Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Hybrid Li-S pouch cell with a reinforced sulfide glass solid-state electrolyte film separator

Here, in this paper, sulfide glass electrolyte powder with a nominal composition of (Li 2 S) 60 (SiS 2 ) 28 (P 2 S 5 ) 12 is hot pressed at a 330°C and 12 MPa into separator films using non-woven fiberglass reinforcement. The reinforced separator films are 93% dense, bendable, and have an ionic conductivity of 0.7 mS/cm at room temperature. When integrated into hybrid Li-S coin cells with liquid electrolyte, these reinforced glass separators blocked the parasitic polysulfide shuttle sufficiently to enable reversible cycling without LiNO 3 co-salt. Furthermore, the scalability of the reinforced glass separator technology is demonstrated by assembling and testing a hybrid single-layer pouch cell.

25 ENERGY STORAGE↗

Structural and impedance studies of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} synthesized by sol-gel method

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is synthesized by sol-gel method by using succinic acid as chelating agent. X-ray diffraction pattern confirms the material is spinel cubic structure with Fd3m space group. Impedance spectroscopy analysis of spinel LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} was performed under a wide frequency and temperature range of 50 Hz to 5 MHz and 303 K to 783 K respectively. The hopping of the electrons, ionic conductivity and activation energy were analyzed from the relaxation frequency of the imaginary impedance (Z”). The activation energy E{sub a} is calculated from the Arrhenius plots and it is found to be 0.3713 eV, which indicates the existence of oxygen vacancy in the material. Nyquist plot indicates the presence of grain effect in the material and suppression in the grain effect is observed with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Key Role of Grain Boundary Dynamics in Revolutionizing the Potential of Solid Electrolytes

Solid electrolytes (SEs) have the potential to enhance the safety and performance of Li-metal batteries. However, the existence of grain boundaries in polycrystalline SEs presents a significant challenge for both ionic and electronic migration, promoting the propagation of detrimental lithium dendrites. This study compares the roles of grain boundaries in electrical properties of three distinct SEs including garnet-type Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZO), argyrodite-type Li 6 PS 5 Cl (LPSC), and NASICON-type Li 1+x+y Al x (Ti,Ge) 2-x Si y P 3-y O 12 (LATP). Results demonstrate that the electronic and ionic conductivities of solid-state electrolytes are affected differently by grain boundaries, depending on the specific type of electrolyte. For instance, LLZO and LATP experience dielectric breakdown at 3.7 and 5.3 V, respectively, while LPSC does not exhibit such behavior. Here, a new chemical modification is proposed that simultaneously alters the composition of both the surface and grain boundaries of SEs, ultimately reducing electronic conductivity for the LLZO SEs. Consequently, the proposed LLZO exhibits unprecedented dendrite-free cycling stability, achieving a remarkable 12 000-h lifetime at room temperature, surpassing conventional strategies such as surface coatings in dendrite mitigation. This study highlights the significance of modifying grain boundaries to design safe and durable Li-metal batteries. It provides new insights for developing SEs that are highly resistant to dendrite formation.

36 MATERIALS SCIENCE↗

Practical Challenges and Future Perspectives of All-Solid-State Lithium-Metal Batteries

The fundamental understandings and technological innovations in lithium-ion batteries are essential for delivering high energy density, stable cyclability, and cost-effective energy storages with the growing demands in the applications of electrical vehicles and smart grid. Solid-state electrolytes (SSEs) are more promising than organic liquid electrolyte in terms of excellent safety in developing lithium-metal anode as well as other high-capacity cathode chemistries, such as sulfur and oxygen. Considerable efforts have been made to give birth to the superionic conductors with ionic conductivities higher than 10 –3 S cm –1 at room temperature. Furthermore, the high interfacial impedances from the poor compatibility of SSEs with electrodes limit their practical applications, which are discussed in this review. Furthermore, the recent advances and critical challenges for all-solid-state lithium-metal batteries based on the cathode materials of lithium-intercalation compounds, sulfur, and oxygen are overviewed, and their future developments are also prospected.

