Search NASA⌕ Search

SEARCH · Search NASA

Results for “small structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Astrophysical manifestations of clumps of cold dark matter

Small-scale structures (clumps) of dark matter may manifest themselves owing to the annihilation of dark-matter particles in them as pointlike gamma-ray sources. In view of this, investigation into respective effects on the basis of data on unidentified pointlike gamma-ray sources is of importance. It is shown that the existing uncertainties in the description of physical properties of dark-matter particles (their annihilation cross section) and in the distribution of their density in the clumps are of crucial importance; therefore, an analysis of data from the observation of pointlike gamma-ray sources makes it possible to impose constraints on the values of respective uncertain parameters (that is, to single out preferable ones). It is considered that the rate of annihilation of dark-matter particles in the clumps may be enhanced both owing to a higher density and owing to the growth of the cross section at low relative velocities of dark-matter particles in the clumps. In particular, dark-matter particles may have self-interaction of the Coulomb type, and this leads to the enhancement of the annihilation rate because of the Sommerfeld-Sakharov effect. It is shown that the heavy-neutrino model featuring an extra interaction can explain partly Fermi and EGRET data on unidentified pointlike gamma-ray sources. It is indicated that the motion of gamma-ray sources over the celestial sphere can be noticed for several clumps within several years of observations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

CFDbuilder

Computational Fluid Dynamics is an important area in scientific computing where, despite the use of multi-threading, obtaining good performance at each core is still extremely challenging. The challenges are primarily due to memory bandwidth limitations and difficulties in using short SIMD engines effectively. One strategy to improve in-core performance involves using a hierarchical data layout made of small cubical structures of the problem states that can fit well in the cache hierarchy. Even for such a hierarchical data layout, finite-differencing equations can be easily expressed but at the expense of some inefficiency. The transformations to overcome the inefficiencies are highly tedious and error-prone. Therefore, we built a source-to-source translator called CFDbuilder to automate the transformations using directives. We see up to 6.92x performance improvement with one of our advection codes using such an approach. We believe such an approach could enable library and application writers to build efficient CFD libraries.

Lin, Pei-Hung↗
DOE OSTI2021

Toward a Theory of the Evolution of Drop Morphology and Splintering by Freezing

Abstract The drop freezing process is described by a phase-field model. Two cases are considered: when the freezing is triggered by central nucleation and when nucleation occurs on the drop surface. Depending on the environmental temperature and drop size, different morphological structures develop. Detailed dendritic growth was simulated at the first stage of drop freezing. Independent of the nucleation location, a decrease in temperature within the range from ~−5° to −25°C led to an increase in the number of dendrites and a decrease in their width and the interdendritic space. At temperatures lower than about −25°C, a planar front developed following surface nucleation, while dendrites formed a granular-like structure with small interdendritic distances following bulk nucleation. An ice shell grew in at the same time (but slower) as dendrites following surface nucleation, while it started forming once the dendrites have reached the drop surface in the case of central nucleation. The formed ice morphology at the first freezing stage predefined the splintering probability. We assume that stresses needed to break the ice shell arose from freezing of the water in the interdendritic spaces. Under this assumption, the number of possible splinters/fragments was proportional to the number of dendrites, and the maximum rate of splintering/fragmentation occurred within a temperature range of about −10° to −20°C, is in agreement with available laboratory and in situ measurements. At temperatures < −25°C, freezing did not lead to the formation of significant stresses, making splintering unlikely. The number of dendrites increased with drop size, causing a corresponding increase in the number of splinters. Examples of morphology that favors drop cracking are presented, and the duration of the freezing stages is evaluated. Sensitivity of the freezing process to the surface fluxes is discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Physical response of gold nanoparticles to single self-ion bombardment

