Search NASA⌕ Search

SEARCH · Search NASA

Results for “protons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Pitch angle dispersion of drifting energetic protons at synchronous orbit

The time of arrival at ATS 6 of substorm-associated energetic proton flux enhancements has been examined as a function of both energy and pitch angle by using electron-proton spectrometer data. The protons exhibit energy dispersion with the particles with the highest energy arriving first. This has generally been interpreted as evidence that these particles have gradient- and curvature-drifted to the spacecraft from an acceleration region on the nightside. In the evening quadrant, proton enhancements at 90 deg pitch angle arrived at the spacecraft prior to those at small pitch angles. However, on the dayside the increase occurs first at the smallest pitch angle (about 30 degrees). The difference between the arrival times of the 30 deg and 90 deg protons increases for more westward local times. For the highest energy range observed, drifting protons are rarely seen at large pitch angles. These observations place severe restrictions on the simple drift models. Since the pitch angle dependence of the particle drift velocity is a field geometric quantity, the observations require the modification of present magnetospheric magnetic field models. In particular, the models need to reproduce better the enhanced field observed on the dayside near synchronous orbit.

Walker, R. J.↗

Electron and proton absorption calculations for a graphite/epoxy composite model

The Bethe-Bloch stopping power relations for inelastic collisions were used to determine the absorption of electron and proton energy in cured neat epoxy resin and the absorption of electron energy in a graphite/epoxy composite. Absorption of electron energy due to bremsstrahlung was determined. Electron energies from 0.2 to 4.0 MeV and proton energies from 0.3 to 1.75 MeV were used. Monoenergetic electron energy absorption profiles for models of pure graphite, cured neat epoxy resin, and graphite/epoxy composites are reported. A relation is determined for depth of uniform energy absorption in a composite as a function of fiber volume fraction and initial electron energy. Monoenergetic proton energy absorption profiles are reported for the neat resin model. A relation for total proton penetration in the epoxy resin as a function of initial proton energy is determined. Electron energy absorption in the composite due to bremsstrahlung is reported. Electron and proton energy absorption profiles in cured neat epoxy resin are reported for environments approximating geosynchronous earth orbit.

Long, E. R., Jr.↗

Electronic properties of deep-level defects in proton irradiated AlGaAs-GaAs solar cells

Deep level transient spectroscopy and capacitance voltage techniques as well as analysis of the forward current voltage (I-V) characteristics and SEM-EIC data were carried out for proton irradiated GaAs solar cells over a wide range of proton energies and proton fluences. Defect and recombination parameters such as defect energy levels and density, carrier capture cross sections and lifetimes as well as diffusion lengths in the undoped n-GaAs LPE layers were determined. Good correlation between these defect parameters and solar cell performance parameters was obtained for GaAs solar cells irradiated by 200 and 290 KeV protons. It was found that 200 to 290 KeV protons will produce the most defects and damages to the GaAs solar cell structure used. The influence of the low temperature (200 to 400 C) periodic thermal annealing on the deep level defects and the performance of the 200 KeV proton irradiated cells is discussed.

Li, S. S.↗

Proton-induced noise in digicons

The Space Telescope, which carries four Digicons, will pass several times per day through a low-altitude portion of the radiation belt called the South Atlantic Anomaly. This is expected to create interference in what is otherwise anticipated to be a noise-free device. Two essential components of the Digicon, the semiconductor diode array and the UV transmitting window, generate noise when subjected to medium-energy proton radiation, a primary component of the belt. These trapped protons, having energies ranging from 2 to 400 Mev and fluences at the Digicon up to 4,000 P+/sec-sq cm, pass through both the window and the diode array, depositing energy in each. In order to evaluate the effect of these protons, engineering test models of Digicon tubes to be flown on the High Resolution Spectrograph were irradiated with low-flux monoenergetic proton beams at the University of Maryland cyclotron. Electron-hole pairs produced by the protons passing through the diodes or the surrounding bulk caused a background count rate. This is the result of holes diffusing over a distance of many diode spacings, causing counts to be triggered simultaneously in the output circuits of several adjacent diodes. Pulse-height spectra of these proton-induced counts indicate that most of the bulk-related counts overlap the single photoelectron peak. A geometrical model will be presented of the charge collection characteristics of the diode array that accounts for most of the observed effects.

