Search NASA⌕ Search

SEARCH · Search NASA

Results for “production simulation codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Internal cycle modeling and environmental assessment of multiple cycle consumer products

Highlights: Black-Right-Pointing-Pointer Dynamic flow models are presented for remanufactured, reused or recycled products. Black-Right-Pointing-Pointer Early loss and stochastic return are included for fast and slow cycling products. Black-Right-Pointing-Pointer The reuse-to-input flow ratio (Internal Cycle Factor, ICF) is determined. Black-Right-Pointing-Pointer The cycle rate, which is increasing with the ICF, monitors eco-performance. Black-Right-Pointing-Pointer Early internal cycle losses diminish the ICF, the cycle rate and performance. - Abstract: Dynamic annual flow models incorporating consumer discard and usage loss and featuring deterministic and stochastic end-of-cycle (EOC) return by the consumer are developed for reused or remanufactured products (multiple cycle products, MCPs), including fast and slow cycling, short and long-lived products. It is shown that internal flows (reuse and overall consumption) increase proportionally to the dimensionless internal cycle factor (ICF) which is related to environmental impact reduction factors. The combined reuse/recycle (or cycle) rate is shown capable for shortcut, albeit effective, monitoring of environmental performance in terms of waste production, virgin material extraction and manufacturing impacts of all MCPs, a task, which physical variables (lifetime, cycling frequency, mean or total number of return trips) and conventional rates, via which environmental policy has been officially implemented (e.g. recycling rate) cannot accomplish. The cycle rate is shown to be an increasing (hyperbolic) function of ICF. The impact of the stochastic EOC return characteristics on total reuse and consumption flows, as well as on eco-performance, is assessed: symmetric EOC return has a small, positive effect on performance compared to deterministic, while early shifted EOC return is more beneficial. In order to be efficient, environmental policy should set higher minimum reuse targets for higher trippage MCPs. The results may serve for monitoring, flow accounting and comparative eco-assessment of MCPs. They may be useful in identifying reachable and efficient reuse/recycle targets for consumer products and in planning return via appropriate labelling and digital coding for enhancing environmental performance, while satisfying consumer demand.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Infrastructure for Multiphysics Software Integration in High Performance Computing-Aided Science and Engineering

The project described in this report constructed and exercised an innovative multiphysics coupling toolkit called the Illinois Rocstar MultiPhysics Application Coupling Toolkit (IMPACT). IMPACT is an open source, flexible, natively parallel infrastructure for coupling multiple uniphysics simulation codes into multiphysics computational systems. IMPACT works with codes written in several high-performance-computing (HPC) programming languages, and is designed from the beginning for HPC multiphysics code development. It is designed to be minimally invasive to the individual physics codes being integrated, and has few requirements on those physics codes for integration. The goal of IMPACT is to provide the support needed to enable coupling existing tools together in unique and innovative ways to produce powerful new multiphysics technologies without extensive modification and rewrite of the physics packages being integrated. There are three major outcomes from this project: 1) construction, testing, application, and open-source release of the IMPACT infrastructure, 2) production of example open-source multiphysics tools using IMPACT, and 3) identification and engagement of interested organizations in the tools and applications resulting from the project. This last outcome represents the incipient development of a user community and application echosystem being built using IMPACT. Multiphysics coupling standardization can only come from organizations working together to define needs and processes that span the space of necessary multiphysics outcomes, which Illinois Rocstar plans to continue driving toward. The IMPACT system, including source code, documentation, and test problems are all now available through the public gitHUB.org system to anyone interested in multiphysics code coupling. Many of the basic documents explaining use and architecture of IMPACT are also attached as appendices to this document. Online HTML documentation is available through the gitHUB site. There are over 100 unit tests provided that run through the Illinois Rocstar Application Development (IRAD) lightweight testing infrastructure that is also supplied along with IMPACT. The package as a whole provides an excellent base for developing high-quality multiphysics applications using modern software development practices. To facilitate understanding how to utilize IMPACT effectively, two multiphysics systems have been developed and are available open-source through gitHUB. The simpler of the two systems, named ElmerFoamFSI in the repository, is a multiphysics, fluid-structure-interaction (FSI) coupling of the solid mechanics package Elmer with a fluid dynamics module from OpenFOAM. This coupling illustrates how to combine software packages that are unrelated by either author or architecture and combine them into a robust, parallel multiphysics system. A more complex multiphysics tool is the Illinois Rocstar Rocstar Multiphysics code that was rebuilt during the project around IMPACT. Rocstar Multiphysics was already an HPC multiphysics tool, but now that it has been rearchitected around IMPACT, it can be readily expanded to capture new and different physics in the future. In fact, during this project, the Elmer and OpenFOAM tools were also coupled into Rocstar Multiphysics and demonstrated. The full Rocstar Multiphysics codebase is also available on gitHUB, and licensed for any organization to use as they wish. Finally, the new IMPACT product is already being used in several multiphysics code coupling projects for the Air Force, NASA and the Missile Defense Agency, and initial work on expansion of the IMPACT-enabled Rocstar Multiphysics has begun in support of a commercial company. These initiatives promise to expand the interest and reach of IMPACT and Rocstar Multiphysics, ultimately leading to the envisioned standardization and consortium of users that was one of the goals of this project.

