Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Nonequilibrium Phase Chemistry in High Temperature Structure Alloys

Titanium and nickel aluminides of nonequilibrium microstructures and in thin gauge thickness were identified, characterized and produced for potential high temperature applications. A high rate sputter deposition technique for rapid surveillance of the microstructures and nonequilibrium phase is demonstrated. Alloys with specific compositions were synthesized with extended solid solutions, stable dispersoids, and specific phase boundaries associated with different heat treatments. Phase stability and mechanical behavior of these nonequilibrium alloys were investigated and compared.

Wang, R.↗
DOE OSTI2022

Phase stability, mechanical properties, and ion irradiation effects in face-centered cubic CrFeMnNi compositionally complex solid-solution alloys at high temperatures

We report two CrFeMnNi face-centered cubic complex concentrated solid-solution alloys (CSA) have been evaluated for phase stability, mechanical properties, and radiation damage effects from heavy ions. Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 were predicted by thermodynamic calculations to phase separate and maintain a single phase at 700 °C, respectively. Aging experiments at this temperature confirmed varying degrees of precipitation of a body-centered cubic phase in both Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 . The alloys showed promising strength in tensile deformation at room temperature, with yield strengths of 155 MPa and 151 MPa for Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe3 5 Mn 15 Ni 35 , respectively. At 500 °C, the yield strength of Cr 18 Fe 27 Mn 27 Ni 28 fell to 93 MPa, and to 100 MPa in Cr 15 Fe3 5 Mn 15 Ni 35 . Unlike Cr 18 Fe 27 Mn 27 Ni 28 , Cr 15 Fe 35 Mn 15 Ni 35 gained some ductility at 500 °C compared to room temperature. The two CSAs were irradiated to 75 dpa at 500 °C in the plateau region of the displacement curve using 3.7 MeV Ni 2+ ions, alongside model alloy 709 as a reference. Irradiation results produced similar densities and sizes of dislocations loops in the two CSAs compared to the reference. However, while large voids form in the plateau region of Cr 18 Fe 27 Mn 27 Ni 28 , small voids form just beyond the displacement peak of Cr 15 Fe 35 Mn 15 Ni 35 . Atom probe tomography and energy dispersive X-ray spectroscopy-equipped scanning transmission electron microscopes were used to characterize the alloys for changes in chemical distribution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

“Teamwork Makes the Dream Work”: Tribal Competition Evolutionary Search as a Surrogate for Free-Energy-Based Structural Predictions

Crystal structure prediction has been a grand challenge in material science owing to the large configurational space that one must explore. Evolutionary (genetic) algorithms coupled with first principles calculations are commonly used in crystal structure prediction to sample the ground and metastable states of materials based on configurational energies. However, crystal structure predictions at finite temperature (T), pressure (P), and composition (X) require a free-energy-based search that is often computationally expensive and tedious. Here in this paper, we introduce a new machine-learning workflow for structure prediction that is based on a concept inspired by the evolution of human tribes in primitive society. Our tribal genetic algorithm (GA) combines configurational sampling with evolutionary optimization to accurately predict entropically stabilized phases at finite (T, P, X), at a computational cost that is an order of magnitude smaller than that required for a free-energy-based search. In a departure from standard GA techniques, the populations of individuals are divided into multiple tribes based on a bond-order fingerprint, and genetic operations are modified to ensure that cluster configurations are sampled adequately to capture entropic contributions. Team competition introduced into the evolutionary process allows winning teams (representing a better set of individuals) to expand their sizes; this translates into a more expanded search of the phase space allowing us to explore solutions near possible global minimum. Each team explores a specific section of the structural phase space and avoids bias on solutions arising from the use of individual populations in a purely energy-based search. We demonstrate the efficacy of our approach by performing the structural prediction of a representative two-dimensional two-body system as well as Lennard-Jones clusters over a range of temperatures up to its melting point. Our approach outperforms the standard GA approaches and enables structural search under “real nonambient conditions” on both bulk systems and finite-sized clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Calorimetric study of skutterudite (CoAs2.92) and heazlewoodite (Ni3S2)

