Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface charging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Characterizations of strip-line microwave micro atmospheric plasma and its application to neutralization

In this work, we estimate the plasma parameters of strip-line microwave micro atmospheric plasma (SMMAP) such as rotational temperature (T{sub r}) both from OH and N{sub 2} rotational transitions (610-770 and 770-980 K in Ar, respectively), electron density (N{sub e}) from Stark broadening (about 10{sup 13}/cm{sup 3} in mixture of Ar and H{sub 2}), and the distribution of electric field before ignition of SMMAP (5x10{sup 4} V/m at maximum, and applied voltage less than 5 V). Since the lower applied voltage of SMMAP might enable us to conduct efficient processing without electrostatic damage (ESD), we applied jet-type SMMAP to neutralization. The result of neutralization showed that it can reduce surface charge from +-1000 to +-100 V for 0.2 s at 10 W with Ar gas flow within 4 V offset voltage, which provides efficient plasma processing without ESD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real-space mapping of dynamic phenomena during hysteresis loop measurements: Dynamic Switching Spectroscopy Piezoresponse Force Microscopy

Dynamic switching spectroscopy piezoresponse force microscopy is developed to separate thermodynamic and kinetic effects in local bias-induced phase transitions. The approaches for visualization and analysis of 5D data are discussed. The spatial and voltage variability of relaxation behavior of the a-c domain lead zirconate-titanate surface suggest the interpretation in terms of surface charge dynamics. This approach is applicable to local studies of dynamic behavior in any system with reversible bias-induced phase transitions ranging from ferroelectrics and multiferroics to ionic systems such as Li-ion and oxygen-ion conductors in batteries, fuel cells, and electroresistive systems.

30 DIRECT ENERGY CONVERSION↗

Tuning The Properties of Quantum Dots Via The Effective Mass

In the present work we revisit effective mass theory (EMT) for a semiconductor quantum dot (QD) and employ the BenDaniel-Duke (BDD) boundary condition. In effective mass theory mass m{sub i} inside the dot of radius R is different from the mass m{sub o} outside the dot. That gives us a crucial factor in determining the electronic spectrum namely {beta} = m{sub i}/m{sub 0}. We show both by numerical calculations and asymptotic analysis that the ground state energy and the surface charge density, {rho}(r) can be large. We also show that the dependence of the ground state energy on the radius of the well is infraquadratic. We demonstrate that the significance of BDD condition is pronounced at large R. We also study the dependence of excited state on the radius as well as the difference between energy states. Both exhibit an infra quadratic behavior with radius. The energy difference is important in study of absorption and emission spectra. We find that the BDD condition substantially alters the energy difference. Hence the interpretation of experimental result may need to be reexamined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Shape And Charge Of Lunar Dust Simulant (LHT) Under Electron Bombardment

Since the processes in dusty plasmas are rather complex, the study of charging individual dust grains within simplified conditions becomes very important. Detailed investigations and characterization of charging processes taking place not only in dusty plasmas but also in dust-rich space plasmas are possible for example in traps where a single dust grain can be captured for a long time and its temporal evolution with respect to surrounding conditions can be continuously recorded. The specific charge, surface potential, and mass of the observed grain can be determined. The paper shows partial results on secondary emission from lunar dust LHT simulant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation on collisions of filament pairs in dielectric barrier discharge

Collisions of filament pairs in a hexagonal superlattice pattern in dielectric barrier discharge are investigated on different timescales. In the evolution of the pattern, the space scale of each hexagon cell decreases with the increasing voltage. The duration of one collision is seven half voltage cycles at least. Two stable orientations of a pair are approximately perpendicular to each other and the orientational changes occurring during the entire colliding process should be a multiple of 30°. The time interval between two consecutive collisions decreases with the increasing voltage. The distance between the paired spots decreases nonmonotonically. Based on the discharge order of the pattern, it is inferred that the collision should be the interaction between a discharging filament and the surface charges deposited by another discharged filament, and the nonmonotonic decrease of distance D is explained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Revisiting density functionals for the primitive model of electric double layers

