Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Pd-promoted reduction and restructuring of an In 2 O 3 -based catalyst for CO 2 hydrogenation at room temperature

An unconventional reaction mechanism in an In 2 O 3 /Pd(1 1 1) inverse model catalyst for the CO 2 hydrogenation reaction has been uncovered: In 2 O 3 is partially reduced at room temperature in a reaction atmosphere as a result of its direct contact with Pd(1 1 1), which is an efficient H 2 splitter. The reduction induces changes in surface free energy, leading to a dynamical restructuring at the In 2 O 3 /Pd(1 1 1) interface via formation of InO x and outward diffusion of Pd, as revealed by ambient pressure X-ray photoelectron spectroscopy, X-ray absorption spectroscopy and density functional theory simulations. This dynamical restructuring eventually promotes the growth of 2D InPd y O x nanodomains as the catalytically active phase and the exclusive formation of methanol upon hydrogenation of CO 2 at room temperature. A comparable high selectivity toward CH 3 OH was found in more realistic bulk catalytic systems (2 wt% Pd/In 2 O 3 catalyst and commercial CZA catalyst). Scanning tunneling microscopy under ultrahigh vacuum and ambient pressure reaction atmospheres further reveals the structural dynamics at the InO x /Pd(1 1 1) interface, where we follow in situ the evolution of the InO x particles on Pd(1 1 1) and the mobility of the InPd y O x nanodomains in a CO 2 + H 2 environment. The present findings of the formation of a mixed oxide phase in a dynamically restructuring metal/reducible-oxide interface indicate further implications for other heterogeneous catalytic systems beyond the present CO 2 hydrogenation example and highlight the importance of in situ investigations.

36 MATERIALS SCIENCE↗

Scanning electrochemical microscopy of graphene/polymer hybrid thin films as supercapacitors: Physical-chemical interfacial processes

Hybrid electrode comprising an electric double-layer capacitor of graphene nanosheets and a pseudocapacitor of the electrically conducting polymers namely, polyaniline; PAni and polypyrrole; PPy are constructed that exhibited synergistic effect with excellent electrochemical performance as thin film supercapacitors for alternative energy. The hybrid supercapacitors were prepared by layer-by-layer (LbL) assembly based on controlled electrochemical polymerization followed by reduction of graphene oxide electrochemically producing ErGO, for establishing intimate electronic contact through nanoscale architecture and chemical stability, producing a single bilayer of (PAni/ErGO){sub 1}, (PPy/ErGO){sub 1}, (PAni/GO){sub 1} and (PPy/GO){sub 1}. The rationale design is to create thin films that possess interconnected graphene nanosheets (GNS) with polymer nanostructures forming well-defined tailored interfaces allowing sufficient surface adsorption and faster ion transport due to short diffusion distances. We investigated their electrochemical properties and performance in terms of gravimetric specific capacitance, C{sub s}, from cyclic voltammograms. The LbL-assembled bilayer films exhibited an excellent C{sub s} of ≥350 F g{sup −1} as compared with constituents (∼70 F g{sup −1}) at discharge current density of 0.3 A g{sup −1} that outperformed many other hybrid supercapacitors. To gain deeper insights into the physical-chemical interfacial processes occurring at the electrode/electrolyte interface that govern their operation, we have used scanning electrochemical microscopy (SECM) technique in feedback and probe approach modes. We present our findings from viewpoint of reinforcing the role played by heterogeneous electrode surface composed of nanoscale graphene sheets (conducting) and conducting polymers (semiconducting) backbone with ordered polymer chains via higher/lower probe current distribution maps. Also targeted is SECM imaging that allowed to determine electrochemical (re)activity of surface ion adsorption sites density at solid/liquid interface.

