Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Silicon Foils Growth by Interface-controlled Crystallization

During interface controlled crystallization (ICC) the chance to accelerate the removal of crystallization heat is the basis for high pulling rates of about 100 mm/min. The forced heat flow from the extended crystallization front to a cooling ramp is controlled by a lubricating melt film which also influences the crystallization behavior by suppressing nucleation centers. The basic principles of this full casting technique are presented and the influences of process parameters on the morphology of prepared silicon foils are demonstrated. Three different types of crystalline structure were found in silicon foils grown to ICC technique: dendritic, coarse granular and monocrystalline with (111) 211 orientation. The criteria for their appearance of process variables are discussed.

Helmreich, D.↗
DOE OSTI2023

Rationally Engineered Vertically Aligned β ‐Ga 2− x W x O 3 Nanocomposites for Self‐Biased Solar‐Blind Ultraviolet Photodetectors with Ultrafast Response

Abstract With the astonishing advancement of present technology and increasing energy consumption, there is an ever‐increasing demand for energy‐efficient multifunctional sensors or transducers based on low‐cost, eco‐friendly material systems. In this context, self‐assembled vertically aligned β ‐Ga 2− x W x O 3 nanocomposite (GWO‐VAN) architecture‐assisted self‐biased solar‐blind UV photodetection on a silicon platform, which is the heart of traditional electronics is presented. Utilizing precisely controlled growth parameters, the formation of W‐enriched vertical β ‐Ga 2− x W x O 3 nanocolumns embedded into the W‐deficient β ‐Ga 2− x W x O 3 matrix is reached. Detailed structural and morphological analyses evidently confirm the presence of β ‐Ga 2− x W x O 3 nanocomposite with a high structural and chemical quality. Furthermore, absorption and photoluminescence spectroscopy explains photo‐absorption dynamics and the recombination through possible donor–acceptor energy states. The proposed GWO‐VAN framework facilitates evenly dispersed nanoregions with asymmetric donor energy state distribution and thus forms build‐in potential at the vertical β ‐Ga 2− x W x O 3 interfaces. As a result, the overall heterostructure evinces photovoltaic nature under the UV irradiation. A responsivity of ≈30 A/W is observed with an ultrafast response time (≈350 µs) under transient triggering conditions. Corresponding detectivity and external quantum efficiency are 7.9 × 10 12 Jones and 1.4 × 10 4 %, respectively. It is believed that, while this is the first report exploiting GWO‐VAN architecture to manifest self‐biased solar‐blind UV photodetection, the implication of the approach is enormous in designing electronics for extreme environment functionality and has immense potential to demonstrate drastic improvement in low‐cost UV photodetector technology.

Das, Debabrata↗
DOE OSTI2022

Burning questions for a warming and changing world: 15 unknowns in plant abiotic stress

Abstract We present unresolved questions in plant abiotic stress biology as posed by 15 research groups with expertise spanning eco-physiology to cell and molecular biology. Common themes of these questions include the need to better understand how plants detect water availability, temperature, salinity, and rising carbon dioxide (CO2) levels; how environmental signals interface with endogenous signaling and development (e.g. circadian clock and flowering time); and how this integrated signaling controls downstream responses (e.g. stomatal regulation, proline metabolism, and growth versus defense balance). The plasma membrane comes up frequently as a site of key signaling and transport events (e.g. mechanosensing and lipid-derived signaling, aquaporins). Adaptation to water extremes and rising CO2 affects hydraulic architecture and transpiration, as well as root and shoot growth and morphology, in ways not fully understood. Environmental adaptation involves tradeoffs that limit ecological distribution and crop resilience in the face of changing and increasingly unpredictable environments. Exploration of plant diversity within and among species can help us know which of these tradeoffs represent fundamental limits and which ones can be circumvented by bringing new trait combinations together. Better defining what constitutes beneficial stress resistance in different contexts and making connections between genes and phenotypes, and between laboratory and field observations, are overarching challenges.