Density functional theory (DFT) calculations are typically based on approximate functionals that link the free energy of a multi-body system of interest with the underlying one-body density distributions. Whereas good performance is often proclaimed for new developments, it is difficult to vindicate the theoretical merits relative to alternative versions without extensive comparison with the numerical results from molecular simulations. Besides, approximate functionals may defy statistical-mechanical sum rules and result in thermodynamic inconsistency. Here we compare systematically several versions of density functionals for ionic distributions near a charged surface using the primitive model of electric double layers. We find that the theoretical performance is sensitive not only to the specific forms of the density functional but also to the range of parameter space and the precise properties under consideration. In general, incorporation of the thermodynamic sum rule into the DFT calculations shows significant improvements for both electrochemical properties and ionic distributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ergodicity reflected in macroscopic and microscopic field-dependent behavior of BNT-based relaxors

The effect of heterovalent B-site doping on ergodicity of relaxor ferroelectrics is studied using (1 − y)(0.81Bi{sub 1/2}Na{sub 1/2}TiO{sub 3}-0.19Bi{sub 1/2}K{sub 1/2}TiO{sub 3})-yBiZn{sub 1/2}Ti{sub 1/2}O{sub 3} (BNT-BKT-BZT) with y = (0.02;0.03;0.04) as a model system. Both the large- and small-signal parameters are studied as a function of electric field. The crystal structure is assessed by means of neutron diffraction in the initial state and after exposure to a high electric field. In order to measure ferroelastic domain textures, diffraction patterns of the poled samples are collected as a function of sample rotation angle. Piezoresponse force microscopy (PFM) is employed to probe the microstructure for polar regions at a nanoscopic scale. For low electric fields E < 2 kV·mm{sup −1}, large- and small-signal constitutive behavior do not change with composition. At high electric fields, however, drastic differences are observed due to a field-induced phase transition into a long-range ordered state. It is hypothesized that increasing BZT content decreases the degree of non-ergodicity; thus, the formation of long-range order is impeded. It is suggested that frozen and dynamic polar nano regions exist to a different degree, depending on the BZT content. This image is supported by PFM measurements. Moreover, PFM measurements suggest that the relaxation mechanism after removal of the bias field is influenced by surface charges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the effects of solar storms to the decaying orbital space debris

Any man-made object in Earth's orbit that no longer serves a useful purpose is classified as orbital debris. Debris objects come from a variety of sources. The majority is related to satellite fragmentation. Other major sources of debris are propulsion systems, and fragmentation of spent upper stages, payload and mission related debris. Serious concern about orbital debris has been growing. Knowledge of the future debris environment is important to both satellite designers, and mission planners, who need to know what hazards a satellite might encounter during the course of its mission. Therefore, it is important to know how much debris is in orbit, where it is located, and when it will decay. The debris environment is complex and dynamically evolving. Objects of different shape and size behave differently in orbit. The geoeffectiveness space environments include solar flux at 10.7 cm, solar energetic particles flux or speed, solar wind flow pressure, electric field, and geomagnetic indices. We study the decaying orbital debris from Tracking and Impact Prediction (TIP) messages in conjuction with geoeffectiveness space environments through time epoch correlation. We found that the decaying and reentry orbital debris are triggered by space environment enhancement within at least one week before reentry. It is not necessary a transient or high energetic and severe solar storm events are needed in decaying processes. We propose that the gradual enhancement processes of space environment will cause satellite surface charging due to energetic electron and enhance drag force.

79 ASTRONOMY AND ASTROPHYSICS↗

Skirting terahertz waves in a photo-excited nanoslit structure

Terahertz fields can be dramatically enhanced as they propagate through nanometer-sized slits. The enhancement is mediated by a significant accumulation of the induced surface charges on the surrounding metal. This enhancement is shown here to be dynamically modulated while the nanoslits are gradually shunted using a copropagating optical beam. The terahertz fields are found to skirt the nanoscale photo-excited region underneath the slits, scattering to the far field and rigorously mapping the near field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Passivation effect on gate-bias stress instability of carbon nanotube thin film transistors

A prior requirement of any developed transistor for practical use is the stability test. Random network carbon nanotube-thin film transistor (CNT-TFT) was fabricated on SiO{sub 2}/Si. Gate bias stress stability was investigated with various passivation layers of HfO{sub 2} and Al{sub 2}O{sub 3}. Compared to the threshold voltage shift without passivation layer, the measured values in the presence of passivation layers were reduced independent of gate bias polarity except HfO{sub 2} under positive gate bias stress (PGBS). Al{sub 2}O{sub 3} capping layer was found to be the best passivation layer to prevent ambient gas adsorption, while gas adsorption on HfO{sub 2} layer was unavoidable, inducing surface charges to increase threshold voltage shift in particular for PGBS. This high performance in the gate bias stress test of CNT-TFT even superior to that of amorphous silicon opens potential applications to active TFT industry for soft electronics.