36 MATERIALS SCIENCE↗

Improved analytic modeling of the linear Rayleigh–Taylor instability with plasma transport

The Rayleigh–Taylor (R–T) instability with transport effects has long been studied analytically in the neutral fluid regime. How this picture may differ in plasmas has been given less consideration, however. Leveraging previous numerical simulations with plasma viscosity and diffusion of R–T at a binary plasma interface, we show how plasma transport and kinetic effects alter the linear R–T dispersion relation. Our insight informs a much improved analytical dispersion relation, which better matches the simulation data than previously established models. Additionally, we demonstrate the importance of employing asymptotically correct viscosity coefficients in fluid codes for accurately capturing plasma R–T growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffusion Behavior of Mn and Si Between Liquid Oxide Inclusions and Solid Iron-Based Alloy at 1473 K

In order to clarify the changes in the composition of oxide inclusions in steel, the effect of the metal and oxide composition on the reaction between solid Fe-based alloys and liquid multi-component oxides was investigated using the diffusion couple method at 1473 K. The measured concentration gradients of Mn and Si in the metal indicated that Mn diffused into the metal from the oxide, while the diffusion of Si occurred in the opposite direction. In addition, the MnO content in the oxide decreased with heat treatment time, while the SiO{sub 2} content increased. The compositional changes in both phases indicated that the Mn content in the metal near the interface increased with heat treatment with decreasing MnO content in the oxide. Assuming local equilibrium at the interface, the calculated [Mn]{sup 2}/[Si] ratio at the interface in equilibrium with the oxide increased with increases in the MnO/SiO{sub 2} ratio in the oxide. The difference in the [Mn]{sup 2}/[Si] ratios between the interface and the metal matrix increased, which caused the diffusion of Mn and Si between the multi-component oxide and metal. By measuring the diffusion lengths of Mn and Si in the metal, the chemical diffusion coefficients of Mn and Si were obtained to calculate the composition changes in Mn and Si in the metal. The calculated changes in Mn and Si in the metal agreed with the experimental results.

36 MATERIALS SCIENCE↗

Molecular dynamics study of two-dimensional sum frequency generation spectra at vapor/water interface

Two-dimensional heterodyne-detected vibrational sum frequency generation (2D HD-VSFG) spectra at vapor/water interface were studied by molecular dynamics (MD) simulation with a classical flexible and nonpolarizable model. The present model well describes the spectral diffusion of 2D infrared spectrum of bulk water as well as 2D HD-VSFG at the interface. The effect of isotopic dilution on the 2D HD-VSFG was elucidated by comparing the normal (H{sub 2}O) water and HOD water. We further performed decomposition analysis of 2D HD-VSFG into the hydrogen-bonding and the dangling (or free) OH vibrations, and thereby disentangled the different spectral responses and spectral diffusion in the 2D HD-VSFG. The present MD simulation demonstrated the role of anharmonic coupling between these modes on the cross peak in the 2D HD-VSFG spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion behaviors between Fe and Pd-containing metallic fuel

Historical interest in metallic fuel, including U-Zr and U-Pu-Zr, is due to the high thermal conductivity, high burnup capability, high fissile atom density, and good compatibility with the coolant in sodium-cooled fast reactor conditions. The notable fuel application issue is the fuel-cladding chemical interaction (FCCI). The major cause of FCCI is the lanthanide fission products that migrate to the fuel periphery and deposit on the fuel cladding. Chemical interactions between the lanthanides and cladding will result in a cladding breach. Thus additives were sought that would immobilize the lanthanides by forming stable additive-lanthanide compounds. Palladium (Pd) is being explored as a potential additive. The microstructure of metallic fuels, including U-Zr and U-Pu-Zr, with Pd addition have been characterized. The post-irradiation examination on the U-13Zr-4Pd wt% alloy has found a pronounced effect of Pd on the fuel-cladding interface. The current study performed preliminary tests of diffusion couple and microstructure analysis, in order to investigate the chemical interactions between cladding and fuel with Pd addition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interdiffusion between Zr Diffusion Barrier and U-Mo Alloy

U-Mo alloys are being developed as low enrichment uranium fuels under the Reduced Enrichment for Research and Test Reactor (RERTR) program. Significant reactions have been observed between U-Mo fuels and Al or Al alloy matrix. Refractory metal Zr has been proposed as barrier material to reduce the interactions. In order to investigate the compatibility and barrier effects between U-Mo alloy and Zr, solid-to-solid U-10wt.%Mo vs. Zr diffusion couples were assembled and annealed at 600, 700, 800, 900 and 1000 °C for various times. The microstructures and concentration profiles due to interdiffusion and reactions were examined via scanning electron microscopy and electron probe microanalysis, respectively. Intermetallic phase Mo2Zr was found at the interface and its population increased when annealing temperature decreased. Diffusion paths were also plotted on the U-Mo-Zr ternary phase diagrams with good consistency. The growth rate of interdiffusion zone between U-10wt.%Mo and Zr was also calculated under the assumption of parabolic diffusion, and was determined to be about 103 times lower than the growth rate of diffusional interaction layer found in diffusion couples U-10wt.%Mo vs. Al or Al-Si alloy. Other desirable physical properties of Zr as barrier material, such as neutron adsorption rate, melting point and thermal conductivity are presented as supplementary information to demonstrate the great potential of Zr as the diffusion barrier for U-Mo fuel systems in RERTR.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The synergistic role of Mn and Zr/Ti in producing θ'/L12 co-precipitates in Al-Cu alloys