Biochemistry & Molecular Biology↗
DOE OSTI2020

Preferential Stripping of a Lithium Protrusion Resulting in Recovery of a Planar Electrode

Lithium metal is a high-energy-density battery electrode material, but the largely irreversible growth of lithium protrusions on an initially planar electrode during cycling makes it unsuitable for incorporation into a commercial battery. In this study, a lithium electrode with globular protrusions was stripped electrochemically, and the local morphology of the electrode as a function of time was determined by hard X-ray tomography. We demonstrate that globules are preferentially stripped compared to a planar electrode in our system, which incorporates a nanostructured block copolymer electrolyte. We report current density at the electrode as a function of micron-scale position and time. The local current density during the electrode healing process calculated from a reference frame at the electrode/electrolyte interface provides insight into the driving forces responsible for selective stripping of the globule. These results imply the possibility of discharging protocols that may return a lithium electrode to its initial planar state.

Maslyn, Jacqueline A. (ORCID:0000000264812070)↗
NASA NTRS2002

The General Isothermal Oxidation Behavior of Cu-8Cr-4Nb

Oxidation kinetics of Cu-8Cr-4Nb was investigated by TGA (thermogravimetric) exposures between 500 and 900-C (at 25-50 C intervals) and the oxide scale morphologies examined by microscopy and micro-analysis. Because Cu-8Cr-4Nb is comprised of fine Cr2Nb precipitates in a Cu matrix, the results were interpreted by comparison with the behavior of copper (OFHC) and 'NARloy-Z' (a rival candidate material for thrust cell liner applications in advanced rocket engines) under the same conditions. While NARloy-Z and Cu exhibited identical oxidation behavior, Cu-8Cr-4Nb differed markedly in several respects: below approx. 700 C its oxidation rates were significantly lower than those of Cu; At higher temperatures its oxidation rates fell into two categories: an initial rate exceeding that of Cu, and a terminal rate comparable to that of Cu. Differences in oxide morphologies paralleled the kinetic differences at higher temperature: While NARloy-Z and Cu produced a uniform oxide scale of Cu2O inner layer and CuO outer layer, the inner (Cu2O) layer on Cu-8Cr-4Nb was stratified, with a highly porous/spongy inner stratum (responsible for the fast initial kinetics) and a dense/blocky outer stratum (corresponding to the slow terminal kinetics). Single and spinel oxides of Nb and Cr were found at the interface between the oxide scale and Cu-8Cr-4Nb substrate and it appears that these oxides were responsible for its suppressed oxidation rates at the intermediate temperatures. No difference was found between Cu-8Cr-4Nb oxidation in air and in oxygen at 1.0 atm.

Thomas-Ogbuji, L. U.↗
DOE OSTI2018

End-Of-Life Textiles as Reinforcements in Biocomposites

A number of attempts have been made to recycle cotton/polyester blend woven fabrics after use; however, most of these fabrics are disposed of in landfills. Major part of these blend fabrics are not recycled due to complexity of the fibre arrangement and cannot be separated economically. This study shows that these discarded woven fabrics could be directly used as reinforcements in composites without fibre separation. Uniform alignment in the woven fabric provided consistent properties to the composites. The fabrics were reinforced by soybean-based-bioresins to produce biocomposites. The composites were analysed for mechanical, thermal, viscoelastic and morphological properties. Porosity and wettability of the composites were also evaluated. Results demonstrate that the tensile strength and modulus of over 100 and 10 MPa, respectively, can be obtained without any fibre treatment. Furthermore, impact strength over 70 kJ/m{sup 2} was obtained without any chemical treatment on fibres. The porosity of the composites produced was less than 9 vol%. Additionally, the fabrics were treated with alkali in order to improve the fibre–matrix interface and the composite properties were studied. From the economical perspective, these composites can be produced at a low cost as the major component is available for free or low cost.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Understanding of Void Formation in Cu/Sn-Sn/Cu System During Transient Liquid Phase Bonding Process Through Diffusion Modeling