The reliability of nanomaterials depends on maintaining their specific sizes and structures. However, the stability of many nanomaterials in radiation environments remains uncertain due to the lack of a fully developed fundamental understanding of the radiation response on the nanoscale. To provide an insight into the dynamic aspects of single ion effects in nanomaterials, gold nanoparticles (NPs) with nominal diameters of 5, 20, and 60 nm were subjected to self-ion irradiation at energies of 46 keV, 2.8 MeV, and 10 MeV in situ inside of a transmission electron microscope. Ion interactions created a variety of far-from-equilibrium structures including small (~1 nm) sputtered nanoclusters from the parent NPs of all sizes. Single ions created surface bumps and elongated nanofilaments in the 60 nm NPs. As a result, similar shape changes were observed in the 20 nm nanoparticles, while the 5 nm nanoparticles were transiently melted or explosively broken apart.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2011

Feet on the potential energy surface, head in the pi clouds

This work presents explorations of the potential energy surface of clusters of atoms and of the interactions between molecules. First, structures of small aluminum clusters are examined and classified as ground states, transition states, or higher-order saddle points. Subsequently, the focus shifts to dispersion-dominated π-π interactions when the potential energy surfaces of benzene, substituted benzene, and pyridine dimers are explored. Because DNA nucleotide bases can be thought of as substituted heterocycles, a natural extension of the substituted benzene and pyridine investigations is to model paired nucleotide bases. Finally, the success of the dispersion studies inspires the development of an extension to the computational method used, which will enable the dispersion energy to be modeled – and the potential energy surface explored – in additional chemical systems. The effective fragment potential (EFP) method is described, as well as various quantum mechanical methods. An ab inito quantum mechanical study of 13-atom aluminum clusters is described. EFP studies of aromatic dimers are reported in which dispersion energy makes a significant contribution to the attraction between monomers. Theory and code development toward a means of computing dispersion energy in mixed ab inito-EFP systems are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Narrow band laser source for efficient 3 He polarization

Polarized 3 He is widely in polarized neutron scattering as neutron polarizers or analyzers. Increasing 3 He polarization can improve both neutron polarization and transmission which are important for any polarized neutron experiments. Here at the US, 3 Hee is usually polarized using spin-exchange optical pumping (SEOP), where 3 He gains polarization via spin-exchange collisions with laser pumped alkali metals, typically rubidium (Rb) and potassium (K). Over the last two decades, 3 He polarization has improved from around 50% to around 80% due to the application of spectral narrowed diode lasers which narrows the laser linewidth from 2 nm to between 0.2 nm and 0.3 nm. However, the highest 3 He polarization achieved so far is limited to about 85%. The mechanism behind this is still not well understood, but it is suspected that a laser with an ultra-narrow linewidth and lower broadband background may further improve the 3 He polarization. In addition, if we define the spin-exchange efficiency as the ratio of the rate at which the polarized 3 He is produced to the rate at which the alkali atom polarization is lost through various collisions, K has much higher spin-exchange efficiency than Rb does. In principle, direct pumping of K should improve both the pumping efficiency and the production rate of polarized 3 He. However, because of the small fine structure splitting in K (D1 770 nm, D2 766.7 nm), the laser used to pump K needs to have a ultra-narrow spectrum tuned at 770 nm and minimal broadband background as the pumping of the K D2 transition will reduce the pumping efficiency. Such a laser is not readily available. Therefore, the current practice of polarizing 3 He is through a hybrid SEOP method in which the laser tuned at Rb D1 transition (795 nm) polarizes Rb first and then Rb transfers its polarization to K. This hybrid method takes advantages of the more accessible 795 nm laser and gains some pumping efficiency. But to realize the full potential in SEOP, direct pumping of K would be necessary. The new Optigrate laser provides a tool to investigate the impact on the pumping efficiency and achievable 3 He polarization under the condition of ultra-narrow spectrum and very low background.

3He polarizing filters↗
DOE OSTI2022

High Performance Computing to Quantify the Evolution of Microscopic Concentration Gradients During Flash Processing