25 ENERGY STORAGE↗

Performance of electrical double layer capacitors fabricated with gel polymer electrolytes containing Li{sup +} and K{sup +}-salts: A comparison

The comparative performance of the solid-state electrical double layer capacitors (EDLCs) based on the multiwalled carbon nanotube (MWCNT) electrodes and poly (vinaylidinefluoride-co-hexafluoropropyline) (PVdF-HFP) based gel polymer electrolytes (GPEs) containing potassium and lithium salts have been studied. The room temperature ionic conductivity of the GPEs have been found to be ∼3.8×10{sup −3} and 5.9×10{sup −3} S cm{sup −1} for lithium and potassium based systems. The performance of EDLC cells studied by impedance spectroscopy, cyclic voltammetry and constant current charge-discharge techniques, indicate that the EDLC with potassium salt containing GPE shows excellent performance almost equivalent to the EDLC with Li-salt-based GPE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

OVERVIEW OF ENHANCED HANFORD SINGLE-SHELL TANK (SST) INTEGRITY PROJECT - 12128

To improve the understanding of the single-shell tanks integrity, Washington River Protection Solutions, LLC, the USDOE Hanford Site tank contractor, developed an enhanced Single-Shell Tank (SST) Integrity Project in 2009. An expert panel on SST integrity, consisting of various subject matters experts in industry and academia, was created to provide recommendations supporting the development of the project. This panel developed 33 recommendations in four main areas of interest: structural integrity, liner degradation, leak integrity and prevention, and mitigation of contamination migration, Seventeen of these recommendations were used to develop the basis for the M-45-10-1 Change Package for the Hanford Federal Agreement and Compliance Order, which is also known as the Tri-Party Agreement. The change package identified two phases of work for SST integrity. The initial phase has been focused on efforts to envelope the integrity of the tanks. The initial phase was divided into two primary areas of investigation: structural integrity and leak integrity. If necessary based on the outcome from the initial work, a second phase would be focused on further definition of the integrity of the concrete and liners. Combined these two phases are designed to support the formal integrity assessment of the Hanford SSTs in 2018 by Independent Qualified Registered Engineer. The work to further define the DOE's understanding of the structural integrity SSTs involves preparing a modern Analysis of Record using a finite element analysis program. Structural analyses of the SSTs have been conducted since 1957, but these analyses used analog calculation, less rigorous models, or focused on individual structures. As such, an integrated understanding of all of the SSTs has not been developed to modern expectations. In support of this effort, other milestones will address the visual inspection of the tank concrete and the collection of concrete core samples from the tanks for analysis of current mechanics properties. The work on the liner leak integrity has examined the leaks from 23 tanks with liner failures. Individual leak assessments are being developed for each tank to identify the leak cause and location. Also a common cause study is being performed to take the data from individual tanks to look for trends in the failure. Supporting this work is an assessment of the leak rate from tanks at both Hanford and the Savannah River Site and a new method to locate leak sites in tank liner using ionic conductivity. A separate activity is being conducted to examine the propensity for corrosion in select single shell tanks with aggressive waste layers. The work for these two main efforts will provide the basis for the phase two planning. If the margins identified aren't sufficient to ensure the integrity through the life of the mission, phase two would focus on activities to further enhance the understanding of tank integrity. Also coincident with any phase-two work would be the integrity analysis for the tanks, which would be complete in 2018. With delays in the completion of waste treatment facilities at Hanford, greater reliance on safe, continued storage of waste in the single shell tanks is increased in importance. The goal of integrity assessment would provide basis to continue SST activities till the end of the treatment mission.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structural and electrical study of ZrO{sub 2} nanoparticles modified with surfactants

Zirconia ceramic is one of the most investigated materials for its outstanding mechanical properties and ionic conduction properties, due to its high oxygen ion conduction. In order to achieve novel properties of zirconia nanoparticles, nanoparticles of zirconia are modified by using two different surfactants (SDS and CTAB) were prepared by in-situ method using zirconia/surfactant dispersions. Zirconia nanoparticles with surfactant (SDS or CTAB) were synthesized by hydrothermal method. The structural and optical properties of Zirconia/surfactant nanoparticles were investigated comprehensively by X-Ray diffraction (XRD), and electrical measurements. XRD highlights the crystalline behavior of nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical studies on polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) membranes prepared by electrospinning and phase inversion-A comparative study