Smith, L. C.↗

The Single Event Upset (SEU) response to 590 MeV protons

The presence of high-energy protons in cosmic rays, solar flares, and trapped radiation belts around Jupiter poses a threat to the Galileo project. Results of a test of 10 device types (including 1K RAM, 4-bit microP sequencer, 4-bit slice, 9-bit data register, 4-bit shift register, octal flip-flop, and 4-bit counter) exposed to 590 MeV protons at the Swiss Institute of Nuclear Research are presented to clarify the picture of SEU response to the high-energy proton environment of Jupiter. It is concluded that the data obtained should remove the concern that nuclear reaction products generated by protons external to the device can cause significant alteration in the device SEU response. The data also show only modest increases in SEU cross section as proton energies are increased up to the upper limits of energy for both the terrestrial and Jovian trapped proton belts.

Nichols, D. K.↗

Simulations of heavy ion heating by electromagnetic ion cyclotron waves driven by proton temperature anisotropies

Heating of heavy ions by the electromagnetic ion cyclotron (EMIC) waves, which are driven by proton temperature anisotropies, is studied by means of hybrid particle simulations. Initially, relaxation of the temperature anisotropies in the proton distribution and isotropic heating of the heavy ions are observed (phase I), followed by substantial perpendicular heating of the heavy ions (phase II). The heavy ions are distinctly gyrophase modulated by the EMIC waves. The isotropic heating in phase I is due to magnetic trapping by the excited proton cyclotron waves. The perpendicular heating in phase II is attributed to cyclotron resonance with the EMIC waves, which becomes possible by means of the preceding heating in phase I. Saturation of the EMIC instability is instead attributed to magnetic trapping of the majority ions: protons. When the proton anisotropy is very large, frequency shift (decrease) of the proton cyclotron waves to less than 1/2 Ohm(p) is observed. The present mechanism is not only relevant to He(+) heating in the dayside equator of the magnetosphere, but it also predicts hot He2(+) ions behind the earth's bow shock.

Tanaka, M.↗

Electron injection by relativistic protons in active galactic nuclei

It is shown that protons with Lorentz factors larger than about 1,000,000 are cooled very rapidly by collisions with soft photons in the environment of an AGN. If the energy distribution of accelerated protons is sufficiently flat, then most of the energy contained in relativistic protons will be transformed to pairs, and then to radiation. Under these conditions, proton cooling due to p-gamma interactions is much more important than energy losses due to inelastic proton-proton collisions.

Sikora, Marek↗

Simulation of proton-induced energy deposition in integrated circuits

A time-efficient simulation technique was developed for modeling the energy deposition by incident protons in modern integrated circuits. To avoid the excessive computer time required by many proton-effects simulators, a stochastic method was chosen to model the various physical effects responsible for energy deposition by incident protons. Using probability density functions to describe the nuclear reactions responsible for most proton-induced memory upsets, the simulator determines the probability of a proton hit depositing the energy necessary for circuit destabilization. This factor is combined with various circuit parameters to determine the expected error-rate in a given proton environment. An analysis of transient or dose-rate effects is also performed. A comparison to experimental energy-disposition data proves the simulator to be quite accurate for predicting the expected number of events in certain integrated circuits.

Fernald, Kenneth W.↗

Biological effectiveness of high-energy protons - Target fragmentation

High-energy protons traversing tissue produce local sources of high-linear-energy-transfer ions through nuclear fragmentation. The contribution of these target fragments to the biological effectiveness of high-energy protons using the cellular track model is examined. The effects of secondary ions are treated in terms of the production collision density using energy-dependent parameters from a high-energy fragmentation model. Calculations for mammalian cell cultures show that at high dose, at which intertrack effects become important, protons deliver damage similar to that produced by gamma rays, and with fragmentation the relative biological effectiveness (RBE) of protons increases moderately from unity. At low dose, where sublethal damage is unimportant, the contribution from target fragments dominates, causing the proton effectiveness to be very different from that of gamma rays with a strongly fluence-dependent RBE. At high energies, the nuclear fragmentation cross sections become independent of energy. This leads to a plateau in the proton single-particle-action cross section, below 1 keV/micron, since the target fragments dominate.