During the Flash process, the cross section of a plain-carbon or a low-alloy steel is austenitized through rapid heating and transformed on rapid cooling to a predominantly martensite + bainite structure with small amounts of retained austenite. Unlike conventional heat treating, homogeneity is intentionally avoided during Flash processing of steels. The Flash process assembly consists of a pair of rolls that transfer the steel sheets through the heating and cooling stage of the thermal cycle. The initial microstructure of the steel consists of ferrite (body-centered cubic iron) + carbide ((Fe,X)mCn) mixture. The heating rate through the peak temperature is a function of temperature and reaches a peak of about 300-400°C/s and the cooling rate has a maximum value of 3,000-4,000°C/s. The on-heating phase transformations include carbide dissolution, austenite (face-centered cubic iron) nucleation and growth, and diffusion of carbon and other substitutional elements in the steel. The on-cooling phase transformations include formation of martensite (body-centered tetragonal phase containing supersaturated solute) and bainite (ferrite plates with or without fine carbides). In this project, the focus is on Fe-C-Cr steels that are currently Flash processed for armor applications. The modeling effort proposed here will help optimize the Flash thermal cycle for these low alloy steels to achieve the target performance, which is an ongoing effort at SFP Works. A significant feature of Flash processed Fe-C-Cr steels is the presence of scatter in the through-thickness in the sheet. The variability in hardness results from a variability in the bainite + martensite microstructure that is sensitive to the local chemical concentration of C and Cr. Such a chemical inhomogeneity is intentionally obtained in the Flash process. Although such a microstructural gradient is presumably responsible for the exceptional properties of the Flash processed steel, it is very important to quantify the gradients as a function of Flash variabilities in processing parameters and the input microstructure. Understanding the mechanistic pathway that leads to microstructural gradients could be ground-breaking and instrumental for achieving better process control and optimized microstructural state to meet application-specific strength-ductility requirements. Since the final microstructure depends on setting up precise solute concentration gradients through a rapid heating process, and transforming these regions into various phases, it is important to understand how small changes in steel chemistry, input microstructure (carbide size and distribution), and process variables (Flash thermal cycle) will impact the solute concentration gradients.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Robust Dark Energy Constraints with the Dark Energy Spectroscopic Survey (Final Technical Report)

This project developed and applied advanced theoretical, computational, and data-analysis methodologies to extract robust and precise cosmological constraints from the Dark Energy Spectroscopic Instrument (DESI). The work focused on maximizing the scientific return of DESI through optimized survey strategy, novel higher-order clustering statistics, improved modeling of small-scale structure, and rigorous mitigation of observational systematics. Over the award period, the project made substantial contributions to DESI science planning, produced new methods for bispectrum and three-point correlation function analyses, advanced constraints on primordial non-Gaussianity, and delivered widely used software tools. The project also played a major role in training graduate students and a postdoctoral researcher who contributed directly to DESI key projects. The results have significantly enhanced the cosmological reach of DESI and provide a strong foundation for future surveys such as DESI-II and Stage-V experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Materials Characterization, Prediction, and Control Project: Characterization of 316L Stainless Steel after Solid Phase Processing using Ultrasonic NDE Method

The Pacific Northwest National Laboratory undertook the Materials Characterization, Prediction, and Control Laboratory Directed Research and Development Project to advance understanding of nuclear material processing and enable multifold acceleration in the development and qualification of new material systems produced via advanced manufacturing methods, such as solid phase processing, for use in national security and advanced energy applications (Smith 2021). A motivation of the Materials Characterization, Prediction, and Control Project was to demonstrate ultrasonic testing as a nondestructive evaluation method to complement traditional destructive methods for characterizing material microstructure with emphasis on grain size determination using a method that may have future applications for real-time inline process monitoring. The objective of the work described in this report is to establish the process and an analysis method for measuring grain sizes of polycrystalline metals with ultrafine grains using ultrasonic shear wave backscattering, building on prior studies on coarser-grained material. The work involves five tasks: Measured ultrasonic backscattering experimentally for a series of 316L stainless steel specimens with various grain sizes made by friction stir processing. Calculated ultrasonic backscattering coefficients from experimental data based on a physical measurement model. Measured ground truth grain sizes of the specimens from electron backscatter diffraction grain boundary images using a generalization of the ASTM E112 (ASTM 2021) intercept method. Built a curve of ultrasonic backscattering coefficients versus the ground truth intercept-based grain sizes to determine the correlation between mean grain sizes and ultrasonic measurements. Demonstrated the ability of using the correlation curve to deduce grain sizes with measured ultrasonic backscattering coefficients for a few 316L stainless steel specimens whose grain sizes were unknown beforehand but were targeted to be an extrapolation to larger grain sizes than used to formulate the correlation curves. Experimental procedures and computational algorithms are developed and validated for these tasks. This work establishes an ultrasonic technique for characterizing material microstructure with ultrafine grains that are often resulted by solid-phase processing. The technique is nondestructive, and it has the potential to be used for real time inline process monitoring. This work successfully demonstrates the viability of an ultrasonic nondestructive evaluation method for microstructural characterization of material having ultrafine grain structure (as small as 1?mm) and produced by an advanced manufacturing method. This includes a demonstration of the method to extrapolate to other conditions. While not demonstrated here, the method is expected to be viable for in-line, or near-inline, process monitoring in advanced manufacturing applications with suitable consideration for access of instrumentation to the material being manufactured.