Abstract Nickel and cobalt arsenides, sulfarsenides, and sulfides occur in many hydrothermal ore deposits, but their thermodynamic properties are not well known, in some cases not known at all. In this work, we determined a full set of thermodynamic properties for heazlewoodite and skutterudite. Both phases were synthesized in evacuated silica tubes at elevated temperatures, and electron microprobe analyses gave their compositions as Ni3S2 and CoAs2.92, respectively. Enthalpies of formation were measured by high-temperature oxide-melt solution calorimetry. The reference phases were pure elements, thus eliminating any systematic errors related to such phases. The enthalpies of formation at T = 298.15 K and P = 105 Pa are –216.0 ± 8.4(2σ) and –88.2 ± 6.1 kJ·mol−1 for Ni3S2 and CoAs2.92, respectively. Entropies were calculated from low-temperature heat capacity (CP) data from relaxation (PPMS) calorimetry and are 133.8 ± 1.6 and 106.4 ± 1.3 J·mol–1·K–1, respectively. The calculated Gibbs free energies of formation are –210.0 ± 8.4 and –79.9 ± 6.2 kJ·mol−1 for Ni3S2 and CoAs2.92, respectively. The PPMS CP data, together with a set of differential scanning calorimetry measurements, were used to derive CP polynomials up to 700 K with the Kieffer model based on previously published frequencies of acoustic and optic modes. Equilibrium constants for selected reactions with an aqueous phase were calculated up to 700 K. Geochemical modeling in these systems, however, should await until more reliable data for other phases from the system Co-Ni-As-S are available.

Geochemistry & Geophysics↗
NASA NTRS1972

Study of X-ray diffraction on aging alloys with different degrees of volume discrepancy between the precipitation phase and the matrix

Study of the diffraction patterns of X rays diffracted by dispersion-hardened alloys with various degrees of difference between the specific atomic volumes of their precipitation phases and matrices. Experiments were performed on aging alloys KhN77TIuR (nimonic) and KhN67VMTIuO, which have the same types of gamma solid solutions and precipitating gamma prime phases, but differ considerably with respect to the volume factor. It is found that in the decay of supersaturated solid solutions for which the difference between the specific atomic volumes of the precipitation phase and the matrix is small (alloy KhN67VMTIuO) the nature of the intensity distribution of the diffraction lines remains practically unchanged regardless of the aging, while in cases where the volume discrepancy is large (alloy KhN77TIuR) significant changes in the appearance of the diffraction lines are recorded.-

Gitgarts, M. I.↗
DOE OSTI2020

Effect of Mg Content in Melt-Spun Mn–Bi–Mg–Sb–In Alloys on the Structure and Properties of Field-Annealed Magnets

Mn-Bi alloys modified with Mg and other elements were recently developed into promising rare-earth-free permanent magnets through successive melt-spinning, warm compaction, and short magnetic-field annealing. This letter reports herein on the crystal structures, texture, and magnetic properties observed in Mn 50 Bi 49-x Mg x Sb 0.5 In 0.5 alloys (x = 0, 1.5, 3.0, 4.5) throughout these processing steps. The Mg substitution favors MnBi-based intermetallic phases over the Bi- and Mn-based solid solutions and the stable α intermetallic phase over the metastable β' intermetallic phase. Magnesium increases the c/a ratio of the α phase lattice parameters for all studied x values and it increases the degree of the field-annealing-induced texture for x ≤ 3. The effect of Mg on coercivity is explained as combination of a positive one via the α phase magnetocrystalline anisotropy and a negative one via the development of texture. The effect of the substitution on the maximum energy product additionally involves the decreasing density of the alloys; the optimum x is found to be ≈3. Additionally reported are the thermal properties of selected alloys. The mechanism of field-annealing effect on the coercivity is briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Variation of the Passive Film on Compositionally Concentrated Dual-Phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 and Implications for Corrosion