42 ENGINEERING↗

Accelerating $\mathrm{LHC}$ event generation with simplified pilot runs and fast $\mathrm{PDF}$s

Poor computing efficiency of precision event generators for LHC physics has become a bottleneck for Monte-Carlo event simulation campaigns. We provide solutions to this problem by focusing on two major components of general-purpose event generators: The PDF evaluator and the matrix-element generator. For a typical production setup in the ATLAS experiment, we show that the two can consume about 80% of the total runtime. Using NLO simulations of pp→ℓ + ℓ - +jets and pp→$t\bar{t}$+jets as an example, we demonstrate that the computing footprint of LHAPDF and SHERPA can be reduced by factors of order 10, while maintaining the formal accuracy of the event sample. The improved codes are made publicly available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Continued Research for Improvement of PROTEUS-SN

Over the past several years, the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program of U.S. DOE has focused on developing a neutronics component as part of a larger dynamics product meant to analyze both existing and proposed nuclear reactor systems. The goal is to reduce the uncertainties and biases in reactor design activities by providing enhanced prediction capabilities. As part of the SHARP program, we have invested considerable effort into creating the PROTEUS-SN code. The PROTEUS-SN solver was intended to treat conventional homogenized assembly to explicit geometry schemes for time dependent analysis with coupled thermal-hydraulics and structural mechanics.

Smith, M. A.↗

Release of the 2008 Evaluated Nuclear Data Library (ENDL2008)

Livermore's N-Division is now releasing the first version of a major new nuclear data library. This includes some 500 evaluations (roughly four times the number in the previous standard) and many physics improvements important for calculating weapon performance, output effects, attribution signatures, key radiochemical diagnostics and performance of conventional and hybrid fission/fusion reactors. As this library is more extensive and on a much firmer nuclear physics footing than the previous ENDL99 it should become, after a period of trial use by the applied community, the new standard for programmatic applications at Livermore. This work was supported by ASC-PEM and Campaign 4. Our basic philosophy in this release was to adopt the best work of the world's different nuclear data efforts. We have drawn heavily from the U.S. ENDF project (led by Brookhaven), the Japanese JENDL project (JAEA), and the European JEFF project (NEA). Because those efforts tend to focus on reactor applications they do not include an account of the charged particles emitted following a reaction. To enable broader applications we have used theory-based calculations to add a complete description of charged particles in all evaluations in the new library. This release also includes results from the last ten years of theory and experimental work here at Livermore. Some of the most important results include the surrogate campaign for unstable uranium isotopes, the LLNL/LANL 239Pu(n,2n) evaluation, the 241Am(n,2n) evaluation validated by the recent Livermore-led experiments, and measurements of 48Ti(n,2n). As well, we have adopted more than a hundred theory-based evaluations for radiochemical diagnostics completed by R. Hoffman and M. Mustafa and that use improved optical models, level densities, and decay scheme evaluations from the theory effort. These were extended to be transport complete (they now include a description of all of the particles emitted in reactions) to enable their use in neutronics simulations. There is an ongoing effort to provide all of these radiochemical evaluations, including isomers, in the next major ENDL release. The new library has undergone extensive unclassified testing. All isotopes were required to pass a set of simple tests with both deterministic and Monte Carlo codes to ensure that, at a minimum, they do not cause problems for the transport codes. As well, the data was validated through simulations of historical integral experiments. Calculations for k eigenvalues for a broad array of bare and reflected critical assemblies show a marked improvement over ENDL99 and performance comparable to or better than any other currently available library. In particular, there is now excellent agreement with results for the bare plutonium Jezebel assembly (k=1.0007). Similarly, simulations of photon production and neutron time of flight show, with some exceptions, excellent agreement with the LLNL pulsed sphere experiments. Our intention with this initial release is to engage the programmatic community to begin the process of testing with more complicated unclassified and classified problems. We would greatly appreciate recommendations and any reports of problems or oddities. These will be included in the final release of this database in 2009.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CMSSW Scaling Limits on Many-Core Machines