Microstructural stability is a critical factor to consider when designing new alloys for high-temperature applications. An Al-Cu alloy with Mn and Zr additions has recently been developed to withstand extended exposures of up to 350 °C. The addition of Mn in combination with Zr and their segregation to precipitate interfaces play a significant role in stabilizing the metastable θ ' precipitates responsible for the alloy's hardness; however, adding Zr and Mn separately only improves the stability to 200 °C and 300 °C, respectively. To this end, the effect of the synergistic additions on interfacial structure and chemistry was studied in detail using atom probe tomography (APT) and scanning transmission electron microscopy (STEM) for Al-Cu-Mn-Zr/Ti-containing alloys subjected to long-term annealing (up to 2,100 h) in the critical temperature range, 300 °C and 350 °C, to investigate the role of Zr/Ti in increasing the θ '-precipitate stability. The APT and STEM results reveal that Mn additions stabilize θ ' long enough for the slower diffusing Zr atoms to segregate to coherent θ ' interfaces that eventually create a θ '/ L1 2 -Al 3 (Zr x ,Ti 1-x ) co-precipitate structure. The co-precipitate is highly stable, as shown by density functional theory calculations, and is a key factor that governs microstructural stability beyond 300 °C. This study reveals how solute additions with different stabilization mechanisms can work in concert to stabilize a desired microstructure, and the results provide insights that can be applied to other high-temperature alloy systems.

36 MATERIALS SCIENCE↗

Automated Analysis, Reporting, and Archiving for Robotic Nondestructive Assay of Holdup Deposits - 19508

To decommission deactivated gaseous diffusion enrichment facilities, miles of contaminated pipe must be measured. The current method requires thousands of manual measurements, repeated manual data transcription, and months of manual analysis. The Pipe Crawling Activity Measurement System (PCAMS), developed by Carnegie Mellon University and in commissioning for use at the DOE Portsmouth Gaseous Diffusion Enrichment Facility, uses a robot to measure Uranium-235 from inside pipes and automatically log the data. Radiation measurements, as well as imagery, geometric modeling, and precise measurement positioning data are digitally transferred to the PCAMS server. On the server, data can be automatically processed in minutes and summarized for analyst review. Measurement reports are auto-generated with the push of a button. A database specially-configured to hold heterogeneous data such as spectra, images, and robot trajectories serves as archive. This paper outlines the features and design of the PCAMS Post-Processing Software, currently in commissioning for use at the Portsmouth Gaseous Diffusion Enrichment Facility. The analysis process, the analyst interface to the system, and the content of auto-generated reports are each described. Example pipe-interior geometric surface models, illustration of how key report features apply in operational runs, and user feedback are discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tailoring the interfacial microstructure and mechanical strength of SiC ceramic joints using joining temperature and interlayer thickness