The passive film on a dual-phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 FCC + Heusler (L2 1 ) compositionally concentrated alloy formed during extended exposure to an applied potential in the passive range in dilute chloride solution was characterized. Each phase, with its own distinct composition of passivating elements, formed unique passive films separated by a heterophase interface. High-resolution, surface sensitive characterization enabled chemical analysis of the passive film formed over individual phases. The film formed over the L2 1 phase had a higher concentration of Al, Ni, and Ti, while the film formed over FCC phase was of similar thickness but contained comparatively higher Cr, Fe, and Mo concentrations, consistent with the differences in bulk microstructure composition. The passive film was continuous across phase boundaries and the distribution of passivating elements (Al, Cr, and Ti) indicated both phases were independently passivated. Spatially resolved analysis of the surface chemistry of the dual-phase CCA revealed that the cation with the highest composition in passive film formed on the FCC phase was Cr (52.4 at. pct) and for the L2 1 phase was Ti (53.1 at. pct) despite the bulk concentration of each element being below 20 at. pct in their respective phases. Al, Cr, and Ti were enriched in both phases within the passive film relative to their respective bulk compositions. In parallel studies, single-phase alloys with compositions representative of the FCC and L2 1 phases were synthesized to evaluate the corrosion behavior of each phase in isolation. The corrosion behavior of the dual-phase alloy showed passivity evidenced by a pitting potential of 0.615 V SCE in 0.01 M NaCl. The pitting potential and other electrochemical parameters suggested a combination of behaviors of both single-phase samples, suggesting that the global corrosion behavior may be represented by a composite theory applied to phases, their area fractions, and interphase length. However, the interphase in the dual-phase CCA was a local corrosion initiation site and may limit localized corrosion protectiveness. The alloy design implications for optimization of second phase structure and morphology are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Ambient vapor sampling and selective cluster formation for the trace detection of tributyl phosphate via atmospheric flow tube mass spectrometry

In addition to serving as an f-element ligand and rare-earth method complexing agent, tributyl phosphate (TBP) is a compound containing core functional groups that mimic those routinely found in degradation products from industrial processes. Because detection of trace quantities of TBP can provide insight into the routes of contamination and degradation in the environment, there is a need to develop methods capable of detecting trace quantities of TBP. Vapor detection at atmospheric pressure is one approach that is both sensitive and rapid. We present here the use of atmospheric flow tube mass spectrometry (AFT-MS) for the ambient vapor sampling of TBP from headspace of ppb-level solutions in methanol. Gas phase clustering reactions were to enhance detection levels via the addition of small quantities of the dopants diethylamine (DEA), triethylamine (TEA), and pinacolyl methylphosphonate (PMP) in the vapor stream. Detection of the TBP vapor emanating from these solutions demonstrated a linear range for the protonated TBP species of 1-1000 ppb from solution. The clusters of TBP with DEA, TEA, and PMP each yielded linear ranges of 1-250 ppb for TBP in solution. Despite smaller linear ranges, the addition of these dopant species added a layer of analytical selectivity and reduced variability in signals from quality control samples. These data were obtained using an AFT source coupled to a linear ion trap mass spectrometer, which demonstrates the applicability of trapping systems to the AFT ionization technique while monitoring positive ions.

Ambient vapor sampling, Dielectric barrier dischar↗
DOE OSTI2025

Effect of vanadium on phase composition and hard magnetic properties of as-solidified and heat-treated Sm–Fe–(Ti,V) alloys

Although the intrinsic magnetic properties of Ti-stabilized Sm(Fe,Co,Ti) 12 compounds exhibit potential of excellent rare-earth-lean permanent magnets, it has been much easier to realize large coercivities with the isostructural compounds stabilized by either V or by certain combinations of Ti and V. To elucidate the influence of V on the microstructure and magnetic properties, a series of Sm 8.1 Fe 78.4 (Ti 1-x V x ) 13.5 alloys was studied after arc-melting and annealing at 850–1000 °C. The alloys were found to fall into three groups. For x ≤ 0.2, solidification generates mostly the Sm(Fe,Ti,V) 12 phase, but annealing converts at least part of it into the non-magnetic Sm(Fe,Ti,V) 11 and the magnetically soft Sm 2 (Fe,Ti,V) 17 phases. For 0.2 < x < 0.6, the alloys solidify into a near-equilibrium mixture of the Sm(Fe,Ti,V) 12 , TiFe 2 and Sm-rich phases. For x ≥ 0.6, solidification generates large fractions of α-Fe solid solution and Sm-rich phases; an annealing step is necessary to complete the formation of Sm(Fe,Ti,V) 12 phase. Also, for x ≥ 0.6 the temperature below which the Sm(Fe,Ti,V) 12 phase is stable decreases with x, as does the fraction of this phase formed during solidification. Here, the differences between these three groups of alloys suggest different strategies for developing hard magnetic properties, with the likelihood of a success increasing with increasing x. For x ≥ 0.6, heat treatment alone is demonstrated to generate a microstructure of micron and submicron Sm(Fe,Ti 1-x V x ) 12 crystallites separated by a Sm-rich phase and exhibiting a coercivity with values up to 3.5 and 5.7 kOe for x = 0.8 and 1.0, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ultrafast coherent motion and helix rearrangement of homodimeric hemoglobin visualized with femtosecond X-ray solution scattering