The synthesis, characterization and electrochemical properties of poly(vinylidene fluoride-co-hexafluoropropylene) {l_brace}P(VdF-co-HFP){r_brace} prepared by electrospinning and phase inversion methods are reported. The morphologies of the membranes were studied by field emission scanning electron microscope and atomic force microscope. Thermal properties of the membranes were evaluated by differential scanning calorimetry. The resultant porous membranes are good absorbents of liquid electrolytes and exhibit high electrolyte retention capacity. The polymer electrolytes were prepared by soaking the membranes in liquid electrolyte. The temperature dependent ionic conductivity and electrochemical properties were evaluated. Li/LiFePO{sub 4} cell with electrospun membrane delivers a discharge capacity of 145 mAh/g, which corresponds to 85% utilization of active material under the test conditions and shows lower capacity fade under continuous cycling.

36 MATERIALS SCIENCE↗

A Pentafluorophenylboron Oxalate Additive in Non-aqueous Electrolytes 3 for Lithium Batteries

A novel compound named pentafluorophenylboron oxalate (PFPBO) has been synthesized. PFPBO has a unique molecular structure containing a boron atom center with electron deficiency and an oxalate group. It is found that when PFPBO is used as additive, the solubility of lithium fluoride (LiF) or lithium oxide (Li{sub 2}O, Li{sub 2}O{sub 2}) in propylene carbonate (PC) and dimethyl carbonate (DMC) solvents can be increased dramatically. The new electrolytes show high ionic conductivity, high lithium ion transference number and good compatibility with LiMn{sub 2}O{sub 4} cathode and MCMB anode. PFPBO was synthesized with the designed structure to act as a bi-functional additive: boron-based anion receptor (BBAR) additive and stable solid electrolyte interphase (SEI) formation additive in PC-based electrolytes. The results show it does possess these two desired functionalities.

25 ENERGY STORAGE↗

Medium-Range Ordering in the Ionic Glass Electrolytes LiPON and LiSiPON

In this work, we provide an in-depth structural characterization of the amorphous ionic glasses LiPON and LiSiPON with high Li content. Based on ab initio molecular dynamics simulations, the structure of these materials is an inverted structure with either isolated polyanion tetrahedra or polyanion dimers in a Li+ matrix. Based on neutron scattering data, this type of inverted structure leads to a significant amount of medium-range ordering in the structure, as demonstrated by two sharp diffraction peaks and a periodic structural oscillation in the density function G(r). While this medium-range ordering is commonly observed in liquids and metallic glasses, it has not previously been observed in oxides. On a local scale, adding N and Si increases the number of anion bridges and polyanion dimer structures, leading to higher ionic conductivity. In the medium-range ordering, the addition of Si leads to more disorder in the polyanion substructure but a significant increase in the ordering of the O substructure. Finally, we demonstrate that this inverted structure with medium-range ordering results in a glassy material that is both mechanically stiff and ductile on the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strongly correlated perovskite lithium ion shuttles

Solid-state ion shuttles are of broad interest in electrochemical devices, nonvolatile memory, neuromorphic computing, and biomimicry utilizing synthetic membranes. Traditional design approaches are primarily based on substitutional doping of dissimilar valent cations in a solid lattice, which has inherent limits on dopant concentration and thereby ionic conductivity. Here, we demonstrate perovskite nickelates as Li-ion shuttles with simultaneous suppression of electronic transport via Mott transition. Electrochemically lithiated SmNiO 3 (Li-SNO) contains a large amount of mobile Li + located in interstitial sites of the perovskite approaching one dopant ion per unit cell. A significant lattice expansion associated with interstitial doping allows for fast Li + conduction with reduced activation energy. We further present a generalization of this approach with results on other rare-earth perovskite nickelates as well as dopants such as Na + . The results highlight the potential of quantum materials and emergent physics in design of ion conductors.