316 L Stainless Steel↗
DOE OSTI2026

Sifting for a Stream: The Morphology of the $300S$ Stellar Stream

Stellar streams are sensitive laboratories for understanding the small-scale structure in our Galaxy’s gravitational field. Here, we analyze the morphology of the $300S$ stellar stream, which has an eccentric, retrograde orbit and thus could be an especially powerful probe of both baryonic and dark substructures within the Milky Way. Due to extensive background contamination from the Sagittarius stream (Sgr), we perform an analysis combining Dark Energy Camera Legacy Survey photometry, $Gaia$ DR3 proper motions, and spectroscopy from the Southern Stellar Stream Spectroscopic Survey (S 5 ). We redetermine the stream coordinate system and distance gradient, then apply two approaches to describe $300S$ ’s morphology. In the first, we analyze stars from $Gaia$ using proper motions to remove Sgr. In the second, we generate a simultaneous model of $300S$ and Sgr based purely on photometric information. Both approaches agree within their respective domains and describe the stream over a region spanning 33° . Overall, $300S$ has three well-defined density peaks and smooth variations in stream width. Furthermore, $300S$ has a possible gap of ~4.7 and a kink. Dynamical modeling of the kink implies that $300S$ was dramatically influenced by the Large Magellanic Cloud. This is the first model of $300S$ ’s morphology across its entire known footprint, opening the door for deeper analysis to constrain the structures of the Milky Way.

Milky Way galaxy↗
DOE OSTI2019

Recalling and Updating Research on Diamagnetic Cavities: Experiments, Theory, Simulations

In the decade from the mid 80's to the mid 90's there was considerable interest in the generation of diamagnetic cavities produced by the sub-Alfvenic expansion of heavy ions across a background magnetic field. Examples included the AMPTE and CRRES barium releases in the magnetotail and magnetosphere as well as laser experiments at various laboratories in the United States and the Soviet Union. In all of these experiments field-aligned striations and other small-scale structures were produced as the cavities formed. Local and non-local linear theory as well as full particle (PIC), hybrid, and Hall-MHD simulations (mostly 2-D) were developed and used to understand at least qualitatively the features of these experiments. Furthermore, much of this review is a summary of this work, with the addition of some new 3-D PIC and Hall-MHD simulations that clarify old issues associated with the origin and evolution of cavities and their surface features. In the last part of this review we discuss recent extensions of the earlier efforts: new space observations of cavity-like structures as well as new laboratory experiments and calculations with greatly improved diagnostics of cavities formed by expansions of laser-produced ions at super-Alfvenic speeds both across and along the background magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Identification of Kelvin-Helmholtz generated vortices in magnetised fluids