Highlights: • Bonding temperature could be decreased from 1600 °C to 1300 °C by inserting the Ti foil between SiC and Ta-5W. • The initial thickness interlayer and the number of interlayer had a significant influence on interface bonding. • Layered reaction layers consisting of carbides and silicide formed at the SiC/Ti/Ta-5W interfaces. • The joint strength depended mainly on the reaction layer thickness, especially the thickness of silicide layer. - Abstract: Silicon carbide ceramic joints solid state diffusion bonded by spark plasma sintering with Ti/Ta-5W/Ti multi-interlayer in the temperature range from 1250 °C to 1500 °C were investigated in detail in terms of interfacial microstructure, elemental diffusion, phase constituents, shear strength, and fracture morphology. Layered reaction layers consisting of carbides (TiC, Ti{sub 3}SiC{sub 2}, (Ta,Ti,W)C), silicide ((Ta,Ti,W){sub 5}Si{sub 3}) and Ta-rich solid solution (Ta,Ti,W) formed at the SiC/Ti/Ta-5W interfaces. It was found that joining temperature could be decreased from 1600 °C to 1300 °C by inserting the Ti foil between SiC and Ta-5W. Nevertheless, an attempt to further decrease the joining temperature to 1250 °C failed even using a thin Ti foil. The initial thickness interlayer and the number of interlayer had an influence on the interfacial diffusion bonding at SiC/Ti interface. Higher joining temperature was needed to achieve a tough interface joining for a thick interlayer compared with a thin interlayer. The increase of interlayer number also required higher joining temperature. The shear strength reached 123.5 ± 25.3 MPa for the joint diffusion bonded at 1300 °C.

36 MATERIALS SCIENCE↗

A Guideline to Mitigate Interfacial Degradation Processes in Solid‐State Batteries Caused by Cross Diffusion

Abstract Diffusion of transition metals across the cathode–electrolyte interface is identified as a key challenge for the practical realization of solid‐state batteries. This is related to the formation of highly resistive interphases impeding the charge transport across the materials. Herein, the hypothesis that formation of interphases is associated with the incorporation of Co into the Li 7 La 3 Zr 2 O 12 lattice representing the starting point of a cascade of degradation processes is investigated. It is shown that Co incorporates into the garnet structure preferably four‐fold coordinated as Co 2+ or Co 3+ depending on oxygen fugacity. The solubility limit of Co is determined to be around 0.16 per formula unit, whereby concentrations beyond this limit causes a cubic‐to‐tetragonal phase transition. Moreover, the temperature‐dependent Co diffusion coefficient is determined, for example, D 700 °C = 9.46 × 10 −14 cm 2 s −1 and an activation energy E a = 1.65 eV, suggesting that detrimental cross diffusion will take place at any relevant process condition. Additionally, the optimal protective Al 2 O 3 coating thickness for relevant temperatures is studied, which allows to create a process diagram to mitigate any degradation with a minimum compromise on electrochemical performance. This study provides a tool to optimize processing conditions toward developing high energy density solid‐state batteries.

Chemistry↗

Probing Exciton Diffusion and Dissociation in Single-Walled Carbon Nanotube-C60 Heterojunctions

The efficiency of thin-film organic photovoltaic (OPV) devices relies heavily upon the transport of excitons to type-II heterojunction interfaces, where there is sufficient driving force for exciton dissociation and ultimately the formation of charge carriers. Semiconducting single-walled carbon nanotubes (SWCNTs) are strong near-infrared absorbers that form type-II heterojunctions with fullerenes such as C60. Although the efficiencies of SWCNT-fullerene OPV devices have climbed over the past few years, questions remain regarding the fundamental factors that currently limit their performance. In this study, we determine the exciton diffusion length in the C60 layer of SWCNT-C60 bilayer active layers using femtosecond transient absorption measurements. We demonstrate that hole transfer from photoexcited C60 molecules to SWCNTs can be tracked by the growth of narrow spectroscopic signatures of holes in the SWCNT 'reporter layer'. In bilayers with thick C60 layers, the SWCNT charge-related signatures display a slow rise over hundreds of picoseconds, reflecting exciton diffusion through the C60 layer to the interface. A model based on exciton diffusion with a Beer-Lambert excitation profile, as well as Monte Carlo simulations, gives the best fit to the data as a function of C60 layer thickness using an exciton diffusion length of approximately 5 nm.

14 SOLAR ENERGY↗

Elements distribution and deformation features of a 4.5% Re nickel-based single crystal superalloy during creep at high temperature

