Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Run-Through Stabilization: An MPI Proposal for Process Fault Tolerance

The MPI standard lacks semantics and interfaces for sustained application execution in the presence of process failures. Exascale HPC systems may require scalable, fault resilient MPI applications. The mission of the MPI Forum's Fault Tolerance Working Group is to enhance the standard to enable the development of scalable, fault tolerant HPC applications. This paper presents an overview of the Run-Through Stabilization proposal. This proposal allows an application to continue execution even if MPI processes fail during execution. The discussion introduces the implications on point-to-point and collective operations over communicators, though the full proposal addresses all aspects of the MPI standard.

99 GENERAL AND MISCELLANEOUS↗

Dynamic stabilization of Rayleigh-Taylor instability in Newtonian fluids

Dynamic stabilization of incompressible and immiscible Newtonian fluids is studied by means of an approximate analytical model that considers the vertical vibration of the interface between the fluids. The force driving the vibration is modeled by periodic sequences of Dirac deltas. The model shows the roles played by surface tension and viscosity in determining the stability boundaries and the relevant similarity parameters are found. The results are compared with previous theoretical and experimental studies that used a sinusoidal vibration and they are found to present the same qualitative features provided a symmetric sequence of Dirac deltas is considered. Instead, important differences are observed when an asymmetric driving is used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equilibrium solute segregation to matrix- θ' precipitate interfaces in Al-Cu alloys from first principles

Particular combinations of solute atoms segregated to the interface of the Al and θ ' - Al 2 Cu in Al-Cu alloys can help stabilize θ ' precipitates at high temperatures. Stabilization of such precipitates is determined by a combination of thermodynamics (including driving forces for coarsening and transformation and solute segregation tendencies) and kinetic effects (including solute diffusion and interfacial mobility in the presence of interfacial solute segregation). For some alloys such as recent Al-Cu-based alloys, multiple solutes segregate in significant quantities to interfaces, and solute-solute interactions at the interface are important, with multiple types of solutes competing for similar interfacial sites. To treat this situation, we develop and apply a statistical mechanics approach to calculate the temperature-dependent equilibrium solute atoms distribution near the coherent and semicoherent interfaces between the Al matrix and the θ ' - Al 2 Cu precipitates. The developed approach is applied to the investigation of Si, Mn, and Zr segregation at the interface, as particular combinations of these elements affect the thermal stability of the θ ' precipitates. We demonstrate that because Si and Mn atoms segregate on the same semicoherent interface, the presence of Si reduces the concentration of Mn solutes at the interface. Si atoms preferably occupy the first layer of the interface and compete with Mn atoms for one type of particular sites in the layer. Mn atoms preferably occupy the second layer of the semicoherent interface, and the Mn-Mn interaction plays an important role in their distribution. Zr atoms mostly segregate on one of the two nonequivalent sites of the second layer of the coherent interface. Due to symmetry properties of the coherent interface, the calculations show that the segregation Zr of atoms to this interface will likely lead to the formation of L 1 2 ordered Al 3 Zr layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced Integration in Multi-Scale Mechanics and Welding Process Simulation in Weld Integrity Assessment

In this project, mathematical models that predict the microstructure in pipeline steel welds were to be developed. These models were to be integrated with thermal models that describe the time-temperature history in the weld as a function of location in order to derive the spatial variation of microstructure in the weld. The microstructure predictions were also to be combined with microstructure-hardness relations, based on the additivity principle, to determine the spatial variation of hardness in the weld. EMC2 also developed microstructural models based on empirical relationships. ORNL was to pursue the development of more fundamental, theoretically based models. ORNL applied a previously developed model for inclusion formation to predict the extent and nature of inclusions that form during weld cooling from the liquid. This inclusion model was directly integrated with computational thermodynamics capability. A convenient user interface was developed for both the inclusion model and the thermodynamic phase-stability calculations. The microstructure model was based on the simultaneous transformation theory analysis as applied to the transformation of austenite to various ferrite constituents during weld cooling. The model available on the Materials Algorithm Project web site was used. Extensive modification of this model was required to correct problems with compilation and calculations as a function of the computational platform (Unix, Linux, Windows, etc.) that was used. The user interface for the inclusion model and thermodynamic phase-stability calculations was delivered to EMC2 along with the modified and correct microstructure model. Evaluation of the theoretically based model will be carried out and the predictions will be compared with experimental results as well as predictions based on the empirical models developed by EMC2.