Today the LHC offline computing relies heavily on CPU resources, despite the interest in compute accelerators, such as GPUs, for the longer term future. The number of cores per CPU socket has continued to increase steadily, reaching the levels of 64 cores (128 threads) with recent AMD EPYC processors, and 128 cores on Ampere Altra Max ARM processors. Over the course of the past decade, the CMS data processing framework, CMSSW, has been transformed from a single-threaded framework into a highly concurrent one. The first multithreaded version was brought into production by the start of the LHC Run 2 in 2015. Since then, the framework's threading efficiency has gradually been improved by adding more levels of concurrency and reducing the amount of serial code paths. The latest addition was support for concurrent Runs. In this work we review the concurrency model of the CMSSW, and measure its scalability with real CMS applications, such as simulation and reconstruction, on mode rn many-core machines. We show metrics such as event processing throughput and application memory usage with and without the contribution of I/O, as I/O has been the major scaling limitation for the CMS applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Decommissioning for the containment vessel of HTR-PM: Monte Carlo simulation and long-time predictions

A high temperature gas cooled reactor-pebble bed module (HTR-PM) is currently under design and construction in China. Calculations of induced radioactivity in the concrete containment vessel of HTR-PM were performed in order to predict the decommissioning problems. The main activation products and the ambient dose equivalent rate corresponding to 40 years of operations followed by 30 days/1 year/10 years of decay, were calculated by using the Monte Carlo particle transport code FLUKA. Finally, according to the Chinese National Standard and on the basis of the knowledge gained from this study, the classifications of the radioactive solid wastes were discussed, and some suggestions for the working duration of the employees were given. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Improving Fission Products at CARIBU: Near Field Detection (Q4/FY19 Quarterly Progress Report)

We have been having ongoing discussions about the analysis and the text of the 95 Zr manuscript with our collaborators at Texas A&M University (TAMU). K. Kolos has travelled to Texas to discuss, once again, some details of our GEANT4 simulation used to determine the gas-counter efficiency. In that process, we discovered that there was a slight disagreement (~0.5%) between our results and the results obtained with the EGS code used by the TAMU group. We are currently working to determine and magnitude and source of the discrepancy. This has taken a considerable amount of time and, unfortunately, has hindered us from sending out the paper to all of our collaborators. We also recently found out that Benjamin Schroeder, the Texas A&M student supported by the CENTUAR Center of Excellence who joined our project earlier this year, has decided to leave graduate school after obtaining his Master Thesis. Although this is a loss for our team, we do not foresee this to cause a major disruption in the project. Our TAMU collaborators are still committed to the success of these measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Validation of Monte Carlo simulation of neutron production in a spallation experiment

A renewed interest in experimental research on Accelerator-Driven Systems (ADS) has been initiated by the global attempt to produce energy from thorium as a safe(r), clean(er) and (more) proliferation-resistant alternative to the uranium-fuelled thermal nuclear reactors. The ADS research has been actively pursued at the Joint Institute for Nuclear Research (JINR), Dubna, since decades. Most recently, the emission of fast neutrons was experimentally investigated at the massive (m = 512 kg) natural uranium spallation target QUINTA. The target has been irradiated with the relativistic deuteron beams of energy from 0.5 AGeV up to 4 AGeV at the JINR Nuclotron accelerator in numerous experiments since 2011. Neutron production inside the target was studied through the gamma-ray spectrometry measurement of natural uranium activation detectors. Experimental reaction rates for (n,γ), (n,f) and (n,2n) reactions in uranium have provided valuable information about the neutron distribution over a wide range of energies up to some GeV. The experimental data were compared to the predictions of Monte Carlo simulations using the MCNPX 2.7.0 code. In conclusion, the results are presented and potential sources of partial disagreement are discussed later in this work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Chemistry Resolved Kinetic Flow Modeling of TATB Based Explosives

