Search NASA⌕ Search

SEARCH · Search NASA

Results for “rapid development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Biomass to Gasoline and Diesel Using Integrated Hydropyrolysis and Hydroconversion

Cellulosic and woody biomass can be directly converted to hydrocarbon gasoline and diesel blending components through the use of integrated hydropyrolysis plus hydroconversion (IH 2 ). The IH 2 gasoline and diesel blending components are fully compatible with petroleum based gasoline and diesel, contain less than 1% oxygen and have less than 1 total acid number (TAN). The IH 2 gasoline is high quality and very close to a drop in fuel. The DOE funding enabled rapid development of the IH 2 technology from initial proof-of-principle experiments through continuous testing in a 50 kg/day pilot plant. As part of this project, engineering work on IH 2 has also been completed to design a 1 ton/day demonstration unit and a commercial-scale 2000 ton/day IH 2 unit. These studies show when using IH 2 technology, biomass can be converted directly to transportation quality fuel blending components for the same capital cost required for pyrolysis alone, and a fraction of the cost of pyrolysis plus upgrading of pyrolysis oil. Technoeconomic work for IH 2 and lifecycle analysis (LCA) work has also been completed as part of this DOE study and shows IH 2 technology can convert biomass to gasoline and diesel blending components for less than $2.00/gallon with greater than 90% reduction in greenhouse gas emissions. As a result of the work completed in this DOE project, a joint development agreement was reached with CRI Catalyst Company to license the IH 2 technology. Further larger-scale, continuous testing of IH 2 will be required to fully demonstrate the technology, and funding for this is recommended. The IH 2 biomass conversion technology would reduce U.S. dependence on foreign oil, reduce the price of transportation fuels, and significantly lower greenhouse gas (GHG) emissions. It is a breakthrough for the widespread conversion of biomass to transportation fuels.

09 BIOMASS FUELS↗

A Workflow-based Intelligent Network Data Movement Advisor with End-to-end Performance Optimization

Next-generation eScience applications often generate large amounts of simulation, experimental, or observational data that must be shared and managed by collaborative organizations. Advanced networking technologies and services have been rapidly developed and deployed to facilitate such massive data transfer. However, these technologies and services have not been fully utilized mainly because their use typically requires significant domain knowledge and in many cases application users are even not aware of their existence. By leveraging the functionalities of an existing Network-Aware Data Movement Advisor (NADMA) utility, we propose a new Workflow-based Intelligent Network Data Movement Advisor (WINDMA) with end-to-end performance optimization for this DOE funded project. This WINDMA system integrates three major components: resource discovery, data movement, and status monitoring, and supports the sharing of common data movement workflows through account and database management. This system provides a web interface and interacts with existing data/space management and discovery services such as Storage Resource Management, transport methods such as GridFTP and GlobusOnline, and network resource provisioning brokers such as ION and OSCARS. We demonstrate the efficacy of the proposed transport-support workflow system in several use cases based on its implementation and deployment in DOE wide-area networks.

97 MATHEMATICS AND COMPUTING↗

Assessment of Factors Influencing Effective CO 2 Storage Capacity and Injectivity in Eastern Gas Shales