36 MATERIALS SCIENCE↗

Structural, Functional, and Immunogenic Insights on Cu,Zn Superoxide Dismutase Pathogenic Virulence Factors from Neisseria meningitidis and Brucella abortus

ABSTRACT Bacterial pathogens Neisseria meningitidis and Brucella abortus pose threats to human and animal health worldwide, causing meningococcal disease and brucellosis, respectively. Mortality from acute N. meningitidis infections remains high despite antibiotics, and brucellosis presents alimentary and health consequences. Superoxide dismutases are master regulators of reactive oxygen and general pathogenicity factors and are therefore therapeutic targets. Cu,Zn superoxide dismutases (SODs) localized to the periplasm promote survival by detoxifying superoxide radicals generated by major host antimicrobial immune responses. We discovered that passive immunization with an antibody directed at N. meningitidis SOD (NmSOD) was protective in a mouse infection model. To define the relevant atomic details and solution assembly states of this important virulence factor, we report high-resolution and X-ray scattering analyses of NmSOD and of SOD from B. abortus (BaSOD). The NmSOD structures revealed an auxiliary tetrahedral Cu-binding site bridging the dimer interface; mutational analyses suggested that this metal site contributes to protein stability, with implications for bacterial defense mechanisms. Biochemical and structural analyses informed us about electrostatic substrate guidance, dimer assembly, and an exposed C-terminal epitope in the NmSOD dimer. In contrast, the monomeric BaSOD structure provided insights for extending immunogenic peptide epitopes derived from the protein. These collective results reveal unique contributions of SOD to pathogenic virulence, refine predictive motifs for distinguishing SOD classes, and suggest general targets for antibacterial immune responses. The identified functional contributions, motifs, and targets distinguishing bacterial and eukaryotic SOD assemblies presented here provide a foundation for efforts to develop SOD-specific inhibitors of or vaccines against these harmful pathogens. IMPORTANCE By protecting microbes against reactive oxygen insults, SODs aid survival of many bacteria within their hosts. Despite the ubiquity and conservation of these key enzymes, notable species-specific differences relevant to pathogenesis remain undefined. To probe mechanisms that govern the functioning of Neisseria meningitidis and Brucella abortus SODs, we used X-ray structures, enzymology, modeling, and murine infection experiments. We identified virulence determinants common to the two homologs, assembly differences, and a unique metal reservoir within meningococcal SOD that stabilizes the enzyme and may provide a safeguard against copper toxicity. The insights reported here provide a rationale and a basis for SOD-specific drug design and an extension of immunogen design to target two important pathogens that continue to pose global health threats.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Thin Films of Uniform Hematite Nanoparticles: Controls on Surface Hydrophobicity and Self-Assembly

In this study we show that uniform hematite ( -Fe2O3) nanoparticle thin films with controlled layer thickness can be formed by Langmuir-Blodgett (LB) monolayer deposition on surface areas of several square centimeters. The technique involves synthesis of uniform hematite nanoparticles by forced hydrolysis and surface modifications for increased hydrophobicity to bring the particles to the air-water interface. Methods of thermal treatment, stepped solvent exchange, and oleate surfactant coating were studied for their effectiveness in increasing hydrophobicity by removing surface adsorbed water and OH groups and were subsequently validated by Fourier-transform infrared (FTIR) spectral analysis. Surface pressure-area ( -A) and surface pressure-time ( -t) isotherms indicate that the stability of the particle monolayer at the air-water interface depends on the method of surface modification. Thermal evaporation treatment was found to produce thin films of hematite nanoparticles with the greatest uniformity and surface coverage as characterized by UV-visible spectroscopic, scanning electron microscopic (SEM) and atomic force microscopic (AFM) analyses.

36 MATERIALS SCIENCE↗

Atomic-scale tuned interface of nickel-rich cathode for enhanced electrochemical performance in lithium-ion batteries

The Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC6 22 ) is one promising cathode for lithium-ion batteries (LIBs), but suffers from poor cycling stability under high cutoff potentials. The performance degradation was reflected as capacity fading and voltage drop, having their roots in instable interface of NMC622. Aimed at improving interfacial stability, in this study, we deposited nanoscale ZrO 2 coatings conformally over NMC622 cathodes using atomic layer deposition (ALD). We found that, under a high cutoff voltage (4.5 V), the ALD ZrO 2 coatings evidently improved the performance of NMC622 cathode, showing better cyclability and higher sustainable capacity. In addition, the ALD coatings dramatically boosted the rate capability of NMC622. All these compelling performance results are ascribed to the atomic-scale tunable ZrO 2 coatings via ALD, which create stable interface and thereby inhibit unfavorable evolutions. In the study, we utilize a suite of characterization tools and various analyses to clarify the effects of ALD ZrO 2 coatings. This study will be helpful for improving the performance of nickel-rich cathodes via interfacial engineering using ALD.

