus Striatum variety Durian in a solar dryer

The solar drying experiment of seaweed using Green V-Roof Hybrid Solar Drier (GVRHSD) was conducted in Semporna, Sabah under the metrological condition in Malaysia. Drying of sample seaweed in GVRHSD reduced the moisture content from about 93.4% to 8.2% in 4 days at average solar radiation of about 600W/m{sup 2} and mass flow rate about 0.5 kg/s. Generally the plots of drying rate need more smoothing compared moisture content data. Special cares is needed at low drying rates and moisture contents. It is shown the cubic spline (CS) have been found to be effective for moisture-time curves. The idea of this method consists of an approximation of data by a CS regression having first and second derivatives. The analytical differentiation of the spline regression permits the determination of instantaneous rate. The method of minimization of the functional of average risk was used successfully to solve the problem. This method permits to obtain the instantaneous rate to be obtained directly from the experimental data. The drying kinetics was fitted with six published exponential thin layer drying models. The models were fitted using the coefficient of determination (R{sup 2}), and root mean square error (RMSE). The modeling of models using raw data tested with the possible of exponential drying method. The result showed that the model from Two Term was found to be the best models describe the drying behavior. Besides that, the drying rate smoothed using CS shows to be effective method for moisture-time curves good estimators as well as for the missing moisture content data of seaweed Kappaphycus Striatum Variety Durian in Solar Dryer under the condition tested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An error reduction algorithm to improve lidar turbulence estimates for wind energy

Abstract. Remote-sensing devices such as lidars are currently being investigated as alternatives to cup anemometers on meteorological towers for the measurement of wind speed and direction. Although lidars can measure mean wind speeds at heights spanning an entire turbine rotor disk and can be easily moved from one location to another, they measure different values of turbulence than an instrument on a tower. Current methods for improving lidar turbulence estimates include the use of analytical turbulence models and expensive scanning lidars. While these methods provide accurate results in a research setting, they cannot be easily applied to smaller, vertically profiling lidars in locations where high-resolution sonic anemometer data are not available. Thus, there is clearly a need for a turbulence error reduction model that is simpler and more easily applicable to lidars that are used in the wind energy industry. In this work, a new turbulence error reduction algorithm for lidars is described. The Lidar Turbulence Error Reduction Algorithm, L-TERRA, can be applied using only data from a stand-alone vertically profiling lidar and requires minimal training with meteorological tower data. The basis of L-TERRA is a series of physics-based corrections that are applied to the lidar data to mitigate errors from instrument noise, volume averaging, and variance contamination. These corrections are applied in conjunction with a trained machine-learning model to improve turbulence estimates from a vertically profiling WINDCUBE v2 lidar. The lessons learned from creating the L-TERRA model for a WINDCUBE v2 lidar can also be applied to other lidar devices. L-TERRA was tested on data from two sites in the Southern Plains region of the United States. The physics-based corrections in L-TERRA brought regression line slopes much closer to 1 at both sites and significantly reduced the sensitivity of lidar turbulence errors to atmospheric stability. The accuracy of machine-learning methods in L-TERRA was highly dependent on the input variables and training dataset used, suggesting that machine learning may not be the best technique for reducing lidar turbulence intensity (TI) error. Future work will include the use of a lidar simulator to better understand how different factors affect lidar turbulence error and to determine how these errors can be reduced using information from a stand-alone lidar.

17 WIND ENERGY↗

Constitutive Modeling for Predicting High-Temperature Flow Behavior in Aluminum 5083+10 Wt Pct SiC{sub p} Composite

A constitutive model capable of predicting material flow behavior with high precision is essential for optimizing secondary processing parameters through simulation techniques. In this study, the hot deformation behavior of aluminum 5083+10 wt pct SiC particulate composite was predicted using constitutive equations based on the modified Johnson–Cook (JC), modified Zerilli–Armstrong (ZA), and strain-compensated Arrhenius models. The models were established on the basis of the true stress–strain values obtained from an isothermal hot compression test conducted on the INSTRON 8801 universal tensile testing machine under a temperature range of 473 K to 773 K and strain rate of 0.01 to 10 s{sup −1}. The prediction ability of the modified models was compared by calculating the correlation coefficient (R), average absolute relative error, and relative error. All the models could precisely predict the hot flow behavior of the composite. The modified ZA model had the highest accuracy. The JC model required the least number of material constants and had the lowest calculation time, followed by the modified ZA and strain-compensated Arrhenius models.

