Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Sheath constraints on turbulent magnetised plasmas

Abstract A solid target in contact with a plasma charges (negatively) to reflect the more mobile species (electrons) and thus keep the bulk plasma quasineutral. To shield the bulk plasma from the charged target, there is an oppositely (positively) charged sheath with a sharp electrostatic potential variation on the Debye length scale λ D . In magnetised plasmas where the magnetic field is inclined at an oblique angle α with the target, some of the sheath potential variation occurs also on the ion sound gyroradius length scale ρ S cos ⁡ α , caused by finite ion gyro-orbit distortion and losses. We consider a collisionless and steady-state magnetised plasma sheath whose thickness l ms ∼ max ( λ D , ρ S cos ⁡ α ) is smaller than the characteristic length scale L of spatial fluctuations in the bulk plasma, such that the limit l ms / L → 0 is appropriate. Spatial structures are assumed to be magnetic field-aligned. In the case of small magnetic field angle α ∼ δ ≡ ρ S / L ≪ 1 , electric fields tangential to the target transport ions towards the target via E × B drifts at a rate comparable to the one from parallel streaming. A generalised form of the kinetic Bohm–Chodura criterion at the sheath entrance is derived by requiring that the sheath electric field have a monotonic spatial decay far from the target. The criterion depends on tangential gradients of potential and ion distribution function, with additional nontrivial conditions.

kinetic Bohm–Chodura condition↗

Short-lived isomers in {sup 94}Rb

The medium-spin structure of the neutron-rich, odd-odd nucleus {sup 94}Rb was studied by means of {gamma}-ray spectroscopy. Excited levels were populated in the neutron-induced fission of {sup 235}U and in the spontaneous fission of {sup 252}Cf and {sup 248}Cm. Two isomeric states were found at 1485.2 and 2074.8 keV with half-lives of 18 and 107 ns, respectively. The probable structures of the two isomers involve the fully aligned, proton-neutron configurations [{pi}(g{sub 9/2}) x {nu}(g{sub 7/2})]{sub 8{sup +}} and [{pi}(g{sub 9/2}) x {nu}(h{sub 11/2})]{sub 10{sup -}}, respectively. These new data give information on the single-particle energies in the region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Chaperone-tip adhesin complex is vital for synergistic activation of CFA/I fimbriae biogenesis

Colonization factor CFA/I defines the major adhesive fimbriae of enterotoxigenic Escherichia coli and mediates bacterial attachment to host intestinal epithelial cells. The CFA/I fimbria consists of a tip-localized minor adhesive subunit, CfaE, and thousands of copies of the major subunit CfaB polymerized into an ordered helical rod. Biosynthesis of CFA/I fimbriae requires the assistance of the periplasmic chaperone CfaA and outer membrane usher CfaC. Although the CfaE subunit is proposed to initiate the assembly of CFA/I fimbriae, how it performs this function remains elusive. Here, we report the establishment of an in vitro assay for CFA/I fimbria assembly and show that stabilized CfaA-CfaB and CfaA-CfaE binary complexes together with CfaC are sufficient to drive fimbria formation. The presence of both CfaA-CfaE and CfaC accelerates fimbria formation, while the absence of either component leads to linearized CfaB polymers in vitro. We further report the crystal structure of the stabilized CfaA-CfaE complex, revealing features unique for biogenesis of Class 5 fimbriae.

59 BASIC BIOLOGICAL SCIENCES↗

Oxides related to cadmium telluride solar cells

Polycrystalline cadmium telluride (CdTe) is a leading material in photovoltaic technology due to its high absorption coefficient and near-optimum bandgap of 1.44 eV. It is known that CdTe film processing can promote surface oxidation depending on the growth environment and upon exposure to different oxidation conditions. For example, CdTeO3 forms when the CdTe film is treated in heated dry air, while in humid air, CdTe2O5 is detected. These oxides feature tellurium in the oxidation state +4 compared to the +2 state in CdTe. Other possible relevant oxides are CdO, TeO2, and TeO3. Using hybrid density functional calculations, we studied the electronic structure of these oxide materials and their band alignment to CdTe, which are essential parameters in the characterization of the interfaces at grain boundaries. The goal is to understand their stability and possible effects on passivating grain boundaries. The results are compared to the available experimental data.