Transient Liquid Phase (TPL) bounding of Sn foil sandwiched between two Cu foils involves, in the temperature range above the melting point of Sn (232 °C) and below 350 °C, the formation and the growth of two intermetallic compounds (IMCs) Cu{sub 6}Sn{sub 5} and Cu{sub 3}Sn and mostly unintended micro-pores. The present study aims to analyze the mechanism of void development during the soldering process through an experimental and modeling approach of diffusion-controlled IMC transformation. This modeling couples the diffusion process and the interface motion with the volume shrinkage induced by the difference of partial molar volumes of atoms between each phase. We also consider two types of inter-diffusion transports: (i) inter-diffusion based on the exchange of Cu and Sn atoms and (ii) inter-diffusion of Sn atoms with vacancies allowing Kirkendall void formation. The simulations of IMC growth performed correspond to a sequence of planar phase layers, where the distinctive scallop morphology of the Cu{sub 6}Sn{sub 5} layer is described through an analytical function allowing to quantify the grain boundary diffusion pathway. We take into account of the volume diffusion mechanism for Cu{sub 3}Sn intermetallic. For Cu{sub 6}Sn{sub 5} intermetallic two mechanisms are considered, volume diffusion and grain boundary diffusion, limited by grain growth. The simulations of IMC growth kinetics, for different transport scenarios, are compared to the experimental evolving morphologies to determine the most likely mechanism of micro-void formation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding the p-doping of spiroOMeTAD by tris(pentafluorophenyl)borane

The solid-state organization of photoabsorber, hole and electron transporting layers, and interfaces between them plays an important role in governing the performance and stability of emerging optoelectronic devices such as perovskite solar cells (PSCs). The molecular organic semiconductor (OSC) 2,2' ,7,7' -tetrakis [N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (spiroOMeTAD) is a promising hole-transporting material (HTM) for PSCs, which is p-doped by molecular dopants to augment the charge carrier mobility. Here, the p-type doping of spiroOMeTAD by tris(pentafluorophenyl)borane (BCF) is investigated by a combination of techniques including optical spectroscopy, X-ray diffraction, Fourier transform infrared (FTIR), solid-state (ss)NMR, and electron paramagnetic resonance (EPR) spectroscopy. BCF molecules interact with traces of water molecules to form BCF-water complexes. Optical spectroscopy analysis suggests that the BCF/BCF-water complexes oxidize spiroOMeTAD molecules and facilitate p-type doping of spiroOMeTAD molecules. The different distributions of BCF and BCF-water molecules in doped spiroOMeTAD are characterized by FTIR and 11B NMR spectroscopy. An NMR crystallography approach which combines two-dimensional (2D) ssNMR and crystallography modeling is employed to unravel the packing interactions in spiroOMeTAD, and this analysis is extended to probe the morphological and structural changes in spiroOMeTAD:BCF blends. The hyperfine interactions are characterized by 2D hyperfine sub-level correlation (HYSCORE) spectroscopy. In this way, insight into the complex spiroOMeTAD:BCF blend morphology is obtained and compared for different dopant concentrations. Further, molecular-level analysis of doped HTMs enabled by this study has much wider relevance for further investigation, for example, chemical design and interfacial engineering of p-type doped HTMs for stable and efficient hybrid perovskite photovoltaics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Multiphasic Teeth of Chiton Articulatus , an Abrasion‐Resistant and Self‐Sharpening Tool for Hard Algae Collection

Abstract Chiton articulatus is a species of mollusk living in the tropical Pacific intertidal rocky shores of Mexico. This species feeds on solid waste organic sources, including hard crustose algae that grow on rocky substrates, by grazing on them with its radula, a flexible chitinous membrane lined with mineralized major lateral teeth. In this study, the composition, morphology, and resulting mechanics of the mature teeth of this species, which have yet to be examined, are revealed. The results show the presence of multiphasic mature teeth, each consisting of aligned hard magnetite nanoparticles on the leading edge of the tooth underneath which are magnetite lamellae, followed by goethite, lepidocrocite, and eventually hydroxyapatite near the trailing edge. This multiregional structure demonstrates a gradation in hardness as well as different microstructural features integrated with tough interfaces. The combination of these microstructural and phase arrangements results in an abrasion‐resistant tough structure with a self‐sharpening ability. The results of this work will help contribute to developing new bioinspired designs while also helping to understand the evolution and feeding habits of these intriguing invertebrates.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Solidification and Re-melting Phenomena During Slurry Preparation Using the RheoMetal™ Process