25 ENERGY STORAGE↗

Tuning Two Interfaces with Fluoroethylene Carbonate Electrolytes for High-Performance Li/LCO Batteries

Various electrolytes have been reported to enhance the reversibility of Li metal electrodes. However, for these electrolytes, concurrent and balanced control of Li metal and positive electrode interfaces is a critical step toward fabrication of high performance Li metal batteries. Here, we report the tuning of Li metal and lithium cobalt oxide (LCO) interfaces with fluoroethylene carbonate (FEC)-containing electrolytes to achieve high cycling stability of Li/LCO batteries. Reversibility of Li metal electrode is considerably enhanced for electrolytes with high FEC contents, confirming the positive effect of FEC on the stabilization of Li metal. electrode. However, for FEC content of 50 wt% and above, the discharge capacity is significantly reduced due to the formation of a passivation layer on the LCO cathodes. Using balanced tuning of the two interfaces, stable cycling over 350 cycle at 1.5 mA cm-2 is achieved for an Li/LCO cell with 1M PF6 FEC/DMC=30/70 electrolyte. The enhanced reversibility of the Li metal electrode is associated with the formation of LiF and polycarbonate in the FEC-derived solid electrolyte interface (SEI) layer. In addition, electrolytes with high FEC content lead to lateral Li deposition on the sides of Li deposits and larger dimensions of rod-like Li deposits, suggesting the elastic and ion conductive nature of the FEC-derived SEI layer.

Lee, Jinhong↗

SimApp 1.8.x

System for converting DESIRE (Direct Executing Simulation in Real Time) simulation models to executable code models (C# / C++). These converted models are used as the basis for 2 products, one of which is the focus of this review: an engineering design interface for Fissile Solution Systems. ModelConverter.exe (C#) converts DESIRE model inputs to a C++ plug-in subclass. SimApp.exe (C# / C++) has a C++ dll that is a numerical integration engine that the Converted models plug into. The engineering design interface is a C# GUI that calls on the C++ dll to execute a particular converted model. The GUI allows the user to specify the length of a simulation, run the simulation, view data plots and data tables. Stability plots may also be produced and manipulated. The engineering design interface will be released as source code and executable; the model converter source is also intended for release.

Determan, JohnC.↗

SimApp 1.8.x

System for converting DESIRE (Direct Executing Simulation in Real Time) simulation models to executable code models (C# / C++). These converted models are used as the basis for 2 products, one of which is the focus of this review: an engineering design interface for Fissile Solution Systems. ModelConverter.exe (C#) converts DESIRE model inputs to a C++ plug-in subclass. SimApp.exe (C# / C++) has a C++ dll that is a numerical integration engine that the Converted models plug into. The engineering design interface is a C# GUI that calls on the C++ dll to execute a particular converted model. The GUI allows the user to specify the length of a simulation, run the simulation, view data plots and data tables. Stability plots may also be produced and manipulated. The engineering design interface will be released as source code and executable; the model converter source is also intended for release.

Determan, John C.↗

Constellation: The autonomous control and data acquisition system for dynamic experimental setups

The operation of instruments and detectors in laboratory or beamline environments presents a complex challenge, requiring stable operation of multiple concurrent devices, often controlled by separate hardware and software solutions. These environments frequently undergo modifications, such as the inclusion of different auxiliary devices depending on the experiment or facility, adding further complexity. The successful management of such dynamic configurations demands a flexible and robust system capable of controlling data acquisition, monitoring experimental setups, enabling seamless reconfiguration, and integrating new devices with limited effort. This paper presents Constellation, a flexible and network-distributed control and data acquisition software framework tailored to laboratory and beamline environments, that addresses the limitations of existing solutions. The framework is designed with a focus on extensibility, providing a streamlined interface for instrument integration. It supports efficient system setup via network discovery mechanisms, promotes stability through autonomous operational features, and provides comprehensive documentation and supporting tools for operators and application developers such as controllers and logging interfaces. At the core of the architectural design is the autonomy of the individual components, called satellites, which can make independent decisions about their operation and communicate these decisions to other components. This paper introduces the design principles and framework architecture of Constellation, presents the available graphical user interfaces, shares insights from initial successful deployments, and provides an outlook on future developments and applications.

Autonomy↗

On the generation of charge-carrier recombination centers in the sapphire substrates of silicon-on-sapphire structures

A method for the production of high-quality radiation-resistant silicon-on-sapphire structures through the fabrication of a layer of nanopores in sapphire by helium ion implantation, i.e., by creating charge-carrier recombination centers, is proposed. In this case, the quality of the silicon layer is simultaneously improved. The problem of the thermal stability of the pores is discussed with the aim of analyzing the possibility of producing a microcircuit on the resultant modified silicon-on-sapphire sample. The layer of pores possesses a large total surface area and, hence, decreases the lifetime of charge carriers generated during irradiation of the operating microcircuit. This effect reduces the charge at the silicon-sapphire interface and improves radiation resistance.