Building upon advances in technology, production of natural gas from organic-rich shales is rapidly developing as a major hydrocarbon supply option in North America and around the world. The same technology advances that have facilitated this revolution - dense well spacing, horizontal drilling, and hydraulic fracturing - may help to facilitate enhanced gas recovery (EGR) and carbon dioxide (CO 2 ) storage in these formations. The potential storage of CO 2 in shales is attracting increasing interest, especially in Appalachian Basin states that have extensive shale deposits, but limited CO 2 storage capacity in conventional reservoirs. The goal of this cooperative research project was to build upon previous and on-going work to assess key factors that could influence effective EGR, CO 2 storage capacity, and injectivity in selected Eastern gas shales, including the Devonian Marcellus Shale, the Devonian Ohio Shale, the Ordovician Utica and Point Pleasant shale and equivalent formations, and the late Devonian-age Antrim Shale. The project had the following objectives: (1) Analyze and synthesize geologic information and reservoir data through collaboration with selected State geological surveys, universities, and oil and gas operators; (2) improve reservoir models to perform reservoir simulations to better understand the shale characteristics that impact EGR, storage capacity and CO 2 injectivity in the targeted shales; (3) Analyze results of a targeted, highly monitored, small-scale CO 2 injection test and incorporate into ongoing characterization and simulation work; (4) Test and model a smart particle early warning concept that can potentially be used to inject water with uniquely labeled particles before the start of CO 2 injection; (5) Identify and evaluate potential constraints to economic CO 2 storage in gas shales, and propose development approaches that overcome these constraints; and (6) Complete new basin-level characterizations for the CO 2 storage capacity and injectivity potential of the targeted eastern shales. In total, these Eastern gas shales cover an area of over 116 million acres, may contain an estimated 6,000 trillion cubic feet (Tcf) of gas in place, and have a maximum theoretical storage capacity of over 600 million metric tons. Not all of this gas in-place will be recoverable, and economics will further limit how much will be economic to produce using EGR techniques with CO 2 injection. Reservoir models were developed and simulations were conducted to characterize the potential for both CO 2 storage and EGR for the target gas shale formations. Based on that, engineering costing and cash flow analyses were used to estimate economic potential based on future natural gas prices and possible financial incentives. The objective was to assume that EGR and CO 2 storage activities would commence consistent with the historical development practices. Alternative CO 2 injection/EGR scenarios were considered and compared to well production without CO 2 injection. These simulations were conducted for specific, defined model areas in each shale gas play. The resulting outputs were estimated recovery per typical well (per 80 acres), and the estimated CO 2 that would be injected and remain in the reservoir (i.e., not produced), and thus ultimately assumed to be stored. The application of this approach aggregated to the entire area of the four shale gas plays concluded that they contain nearly 1,300 Tcf of both primary production and EGR potential, of which an estimated 460 Tcf could be economic to produce with reasonable gas prices and/or modest incentives. This could facilitate the storage of nearly 50 Gt of CO 2 in the Marcellus, Utica, Antrim, and Devonian Ohio shales.

03 NATURAL GAS↗

Development of an Accelerated Microbial Procedure (Final Report)

Cool-roof coating technologies make buildings more energy efficient, reducing energy consumption as well as air pollution in temperate and hot climates. The performance of a cool roof can diminish significantly when exposed to adverse environmental agents such as dust, soot, and pollens as well as microorganisms. There is currently no equivalent method to accelerate testing of cool roof erformance. We developed an experimental procedure to test cool roof samples using a defined mixture of both photoautotrophic and heterotrophic microorganisms that would produce an equivalent, faster test for biodeterioration. The mixture consists of 6 bacterial, 3 algal, and 4 fungal species suspended in rich media. Microbial biofilms developed rapidly on the coating surface. Any cool-roof technology could be tested using this microbial aging procedure. If the surface of a material is accessible to the microbial mixture, the growth of a microbial biofilm could reduce the solar reflectance to less than 50% of its initial value within 2 months. Thus, it completes the test cycle required by the ENERGY STAR ® program in only 2 months instead of 3 years by the biofilm alone.

14 SOLAR ENERGY↗

The Transportation Leapfrog: Using Smart Phones to Collect Driving Data and Model Fuel Economy in India

Car ownership in India is expected to skyrocket in the coming decades, strongly driven by rising incomes. This phenomenon provides unprecedented opportunities for automakers and equally unprecedented social and environmental challenges. Policymakers, urban planners and civil society see this car boom leading to an explosion in problems related to congestion, infrastructure, air pollution, safety, higher oil imports and climate change. For all these stakeholders to take effective action, good data on how people use their cars, their demand for mobility and their behavior in mobility is essential. Unfortunately, there is very little data on the Indian transport sector as a whole and virtually none on real-world vehicle performance and use. The rapid development of high quality mobile telecommunications infrastructure provides India with the opportunity to leapfrog the West in cheaply collecting vast amounts of useful data from transportation. In this paper, we describe a pilot project in which we use commercial smart phone apps to collect per second car driving data from the city of Pune, instantly upload it through 3G and prepare it for analysis using advanced noise filtering algorithms for less than $1 per day per car. We then use our data in an Autonomie simulation to show that India’s currently planned fuel economy test procedures will result in over-estimates of fuel economy of approximately 35% for a typical Indian car when it is operated in real world conditions. Supporting better driving cycle development is just one of many applications for smart phone derived data in Indian transportation.