The Kelvin-Helmholtz Instability (KHI), arising from velocity shear across the magnetopause, plays a significant role in the viscous-like transfer of mass, momentum, and energy from the shocked solar wind into the magnetosphere. While the KHI leads to growth of surface waves and vortices, suitable detection methods for these applicable to magnetohydrodynamics (MHD) are currently lacking. A novel method is derived based on the well-established λ-family of hydrodynamic vortex identification techniques, which define a vortex as a local minimum in an adapted pressure field. The J × B Lorentz force is incorporated into this method by using an effective total pressure in MHD, including both magnetic pressure and a pressure-like part of the magnetic tension derived from a Helmholtz decomposition. The λ MHD method is shown to comprise of four physical effects: vortical momentum, density gradients, fluid compressibility, and the rotational part of the magnetic tension. A local three-dimensional MHD simulation representative of near-flank magnetopause conditions (plasma β’s 0.5 – 5 and convective Mach numbers M f ∼ 0.4) under northward interplanetary magnetic field (IMF) is used to validate λ MHD . Analysis shows it correlates well with hydrodynamic vortex definitions, though the level of correlation decreases with vortex evolution. Overall, vortical momentum dominates λ MHD at all times. During the linear growth phase, density gradients act to oppose vortex formation. By the highly nonlinear stage, the formation of small-scale structures leads to a rising importance of the magnetic tension. Compressibility was found to be insignificant throughout. Finally, a demonstration of this method adapted to tetrahedral spacecraft observations is performed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Investigation of the Impact of Cross-Polymerization on the Structural and Frictional Properties of Alkylsilane Monolayers Using Molecular Simulation

Cross-linked chemisorbed n-alkylsilane (CH3(CH2)n-1Si(OH)3) monolayers on amorphous silica surfaces have been studied and their structural properties and frictional performance were compared to those of equivalent monolayers without cross-linkages. The simulations isolated for the first time the effects of both siloxane cross-linkages and the fraction of chains chemisorbed to the surface, providing insight into a longstanding fundamental question in the literature regarding molecular-level structure. The results demonstrate that both cross-linkages and the fraction of chemisorbed chains affect monolayer structure in small but measurable ways, particularly for monolayers constructed from short chains; however, these changes do not appear to have a significant impact on frictional performance.

Materials Science molecular dynamics↗
DOE OSTI2016

ANISOTROPY IN COSMIC-RAY ARRIVAL DIRECTIONS IN THE SOUTHERN HEMISPHERE BASED ON SIX YEARS OF DATA FROM THE ICECUBE DETECTOR

The IceCube Neutrino Observatory accumulated a total of 318 billion cosmic-ray-induced muon events between 2009 May and 2015 May. This data set was used for a detailed analysis of the sidereal anisotropy in the arrival directions of cosmic rays in the TeV to PeV energy range. The observed global sidereal anisotropy features large regions of relative excess and deficit, with amplitudes of the order of 10{sup 3} up to about 100 TeV. A decomposition of the arrival direction distribution into spherical harmonics shows that most of the power is contained in the low-multipole ( ℓ ≤ 4) moments. However, higher multipole components are found to be statistically significant down to an angular scale of less than 10°, approaching the angular resolution of the detector. Above 100 TeV, a change in the morphology of the arrival direction distribution is observed, and the anisotropy is characterized by a wide relative deficit whose amplitude increases with primary energy up to at least 5 PeV, the highest energies currently accessible to IceCube. No time dependence of the large- and small-scale structures is observed in the period of six years covered by this analysis. The high-statistics data set reveals more details of the properties of the anisotropy and is potentially able to shed light on the various physical processes that are responsible for the complex angular structure and energy evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Consistent SPH Simulations of Protostellar Collapse and Fragmentation

We study the consistency and convergence of smoothed particle hydrodynamics (SPH) as a function of the interpolation parameters, namely the number of particles N, the number of neighbors n, and the smoothing length h, using simulations of the collapse and fragmentation of protostellar rotating cores. The calculations are made using a modified version of the GADGET-2 code that employs an improved scheme for the artificial viscosity and power-law dependences of n and h on N, as was recently proposed by Zhu et al., which comply with the combined limit N→∞, h→0, and n→∞ with n/N→0 for full SPH consistency as the domain resolution is increased. We apply this realization to the “standard isothermal test case” in the variant calculated by Burkert and Bodenheimer and the Gaussian cloud model of Boss to investigate the response of the method to adaptive smoothing lengths in the presence of large density and pressure gradients. The degree of consistency is measured by tracking how well the estimates of the consistency integral relations reproduce their continuous counterparts. In particular, C {sup 0} and C {sup 1} particle consistency is demonstrated, meaning that the calculations are close to second-order accuracy. As long as n is increased with N, mass resolution also improves as the minimum resolvable mass M{sub min}∼n{sup −1}. This aspect allows proper calculation of small-scale structures in the flow associated with the formation and instability of protostellar disks around the growing fragments, which are seen to develop a spiral structure and fragment into close binary/multiple systems as supported by recent observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Last Journey. II. SMACC—Subhalo Mass-loss Analysis Using Core Catalogs