The melting sequence of the enthalpy exchange material (EEM) and formation of a slurry in the RheoMetal™ process was investigated. The EEM was extracted and quenched, together with a portion of the slurry at different processing times before complete melting. The EEM initially increased in size/diameter due to melt freezing onto its surface, forming a freeze-on layer. The initial growth of this layer was followed by a period of a constant diameter of the EEM with subsequent melting and decrease of diameter. Microstructural characterization of the size and morphology of different phases in the EEM and in the freeze-on layer was made. Dendritic equiaxed grains and eutectic regions containing Si particles and Cu-bearing particles and Fe-rich particles were observed in the as-cast EEM. The freeze-on layer consisted of dendritic aluminum tilted by about 30 deg in the upstream direction, caused by the rotation of the EEM. Energy dispersion spectroscopy analysis showed that the freeze-on layer had a composition corresponding to an alloy with higher melting point than the EEM and thus shielding the EEM from the surrounding melt. Microstructural changes in the EEM showed that temperature rapidly increased to 768 K (495 °C), indicated by incipient melting of the lowest temperature melting eutectic in triple junction grain boundary regions with Al{sub 2}Cu and Al{sub 5}Mg{sub 8}Si{sub 6}Cu{sub 2} phases present. As the EEM temperature increased further the binary Al-Si eutectic started to melt to form a region of a fully developed coherent mushy state. Experimental results and a thermal model indicated that as the dendrites spheroidized near to the interface at the EEM/freeze-on layer reached a mushy state with 25 pct solid fraction, coherency was lost and disintegration of the freeze-on layer took place. Subsequently, in the absence of the shielding effect from the freeze-on Layer, the EEM continued to disintegrate with a coherency limit of a solid fraction estimated to be 50 pct.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy

In the present paper, we present an experimentally validated 3D multiphase and multiscale solidification model to understand the transport processes involved during slurry generation with a cooling slope. In this process, superheated liquid alloy is poured at the top of the cooling slope and allowed to flow along the slope under the influence of gravity. As the melt flows down the slope, it progressively loses its superheat, starts solidifying at the melt/slope interface with formation of solid crystals, and eventually exits the slope as semisolid slurry. In the present simulation, the three phases considered are the parent melt as the primary phase, and the solid grains and air as secondary phases. The air phase forms a definable air/liquid melt interface as the free surface. After exiting the slope, the slurry fills an isothermal holding bath maintained at the slope exit temperature, which promotes further globularization of microstructure. The outcomes of the present model include prediction of volume fractions of the three different phases considered, grain evolution, grain growth, size, sphericity and distribution of solid grains, temperature field, velocity field, macrosegregation and microsegregation. In addition, the model is found to be capable of making predictions of morphological evolution of primary grains at the onset of isothermal coarsening. The results obtained from the present simulations are validated by performing quantitative image analysis of micrographs of the rapidly oil-quenched semisolid slurry samples, collected from strategic locations along the slope and from the isothermal slurry holding bath.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Study of Wave-Absorbing Coating Failure by Electrochemical Measurements

The absorption properties of wave-absorbing coatings can easily fail; therefore, a layer of corrosion-resistant topcoat is often added to the surface to increase the service life of the absorbing coating. In this study, we compare the changes in samples without or with a topcoat, namely fluorinated polyurethane, at 25 °C with a NaCl solution and at 35 °C with a neutral salt spray. Morphological characterization and composition analysis show that the topcoat can indeed greatly improve the corrosion resistance of the samples, but the absorption of the coatings still decreases in a short time. The reasons for this are indicated by electrochemical impedance spectroscopy. For the samples without a topcoat, the corrosion of the wave-absorbing coatings results in the failure of wave absorption. For the samples with a topcoat, it is likely that the state of the interface between the topcoat and absorbing coatings leads to the decline of the resistance of the wave-absorbing coatings, causing them to fail quickly.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidating the role of Cr migration in Ni-Cr exposed to molten FLiNaK via multiscale characterization