Cucinotta, Francis A.↗

Star tracker operation in a high density proton field

Algorithms that reject transient signals due to proton effects on charge coupled device (CCD) sensors have been implemented in the HDOS ASTRA-l Star Trackers to be flown on the TOPEX mission scheduled for launch in July 1992. A unique technique for simulating a proton-rich environment to test trackers is described, as well as the test results obtained. Solar flares or an orbit that passes through the South Atlantic Anomaly can subject the vehicle to very high proton flux levels. There are three ways in which spurious proton generated signals can impact tracker performance: the many false signals can prevent or extend the time to acquire a star; a proton-generated signal can compromise the accuracy of the star's reported magnitude and position; and the tracked star can be lost, requiring reacquisition. Tests simulating a proton-rich environment were performed on two ASTRA-1 Star Trackers utilizing these new algorithms. There were no false acquisitions, no lost stars, and a significant reduction in reported position errors due to these improvements.

Miklus, Kenneth J.↗

Lower hybrid turbulence at cometary bow wave and acceleration of cometary protons

The wave measurements at the spacecraft encounters with Comet Halley have shown intense wave activity at the lower hybrid frequency. The excitation of the lower hybrid instability by the pickup cometary ions (protons and water group) in the bow wave region and the quasi-linear diffusion of the ions in these fluctuations are discussed. The quasi-linear diffusion of the pickup protons takes place over a scale length shorter than that of the heavier water group ions. This enhances damping of the waves by protons, and when the pickup proton density is large enough, it can result in the saturation of the instability as this damping balances the heavy ion driven growth. The observed electric field amplitude and the scale length of proton relaxation are in agreement with the theory. For small pickup proton density the instability can saturate due to the wave energy cascade arising from the modulation instability of the large-amplitude lower hybrid waves. This saturation mechanism leads to electron acceleration and suprathermal tail formation.

Shapiro, V. D.↗

Contribution of proton-induced short range secondaries to the LET spectra on LDEF

The contribution to the LET (linear energy transfer) spectrum from proton-induced short range secondaries was investigated by making measurements of total track density and LET spectra in CR-39 Plastic Nuclear Track Detectors (PNTD's) at varying shielding depths in the A0015 West-side stack. Proton-induced short range secondaries were found to make a significant contribution to the LET spectra, especially in the region above 100 keV/micron. At present, calculational models do not include this component. Total track density was measured at five shielding depths and was seen to increase as a function of shielding. LET spectra were measured under two shielding depths (2.6 and 9.2 g/cm(exp 2)) and stayed fairly constant as a function of shielding. Prerecovery estimates of LET spectra dropped off rapidly in the 100-300 keV/micron region, while the measured LET spectra extended to higher LET's. Track density and LET spectra measurements of secondaries were made in a CR-39 PNTD stack exposed to 154 MeV accelerator protons. Similarities in LET spectra measured in the A0015 experiment and in the 154 MeV accelerator proton stack demonstrate that a useful first step in modeling the contribution to the LET spectra of secondaries induced by the spectrum of trapped protons would be to model a mono-energetic proton beam being transported through a one-dimensional geometry.

Benton, E. R.↗

Fission foil detector calibrations with high energy protons

Fission foil detectors (FFD's) are passive devices composed of heavy metal foils in contact with muscovite mica films. The heavy metal nuclei have significant cross sections for fission when irradiated with neutrons and protons. Each isotope is characterized by threshold energies for the fission reactions and particular energy-dependent cross sections. In the FFD's, fission fragments produced by the reactions are emitted from the foils and create latent particle tracks in the adjacent mica films. When the films are processed surface tracks are formed which can be optically counted. The track densities are indications of the fluences and spectra of neutrons and/or protons. In the past, detection efficiencies have been calculated using the low energy neutron calibrated dosimeters and published fission cross sections for neutrons and protons. The problem is that the addition of a large kinetic energy to the (n,nucleus) or (p,nucleus) reaction could increase the energies and ranges of emitted fission fragments and increase the detector sensitivity as compared with lower energy neutron calibrations. High energy calibrations are the only method of resolving the uncertainties in detector efficiencies. At high energies, either proton or neutron calibrations are sufficient since the cross section data show that the proton and neutron fission cross sections are approximately equal. High energy proton beams have been utilized (1.8 and 4.9 GeV, 80 and 140 MeV) for measuring the tracks of fission fragments emitted backward and forward.