25 ENERGY STORAGE↗

Scalable Parallel Methods for Analyzing Metagenomics Data at Extreme Scale

The field of bioinformatics and computational biology is currently experiencing a data revolution. The exciting prospect of making fundamental biological discoveries is fueling the rapid development and deployment of numerous cost-effective, high-throughput next-generation sequencing technologies. The result is that the DNA and protein sequence repositories are being bombarded with new sequence information. Databases are continuing to report a Moore’s law-like growth trajectory in their database sizes, roughly doubling every 18 months. In what seems to be a paradigm-shift, individual projects are now capable of generating billions of raw sequence data that need to be analyzed in the presence of already annotated sequence information. While it is clear that data-driven methods, such as sequencing homology detection, are becoming the mainstay in the field of computational life sciences, the algorithmic advancements essential for implementing complex data analytics at scale have mostly lagged behind. Sequence homology detection is central to a number of bioinformatics applications including genome sequencing and protein family characterization. Given millions of sequences, the goal is to identify all pairs of sequences that are highly similar (or “homologous”) on the basis of alignment criteria. While there are optimal alignment algorithms to compute pairwise homology, their deployment for large-scale is currently not feasible; instead, heuristic methods are used at the expense of quality. In this dissertation, we present the design and evaluation of a parallel implementation for conducting optimal homology detection on distributed memory supercomputers. Our approach uses a combination of techniques from asynchronous load balancing (viz. work stealing, dynamic task counters), data replication, and exact-matching filters to achieve homology detection at scale. Results for a collection of 2.56M sequences show parallel efficiencies of ~75-100% on up to 8K cores, representing a time-to-solution of 33 seconds. We extend this work with a detailed analysis of single-node sequence alignment performance using the latest CPU vector instruction set extensions. Preliminary results reveal that current sequence alignment algorithms are unable to fully utilize widening vector registers.

59 BASIC BIOLOGICAL SCIENCES↗

Prediction and Characterization of Heat-Affected Zone Formation due to Neighboring Nickel-Aluminum Multilayer Foil Reaction

Reactive multilayer foils have the potential to be used as local high intensity heat sources for a variety of applications. Much of the past research effort concerning these materials have focused on understanding the structure-property relationships of the foils that govern the energy released during a reaction. To enhance the ability of researchers to more rapidly develop technologies based on reactive multilayer foils, a deeper and more predictive understanding of the relationship between the heat released from the foil and microstructural evolution in the neighboring materials is needed. This work describes the development of a numerical model for the purpose of evaluating new foil-substrate combinations for screening and optimization. The model is experimentally validated using a commercially available Ni-Al multilayer foils and different alloys.

36 MATERIALS SCIENCE↗

Collaborative Research: Improving Decadal Prediction of Arctic Climate Variability and Change Using a Regional Arctic

This project developed and applied a regional Arctic System model for enhanced decadal predictions. It built on successful research by four of the current PIs with support from the DOE Climate Change Prediction Program, which has resulted in the development of a fully coupled Regional Arctic Climate Model (RACM) consisting of atmosphere, land-hydrology, ocean and sea ice components. An expanded RACM, a Regional Arctic System Model (RASM), has been set up to include ice sheets, ice caps, mountain glaciers, and dynamic vegetation to allow investigation of coupled physical processes responsible for decadal-scale climate change and variability in the Arctic. RASM can have high spatial resolution (~4-20 times higher than currently practical in global models) to advance modeling of critical processes and determine the need for their explicit representation in Global Earth System Models (GESMs). The pan-Arctic region is a key indicator of the state of global climate through polar amplification. However, a system-level understanding of critical arctic processes and feedbacks needs further development. Rapid climate change has occurred in a number of Arctic System components during the past few decades, including retreat of the perennial sea ice cover, increased surface melting of the Greenland ice sheet, acceleration and thinning of outlet glaciers, reduced snow cover, thawing permafrost, and shifts in vegetation. Such changes could have significant ramifications for global sea level, the ocean thermohaline circulation and heat budget, ecosystems, native communities, natural resource exploration, and commercial transportation. The overarching goal of the RASM project has been to advance understanding of past and present states of arctic climate and to improve seasonal to decadal predictions. To do this the project has focused on variability and long-term change of energy and freshwater flows through the arctic climate system. The three foci of this research are: - Changes in the freshwater flux between arctic climate system components resulting from decadal changes in land and sea ice, seasonal snow, vegetation, and ocean circulation. - Changing energetics due to decadal changes in ice mass, vegetation, and air-sea interactions. - The role of small-scale atmospheric and oceanic processes that influence decadal variability. This research has been addressing modes of natural climate variability as well as extreme and rapid climate change. RASM can facilitate studies of climate impacts (e.g., droughts and fires) and of ecosystem adaptations to these impacts.