Detonation waves in insensitive, TATB based explosives are believed to have multi-time scale regimes. The initial burn rate of such explosives has a sub-microsecond time scale. However, significant late-time slow release in energy is believed to occur due to diffusion limited growth of carbon. In the intermediate time scale concentrations of product species likely change from being in equilibrium to being kinetic rate controlled. They use the thermo-chemical code CHEETAH linked to an ALE hydrodynamics code to model detonations. They term their model chemistry resolved kinetic flow as CHEETAH tracks the time dependent concentrations of individual species in the detonation wave and calculates EOS values based on the concentrations. A HE-validation suite of model simulations compared to experiments at ambient, hot, and cold temperatures has been developed. They present here a new rate model and comparison with experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optics of the NIFS negative ion source test stand by infrared calorimetry and numerical modelling

At National Institute for Fusion Science (NIFS), a multi-ampere negative ion source is used to support the R&D on H{sup −} production, extraction, and acceleration. In this contribution, we study the characteristics of the acceleration system of this source, in order to characterize the beam optics at different operational conditions. A dedicated experimental campaign was carried out at NIFS, using as main diagnostic the infra-red imaging of the beam profiles. The experimental measurements are also compared with 3D numerical simulations, in order to validate the codes and to assess their degree of reliability. The simulations show a satisfactory agreement with the experimental results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ADAPTIVELY REFINED LARGE EDDY SIMULATIONS OF A GALAXY CLUSTER: TURBULENCE MODELING AND THE PHYSICS OF THE INTRACLUSTER MEDIUM

We present a numerical scheme for modeling unresolved turbulence in cosmological adaptive mesh refinement codes. As a first application, we study the evolution of turbulence in the intracluster medium (ICM) and in the core of a galaxy cluster. Simulations with and without subgrid scale (SGS) model are compared in detail. Since the flow in the ICM is subsonic, the global turbulent energy contribution at the unresolved length scales is smaller than 1% of the internal energy. We find that the production of turbulence is closely correlated with merger events occurring in the cluster environment, and its dissipation locally affects the cluster energy budget. Because of this additional source of dissipation, the core temperature is larger and the density is smaller in the presence of SGS turbulence than in the standard adiabatic run, resulting in a higher entropy core value.

79 ASTRONOMY AND ASTROPHYSICS↗

Fuel Performance Experiments and Modeling: Fission Gas Bubble Nucleation and Growth in Alloy Nuclear Fuels

Advanced fast reactor systems being developed under the DOE's Advanced Fuel Cycle Initiative are designed to destroy TRU isotopes generated in existing and future nuclear energy systems. Over the past 40 years, multiple experiments and demonstrations have been completed using U-Zr, U-Pu-Zr, U-Mo and other metal alloys. As a result, multiple empirical and semi-empirical relationships have been established to develop empirical performance modeling codes. Many mechanistic questions about fission as mobility, bubble coalescience, and gas release have been answered through industrial experience, research, and empirical understanding. The advent of modern computational materials science, however, opens new doors of development such that physics-based multi-scale models may be developed to enable a new generation of predictive fuel performance codes that are not limited by empiricism.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Workshop on Software Productivity for Extreme-scale Science, January 13-14, 2014, Hilton Hotel, Rockville, MD

While emerging extreme-scale computing systems provide unprecedented resources for scientific discovery, DOE’s scientific communities now face a crisis in extreme-scale scientific software productivity due to a powerful confluence of factors: ongoing disruptive changes in computer architectures and new frontiers in modeling, simulation, and analysis of complex multiscale and multiphysics phenomena. Research in mission-critical science and energy problems has become increasingly dependent on high-performance computing, but productivity in extreme-scale scientific application development has not kept pace. The principal issues are (1) a significant lag between extreme-scale hardware and algorithmic innovations and their effective use in applications, leading to poorly scaling codes; (2) obstacles in the combined use of independently developed software components; (3) lack of agile yet rigorous software engineering practices for high-performance computing; and (4) failure to consider the entire lifecycle of large scientific software efforts, leading to fragile, complicated application codes that are increasingly difficult to enhance.