36 MATERIALS SCIENCE↗

Investigating the dependence of SCM simulated precipitation and clouds on the spatial scale of large-scale forcing at SGP [Investigating the scale dependence of SCM simulated precipitation and cloud by using gridded forcing data at SGP]

Large-scale forcing data, such as vertical velocity and advective tendencies, are required to drive single-column models (SCMs), cloud-resolving models, and large-eddy simulations. Previous studies suggest that some errors of these model simulations could be attributed to the lack of spatial variability in the specified domain-mean large-scale forcing. This study investigates the spatial variability of the forcing and explores its impact on SCM simulated precipitation and clouds. A gridded large-scale forcing data during the March 2000 Cloud Intensive Operational Period at the Atmospheric Radiation Measurement program's Southern Great Plains site is used for analysis and to drive the single-column version of the Community Atmospheric Model Version 5 (SCAM5). When the gridded forcing data show large spatial variability, such as during a frontal passage, SCAM5 with the domain-mean forcing is not able to capture the convective systems that are partly located in the domain or that only occupy part of the domain. This problem has been largely reduced by using the gridded forcing data, which allows running SCAM5 in each subcolumn and then averaging the results within the domain. This is because the subcolumns have a better chance to capture the timing of the frontal propagation and the small-scale systems. As a result, other potential uses of the gridded forcing data, such as understanding and testing scale-aware parameterizations, are also discussed.

58 GEOSCIENCES↗

Improving Energy Use Forecast for Campus Micro-grids using Indirect Indicators

The rising global demand for energy is best addressed by adopting and promoting sustainable methods of power consumption. We employ an informatics approach towards forecasting the energy consumption patterns in a university campus micro-grid which can be used for energy use planning and conservation. We use novel indirect indicators of energy that are commonly available to train regression tree models that can predict campus and building energy use for coarse (daily) and fine (15-min) time intervals, utilizing 3 years of sensor data collected at 15min intervals from 170 smart power meters. We analyze the impact of individual features used in the models to identify the ones best suited for the application. Our models show a high degree of accuracy with CV-RMSE errors ranging from 7.45% to 19.32%, and a reduction in error from baseline models by up to 53%.

energy forecast models↗

D-Factor: A Quantitative Model of Application Slow-Down in Multi-Resource Shared Systems

Scheduling multiple jobs onto a platform enhances system utilization by sharing resources. The benefits from higher resource utilization include reduced cost to construct, operate, and maintain a system, which often include energy consumption. Maximizing these benefits comes at a price - resource contention among jobs increases job completion time. In this paper, we analyze slow-downs of jobs due to contention for multiple resources in a system; referred to as dilation factor. We observe that multiple-resource contention creates non-linear dilation factors of jobs. From this observation, we establish a general quantitative model for dilation factors of jobs in multi-resource systems. A job is characterized by a vector-valued loading statistics and dilation factors of a job set are given by a quadratic function of their loading vectors. We demonstrate how to systematically characterize a job, maintain the data structure to calculate the dilation factor (loading matrix), and calculate the dilation factor of each job. We validate the accuracy of the model with multiple processes running on a native Linux server, virtualized servers, and with multiple MapReduce workloads co-scheduled in a cluster. Evaluation with measured data shows that the D-factor model has an error margin of less than 16%. We also show that the model can be integrated with an existing on-line scheduler to minimize the makespan of workloads.

99 GENERAL AND MISCELLANEOUS↗