Benton, E. V.↗

The proton cyclotron instability and the anisotropy/B inverse correlation

Spacecraft observations in the strongly compressed subsolar magnetosheath show an inverse correlation between the proton temperature anistrophy (T(sub perpendicular to p)/T(sub parallel to p) greater than 1 where perpendicular to and parallel to denote directions perpendicular and parallel to the background magnetic field) and the parallel proton beta (beta(sub parallel to p). This manuscript uses one-dimensional hybrid simulations of the proton cyclotron anisotropy instability in homogeneous electron-proton plasmas to study this correlation which may represent a limited closure relation for fluid theories of anisotropic space plasmas. The emphasis is on driven simulation which increase the temperature anisotropy by periodically reducing the magnetic-field-aligned velocities of the protons. The late-time states from ensembles of both initial value and driven simulations yield very similar expressions for the proton anisotropy/beta(sub parallel to P) inverse correlation, and provide a basis for explaining differences between sheath observations from different spacecraft. The driven simulations also yield expressions for the maximum instability growth rate and the fluctuating field energy as functions of beta (sub parallel to p) and a parameter characterizing the anisotropy driver.

Gary, S. Peter↗

Satellite Measured Solar Protons from 1963-1993 and Their Influence on Ozone in a Changing Stratosphere

The fluxes of solar protons have been measured by a series of Interplanetary Monitoring Platform (IMP) satellites since 1963. Eight IMP satellites have been launched since 1963 providing excellent coverage of solar protons with energies from a few MeV to several hundred MeV. IMP 8, launched in October 1973, continues to provide proton measurements, twenty-six and a half (26 1/2) years after launch. These high energy solar protons rain down on the earth's polar atmosphere sporadically, primarily during solar proton events (SPEs) which typically last a few days. Solar protons with energies of 30 MeV or greater are capable of reaching the stratosphere and causing increases in odd nitrogen (NO(y)) constituents at polar latitudes ($>$ 60 degrees geomagnetic) which last for several months to years past the events. These enhanced NO(y) species can lead to significant upper stratospheric ozone depletions $ greater than $10\% during the gigantic SPEs that occurred in August 1972 and October 1989. We studied the effects of SPEs on the stratosphere from 1963 to the mid 1990s. During this time period, the stratospheric chlorine levels changed from relatively small in 1963 ($\sim$ 1 ppbv) to fairly substantial amounts in the mid-1990s ($\sim$ 3.3 ppbv). Our recently improved two-dimensional chemistry and transport atmospheric model was used to compute the effects of SPEs in this changing stratosphere. The long-lived SPE-produced NO(y) constituents were transported to lower stratospheric levels during winter after the events and caused impacts in the middle and lower stratosphere. Generally, the SPEs resulted in a decrease in ozone. However, during periods of high halogen loading these impacts resulted in interference with the chlorine and bromine loss cycles for ozone destruction. This interference actually led to a predicted total ozone increase that was especially notable in the time period 1992-4, a few years after the October 1989 SPE.

