Search NASA⌕ Search

SEARCH · Search NASA

Results for “triangularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Generation and use of unstructured grids for turbomachinery calculations

A wavefront mesh generator for two dimensional triangular meshes as well as a brief description of the solution method used with these meshes are presented. The interest is in creating meshes for solving the equations of fluid mechanics in complex turbomachinery problems, although the mesh generator and flow solver may be used for a larger variety of applications. The focus is on the flexibility and power of the mesh generation method for triangulating extremely complex geometries and in changing the geometry to create a new mesh. Two turbomachinery applications are presented which take advantage of this method: the analysis of pylon/strut and pylon/OGV interaction in the bypass of a turbofan.

Lindquist, Dana R.↗

Exploration of planetesimals by a tripartite tethered spacecraft

Asteroids and comets exert such a small gravitational force that it is not practical to survey them from orbit. One must instead continuously accelerate using maneuvering rockets to move around the surface. A space exploration craft in three parts connected by lightweight cables can survey asteroids and comets, and deploy landers, without requiring the large thrusters and the continuous depletion of fuel required by a single craft. The spacecraft is deployed by spinning up from a compact configuration using low thrust jets, and then maintain surveying orbit without any major expenditure of energy. The triangular tether arrangement is stable, but care must be taken in changing orbits and with deploying and recovering samples, as can be demonstrated with a simple simulation. Even 100 km long tethers occupy a low payload fraction.

Stephens, Richard B.↗

Tailorable advanced blanket insulation using aluminoborosilicate and alumina batting

Two types of Tailorable Advanced Blanket Insulation (TABI) flat panels for Advanced Space Transportation Systems were produced. Both types consisted of integrally woven, 3-D fluted core having parallel faces and connecting ribs of Nicalon yarns. The triangular cross section flutes of one type was filled with mandrels of processed Ultrafiber (aluminoborosilicate) stitchbonded Nextel 440 fibrous felt, and the second type wall filled with Saffil alumina fibrous felt insulation. Weaving problems were minimal. Insertion of the fragile insulation mandrels into the fabric flutes was improved by using a special insertion tool. An attempt was made to weave fluted core fabrics from Nextel 440 yarns but was unsuccessful because of the yarn's fragility. A small sample was eventually produced by an unorthodox weaving process and then filled with Saffil insulation. The procedures for setting up and weaving the fabrics and preparing and inserting insulation mandrels are discussed. Characterizations of the panels produced are also presented.

Calamito, Dominic P.↗

Ground effects on the low-speed aerodynamics of a powered, generic hypersonic configuration

A study was undertaken in the NASA Langley 14- by 22-foot subsonic tunnel to determine the low-speed aerodynamic characteristics of a powered, generic, hypersonic configuration in ground effect. The model was a simplified configuration consisting of a triangular wedge forebody, a rectangular mid-section which housed the flow through, an ejector type propulsion simulation system, and a rectangular wedge afterbody. Additional model components included a delta wing, a rectangular wedge forebody, inlet fences, exhaust flow deflectors, and afterbody fences. Aerodynamic force and moment data were obtaind over an angle of attack range from -4 to 18 degrees while model height above the tunnel floor was varied from 1/4 inch to 6 feet. Variations in freestream dynamic pressure, from 10 psf to 80 psf, and engine ejector pressure yielded a range of thrust coefficients from 0 to 0.8.

Gatlin, Gregory M.↗

Local delamination in laminates with angle ply matrix cracks. Part 2: Delamination fracture analysis and fatigue characterization

Constant amplitude tension-tension fatigue tests were conducted on AS4/3501-6 graphite/epoxy (02/ theta sub 2/ -(theta sub 2))sub s laminates, where theta was 15, 20, 25, or 30 degrees. Fatigue tests were conducted at a frequency of 5 Hz and an R-ratio of 0.1. Dye penetrant enhanced x-radiography was used to document the onset of matrix cracking in the central -(theta) degree plies, and the subsequent onset of local delaminations in the theta/ -(theta) interface at the intersection of the matrix cracks and the free edge, as a function of the number of fatigue cycles. Two strain energy release rate solutions for local delamination from matrix cracks were derived: one for a local delamination growing from an angle ply matrix crack with a uniform delamination growing from an angle ply matrix crack with a triangular shaped delamination area that extended only partially into the laminate width from the free edge. Plots of G(max) vs. N were generated to assess the accuracy of these G solutions. The influence of residual thermal and moisture stresses on G were also quantified. However, a detailed analysis of the G components and a mixed-mode fatigue failure criterion for this material may be needed to predict the fatigue behavior of these laminates.