58 GEOSCIENCES↗

Feedstock Interface Fy2017 Q3 Report

This report summarized the results obtained in FY2017 Q3 of a collaborative effort between researchers at NREL, PNNL, and INL to develop rapid screening methods and models to predict the fact pyrolysis conversion performance of a range of biomass materials.

09 BIOMASS FUELS↗

The MidAmerica Regional Microgrid Education and Training (MARMET) Consortium

The primary goal of this project was to integrate cutting-edge research and advanced instructional methods to create a flexible, evolving approach to microgrid and distributed energy resources training for all levels of student. This goal entailed the rapid development of modular material to capture and reflect the newest trends in electric power microgrid engineering and to make it available in traditional and non-traditional settings. It was our goal to develop course material that can be readily integrated into either existing courses or organized into new courses. The target audiences include technicians, contractors and consultants, inspectors, policy makers, supervisors, and engineers and undergraduate and graduate students. The main project objectives were to: 1) Perform a gap analysis to identify the research/educational/training needs and define specific implementation plans for these activities in distributed technology and Smart Grid power engineering by working with Department of Energy, the National Network Administrator (NNA) and other Distributed Technology Training Consortia (DTTC). 2) Develop learning content related to, and driven by, microgrid research, consisting of one or more multimedia-based modules. Over the life of the project MARMET provided training to 11,012 students and developed 154,432 contact hours of material (see the IREC NNA, DE-EE0006342, final project report for added details on MARMET evaluation and assessment metrics, as well as an overview of the entire GEARED network. 3) Provide a variety of delivery mechanisms and venues for face-to-face and on-line instruction in power system engineering and related smart grid operations, including university-based courses, short courses, and workshops. 4) Assemble and engage highly-qualified advisory and steering committees of experts from utilities, universities, national laboratories, and product suppliers for this DTTC, to guide and advise the activities of the DTTC, and to assist in creating student internships, coops, research projects and academic competitions for GEARED students within the DTTC and nationally. 5) Convene regular meetings of Consortia partners to disseminate research results among the participants (universities, utilities, and industry). 6) Develop recruitment mechanisms to publicize GEARED student opportunities and highlight the educational benefits of GEARED participation to assure long-term sustainability of student recruitment and retention. 7) Participate in GEARED National Network activities to identify and adopt best practices across all GEARED consortia. 8) Organize, host and manage at least one annual Student-Centered Research Conference on behalf of the GEARED Network during the period of performance; participate in each annual national Student-Centered Research Conference.

14 SOLAR ENERGY↗

Swift/T Guide

Swift/T is a hierarchical, parallel programming system that allows you to rapidly develop many-task workflows that call into sequential code concurrently. It is implemented with a compiler and runtime system; the Swift/Turbine Compiler (STC) allows you to write Swift programs and run them using Turbine. At runtime, Swift/T programs are MPI programs capable of utilizing very large supercomputers.