14 SOLAR ENERGY↗

COLD MILKY WAY H i GAS IN FILAMENTS

We investigate data from the Galactic Effelsberg-Bonn H i Survey, supplemented with data from the third release of the Galactic All Sky Survey (GASS III) observed at Parkes. We explore the all-sky distribution of the local Galactic H i gas with |v{sub LSR}|<25 km s{sup −1} on angular scales of 11′–16′. Unsharp masking is applied to extract small-scale features. We find cold filaments that are aligned with polarized dust emission and conclude that the cold neutral medium (CNM) is mostly organized in sheets that are, because of projection effects, observed as filaments. These filaments are associated with dust ridges, aligned with the magnetic field measured on the structures by Planck at 353 GHz. The CNM above latitudes |b|>20{sup ∘} is described by a log-normal distribution, with a median Doppler temperature T{sub D} = 223 K, derived from observed line widths that include turbulent contributions. The median neutral hydrogen (H i) column density is N{sub H i} ≃ 10{sup 19.1} cm{sup −2}. These CNM structures are embedded within a warm neutral medium with N{sub H i} ≃ 10{sup 20} cm{sup −2}. Assuming an average distance of 100 pc, we derive for the CNM sheets a thickness of ≲0.3 pc. Adopting a magnetic field strength of B{sub tot} = (6.0 ± 1.8) μG, proposed by Heiles and Troland, and assuming that the CNM filaments are confined by magnetic pressure, we estimate a thickness of 0.09 pc. Correspondingly, the median volume density is in the range 14 ≲ n ≲ 47 cm{sup −3}.

79 ASTRONOMY AND ASTROPHYSICS↗

Fantastic Striations and Where to Find Them: The Origin of Magnetically Aligned Striations in Interstellar Clouds

Thin, magnetically aligned striations of relatively moderate contrast with the background are commonly observed in both atomic and molecular clouds. They are also prominent in MHD simulations with turbulent converging shocks. The simulated striations develop within a dense, stagnated sheet in the midplane of the post-shock region where magnetically induced converging flows collide. We show analytically that the secondary flows are an inevitable consequence of the jump conditions of oblique MHD shocks. They produce the stagnated, sheet-like sub-layer through a secondary shock when, roughly speaking, the Alfvénic speed in the primary converging flows is supersonic, a condition that is relatively easy to satisfy in interstellar clouds. The dense sub-layer is naturally threaded by a strong magnetic field that lies close to the plane of the sub-layer. The substantial magnetic field makes the sheet highly anisotropic, which is the key to the striation formation. Specifically, perturbations of the primary inflow that vary spatially perpendicular to the magnetic field can easily roll up the sheet around the field lines without bending them, creating corrugations that appear as magnetically aligned striations in column density maps. On the other hand, perturbations that vary spatially along the field lines curve the sub-layer and alter its orientation relative to the magnetic field locally, seeding special locations that become slanted overdense filaments and prestellar cores through enhanced mass accumulation along field lines. In our scenario, the dense sub-layer, which is unique to magnetized oblique shocks, is the birthplace for both magnetically aligned diffuse striations and massive star-forming structures.

79 ASTRONOMY AND ASTROPHYSICS↗

Photodiode characteristics and band alignment parameters of epitaxial Al{sub 0.5}Ga{sub 0.5}P

Wide-bandgap semiconductor Al{sub x}Ga{sub 1-x}P is a promising material candidate for low-noise photodiodes in blue/UV spectrum. Photodiodes were fabricated on Al{sub 0.5}Ga{sub 0.5}P epitaxial layer grown lattice matched on GaP substrate by molecular beam epitaxy. Although quantum efficiency is low for standard p-i-n photodiode due to inadvertent photon absorption in the top p-layer, it can be significantly improved by opening a recessed window in the top p-layer or by using a Schottky junction photodiode structure. Al{sub 0.5}Ga{sub 0.5}P band alignment parameters can be extrapolated from the current-voltage characteristics of Al{sub 0.5}Ga{sub 0.5}P Schottky junctions. The bandgap of Al{sub 0.5}Ga{sub 0.5}P was measured to be 2.38 eV.