36 MATERIALS SCIENCE↗

Electrical double layers and differential capacitance in molten salts from density functional theory

Classical density functional theory (DFT) is used to calculate the structure of the electrical double layer and the differential capacitance of model molten salts. The DFT is shown to give good qualitative agreement with Monte Carlo simulations in the molten salt regime. The DFT is then applied to three common molten salts, KCl, LiCl, and LiKCl, modeled as charged hard spheres near a planar charged surface. The DFT predicts strong layering of the ions near the surface, with the oscillatory density profiles extending to larger distances for larger electrostatic interactions resulting from either lower temperature or lower dielectric constant. In conclusion, overall the differential capacitance is found to be bell-shaped, in agreement with recent theories and simulations for ionic liquids and molten salts, but contrary to the results of the classical Gouy-Chapman theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-dimensional simulation research of secondary electron emission avalanche discharge on vacuum insulator surface

Based on the secondary electron emission avalanche (SEEA) model, the SEEA discharge on the vacuum insulator surface is simulated by using a 2D PIC-MCC code developed by ourselves. The evolutions of the number of discharge electrons, insulator surface charge, current, and 2D particle distribution are obtained. The effects of the strength of the applied electric field, secondary electron yield coefficient, rise time of the pulse, length of the insulator on the discharge are investigated. The results show that the number of the SEEA electrons presents a quadratic dependence upon the applied field strength. The SEEA current, which is on the order of Ampere, is directly proportional to the field strength and secondary electron yield coefficient. Finally, the electron-stimulated outgassing is included in the simulation code, and a three-phase discharge curve is presented by the simulation, which agrees with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical and numerical investigations of inverse patchy colloids in the fluid phase

We investigate the structural and thermodynamic properties of a new class of patchy colloids, referred to as inverse patchy colloids (IPCs) in their fluid phase via both theoretical methods and simulations. IPCs are nano- or micro- meter sized particles with differently charged surface regions. We extend conventional integral equation schemes to this particular class of systems: our approach is based on the so-called multi-density Ornstein-Zernike equation, supplemented with the associative Percus-Yevick approximation (APY). To validate the accuracy of our framework, we compare the obtained results with data extracted from NpT and NVT Monte Carlo simulations. In addition, other theoretical approaches are used to calculate the properties of the system: the reference hypernetted-chain (RHNC) method and the Barker-Henderson thermodynamic perturbation theory. Both APY and RHNC frameworks provide accurate predictions for the pair distribution functions: APY results are in slightly better agreement with MC data, in particular at lower temperatures where the RHNC solution does not converge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Green synthesis of gold nanoparticles using aqueous ethanol extract of Curcuma mangga rhizomes as reducing agent

Green synthesis of gold nanoparticles (AuNPs) had been developed as an alternative to chemical and physical methods due to its simplicity, cost effectiveness and eco-friendliness. The high biocompatibility and biostability features of AuNPs have found importance in biomedical applications in recent years. In this study, aqueous ethanol extract of Curcuma mangga rhizomes which acts as reducing and stabilizing agent was used to synthesize stable AuNPs by bioreduction of chloroauric acid. The formation of AuNPs was highlighted by the color change of the suspension from light yellow to reddish purple. Time-evolution was monitored by UV-visible spectroscopy, while surface plasmon (SP) absorption band of the AuNPs suspension was observed at a maximum absorption of 540 nm. Hydrodynamic radii and size distribution of the AuNPs in the suspension were evaluated using dynamic light scattering (DLS) and zeta potential measurement demonstrated negative surface charge. The particle size was calculated in the range of 2-30 nm using High Resolution Transmission Electron Microscopy (HRTEM). The morphology and elemental composition were further determined by Field Effect Scanning Electron Microscopy (FESEM) and Energy Dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) spectroscopy meanwhile was used to confirm the presence of AuNPs and functional groups involved in the gold bio-reduction process. Influence of the volume of extract and concentration of gold (III) chloride trihydrate (HAuCl{sub 4}.3H{sub 2}O) on the synthesis of AuNPs were also investigated. The results obtained indicate potential optimization and functionalization of AuNPs for future applications in bionanotechnology especially in the field of medicine.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relationship between pore size and reversible and irreversible immobilization of ionic liquid electrolytes in porous carbon under applied electric potential