Structural materials used in nuclear reactor environments are subjected to coupled extremes such as high temperature, irradiation, and corrosion which act in concert to degrade their functional performance. Connecting alloy microstructure such as grain boundaries, and accumulating point defects with corrosion attack and pore morphology is critical to understanding underlying mechanisms. We uncover the compositional variations and morphology at multiple length scales in corrosion-damaged Ni-Cr alloy after exposure to oxidants in molten fluoride salts. A complex network of dense corrosion pores is detected by surface-level SEM observations. The corrosion pores take on a 1-dimensional morphology and are enriched with Ni and depleted of Cr 1–5 µm from the pore surface. STEM-EDS and 4D-STEM strain maps acquired simultaneously highlight the local variations in composition and structure of a ≤ 200 nm Cr-rich layer identified from a cross-section taken at the bottom of an isolated corrosion pore between the Ni-Cr alloy matrix and the embedded salt. However, the absence of an observed interface between the Ni-Cr alloy matrix and the FCC-structured Cr-rich layer suggests that Cr plating from the salt did not transpire. These findings support a proposed Cr lattice diffusion mechanism rather than Cr-precipitation from the salt to accommodate temperature transient conditions during sample cooling. Through the development of a 1D phase field model, these results are rationalized by formation energies for the Ni- and Cr-oxidation into the molten salt. This study reveals the locally altered microstructure caused by high temperature corrosion in non-steady-state molten salt nuclear reactor environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of Sulfonation Level on the Percolated Morphology and Proton Conductivity of Hydrated Fluorine-Free Copolymers: Experiments and Simulations

Using all-atom molecular dynamics simulations and a variety of experimental methods, we previously reported on a linear polyethylene with pendant phenyl sulfonated groups precisely on every fifth carbon along the backbone. With increasing relative humidity this fluorine-free polymer self-assembled to form nanoscale water channels and exhibited exceptional proton conductivity. Expanding upon those findings, here we explore partially sulfonated random copolymers, referred to as p 5PhSH-Y. Using either acetyl sulfate or sulfuric acid, a wide range of sulfonation levels were prepared ( Y = 34−98%) corresponding to ion-exchange capacities (IEC) of 2.0−4.4 mmol/g. Combining experimental techniques and all-atom molecular dynamics simulations, we study the effect of Y on water uptake, nanoscale morphology, and the proton/water transport properties of p5PhSH- Y . The proton conductivity of p 5PhSH- Y increases with relative humidity and with Y and achieves values in excess of 0.1 S/cm. These high conductivities are attributed to high IEC and welldeveloped nanoscale percolated hydrophilic domains made possible by the flexible backbone. We quantitatively describe the nature of the water channels using the characteristic distance, channel width distribution, the area per sulfonate group at the hydrophilic/ hydrophobic interface, and the fractal dimension. Notably, the channel widths and the areas per sulfonate group are nominally independent of the level of sulfonation, while depending significantly on the level of hydration. The fractal dimension of the water channels correlates strongly with the water diffusion coefficients calculated from the molecular dynamics (MD) simulations. These findings demonstrate that the p 5PhSH- Y hydrocarbon copolymers can be modified to tune properties, particularly proton conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photoinduced charge transfer in transition metal dichalcogenide heterojunctions – towards next generation energy technologies