36 MATERIALS SCIENCE↗

Structural tuning of nonlinear terahertz metamaterials using broadside coupled split ring resonators

We present an experimental and numerical study of a terahertz metamaterial with a nonlinear response that is controllable via the relative structural arrangement of two stacked split ring resonator arrays. The first array is fabricated on an n-doped GaAs substrate, and the second array is fabricated vertically above the first using a polyimide spacer layer. Due to GaAs carrier dynamics, the on-resonance terahertz transmission at 0.4 THz varies in a nonlinear manner with incident terahertz power. The second resonator layer dampens this nonlinear response. In samples where the two layers are aligned, the resonance disappears, and the total nonlinear modulation of the on-resonance transmission decreases. The nonlinear modulation is restored in samples where an alignment offset is imposed between the two resonator arrays. Structurally tunable metamaterials and metasurfaces can therefore act as a design template for tunable nonlinear THz devices by controlling the coupling of confined electric fields to nonlinear phenomena in a complex material substrate or inclusion.

36 MATERIALS SCIENCE↗

Structure of Human GIVD Cytosolic Phospholipase A2 Reveals Insights into Substrate Recognition

Cytosolic phospholipases A2 (cPLA2s) consist of a family of calcium-sensitive enzymes that function to generate lipid second messengers through hydrolysis of membrane-associated glycerophospholipids. The GIVD cPLA2 (cPLA2δ) is a potential drug target for developing a selective therapeutic agent for the treatment of psoriasis. Here, we present two X-ray structures of human cPLA2δ, capturing an apo state, and in complex with a substrate-like inhibitor. Comparison of the apo and inhibitor-bound structures reveals conformational changes in a flexible cap that allows the substrate to access the relatively buried active site, providing new insight into the mechanism for substrate recognition. The cPLA2δ structure reveals an unexpected second C2 domain that was previously unrecognized from sequence alignments, placing cPLA2δ into the class of membrane-associated proteins that contain a tandem pair of C2 domains. Furthermore, our structures elucidate novel inter-domain interactions and define three potential calcium-binding sites that are likely important for regulation and activation of enzymatic activity. These findings provide novel insights into the molecular mechanisms governing cPLA2's function in signal transduction.

59 BASIC BIOLOGICAL SCIENCES↗

Intermittency and alignment in strong RMHD turbulence

We develop an analytic model of intermittent, three-dimensional, strong, reduced magnetohydrodynamic (RMHD) turbulence with zero cross helicity. We take the fluctuation amplitudes to have a log-Poisson distribution and incorporate into the model a new phenomenology of scale-dependent dynamic alignment between the Elsässer variables z{sup ±}. We find that the structure function 〈|Δz{sub λ}{sup ±}|{sup n}〉 scales as λ{sup 1−β{sup n}}, where Δz{sub λ}{sup ±} is the variation in z{sup ±} across a distance λ perpendicular to the magnetic field. We calculate the value of β to be ≃ 0.69 based on our assumption that the most intense coherent structures are two-dimensional with a volume filling factor ∝ λ. Two consequences of this structure-function scaling are that the total-energy power spectrum is ∝ k{sub ⊥}{sup −1.52} and the kurtosis of the fluctuations is ∝ λ{sup −0.27}. Our model resolves the problem that alignment angles defined in different ways exhibit different scalings. Specifically, we find that the energy-weighted average angle between the velocity and magnetic-field fluctuations is ∝ λ{sup 0.21}, the energy-weighted average angle between Δz{sup +} and Δz{sup −} is ∝ λ{sup 0.10}, and the average angle between Δz{sup +} and Δz{sup −} without energy weighting is ∝ [ln(L/λ)]{sup −1/2} when L/λ≫1, where L is the outer scale. We also carry out a direct numerical simulation of RMHD turbulence. The scalings in our model are similar to the scalings in this simulation as well as the structure-function scalings observed in the slow solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic structure and resistivity minimum in GdCuAs 2

The electrical resistivity of GdCuAs 2 single crystals exhibits an anomalous Kondo-like resistivity minimum above the antiferromagnetic ordering temperature T N 1 approximate to 10.6 K, which is unusual for a highly localized 4f-moment (Gd 3+ ) system. Using x-ray resonant magnetic scattering, we determined the magnetic structure of GdCuAs 2 , where Gd moments are antiferromagnetically aligned along the crystallographic a axis and in the (+ + --) arrangement in the c direction and ferromagnetically arranged in the b direction. The antiferromagnetic order appears first at q = (δ, 0, 0.5) below 10 K, with an incommensurate modulation along the a axis and locks into a commensurate position at q = (1/3, 0, 0.5) below T N 2 approximate to 6 K. Our high-resolution x-ray diffraction measurements show a two-peak structure at Q = (2, 0, 6) above the resistivity minimum, suggesting a lower-symmetry crystal structure than the reported tetragonal structure, and the Q = (2, 0, 6) peak becomes a sharp one-peak structure below the resistivity minimum, implying a magnetoelastic coupling above T N . In conclusion, our findings suggest a complex interplay between the crystal structure and antiferromagnetic structure through a magnetoelastic coupling, associated with the anomalous resistivity minimum above T N 1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational studies of the x-ray scattering properties of laser aligned stilbene