Transport of electrolytes in nanoporous carbon-based electrodes largely defines the function and performance of energy storage devices. Here, using molecular dynamics simulation and quasielastic neutron scattering, we investigate the microscopic dynamics of a prototypical ionic liquid electrolyte, [emim][Tf 2 N], under applied electric potential in carbon materials with 6.7 nm and 1.5 nm pores. The simulations demonstrate the formation of dense layers of counter-ions near the charged surfaces, which is reversible when the polarity is reversed. In the experiment, the ions immobilized near the surface manifest themselves in the elastic scattering signal. The experimentally observed ion immobilization near the wall is fully reversible as a function of the applied electric potential in the 6.7 nm, but not in the 1.5 nm nanopores. In the latter case, remarkably, the first application of the electric potential leads to apparently irreversible immobilization of cations or anions, depending on the polarity, near the carbon pore walls. This unexpectedly demonstrates that in carbon electrode materials with the small pores, which are optimal for energy storage applications, the polarity of the electrical potential applied for the first time after the introduction of an ionic liquid electrolyte may define the decoration of the small pore walls with ions for prolonged periods of time and possibly for the lifetime of the electrode.

25 ENERGY STORAGE↗

Uniform p-type doping of silicon nanowires synthesized via vapor-liquid-solid growth with silicon tetrachloride

Boron-doped silicon nanowires (SiNWs) grown by the vapor-liquid-solid growth mechanism using silicon tetrachloride (SiCl4) as the silicon precursor and trimethylboron (TMB) as the boron source were studied to understand the axial and radial doping uniformity. TMB-doped SiNWs with diameters up to 400 nm and lengths > 7.5 μm were integrated into a global back-gated test structure with multiple electrodes for electrical characterization. From gate modulated measurements, the SiNWs were confirmed to be heavily doped p-type. Multiple four point resistivity measurements across a total length of 7.5 μm were taken on as-grown SiNWs. Resistivity, corrected for surface charge, was determined to be 0.01 +/– 0.002 Ω cm along the entire length of the as-grown boron doped SiNWs. This was also observed in the axial direction for etched SiNWs, with corrected resistivity of 0.01 +/– 0.003 Ω cm, therefore confirming the uniform p-type doping of SiNWs using TMB and SiCl 4 as precursors.

42 ENGINEERING↗

Unusual soft mode dynamics in ferroelectric PbTiO 3 , nanowire under different mechanical boundary conditions

Here, first-principles-based atomistic simulations are used to investigate equilibrium phases and soft mode dynamics in ultrathin ferroelectric PbTiO 3 nanowire with poor surface charge compensation subjected to a wide range of mechanical boundary conditions. The presence of the depolarizing field along the nanowire's transverse directions leads to the appearance of a unique high-frequency hard phonon mode that can be used to characterize electrical boundary conditions. This mode is insensitive to the mechanical load. Hydrostatic pressure was found to significantly influence the Curie point and ferroelectric soft modes in the nanowire. Uniaxial stress applied either along axial or transverse nanowire's direction is capable of inducing polydomain flux-closure phases that have a unique ``dynamical" fingerprint. In such phases the modes that originate from the soft modes of bulk PbTiO 3 become hard, which could open a way to potential identification of such nanodomain phases. In all cases, uniaxial stress significantly increases Curie temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal-phase intergradation in InAs nanostructures grown by van der Waals heteroepitaxy on graphene

In this study, we demonstrate the crystal-phase intergradation of InAs nanostructures grown on graphene via van der Waals epitaxy. InAs nanostructures with diverse diameters are yielded on graphene. High-resolution transmission electron microscopy (HR-TEM) reveals two crystallographic features of (i) wurtzite (WZ)-to-zinc blende (ZB) intergradation along the growth direction of InAs nanostructures and (ii) an increased mean fraction of ZB according to diameter increment. Based on the HR-TEM observations, a crystal-phase intergradation diagram is depicted. We discuss how the formation of a WZ-rich phase during the initial growth stage is an effective way of releasing heterointerfacial stress endowed by the lattice mismatch of InAs/graphene for energy minimization in terms of less in-plane lattice mismatching between WZ-InAs and graphene. Lastly, the WZ-to-ZB evolution is responsible for the attenuation of the bottom-to-top surface charge interaction as growth proceeds.

36 MATERIALS SCIENCE↗