97 MATHEMATICS AND COMPUTING↗

Multi-dimensional modulation codes for fading channel

Some new codes are presented which have good performance on Rician fading channel with small decoding complexities. A new M-way partition chain is proposed for the L x MPSK (L less than or equal to M) signal set which maximizes the intra-set distance of each subset at each partition level. Based on this partition chain, a class of asymptotical optimum codes was found. For M = 4, these codes have both large symbol distances and product distances. Multi-level coding scheme allows to construct a code by hand such that the code meets some desired parameters, e.g., symbol distance, product distance, etc. In design of a multi-level code, all factors were considered which affect the performance and complexity of the code, such as, the decoding scheme, decoding complexity, and performance under the decoding scheme, e.g., if the multi-stage decoding scheme is used, the performance degradation due to the suboptimum decoding is taken into consideration. The performance for most of the presented codes was simulated on Rayleigh fading channel, and the results show that these codes have good performance with small decoding complexities.

Lin, Shu↗

Verification of Unstructured Grid Adaptation Components

Adaptive unstructured grid techniques have made limited impact on production analysis workflows where the control of discretization error is critical to obtaining reliable simulation results. Recent progress has matured a number of independent implementations of flow solvers, error estimation methods, and anisotropic grid adaptation mechanics. Known differences and previously unknown differences in grid adaptation components and their integrated processes are identified here for study. Unstructured grid adaptation tools are verified using analytic functions and the Code Comparison Principle. Three analytic functions with different smoothness properties are adapted to show the impact of smoothness on implementation differences. A scalar advection-diffusion problem with an analytic solution that models a boundary layer is adapted to test individual grid adaptation components. The scalar problems illustrate known differences in a grid adaptation component implementation and a previously unknown interaction between components. Laminar flow over a delta wing is verified with multiple, independent grid adaptation procedures to show consistent convergence to fine-grid forces and pitching moment.

Park, Michael A.↗

Measurement And Calculation of High-Energy Neutron Spectra Behind Shielding at the CERF 120-GeV/C Hadron Beam Facility

Neutron energy spectra were measured behind the lateral shield of the CERF (CERN-EU High Energy Reference Field) facility at CERN with a 120 GeV/c positive hadron beam (a mixture of mainly protons and pions) on a cylindrical copper target (7-cm diameter by 50-cm long). An NE213 organic liquid scintillator (12.7-cm diameter by 12.7-cm long) was located at various longitudinal positions behind shields of 80- and 160-cm thick concrete and 40-cm thick iron. The measurement locations cover an angular range with respect to the beam axis between 13 and 133{sup o}. Neutron energy spectra in the energy range between 32 MeV and 380 MeV were obtained by unfolding the measured pulse height spectra with the detector response functions which have been verified in the neutron energy range up to 380 MeV in separate experiments. Since the source term and experimental geometry in this experiment are well characterized and simple and results are given in the form of energy spectra, these experimental results are very useful as benchmark data to check the accuracies of simulation codes and nuclear data. Monte Carlo simulations of the experimental set up were performed with the FLUKA, MARS and PHITS codes. Simulated spectra for the 80-cm thick concrete often agree within the experimental uncertainties. On the other hand, for the 160-cm thick concrete and iron shield differences are generally larger than the experimental uncertainties, yet within a factor of 2. Based on source term simulations, observed discrepancies among simulations of spectra outside the shield can be partially explained by differences in the high-energy hadron production in the copper target.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study on the Tritium Behaviors in the VHTR System. Part 1: Development of Tritium Analysis Code for VHTR and Verification

A tritium permeation analyses code (TPAC) has been developed in Idaho National Laboratory (INL) by using MATLAB SIMULINK package for analysis of tritium behaviors in the VHTRs integrated with hydrogen production and process heat application systems. The modeling is based on the mass balance of tritium containing species and hydrogen (i.e., HT, H2, HTO, HTSO4, and TI) coupled with a variety of tritium source, sink, and permeation models. The code includes (1) tritium sources from ternary fission and neutron reactions with 6Li, 7Li 10B, 3He, (2) tritium purification system, (3) leakage of tritium with coolant, (4) permeation through pipes, vessels, and heat exchangers, (4) electrolyzer for high temperature steam electrolysis (HTSE), and (5) isotope exchange for SI process. Verification of the code has been performed by comparisons with the analytical solutions, the experimental data, and the benchmark code results based on the Peach Bottom reactor design. The results showed that all the governing equations are well implemented into the code and correctly solved. This paper summarizes all the background, the theory, the code structures, and some verification results related to the TPAC code development in Idaho National Laboratory (INL).

42 ENGINEERING↗