The enhancement of the x-ray scattering signal from partially aligned molecular samples is investigated. The alignment properties of the studied molecular system are modeled based on the method of laser alignment. With the advances in the area of laser alignment of molecules, the application of this sample manipulation technique promises a great potential for x-ray scattering measurements. Preferential alignment of molecules in an otherwise amorphous sample leads to constructive interference and thus increases the scattering intensity. This enhances the structural information encoded in the scattering images and enables improved resolution in studies of reaction dynamics, as in this work is shown for the example of the photo-isomerization of stilbene. We demonstrate that the scattering signal is strongly influenced by the alignment axis. Even the most basic one-dimensional alignment offers significant improvement compared to the structural information provided by a randomly oriented sample. Although the signal is sensitive to the uncertainty in the alignment angle, it offers encouraging results even at realistic alignment uncertainties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vapor-to-glass preparation of biaxially aligned organic semiconductors

Physical vapor deposition (PVD) provides a route to prepare highly stable and anisotropic organic glasses that are utilized in multi-layer structures such as organic light-emitting devices. While previous work has demonstrated that anisotropic glasses with uniaxial symmetry can be prepared by PVD, here, we prepare biaxially aligned glasses in which molecular orientation has a preferred in-plane direction. With the collective effect of the surface equilibration mechanism and template growth on an aligned substrate, macroscopic biaxial alignment is achieved in depositions as much as 180 K below the clearing point TLC−iso (and 50 K below the glass transition temperature Tg) with single-component disk-like (phenanthroperylene ester) and rod-like (itraconazole) mesogens. The preparation of biaxially aligned organic semiconductors adds a new dimension of structural control for vapor-deposited glasses and may enable polarized emission and in-plane control of charge mobility.

Chemistry↗

The crystal and magnetic structure of the magnetocaloric compound FeMnP{sub 0.5}Si{sub 0.5}

The crystal and magnetic structure of the magnetocaloric compound FeMnP{sub 0.5}Si{sub 0.5} has been studied by means of neutron and X-ray powder diffraction. Single phase samples of nominal composition FeMnP{sub 0.5}Si{sub 0.5} have been prepared by the drop synthesis method. The compound crystallizes in the Fe{sub 2}P-type structure (P6-bar 2m) with the magnetic moments aligned along the a-axis. It is found that the Fe atoms are mainly situated in the tetrahedral 3g site while the Mn atoms prefer the pyramidal 3f position. The material is ferromagnetic (T{sub C}=382 K) and at 296 K the total magnetic moment is 4.4{mu}{sub B}/f.u. It is shown that the magnetic moment in the 3f site is larger (2.5{mu}{sub B}) than in the 3g site (1.9{mu}{sub B}). - Graphical abstract: The magnetic structure of FeMnP{sub 0.5}Si{sub 0.5} at 296 K. Revealed from refinements of neutron powder diffraction data. Highlights: > Single phase samples of the compound FeMnP{sub 0.5}Si{sub 0.5} has been synthesized by the drop synthesis method. > The crystal and magnetic structure was revealed from neutron powder diffraction data. > The material was found to crystallize in the Fe{sub 2}P-structure (P6-bar 2m). > The magnetic moments are coordinated along the a-axis with a total moment of 4.4{mu}{sub B}. > The large magnetic moments make FeMnP{sub 0.5}Si{sub 0.5} useful in magnetocaloric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of Confined Current Ribbon in JET Plasmas

We report the identification of a localized current structure inside the JET plasma. It is a field-aligned closed helical ribbon, carrying current in the same direction as the background current profile (cocurrent), rotating toroidally with the ion velocity (corotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears spontaneously in low density, high rotation plasmas, and can last up to 1.4 s, a time comparable to a local resistive time. It considerably delays the appearance of the first edge localized mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Focus: Two-dimensional electron-electron double resonance and molecular motions: The challenge of higher frequencies