97 MATHEMATICS AND COMPUTING↗

Life Cycle Inventory of Current Photovoltaic Module Recycling Processes in Europe

Solar photovoltaic (PV) installations must be properly dismantled and any waste treated and disposed at the end of project life. However, because most of the world's nearly 400 GW of PV systems have been built in the past decade - each expected to operate for between 20 and 30 years - current PV module waste volumes do not yet justify widespread operation of PV recycling facilities. The necessary policies and technologies for recycling PV systems are currently under rapid development. With modifications to the European waste electrical and electronic equipment directive (WEEE 2012/19/EU) in 2012, take back and recycling of PV modules is, in fact, already mandatory in Europe. There, take back and recycling is currently performed in small but annually-increasing quantities. Even though waste treatment is considered part of a module's life cycle, only a few life cycle inventories (LCI) of energy and materials flows are available for the industrial recycling processes that are used today to recycle crystalline silicon-based (c-Si) PV modules. LCI are the data inputs that inform lifecycle assessments which quantify the environmental impacts across the full life cycle of PV modules - from manufacturing and use to end of life. To help progress the industry forward, a survey of European recyclers was performed to characterize existing commercial recycling processes and share associated life cycle inventory data. System Boundaries: The reference unit, or "functional unit" in the vocabulary of life cycle assessment, is defined as the processing of one metric ton of crystalline silicon PV modules in recycling lines for laminated glass, metals, and electronic wastes. Today, all modules are processed in discrete batches, yet not metered at that scale. Thus the process energy for a batch is estimated based on scaled annual production data as well as on input and output streams.

14 SOLAR ENERGY↗

Magnetic Reconnection in High-Energy Density Laboratory Plasmas

This project involved theoretical research on radiative magnetic reconnection in High-Energy Density (HED) plasmas, with applications to laboratory laser-plasma experiments [on facilities like OMEGA (LLE) and NIF (LLNL)] and to astrophysical systems, such as accreting black hole coronae and magnetospheres of strongly magnetized neutron stars (magnetars and pulsars). Relativistic magnetic reconnection is a leading candidate mechanism for powering high-energy flares and persistent emission in various astrophysical systems.The extremely high energy density found in many of these systems dictates that reconnection should proceed in the radiative regime, where radiation back reaction on the electrons (and, if present, positrons), manifested, e.g., as radiative cooling and radiative drag on reconnection-driven bulk flows, plays an important role. Moreover, under some conditions, the energy of the emitted photons is so high that they can readily produce electron-positron pairs, e.g., in black-hole accretion disk coronae and in pulsar and magnetar magnetospheres. Due to recent rapid developments of experimental capabilities in HED physics, we can now for the first time seriously contemplate studying these exciting physical processes in the laboratory. This project investigated fundamental physics of magnetic reconnection in this novel regime, by performing several computational [using radiative particle-in-cell (PIC) simulations] and theoretical studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microstructural Modification and Healing of Additively Manufactured Parts by Electropulsing

For many applications, the promises of additive manufacturing (AM) of rapid development cycles and fabrication of ready-to-use, geometrically-complex parts cannot be realized because of cumbersome thermal postprocessing. This postprocessing is necessary when the nonequilibrium microstructures produced by AM lead to poor material properties. This study investigated if electropulsing, the process of sending high-current-density electrical pulses through a metallic part, could be used to modify the material properties of AM parts. This process has been used to modify conventional wrought materials but has never been applied to AM materials. Two representative AM materials were examined: 316L stainless steel and A1Si10Mg. Two hours of annealing are needed to remove chemical microsegregation in AM 316L; using electropulsing, this was accomplished in 200 seconds. The ductility of AlSil0Mg parts was increased above that of the as-built material using electropulsing. This study demonstrated that electropulsing can be used to modify the microstructures of AM metals.

36 MATERIALS SCIENCE↗

Characterization of oceanic post-cold frontal clouds and their model representation. Final report