Highlights: • Atom probe is used to investigate the element concentration changes in γ and γ' phase during creep. • Mo, W and Re diffuse from γ' to γ phase and enrich in γ/γ' interface during high temperature creep. • Super-dislocations in γ' phase may cross-slip from {111} to {100} plane due to the elements diffusions. • Dislocations shearing into γ' phase may decompose into K-W locks plus APB due to the refractory elements enrichment. - Abstract: By means of creep property measurement, microstructure observation and atom probe tomography, the elements distribution and deformation features of a 4.5% Re nickel-based single crystal superalloy during creep are investigated. Results show that after fully heat treated, the elements Al and Ta are mainly distributed in γ′ phase of alloy. After the alloy is crept up to fracture at 1100 °C/137 MPa, the change of the elements distributing in γ and γ′ phases occurs, wherein, the concentration decrement of the elements Al and Cr in γ′ and γ phases is attributed to their oxidation which may consume the ones. Moreover, some of the atoms Re, W and Mo dissolving in γ′ phase are repelled into γ matrix to reduce its internal energy. And the peak concentration of the atoms Re and W appears in the γ phase near the transition region, the atoms Re, W in the peak region cause the lattice distortion to increase the resistance of dislocations motion, which may improve the creep resistance of alloy. In the later stage of creep, dislocations shearing into the rafted γ′ phase may cross-slip from {111} to {100} plane to form the configuration of K-W locks, which may restrain the slipping of dislocations to improve the creep resistance of alloy. Wherein, the atom Re with lower diffusion coefficient may delay the dislocations in K-W locks for slipping and cross-slipping, which is thought to be the main reason of the K-W locks keeping in 4.5%Re alloy during creep at 1100 °C.

36 MATERIALS SCIENCE↗

Cr incorporated phase transformation in Y 2 O 3 under ion irradiation

Under irradiation, chemical species can redistribute in ways not expected from equilibrium behavior. In oxide-dispersed ferritic alloys, the phenomenon of irradiation-induced Cr redistribution at the metal/oxide interfaces has drawn recent attention. Here, the thermal and irradiation stability of the FeCr/Y 2 O 3 interface has been systematically studied. Trilayer thin films of 90 nm Fe - 20 at.% Cr (1 st layer)/100 nm Y 2 O 3 (2 nd layer)/135 nm Fe - 20 at.% Cr (3 rd layer) were deposited on MgO substrates at 500 °C. After irradiation, Cr diffuses towards and enriches the FeCr/Y 2 O 3 interface. Further, correlated with Cr redistributed into the oxide, an amorphous layer is generated at the interface. In the Y 2 O 3 layer, the original cubic phase is observed to transform to the monoclinic phase after irradiation. Meanwhile, nanosized voids, with relatively larger size at interfaces, are also observed in the oxide layer. First-principles calculations reveal that Cr substitution of Y interstitials in Y 2 O 3 containing excess Y interstitials is favored and the irradiation-induced monoclinic phase enhances this process. Lastly, our findings provide new insights that may aid in the development of irradiation resistant oxide-dispersed ferritic alloys.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

SAM Code Enhancements for Fission Product Tracking of Noble Gases and Metals in MSRs

This report documents fiscal year 2026 enhancements to the System Analysis Module (SAM) for modeling fission product transport in liquid-fueled molten salt reactors (MSRs). The work advances three principal areas: noble gas transport, noble metal deposition, and user interface improvements. The noble gas transport capability integrates drift-flux gas transport, Henry’s law two-film interphase mass transfer with pressure-based nucleation suppression, Knudsen-regime pore diffusion into porous graphite with a conjugate salt-graphite interface constraint, built-in material properties, five Sherwood-number mass transfer correlations including three derived from high-fidelity NekRS simulations, and xenon-135 reactivity feedback through SAM’s point-kinetics model. This work also presents a comprehensive verification test suite, including new analytically verified cases for pressure-dependent onset of interphase gas transfer in a stagnant vertical pipe, a postulated FLiBe-graphite Xe extraction permeator, a gravity riser with a fission-product source, and a descending pipe with gas redissolution driven by hydrostatic pressure. A machine learning framework for bubble rise velocity prediction in molten salt systems is developed and benchmarked on molten-salt and diverse aqueous bubble datasets. The best-performing fine-tuned transfer-learning networks achieve an 82% reduction in RMSE relative to the Clift correlation, and is implemented directly in SAM. The noble metal transport capability is developed, including a liquid-wall deposition model and a gas-surface flotation mechanism that transfers insoluble particles entrained by sparging gas to wetted structures. Verification tests and demonstration cases cover the surface deposition, flotation efflux, and flotation shedding. Finally, a new [SpeciesTransport] input structure replaces positional global vectors with selfcontained, order-independent, named species blocks, simplifies the specification of multiphase species and decay chains, and remains fully compatible with existing SAM input files. Together, these developments improve the physical fidelity, verification basis, and usability of SAM for system-level analyses of fissionproduct behavior in MSRs.