Obrien, T. Kevin↗

Low-frequency scattering from cylindrical structures at oblique incidence

Classical Rayleigh scattering theory is extended to the case of a homogeneous dielectric cylinder of arbitrary cross section whose transverse dimensions are much smaller than the wavelength. By assuming that the surface fields can be approximated by those of the infinite cylinder, the far zone scattered field is expressed in terms of polarizability tensors, whose properties are discussed. Numerical results are presented for circular, semicircular, triangular, and square cylinders. The results are applicable to the remote sensing of twigs, stalks, and vegetation needles at centimeter and millimeter wavelengths.

Sarabandi, Kamal↗

Vertical velocities and momentum fluxes derived from wind measurements in the dusk auroral oval

Results are presented on a chemical release experiment carried out on March 20, 1985 in connection with NASA's Cooperative Observations of Polar Electrodynamics I campaign. Simultaneous neutral wind measurements in E region were carried out at three separate locations over a triangular region with sides of about 150 km in the dusk auroral oval, and the three wind profiles were used to calculate values of divergence and vorticity over the area. The vertical velocity over the hight range was calculated using the mass continuity equation, and the instantaneous vertical momentum fluxes in the E region were derived using the combination of horizontal-wind measurements and calculated vertical velocities. Results show that there is strong coupling between layers in the E region and that the momentum-flux-induced accelerations are at least comparable in magnitude to the pressure gradient and Coriolis force accelerations.

Larsen, M. F.↗

An efficient massively parallel Euler solver for unstructured grids

A data parallel mesh-vertex upwind finite-volume scheme for solving the Euler equations on triangular unstructured meshes is described. A novel vertex-based partitioning of the problem is introduced which minimizes the computation and communication costs associated with distributing the computation to the processors of a massively parallel computer. Finally, the performance of this unstructured computation on 8K processors of the Connection Machine CM-2 is compared with one processor of a Cray-YMP. The experiments show that 8K processors of the CM-2 achieve approximately 70 percent of the performance of one processor of the Cray-YMP on the unstructured mesh computations described here.

Hammond, Steven W.↗

DSMC calculations for the delta wing

Results are reported from three-dimensional direct simulation Monte Carlo (DSMC) computations, using a variable-hard-sphere molecular model, of hypersonic flow on a delta wing. The body-fitted grid is made up of deformed hexahedral cells divided into six tetrahedral subcells with well defined triangular faces; the simulation is carried out for 9000 time steps using 150,000 molecules. The uniform freestream conditions include M = 20.2, T = 13.32 K, rho = 0.00001729 kg/cu m, and T(wall) = 620 K, corresponding to lambda = 0.00153 m and Re = 14,000. The results are presented in graphs and briefly discussed. It is found that, as the flow expands supersonically around the leading edge, an attached leeside flow develops around the wing, and the near-surface density distribution has a maximum downstream from the stagnation point. Coefficients calculated include C(H) = 0.067, C(DP) = 0.178, C(DF) = 0.110, C(L) = 0.714, and C(D) = 1.089. The calculations required 56 h of CPU time on the NASA Langley Voyager CRAY-2 supercomputer.

Celenligil, M. Cevdet↗

A numerical modeling study of the interaction between the tides and the circulation forced by high-latitude plasma convection

A spectral, time-varying thermospheric general circulation model has been used to study the nonlinear interaction at high latitudes between the tides propagating into the thermosphere from below and the circulation induced by magnetospheric forcing and in situ solar heating. The model is discrete in the vertical with 27 layers spaced by half a scale height. In the horizontal, the fields are expanded in a series of spherical harmonics using a triangular truncation at wave number 31, equivalent to a homogeneous global resolution with a minimum wavelength of 1270 km. A hypothetical uniform grid point model would require a horizontal spacing of 417 km to describe the same minimum wavelength. In the high-latitude F region the tides affect the dusk vortex of the neutral flow very little, but the dawn vortex is either suppressed or amplified dependent upon the universal time and tidal phase. In the E region neutral flow, both the dusk and dawn vortices are shifted in local time by the tides, again as a function of universal time and tidal phase. At dusk a nonlinear amplification of the sunward winds occurs for certain combinations of parameters, and at dawn the winds may be completely suppressed. Below 120 km altitude the magnetospheric forcing creates a single cyclonic vortex which is also sensitive to the high-latitude tidal structure.

Mikkelsen, I. S.↗

Biological production models as elements of coupled, atmosphere-ocean models for climate research

Process models of phytoplankton production are discussed with respect to their suitability for incorporation into global-scale numerical ocean circulation models. Exact solutions are given for integrals over the mixed layer and the day of analytic, wavelength-independent models of primary production. Within this class of model, the bias incurred by using a triangular approximation (rather than a sinusoidal one) to the variation of surface irradiance through the day is computed. Efficient computation algorithms are given for the nonspectral models. More exact calculations require a spectrally sensitive treatment. Such models exist but must be integrated numerically over depth and time. For these integrations, resolution in wavelength, depth, and time are considered and recommendations made for efficient computation. The extrapolation of the one-(spatial)-dimension treatment to large horizontal scale is discussed.