Low-level clouds are ubiquitous over the oceans, and their impact on the Earth’ radiative budget is important. However, general circulation models (GCMs) that are used to represent our climate and its evolution still experience problems to represent their correct amount and radiative impact. In the extratropical latitudes (~30-60 N/S), cloud properties are strongly modulated by the occurrence of anti-cyclones (high pressure systems) and cyclones (low pressure systems). While deep clouds dominate in cyclones near the center and along the cold and warm fronts, low-level clouds populate the colder regions of the cyclones, and more specifically the region in the wake of the cold fronts, the post-cold frontal region (PCF). The GCMs mentioned above were found to underestimate the amount of these PCF clouds, and this caused errors in their representation of the amount of solar radiation at the surface of the southern hemisphere oceans, causing an excess in absorption and errors in long-term predictions. To better understand which processes are ill-represented in the GCMs to cause such issues, we used ground-based observations from the Eastern North Atlantic (ENA) ARM site and a high resolution regional model (called WRF) to examine the properties of PCF clouds. With the WRF model, we simulated the passage of a cold front at the ENA site using theoretically distinct representations of convection and the physics of the boundary layer. While these physical representations had little impact on the timing, structure and circulation of the cold front, we found a high sensitivity to how the large scale information was fed into the model. Errors rapidly developed if the incoming flow information was injected too far from the site, but 1000 km was found to be an optimal distance between the outer boundary and the ENA site for a realistic cold front passage. With this model, we then conducted a series of experiment where convection and boundary layer schemes were changed, and revealed that 1) the clouds were more sensitive to the convection than boundary layer schemes and 2) the interaction between the two has a large impact. Furthermore, changing the representation of the physics in the model had greater impacts on PCF clouds than changing the initial conditions. As large-scale models increase their spatial resolution, convection will eventually be resolved but it remains that their representation of the physics of the boundary layer will matter for the correct representation of shallow (low-level) clouds. Observations were used to find which large-scale information had a clear relationship with PCF cloud and precipitation properties, in view of helping with GCM parameterizations and evaluation. Both lower troposphere stability and surface forcing were found to be important for PCF clouds that experience more vigorous dynamics than their tropical or subtropical counterparts. For cloud base and top heights, a simple measure of the change in potential temperature between the surface and the 800 hPa was found to be a good predictor. This relationship was found to hold as well when using data from campaigns recently conducted in the southern ocean south of Tasmania. A recent GCM was found to succeed in representing similar relations. For cloud depth, water content, and different characteristics of precipitation both the temperature contrast between the surface and near-air and the near-surface wind speed had a strong relationship. To summarize, through observational constraints and regional model experiments, the project has provided guidance to evaluate GCMs and tools to improve their representation of low-level clouds in the extratropics. It has also highlighted differences in behavior between these clouds and those typically found in the subtropics, thus opening new avenues of research for shallow clouds in general.

54 ENVIRONMENTAL SCIENCES↗

Assessment of High Gamma Prime Ni-base Superalloy Processability, Geometric Accuracy, and Component Fabricability (CRADA NFE-17-06955 Final Report)

Additive manufacturing (AM), also known as 3D printing, is a rapidly developing technology with tremendous potential in both developmental and production applications. Solar Turbines Incorporated is committed to AM technology for gas turbine applications. The ability to metal 3D print novel designs of turbine blades capable of actual turbine engine operation would effectively reduce design validation cycle time and allow acquisition of key performance data early in a design campaign. In support of Solar’s advanced manufacturing development and ongoing engine efficiency improvement goals, Solar initiated a project to print a full set of Mercury TM 50 stage 2 turbine blades to be run in a development engine, with this Phase 1 program to demonstrate feasibility for fabrication of the geometry from the non-weldable Ni-base superalloy through electron beam melting (EBM).

36 MATERIALS SCIENCE↗

Spotlight: Quantum Information Science and Technology

U.S. stakeholders from academia, industry, and government recognize the need for the United States to cement itself as a technology leader in the coming quantum economy. Our national investments in quantum technology must keep pace with those of other countries to secure a significant share of future markets and the associated economic opportunities. This spotlight document showcases DOE's efforts in the arena of Quantum Information Science & Technology, highlighting significant public-private engagements, DOE programs, and funding opportunities designed to keep America at the fore of this rapidly developing suite of technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Physics-Informed Machine Learning for Epidemiological Models

One challenge of using compartmental SEIR models for public health planning is the difficulty in manually tuning parameters to capture behavior reflected in the real-world data. This team conducted initial, exploratory analysis of a novel technique to use physics-informed machine learning tools to rapidly develop data-driven models for physical systems. This machine learning approach may be used to perform data assimilation of compartment models which account for unknown interactions between geospatial domains (i.e. diffusion processes coupling across neighborhoods/counties/states/etc.). Results presented here are early, proof-of-concept ideas that demonstrate initial success in using a physically informed neural network (PINN) model to assimilate data in a compartmental epidemiology model. The results demonstrate initial success and warrant further research and development.

60 APPLIED LIFE SCIENCES↗