36 MATERIALS SCIENCE↗

Green Composite Based on PHB and Montmorillonite for KNO{sub 3} and NPK Delivery System

Controlled release fertilizer (CRF) as a safe system for reducing environmental pollution still remains as demand for the agribusiness. Natural and biodegradable polymer materials have been proposed as a prominent and sustainable controlled delivery system. Composite based on polyhydroxybutyrate (PHB), starch, glycerol and montmorillonite (PHBSGMMt) has been proposed as a carrier for controlled release fertilizers, such as KNO{sub 3} and NPK. PHBSGMMt with 10 wt% of KNO{sub 3} or NPK processed by melting at 162 °C, 60 rpm during 10 min in a mixer chamber of torque rheometer. Composites were characterized according to its structure by FTIR and XRD, in thermal behavior by TGA and DSC, and morphology by SEM. Fertilizers release in water was determined by ionic conductivity. Clay, KNO{sub 3}, and NPK increased the PHB/starch compatibility and homogeneity, resulting in a well-interfaced material obtained for PHBSGMMTNPK. MMtKNO{sub 3} was mainly on PHB phase and MMtNPK on the compatible polymeric phase. These behaviors explain the faster release of KNO{sub 3} in water medium since the KNO{sub 3} has high solubility and the phase separation creates fissures that turn in water pathway. Kinetic parameters classified the material as a non-Fickian diffusion or anomalous transport mechanism.

36 MATERIALS SCIENCE↗

Li 0.625 Al 0.125 H 0.25 Cl 0.75 O 0.25 Superionic Conductor with Disordered Rock-Salt Structure

Solid-state Li-ion conductors are of broad interest in electrochemical energy storage, especially in solid-state Li batteries that serve as a promising alternative for the next-generation safe and high-energy-density batteries. Exploring solid-state superionic conductors is significant for the development of solid-state Li batteries with high performance. Herein, we report a disordered rock-salt (A 1 B 1 )-structured solid electrolyte (Li 0.625 Al 0.125 H 0.25 )(Cl 0.75 O 0.25 ) (abbr. LAHCO) that was synthesized using Li 2 OHCl and LiAlCl 4 as precursors. Neutron diffraction reveals that Li, Al, and H atoms occupy the A sites and O and Cl atoms occupy the B sites in the A 1 B 1 structure for pure LAHCO. The LAHCO compound with excess LiAlCl 4 shows the highest Li + ionic conductivity of ~10 –4 S cm –1 at room temperature due to the disordering induced by configurational entropy as well as the entropy of mixing. Moreover, LAHCO–LiAlCl 4 solid electrolyte exhibits a stable polarization voltage under a current density of 5–50 μA cm –2 in Li symmetric cells. Furthermore, this work not only explicates the importance of Li-ion conductors with a rock-salt structure but also contributes toward the development of solid-state Li-ion conductors for broad applications.

25 ENERGY STORAGE↗

Dynamic density functional theory of polymers with salt in electric fields

Here we present a dynamic density functional theory for modeling the effects of applied electric fields on the local structure of polymers with added salt (polymer electrolytes). Time-dependent equations for the local electrostatic potential and volume fractions of polymer, cation, and anion of added salt are developed using the principles of linear irreversible thermodynamics. For such a development, a field theoretic description of the free energy of polymer melts doped with salts is used, which captures the effects of local variations in the dielectric function. Connections of the dynamic density functional theory with experiments are established by relating the three phenomenological Onsager’s transport coefficients of the theory to the mutual diffusion of electrolyte, ionic conductivity, and transference number of one of the ions. The theory is connected with a statistical mechanical model developed by Bearman and Kirkwood [J. Chem. Phys. 28, 136 (1958)] after relating the three transport coefficients to friction coefficients. The steady-state limit of the dynamic density functional theory is used to understand the effects of dielectric inhomogeneity on the phase separation in polymer electrolytes. The theory developed here provides not only a way to connect with experiments but also to develop multi-scale models for studying connections between local structure and ion transport in polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of Water Content in Polymer Electrolyte Membranes using High Resolution Neutron Imaging

Sufficient water content within a polymer electrolyte membrane (PEM) is necessary for adequate ionic conductivity. Membrane hydration is therefore a fundamental requirement for fuel cell operation. The hydration state of the membrane affects the water transport within, as both the diffusion coefficient and electroosmotic drag depend on the water content. Membrane s water uptake is conventionally measured ex situ by weighing freeswelling samples equilibrated at controlled water activity. In the present study, water profiles in Nafion membranes were measured using high-resolution neutron imaging. The state-of-theart, 13 m resolution neutron detector is capable of resolving water distributions across N1120, N1110 and N117 membranes. It provides a means to measure the water uptake and transport properties of fuel cell membranes in situ.