Mui, Travis (ORCID:0000000303736470)↗

Critical behavior of phase interfaces in porous media: Analysis of scaling properties with the use of noncoherent and coherent light

Image sequences of the surface of disordered layers of porous medium (paper) obtained under noncoherent and coherent illumination during capillary rise of a liquid are analyzed. As a result, principles that govern the critical behavior of the interface between liquid and gaseous phases during its pinning are established. By a cumulant analysis of speckle-modulated images of the surface and by the statistical analysis of binarized difference images of the surface under noncoherent illumination, it is shown that the macroscopic dynamics of the interface at the stage of pinning is mainly controlled by the power law dependence of the appearance rate of local instabilities (avalanches) of the interface on the critical parameter, whereas the growth dynamics of the local instabilities is controlled by the diffusion of a liquid in a layer and weakly depends on the critical parameter. A phenomenological model is proposed for the macroscopic dynamics of the phase interface for interpreting experimental data. The values of critical indices are determined that characterize the samples under test within this model. These values are compared with the results of numerical simulation for discrete models of directed percolation corresponding to the Kardar-Parisi-Zhang equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding

Highlights: • The magnetic pulse welding of 5× aluminum alloy with high strength steel is performed. • The microstructure evolution of welding interface under different parameters is investigated. • The intermediate layer is characterized by high-resolution transmission electron microscope and electron diffraction pattern. - Abstract: Magnetic pulse welding (MPW) is an innovative joining technology for dissimilar materials. The MPW with high joining qualities could be realized between high strength steel and 5× aluminum alloys. In this work, the MPW joints between aluminum alloy (AA 5182) sheet and high-strength low alloy steel (HC340LA) sheet were prepared under various discharge energies. The mechanical properties and microstructure observations were employed to evaluate the joint performance. Results showed that a lower discharge voltage tended to cause joints with poor quality. When the discharge energy increased, the failure position gradually changed from the weld zone to the weaker base metal (Al) during quasi-static tensile tests. In addition, the effect of discharge energies on microstructure evolution in the intermediate layer was revealed by high-resolution transmission electron microscopy (HRTEM) and scanning electron microscope (SEM). Atomic-scale diffusion was found to be the mainly welding mechanism of the Al/Fe joint. The intermetallic compound (IMC) FeAl{sub 2} and ultra-fine grains (UFG) were found in the intermediate layer under high discharge energy.

36 MATERIALS SCIENCE↗

Insights into Na + Diffusion in Silicon Modules under Operating Conditions: Measuring Low Concentrations by D-SIMS

Sodium induced shunting under an electric field is a challenging reliability issue in crystalline Si solar modules. The source of this Potential-Induced Degradation of the Shunting type (PID-s) is well understood and its influence on power loss has been intensively studied based on phenomenological models on cell or module level relating the experimental power-loss to stressing parameters (time, temperature, voltage). However, little is known about the Na ion migration kinetics, responsible for PID on a microscopic level, and its quantitative relation to the efficiency degradation. In this paper we present our investigations of sodium ion migration in Ethylene-Vinyl Acetate (EVA) and silicon through Dynamic Secondary Ion Mass Spectroscopy (D-SIMS). Each sample was annealed at field relevant temperatures from 60-90 °C to address typical migration mechanisms of common PV installations. Analysis of the SIMS migration profiles revealed a diffusivity constant D 0,EVA = 0.09 ± 0.14 cm 2 /s and an activation energy E A,EVA = 0.85 ± .04 eV for Na in EVA and diffusivities higher than extrapolated literature values in silicon (D 0,Si = (3.03 ± 2.42)x10 -5 cm 2 /s, and E A,Si = 0.98 ± 0.02 eV). The new insight will be included in a drift-diffusion based degradation model accounting for the partition coefficient across all relevant interfaces. This model can assist in predicting PID-failure in the field based on the given model stack and the diffusion of Na + through each material. Furthermore, this tool can be used for process optimization as well as material selection significantly reducing the cost and time to validate a technology.

14 SOLAR ENERGY↗