The development, applications, and current challenges of the pulsed ESR technique of two-dimensional Electron-Electron Double Resonance (2D ELDOR) are described. This is a three-pulse technique akin to 2D Exchange Nuclear Magnetic Resonance, but involving electron spins, usually in the form of spin-probes or spin-labels. As a result, it required the extension to much higher frequencies, i.e., microwaves, and much faster time scales, with π/2 pulses in the 2-3 ns range. It has proven very useful for studying molecular dynamics in complex fluids, and spectral results can be explained by fitting theoretical models (also described) that provide a detailed analysis of the molecular dynamics and structure. We discuss concepts that also appear in other forms of 2D spectroscopy but emphasize the unique advantages and difficulties that are intrinsic to ESR. Advantages include the ability to tune the resonance frequency, in order to probe different motional ranges, while challenges include the high ratio of the detection dead time vs. the relaxation times. We review several important 2D ELDOR studies of molecular dynamics. (1) The results from a spin probe dissolved in a liquid crystal are followed throughout the isotropic → nematic → liquid-like smectic → solid-like smectic → crystalline phases as the temperature is reduced and are interpreted in terms of the slowly relaxing local structure model. Here, the labeled molecule is undergoing overall motion in the macroscopically aligned sample, as well as responding to local site fluctuations. (2) Several examples involving model phospholipid membranes are provided, including the dynamic structural characterization of the boundary lipid that coats a transmembrane peptide dimer. Additionally, subtle differences can be elicited for the phospholipid membrane phases: liquid disordered, liquid ordered, and gel, and the subtle effects upon the membrane, of antigen cross-linking of receptors on the surface of plasma membrane, vesicles can be observed. These 2D ELDOR experiments are performed as a function of mixing time, T{sub m}, i.e., the time between the second and third π/2 pulses, which provides a third dimension. In fact, a fourth dimension may be added by varying the ESR frequency/magnetic field combination. Therefore, (3) it is shown how continuous-wave multifrequency ESR studies enable the decomposition of complex dynamics of, e.g., proteins by virtue of their respective time scales. These studies motivate our current efforts that are directed to extend 2D ELDOR to higher frequencies, 95 GHz in particular (from 9 and 17 GHz), in order to enable multi-frequency 2D ELDOR. This required the development of quasi-optical methods for performing the mm-wave experiments, which are summarized. We demonstrate state-of-the-art 95 GHz 2D ELDOR spectroscopy through its ability to resolve the two signals from a spin probe dissolved in both the lipid phase and the coexisting aqueous phase. As current 95 GHz experiments are restricted by limited spectral coverage of the π/2 pulse, as well as the very short T{sub 2} relaxation times of the electron spins, we discuss how these limitations are being addressed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

"Covalent functionalization and electron-transfer properties of vertically aligned carbon nanofibers: The importance of edge-plane sites"

The use of covalently bonded molecular layers provides a way to combine the outstanding stability and electrochemical properties of carbon-based structures with the unique properties of molecular structures for applications such as electrocatalysis and solar conversion. The functionalization of vertically aligned carbon nanofibers (VACNFs) with 1-alkenes, using ultraviolet light, was investigated as a potential way to impart a variety of different functional groups onto the nanofiber sidewalls. We report how variations in the nanofiber growth rate impact both the amount of exposed edge-plane sites and the resulting electrochemical activity toward Ru(NH{sub 3}){sub 6}{sup 3+/2+} and Fe(CN){sub 6}{sup 3-/4-} redox couples. Measurements of the distribution of surface oxides show that surface oxides are unaffected by the grafting of alkenes to the nanofibers. Carbon nanofiber reactivity was also compared to multiwalled and single-walled carbon nanotubes. Our results demonstrate that edge-plane sites are preferred sites for photochemical grafting, but that the grafting of molecular layers only slightly reduces the overall electrochemical activity of the nanofibers toward the Ru(NH{sub 3}){sub 6}{sup 3+/2+} couple. These results provide new insights into the relationships between the chemical reactivity and electrochemical properties of nanostructured carbon materials and highlight the crucial role that exposed edge-plane sites play in the electrochemical properties of carbon nanotubes and nanofibers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