Jackman, Charles H.↗

Proton Aurora Dynamics in Response to the IMF and Solar Wind Variations

On May 23, 2000, proton auroras observed by IMAGE (Imager for Magnetopause to Aurora Global Exploration) FUV (Far Ultraviolet) on the dayside were very dynamic. Auroral pattern in the cusp is well correlated with Interplanetary Magnetic Field (IMF) and solar wind parameters. When IMF were northward, cusp proton aurora appeared at high latitude poleward from the auroral oval. A high-latitude proton aurora brightened after solar wind ion temperature increased and it disappeared after IMF turned southward. Under the southward IMF condition, auroral activity occurred only in the dayside auroral oval. As IMF $B_z$ reverted to northward, cusp proton aurora reappeared at high latitude. The magnetic local time of the cusp proton aurora changes with the IMF $B_y$ polarity, consistent with previous reports. These results suggest an upstream source of the high-latitude cusp proton aurora for this event. One possible explanation is that bow shock energetic ions are transported into the cusp via the high-latitude magnetic merging process to induce optical emissions in the ionosphere.

Chang, S.↗

Long-term Measurements of Solar Proton Fluxes (1963-present) and the Subsequent Impact on Stratospheric Constituents

The fluxes of solar protons have been measured by satellites for over forty years (1963-present). Eight Interplanetary Monitoring Platform (IMP) satellites measured solar proton fluxes from 1963-1993 and five NOAA Geostationary Operational Environmental Satellites (GOES) were used for the period 1994present. These high energy solar protons precipitate on the Earth's polar atmosphere sporadically, especially during solar proton events (SPEs), which typically last a few days. Solar protons with energies greater than 30 MeV are capable of reaching the stratosphere and causing increases in odd hydrogen (HOx) and odd nitrogen (NOy) constituents at polar latitudes (greater than 60 degrees geomagnetic). The enhanced HOx leads to short-lived ozone depletion (-days) due to the short lifetime of HOx constituents. The enhanced NOy leads to long-lived ozone changes because of the long lifetime of the NOy family in the stratosphere. Several very large SPEs (August 1972, August and October 1989, July and November 2000, September and November 2001, and October 2003) over the 1963-2004 time period were simulated in the GSFC two-dimensional chemistry and transport model and were predicted to cause significant polar upper stratospheric ozone depletion greater than 10%, which lasted for several weeks past the events. Several satellite instruments (BUV, SBUV, SBW/2, SAGE II, HALOE, etc.) have shown constituent changes as a result of SPEs. Long-term (greater than 40 year) model simulations of the influence of the solar protons and satellite measurements during and after some of the very large SPEs will be shown.

Jackman, Charles H.↗

Ionic Liquids and New Proton Exchange Membranes for Fuel Cells

There is currently a great surge of activity in fuel cell research as laboratories across the world seek to take advantage of the high energy capacity provided by &el cells relative to those of other portable electrochemical power systems. Much of this activity is aimed at high temperature fie1 cells, and a vital component of such &el cells must be the availability of a high temperature stable proton-permeable membrane. NASA Glenn Research Center is greatly involved in developing this technology. Other approaches to the high temperature fuel cell involve the use of single- component or almost-single-component electrolytes that provide a path for protons through the cell. A heavily researched case is the phosphoric acid fuel cell, in which the electrolyte is almost pure phosphoric acid and the cathode reaction produces water directly. The phosphoric acid fie1 cell delivers an open circuit voltage of 0.9 V falling to about 0.7 V under operating conditions at 170 C. The proton transport mechanism is mainly vehicular in character according to the viscosity/conductance relation. Here we describe some Proton Transfer Ionic Liquids (PTILs) with low vapor pressure and high temperature stability that have conductivities of unprecedented magnitude for non-aqueous systems. The first requirement of an ionic liquid is that, contrary to experience with most liquids consisting of ions, it must have a melting point that is not much above room temperature. The limit commonly suggested is 100 C. PTILs constitute an interesting class of non-corrosive proton-exchange electrolyte, which can serve well in high temperature (T = 100 - 250 C) fuel cell applications. We will present cell performance data showing that the open circuit voltage output, and the performance of a simple H2(g)Pt/PTIL/Pt/O2(g) fuel cell may be superior to those of the equivalent phosphoric acid electrolyte fuel cell both at ambient temperature and temperatures up to and above 200 C. My work at NASA Glenn Research Center during this summer is to develop and characterize proton exchange membranes doped with ionic liquids. The main techniques used to characterize these materials are: Impedance Spectroscopy, NMR, DSC, TGA, DMA, IR, and SEM ...

Belieres, Jean-Philippe↗