Ultrafast motion of molecules, particularly the coherent motion, has been intensively investigated as a key factor guiding the reaction pathways. Recently, X-ray free-electron lasers (XFELs) have been utilized to elucidate the ultrafast motion of molecules. However, the studies on proteins using XFELs have been typically limited to the crystalline phase, and proteins in solution have rarely been investigated. Here we applied femtosecond time-resolved X-ray solution scattering (fs-TRXSS) and a structure refinement method to visualize the ultrafast motion of a protein. We succeeded in revealing detailed ultrafast structural changes of homodimeric hemoglobin involving the coherent motion. In addition to the motion of the protein itself, the time-dependent change of electron density of the hydration shell was tracked. Besides, the analysis on the fs-TRXSS data of myoglobin allows for observing the effect of the oligomeric state on the ultrafast coherent motion.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A General Solution Route to Nanoporous Metal Oxide Films

Metal oxide semiconductors are of interest as efficient, stable, and low-cost photoanode materials for photoelectrochemical water splitting, but their characteristically poor charge transport properties remain a fundamental challenge to practical use. Nanoporous metal oxide films that feature open bicontinuous networks of nanocrystals and nanopores can overcome such inefficient charge transport to enable high-performance photoanodes. Here, this paper describes a general method to make high-quality nanoporous films of metal oxides by spin coating and calcining molecular inks that contain a porosity-generating block copolymer. Phase-pure nanoporous films of BiFeO 3 , FeWO 4 , WO 3 , Fe 2 O 3 , and TiO 2 serve to demonstrate the versatility of the approach. It is demonstrated that the crystallite size, film porosity, and film thickness can be independently tuned by adjusting the ink composition and film processing conditions. The method is extended to fabricate core–shell nanoporous films consisting of a nanoporous film coated in a thin shell of a second metal oxide, using WO 3 –BiVO 4 and BiFeO 3 –BiVO 4 as examples. Given its simplicity and flexibility, this solution-phase route should prove useful for making nanoporous films of many different materials for a variety of applications, including energy conversion and storage, catalysis, and chemical sensing.

coating materials↗
DOE OSTI2022

Probing ethane phase changes in bead pack via high-field NMR spectroscopy

Phase equilibria analysis in two-phase systems requires discernment of the individual phases as well as the interfacial region. The phase behavior of fluids in constraint geometries have been studied through several techniques. High-Field Nuclear Magnetic Resonance (HF-NMR) can be used to detect fluid phases, i.e. gas, liquid, or supercritical fluid, in the bulk or under confinement. In solution-state HF-NMR, each phase exhibits a distinct chemical shift that correlates to the phase density. In turn, the emergence of multimodal in NMR spectra reveals the coexistence of multiple phases in fluid systems. Our results for ethane show that HF-NMR can enable tracking phase changes in the bulk, but also in macro-scale (10–100's μm in pore size) porous systems at various pressure and temperature conditions, even when the system us out of equilibrium. Finally, these results creates potential opportunities to investigate phase changes influenced by confinement in porous systems, though additional steps are necessary.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

SAD phasing of XFEL data depends critically on the error model

A nonlinear least-squares method for refining a parametric expression describing the estimated errors of reflection intensities in serial crystallographic (SX) data is presented. This approach, which is similar to that used in the rotation method of crystallographic data collection at synchrotrons, propagates error estimates from photon-counting statistics to the merged data. Here, it is demonstrated that the application of this approach to SX data provides better SAD phasing ability, enabling the autobuilding of a protein structure that had previously failed to be built. Estimating the error in the merged reflection intensities requires the understanding and propagation of all of the sources of error arising from the measurements. One type of error, which is well understood, is the counting error introduced when the detector counts X-ray photons. Thus, if other types of random errors (such as readout noise) as well as uncertainties in systematic corrections (such as from X-ray attenuation) are completely understood, they can be propagated along with the counting error, as appropriate. In practice, most software packages propagate as much error as they know how to model and then include error-adjustment terms that scale the error estimates until they explain the variance among the measurements. If this is performed carefully, then during SAD phasing likelihood-based approaches can make optimal use of these error estimates, increasing the chance of a successful structure solution. In serial crystallography, SAD phasing has remained challenging, with the few examples of de novo protein structure solution each requiring many thousands of diffraction patterns. Here, the effects of different methods of treating the error estimates are estimated and it is shown that using a parametric approach that includes terms proportional to the known experimental uncertainty, the reflection intensity and the squared reflection intensity to improve the error estimates can allow SAD phasing even from weak zinc anomalous signal.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Delayed onset of discontinuous precipitation-based phase transformation in U10Mo alloys doped with Silicon