30 DIRECT ENERGY CONVERSION↗

Pressure induced silver ion displacement in La{sub 3}Ag{sub 0.82}SnS{sub 7}

Highlights: Black-Right-Pointing-Pointer The silver ion shifts with increasing pressure in the direction of the central-point of sulphur trigonal antiprism. Black-Right-Pointing-Pointer Coordination number changes from CN = 3 to CN = 6 at {approx}3 GPa. Black-Right-Pointing-Pointer Zero-pressure bulk modulus is B{sub 0} = 61.74 GPa and the pressure derivative is B{sup Prime }{sub 0}=4.02. Black-Right-Pointing-Pointer No phase transition up to 4.5 GPa was detected. -- Abstract: The compounds with the general formula Ln{sub 3}MTX{sub 7} (space group P6{sub 3}) (Ln - rare-earth element, M - monovalent element (Cu, Ag), T - Si, Ge, Sn and X - S, Se) are interesting owing to the possible application in the field of ionic conductivity. In the crystal structure the face-sharing [Ag(S){sub 6}] triangular antiprisms form the channels where the Ag{sup +} ion can migrate along the crystallographic c axis. High-pressure X-ray diffraction shows that Ag{sup +} ion moves towards the central-point of [Ag(S){sub 6}] when pressure is risen. As a consequence, the coordination number of Ag{sup +} changes from CN = 3 to CN = 6 at {approx}3 GPa. The La{sub 3}Ag{sub 0.82}SnS{sub 7} has stiff structure; zero-pressure bulk modulus is B{sub 0} = 61.74 GPa and the pressure derivative is B{sup Prime }{sub 0}=4.02.

36 MATERIALS SCIENCE↗

Dual-Salt Electrolytes to Effectively Reduce Impedance Rise of High-Nickel Lithium-Ion Batteries

Simply mixing several lithium salts in one electrolyte to obtain blended salt electrolytes has been demonstrated as a promising strategy to formulate advanced electrolytes for lithium metal batteries (LMBs) and lithium-ion batteries (LIBs). In this study, we report the use of dual-salt electrolytes containing lithium hexafluorophosphate (LiPF6) and lithium difluorophosphate (LiDFP) in ethylene carbonate/ethyl methyl carbonate (EC/EMC) mixture and tested them in layered high-nickel LIB cells. LiNi 0.94 Co 0.06 O 2 was synthesized through a coprecipitation method and was used as a representative high-nickel cathode for the U.S. DOE realizing next-generation cathode (RNGC) deep dive program. The ionic conductivity of dual-salt electrolytes can be maintained by controlling the amount of LiDFP. Techniques including 1 H Nuclear Magnetic Resonance (NMR), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma-mass spectrometry (ICP-MS), and differential voltage analysis (DVA) were used to understand the improved performance. Additionally, the multifaceted benefits of using the dual-salt electrolytes include (1) reduced transesterification, (2) formation of a stable cathode electrolyte interface, and (3) mitigation of cathode degradation at high voltages, especially stabilization of oxide particles during the H 2 <-> H 3 transformation.

25 ENERGY STORAGE↗

Preparation and characterization of plasticized palm-based polyurethane solid polymer electrolyte

Palm-based polyurethane solid polymer electrolyte was prepared via prepolymerization method between palm kernel oil based polyols (PKO-p) and 2,4’-diphenylmethane diisocyanate (2,4’-MDI) in acetone at room temperature with the vary amount of lithium trifuoromethanesulfonate (LiCF{sub 3}SO{sub 3}) salt and polyethylene glycol (PEG). The film was analyzed using attenuated total reflection infrared (ATR-IR) spectroscopy, electrochemical impedance spectroscopy (EIS) and X-ray diffractometry (XRD). EIS result indicated ionic conductivity obtained with 30 wt% LiCF3SO3 increased to 6.55 × 10{sup −6} S cm{sup −1} when 10 wt.% of plasticizer was added into the system. FTIR analysis showed the interaction between lithium ions and amine (-N-H) at 3600–3100 cm{sup −1}, carbonyl (-C=O) at 1750–1650 cm{sup −1} and ether (-C-O-C-) at 1150–1000 cm{sup −1} of the polyurethane forming polymer-salt complexes. The XRD result confirmed that LiCF{sub 3}SO{sub 3} salt completely dissociated within the polyurethane film with the absence of crystalline peaks of LiCF{sub 3}SO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