36 MATERIALS SCIENCE↗

Ion assisted growth of B{sub 4}C diffusion barrier layers in Mo/Si multilayered structures

We investigated the thermal stability of e-beam deposited Mo/B{sub 4}C/Si/B{sub 4}C layered systems, with and without ion assistance during the growth of the B{sub 4}C diffusion barrier layers. The thermal stability was investigated by in situ thermal annealing during grazing incidence X-ray reflection. By studying partially treated B{sub 4}C barrier layers, we found that the improvement in thermal stability is caused by an enhanced density of the B{sub 4}C layer.

36 MATERIALS SCIENCE↗

Tuning band alignment using interface dipoles at the Pt/anatase TiO 2 interface

The Schottky barrier heights at the Pt/TiO 2 (001) junctions are modulated over 0.8 eV by inserting <1 nm of LaAlO 3 . The large electric field in the LaAlO 3 is stabilized by preserving the continuity of in-plane lattice symmetry at the oxide interface. Lastly, these results greatly expand the application of dipole engineering to versatile polycrystalline metal/binary oxide functional interfaces.

36 MATERIALS SCIENCE↗

Building Reconfigurable Devices Using Complex Liquid–Fluid Interfaces

Liquid-fluid interfaces provide a platform both for structuring liquids into complex shapes and assembling dimensionally confined, functional nanomaterials. Historically, attention in this area has focused on simple emulsions and foams, in which surface-active materials such as surfactants or colloids stabilize structures against coalescence and alter the mechanical properties of the interface. In recent decades, however, a growing body of work has begun to demonstrate the full potential of the assembly of nanomaterials at liquid-fluid interfaces to generate functionally advanced, biomimetic systems. In this work, a broad overview is given, from fundamentals to applications, of the use of liquid-fluid interfaces to generate complex, all-liquid devices with a myriad of potential applications.

36 MATERIALS SCIENCE↗

Performance of Damaged Soil-Concrete Wraparound Dam Sections under Dynamic Loading

Predicting seismic or shock loading damage of the soil-concrete interface where an embankment wraparound dam provides support to the end monoliths in a concrete gravity dam is an inherently challenging three-dimensional coupled problem. We wish to predict formation and growth of a crack between the soil and concrete with a sustained flow of water. Further, we seek to better understand all critical phenomenology of this type of problem such as the potential mitigating and stabilizing role of upstream and downstream filter zone and shell materials. This collaborative research effort will ultimately determine whether advances in computational platforms, constitutive soil models (advances in representing particulates, tension, flow, and hydraulic erosion), and physical testing (advances in centrifuge and flume testing) can be applied successfully to solve this complex problem. Our focus is (1) to develop and validate high fidelity numerical models to investigate crack formation, soil erosion, transport of materials, and stability as part of the erosion process, and deposition within interface cracks; and (2) to investigate the performance of the filter zone materials if an extreme loading event such as an earthquake or shock damages the wraparound section. Our numerical tools include both continuum and discrete approaches. The continuum approach is based on the drift-flux multiphase model where a fluid and a solid are represented as interpenetrating continua and can account for turbulent flow characteristics, particle lift forces due to shear flow, particle collisions, and gravity settling. The discrete particle approach is also applied and is useful when deriving constitutive laws and parameterizations of soil behavior. Different experimental validation studies are under consideration for model validation and calibration. Several case studies for different crack sizes and orientations, particle sizes and environmental hydraulic conditions may be required to confirm the conditions necessary for self-healing or catastrophic growth of a crack. We will present both numerical and experimental findings to date on this effort in light of necessary considerations for further study.

58 GEOSCIENCES↗

Quantum oscillations from networked topological interfaces in a Weyl semimetal

Layered transition metal chalcogenides are promising hosts of electronic Weyl nodes and topological superconductivity. MoTe 2 is a striking example that harbors both noncentrosymmetric T d and centrosymmetric T’ phases, both of which have been identified as topologically nontrivial. Applied pressure tunes the structural transition separating these phases to zero temperature, stabilizing a mixed T d –T’ matrix that entails a network of interfaces between the two nontrivial topological phases. Here, we show that this critical pressure range is characterized by distinct coherent quantum oscillations, indicating that the difference in topology between topologically nonvtrivial T d and T’ phases gives rise to an emergent electronic structure: a network of topological interfaces. A rare combination of topologically nontrivial electronic structures and locked-in transformation barriers leads to this counterintuitive situation, wherein quantum oscillations can be observed in a structurally inhomogeneous material. These results further open the possibility of stabilizing multiple topological phases coexisting with superconductivity.

36 MATERIALS SCIENCE↗