A uranium-10 wt% molybdenum (U-10Mo) alloy is one of the primary candidates for metallic fuels that would use low-enriched uranium in place of highly enriched uranium, to support nuclear nonproliferation efforts. Optimal performance of a U-based metallic nuclear fuel can be achieved by retaining the high-temperature, body-centered cubic (bcc) allotrope (γ-U) at room temperature, which can be accomplished in the U-10Mo alloy. However, presence of minor alloying elements can influence the final constitution of room-temperature phases in the U10Mo alloy, specifically, formation of α-U phase which results in anisotropic behavior of the fuel in reactor. Further, through a detailed transmission electron microscopy analysis, the present study reports the constituent phases that are present in a U10Mo alloy containing ~0.1 wt% Si after it is subjected to homogenization heat treatment and thermomechanical processing. For comparison, results from an undoped U10Mo alloy are also included. The experimental results reveal that γ-UMo solid solution is the major phase in a hot-rolled, Si-doped U10Mo alloy metallic fuel foil, along with U 2 MoSi 2 C, UC, and U 2 Mo, after isothermal annealing at 460 °C for 10h. In contrast, after the same heat treatment, the undoped U10Mo alloy metallic fuel had formed a noticeable amount of α-U along prior γ-UMo grain boundaries through discontinuous precipitation (DP, area fraction: ~27.9%) with characteristic lamellar morphology, together with γ-UMo, UC, and U 2 Mo. This result indicates that doping with Si could mitigate the DP reaction in U10Mo alloy and prevent formation of undesirable α-U. This work sheds light on optimizing Si-doping–dominated microstructure in U10Mo fuels and facilitates designing and tuning of microstructures of U10Mo alloys for tailoring the final designed performance of the fuel under irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Complexation of Pluronic L62 (EO 6 )–(PO 34 )–(EO 6 )/aerosol-OT (sodium bis(2-ethylhexyl)sulfosuccinate) in aqueous solutions investigated by small angle neutron scattering

Herein, we investigate the phase behaviours of Pluronic L62 in aqueous solution in the presence of aerosol-OT (AOT) molecules by small angle neutron scattering (SANS). The presence of AOT significantly changes the micellization phenomenon of L62 micelles in aqueous solution, including their critical micelle temperature (CMT), global size, and asphericity. The origin of these observations is attributed to the complexation between the neutral L62 surfactants and the ionic AOT molecules, which additionally provides charge to the mixed micelles: we analyse the data and extract meaningful information using the Ornstein–Zernike integral formalism. As a result, we observe that the co-micellization of L62 and AOT is very stable across a wide temperature range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

Studies on fuel spray characteristics in high-pressure environment

The present study deals with several issues involving the improvement of physical submodels and the computational efficiency in modeling dense fuel sprays. To improve the computational efficiency, a parcel PDF approach is implemented which can account for turbulent dispersion within each computational parcel. The advantage of a parcel PDF tracking method is to reduce the number of computational parcels representing the spray dynamics as well as to obtain grid-independent solutions for two-phase flows. To account for the dense spray effects, an existing drop collision and coalescence model, two breakup models, and a Reitz's wave instability model were used. These models were incorporated into a state-of-the-art multiphase all-speed transient flow solution procedure. Comparative performance for two breakup models as well as the turbulence modulation effects are also studied. Validation cases include the nonevaporating and evaporating solid-cone dense sprays. The predictions show a reasonably good agreement with available experimental results in terms of spray penetration, drop sizes, gas and drop mean velocities, and gas and drop rms velocities. The numerical results indicate that the present parcel PDF model has the capability of accurately representing drop dispersion in dense sprays with manageable number of computational parcels.

Shang, H. M.↗