Increasing interest in using two-dimensional transition metal dichalcogenides (2D TMDCs) in optical energy conversion technologies creates a demand for improving the yields and lifetimes of photogenerated charge carriers. Despite inherently fast photocarrier decay in neat 2D TMDCs, the unique photophysics in these quantum-confined systems motivates continued effort to control the evolution of photoexcited states and create functional devices. Here, an intriguing strategy to accomplish this goal is to employ TMDCs in heterojunctions with appropriate semiconductors, where energy level offsets drive photoinduced charge transfer (PCT) across material interfaces. PCT in TMDC-based systems can be optimized for many different applications, such as driving free carriers to photocatalytic sites for redox reactions like water splitting, extracting charge to perform work in photovoltaics or photodetectors, and manipulating the spin and momentum valley electronic degrees of freedom for quantum computing systems. Here, we review recent strides in optimizing PCT for such applications through greater fundamental understanding of the photophysics that occurs at TMDC/semiconductor interfaces. After giving an overview of isolated TMDC properties, synthetic methods, and the basics of PCT, we discuss TMDCs in heterojunctions with several classes of materials, including other TMDCs, small molecule semiconductors, polymers, single-walled carbon nanotubes, quantum dots, perovskites, and electrolytes. In addition to highlighting the unique benefits of each materials category, we also identify parallels across common themes, such as the roles of charge-transfer states, spin, electronic coupling, delocalization, interfacial atomic morphology, and the precise design of energy landscapes to direct charge and energy motion. We hope to capture a broad range of the valuable work in this fast-paced field to inspire new research directions for employing PCT in targeted TMDC-based systems.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Investigation of kinetic inductance and microwave loss in thin-film TaC x N 1−x superconducting resonators

The promise of tantalum for realizing superconducting quantum devices has generated interest in its compound films, particularly nitrides. Among these, cubic-phase tantalum carbonitride (TaC x N 1−x ) offers reduced susceptibility to oxidation and a high critical temperature, yet its microwave properties remain largely unexplored. Here, in this study, we investigate plasma-enhanced atomic layer deposition of cubic-phase TaC x N 1−x thin films for superconducting microwave circuits. Structural and transport measurements reveal nanocrystalline morphology with sub-10 nm grains and superconductivity in the dirty limit. Coplanar waveguide resonators exhibit moderately high kinetic inductance (16.8 pH/sq for 30 nm films) with potential for enhancement through dimensional scaling. The films also support high internal quality factors exceeding 10 5 at 50 mK in the single-photon regime, comparable to granular aluminum. Loss analysis identifies the two-level systems as the dominant limiting mechanism, with potential for further reduction through interface engineering. These results establish atomic layer deposited TaC x N 1−x as a promising material for scalable, low-loss, high-inductance superconducting circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1982

Convective and interfacial instabilities during solidification of succinonitrile containing ethanol

Even though slow convective flow is difficult to detect in solidifying metals, it can readily be observed in transparent materials by observing the motion of small neutrally buoyant particles. Succinonitrile, which solidifies with an unfaceted solid/liquid interface and has well characterized physical properties, is considered an excellent material for such studies. For studies of solute-induced convection, ethanol is a useful addition to succinonitrile since it has a lower density and a somewhat similar molecular structure. Samples of high purity and ethanol-doped succinonitrile are unidirectionally solidified in a vertical temperature gradient. Latex mimcrospheres 2 microns in diameter are suspended in the liquid to reveal the convective flow. Convective and morphological stability is observed as a function of solute concentration and growth velocity. These measurements are compared with theoretical calculations that predict the transition from stability to instability as a function of solidification conditions. The predicted transitions occur at low concentrations and solidification velocities; for this reason, extreme care must be taken in order to eliminate the effects of impurities or thermally induced convection.

Schaefer, R. J.↗
NASA NTRS1987

Growth and characterization of molecular beam epitaxial GaAs layers on porous silicon

GaAs layers have been grown on porous silicon (PS) substrates with good crystallinity by molecular beam epitaxy. In spite of the surface irregularity of PS substrates, no surface morphology deterioration was observed on epitaxial GaAs overlayers. A 10-percent Rutherford backscattering spectroscopy minimum channeling yield for GaAs-on-PS layers as compared to 16 percent for GaAs-on-Si layers grown under the same condition indicates a possible improvement of crystallinity when GaAs is grown on PS. Transmission electron microscopy reveals that the dominant defects in the GaAs-on-PS layers are microtwins and stacking faults, which originate from the GaAs/PS interface. GaAs is found to penetrate into the PS layers. n-type GaAs/p-type PS heterojunction diodes were fabricated with good rectifying characteristics.

Lin, T. L.↗