Platt, Trevor↗

An algorithm for domain decomposition in finite element analysis

A simple and efficient algorithm is described for automatic decomposition of an arbitrary finite element domain into a specified number of subdomains for finite element and substructuring analysis in a multiprocessor computer environment. The algorithm is designed to balance the work loads, to minimize the communication among processors and to minimize the bandwidths of the resulting system of equations. Small- to large-scale finite element models, which have two-node elements (truss, beam element), three-node elements (triangular element) and four-node elements (quadrilateral element), are solved on the Convex computer to illustrate the effectiveness of the proposed algorithm. A FORTRAN computer program is also included.

Al-Nasra, M.↗

Parallel homotopy curve tracking on a hypercube

An investigation is conducted to find good parallel algorithms for solving systems of nonlinear equations using probability-one homotopy methods. Particular attention is paid to algorithms for the hypercube. Methods for one of the most computationally expensive steps of the homotopy approach, the computation of the kernel of the Jacobian matrix of the homotopy map, are studied. General nonlinear systems of equations with small and dense Jacobian matrices are considered, however, polynomial systems are not, since their structure leads to different strategies for parallelism. The mathematics behind the homotopy algorithm is summarized and the use of orthogonal factorizations is discussed. Parallel algorithms for orthogonal factorizations and triangular system solving are described. Computational results are presented and discussed.

Chakraborty, A.↗

Gravitational clustering in the expanding universe - Controlled high-resolution studies in two dimensions

Results are presented from a series of gravitational clustering simulations in two dimensions. These simulations are a significant departure from previous work, since in two dimensions one can have large dynamic range in both length scale and mass using present computer technology. Controlled experiments were conducted by varying the slope of power-law initial density fluctuation spectra and varying cutoffs at large k, while holding constant the phases of individual Fourier components and the scale of nonlinearity. Filaments are found in many different simulations, even with pure power-law initial conditions. By direct comparison, filaments, called 'second-generation pancakes' are shown to arise as a consequence of mild nonlinearity on scales much larger than the correlation length and are not relics of an initial lattice or due to sparse sampling of the Fourier components. Bumps of low amplitude in the two-point correlation are found to be generic but usually only statistical fluctuations. Power spectra are much easier to relate to initial conditions, and seem to follow a simple triangular shape (on log-log plot) in the nonlinear regime. The rms density fluctuation with Gaussian smoothing is the most stable indicator of nonlinearity.

Beacom, John Francis↗

Adaptive unstructured mesh methods for steady viscous flow

The solution of the equations governing steady laminar viscous flows on unstructured triangular meshes is addressed. The shortcomings of the standard adaptivity approaches for this class of problems are highlighted and a modified method based upon the combined use of mesh enrichment, mesh movement, and adaptive remeshing, is proposed. The behavior of the proposed scheme is demonstrated by applying it in the solution of compression corner flows.

Hassan, O.↗

Design considerations for lunar base photovoltaic power systems

A survey was made of factors that may affect the design of photovoltaic arrays for a lunar base. These factors, which include the lunar environment and system design criteria, are examined. A photovoltaic power system design with a triangular array geometry is discussed and compared to a nuclear reactor power system and a power system utilizing both nuclear and solar power sources.

Hickman, J. M.↗

Electromagnetic scattering from arbitrary shaped conducting bodies coated with lossy materials of arbitrary thickness

A simple and efficient numerical technique is presented to solve the electromagnetic scattering problem of coated conducting bodies of arbitrary shape. The surface equivalence principle is used to formulate the problem in terms of a set of coupled integral equations involving equivalent electric and magnetic surface currents which represent boundary fields. The conducting structures and the dielectric materials are modeled by planar triangular patches, and the method of moments is used to solve the integral equations. Numerical results for scattering cross sections are given for various structures and compared with other available data. These results are proved accurate by a number of representative examples.

Rao, Sadasiva M.↗

Adaptive finite element analysis of hypersonic laminar flows for aerothermal load predictions

The use of an adaptive mesh refinement procedure for analyzing hypersonic laminar flows with application to aerothermal load predictions is described. The adaptation procedure, which uses both quadrilateral and triangular elements, is implemented with the multistep Galerkin-Runge-Kutta scheme. Elements that lie in regions of strong gradients are refined based on indicators to obtain better definition of flow features. The effectiveness of the adaptive procedure is demonstrated by modeling Mach 11.7 flow over a 15-deg ramp. Numerical results are compared with predictions of strong interaction theories and experimental data. Surface quantities such as heating rates and pressure loads, critical for the effective design of high-speed vehicles, are found to be in good agreement with experimental values.

Ramakrishnan, R.↗