Here we introduce Subhalo Mass-loss Analysis using Core Catalogs (SMACC). SMACC adds a mass model to substructure merger trees based on halo "core tracking." Our approach avoids the need for running expensive subhalo finding algorithms and instead uses subhalo mass-loss modeling to assign masses to halo cores. We present details of the SMACC methodology and demonstrate its excellent performance in describing halo substructure and its evolution. Validation of the approach is carried out using cosmological simulations at significantly different resolutions. We apply SMACC to the 1.24-trillion-particle Last Journey simulation and construct core catalogs with the additional mass information. These catalogs can be readily used as input to semianalytic models or subhalo abundance matching approaches to determine approximate galaxy distributions, as well as for in-depth studies of small-scale structure evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Electromagnetic Signatures from the Tidal Tail of a Black Hole—Neutron Star Merger

Black hole - neutron star (BH-NS) mergers are a major target for ground-based gravitational wave observatories. A merger can also produce an electromagnetic counterpart (a kilonova) if it ejects neutron-rich matter that assembles into heavy elements through r-process nucleosynthesis. We study the kilonova signatures of the unbound dynamical ejecta of a BH-NS merger. We take as our initial state the results from a numerical relativity simulation and then use a general relativistic hydrodynamics code to study the evolution of the ejecta with parameterized r-process heating models. The unbound dynamical ejecta is initially a flattened, directed tidal tail largely confined to a plane. Heating from the r-process inflates the ejecta into a more spherical shape and smooths its small-scale structure, though the ejecta retains its bulk directed motion. We calculate the electromagnetic signatures using a 3D radiative transfer code and a parameterized opacity model for lanthanide-rich matter. The light curve varies with viewing angle because of two effects: asphericity results in brighter emission for orientations with larger projected areas, while Doppler boosting results in brighter emission for viewing angles more aligned with the direction of bulk motion. For typical r-process heating rates, the peak bolometric luminosity varies by a factor of ~3 with orientation while the peak in the optical bands varies by ~3 magnitudes. The spectrum is blueshifted at viewing angles along the bulk motion, which increases the V-band peak magnitude to ~-14 despite the lanthanide-rich composition.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Milky Way Satellite Census. IV. Constraints on Decaying Dark Matter from Observations of Milky Way Satellite Galaxies

Abstract We use a recent census of the Milky Way (MW) satellite galaxy population to constrain the lifetime of particle dark matter (DM). We consider two-body decaying dark matter (DDM) in which a heavy DM particle decays with lifetime τ comparable to the age of the universe to a lighter DM particle (with mass splitting ϵ ) and to a dark radiation species. These decays impart a characteristic “kick velocity,” V kick = ϵ c , on the DM daughter particles, significantly depleting the DM content of low-mass subhalos and making them more susceptible to tidal disruption. We fit the suppression of the present-day DDM subhalo mass function (SHMF) as a function of τ and V kick using a suite of high-resolution zoom-in simulations of MW-mass halos, and we validate this model on new DDM simulations of systems specifically chosen to resemble the MW. We implement our DDM SHMF predictions in a forward model that incorporates inhomogeneities in the spatial distribution and detectability of MW satellites and uncertainties in the mapping between galaxies and DM halos, the properties of the MW system, and the disruption of subhalos by the MW disk using an empirical model for the galaxy–halo connection. By comparing to the observed MW satellite population, we conservatively exclude DDM models with τ < 18 Gyr (29 Gyr) for V kick = 20 kms −1 (40 kms −1 ) at 95% confidence. These constraints are among the most stringent and robust small-scale structure limits on the DM particle lifetime and strongly disfavor DDM models that have been proposed to alleviate the Hubble and S 8 tensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