Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Uncertainties in Life Cycle Greenhouse Gas Emissions from Advanced Biomass Feedstock Logistics Supply Chains in Kansas

To meet Energy Independence and Security Act (EISA) cellulosic biofuel mandates, the United States will require an annual domestic supply of about 242 million Mg of biomass by 2022. To improve the feedstock logistics of lignocellulosic biofuels and access available biomass resources from areas with varying yields, commodity systems have been proposed and designed to deliver on-spec biomass feedstocks at preprocessing “depots”, which densify and stabilize the biomass prior to long-distance transport and delivery to centralized biorefineries. The harvesting, preprocessing, and logistics (HPL) of biomass commodity supply chains thus could introduce spatially variable environmental impacts into the biofuel life cycle due to needing to harvest, move, and preprocess biomass from multiple distances that have variable spatial density. This study examines the uncertainty in greenhouse gas (GHG) emissions of corn stover logisticsHPL within a bio-ethanol supply chain in the state of Kansas, where sustainable biomass supply varies spatially. Two scenarios were evaluated each having a different number of depots of varying capacity and location within Kansas relative to a central commodity-receiving biorefinery to test GHG emissions uncertainty. Monte Carlo simulation was used to estimate the spatial uncertainty in the HPL gate-to-gate sequence. The results show that the transport of densified biomass introduces the highest variability and contribution to the carbon footprint of the logistics HPL supply chain (0.2-13 g CO 2 e/MJ). Moreover, depending upon the biomass availability and its spatial density and surrounding transportation infrastructure (road and rail), logistics HPL processes can increase the variability in life cycle environmental impacts for lignocellulosic biofuels. Within Kansas, life cycle GHG emissions could range from 24 to 41 g CO 2 e/MJ depending upon the location, size and number of preprocessing depots constructed. However, this range can be minimized through optimizing the siting of preprocessing depots where ample rail infrastructure exists to supply biomass commodity to a regional biorefinery supply system

09 BIOMASS FUELS↗

Numerical investigation on two-fluid model (micropolar-Newtonian) for pulsatile flow of blood in a tapered arterial stenosis with radially variable magnetic field and core fluid viscosity

In the present study, an unsteady two-fluid model of blood through a tapered arterial stenosis with variable viscosity in the presence of variable magnetic field has been investigated. In this model, blood in the core region is assumed to be micropolar and plasma in the peripheral layer as Newtonian. Finite difference method is employed in solving the governing equations. The solutions for velocity, flow rate, wall shear stress and flow resistance are computed numerically. A comparison between the velocity profiles obtained by the present study and the experimental data is made and a good agreement between them is found. The model is used to study the effect of parameters such as taper angle, radially variable viscosity, hematocrit, the coupling number, the micropolar parameter, magnetic field and plasma layer thickness on physiologically important parameters such as wall shear stress distribution in the stenotic region and flow resistance. The results in the case of constant magnetic field and variable magnetic field are compared to study the effects of magnetic field on the flow of blood. It is found that the magnitudes of wall shear stress and flow resistance are higher in the case of variable magnetic field. It is important to note that the flow resistance is higher for magneto-micropolar fluid than the micropolar fluid. The wall shear stress decreases with increasing hematocrit parameter whereas flow resistance increases with hematocrit when the applied pressure gradient is held fixed. The model clearly shows the situation of a patient with a tapered arterial stenosis under feverish condition. Due care has been taken to compare the present theoretical results with the existing ones including experimental results and good agreement between them has been observed both qualitatively and quantitatively.

42 ENGINEERING↗

Magnetic field induced dynamical chaos

In this article, we have studied the dynamics of a particle having charge in the presence of a magnetic field. The motion of the particle is confined in the x–y plane under a two dimensional nonlinear potential. We have shown that constant magnetic field induced dynamical chaos is possible even for a force which is derived from a simple potential. For a given strength of the magnetic field, initial position, and velocity of the particle, the dynamics may be regular, but it may become chaotic when the field is time dependent. Chaotic dynamics is very often if the field is time dependent. Origin of chaos has been explored using the Hamiltonian function of the dynamics in terms of action and angle variables. Applicability of the present study has been discussed with a few examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Joint Non-Parametric Correction Estimator for Excess Relative Risk Regression in Survival Analysis with Exposure Measurement Error

Summary Observational epidemiological studies often confront the problem of estimating exposure–disease relationships when the exposure is not measured exactly. We investigate exposure measurement error in excess relative risk regression, which is a widely used model in radiation exposure effect research. In the study cohort, a surrogate variable is available for the true unobserved exposure variable. The surrogate variable satisfies a generalized version of the classical additive measurement error model, but it may or may not have repeated measurements. In addition, an instrumental variable is available for individuals in a subset of the whole cohort. We develop a non-parametric correction estimator by using data from the subcohort and further propose a joint non-parametric correction estimator using all observed data to adjust for exposure measurement error. An optimal linear combination estimator of the joint non-parametric correction and non-parametric correction is further developed. The estimators proposed are non-parametric, which are consistent without imposing a covariate or error distribution, and are robust to heteroscedastic errors. Finite sample performance is examined via a simulation study. We apply the developed methods to data from the Radiation Effects Research Foundation, in which chromosome aberration is used to adjust for the effects of radiation dose measurement error on the estimation of radiation dose responses.

Wang, Ching-Yun↗

Variability of K d Values in Cementitious Materials and Sediments

Measured distribution coefficients (K d values) for environmental contaminants provide input data for performance assessments (PA) that evaluate physical and chemical phenomena for release of radionuclides from wasteforms, degradation of engineered components and subsequent transport of radionuclides through environmental media. Research efforts at SRNL to study the effects of formulation and curing variability on the physiochemical properties of the saltstone wasteform produced at the Saltstone Disposal Facility (SDF) are ongoing and provide information for the PA and Saltstone Operations. Furthermore, the range and distribution of plutonium K d values in soils is not known. Knowledge of these parameters is needed to provide guidance for stochastic modeling in the PA. Under the current SRS liquid waste processing system, supernate from F & H Tank Farm tanks is processed to remove actinides and fission products, resulting in a low-curie Decontaminated Salt Solution (DSS). At the Saltstone Production Facility (SPF), DSS is mixed with premix, comprised of blast furnace slag (BFS), Class F fly ash (FA), and portland cement (OPC) to form a grout mixture. The fresh grout is subsequently placed in SDF vaults where it cures through hydration reactions to produce saltstone, a hardened monolithic waste form. Variation in saltstone composition and cure conditions of grout can affect the saltstone's physiochemical properties. Variations in properties may originate from variables in DSS, premix, and water to premix ratio, grout mixing, placing, and curing conditions including time and temperature (Harbour et al. 2007; Harbour et al. 2009). There are no previous studies reported in the literature regarding the range and distribution of K d values in cementitious materials. Presently, the Savannah River Site (SRS) estimate ranges and distributions of K d values based on measurements of K d values made in sandy SRS sediments (Kaplan 2010). The actual cementitious material K d values and solubility values differ from the sandy sediments. The K d value range and distribution currently used in the PA are estimated to range between 0.25*K d and 1.75*K d , where the minimum and maximum values of the ranges reflect the 95% confidence level for the mean K d value (Kaplan 2010). The objective of the research with cementitious materials was to measure the range and distribution of a monovalent (Cs) and I - (anion), divalent (Sr), and trivalent (Eu) ions for a variety of laboratory-prepared saltstone surrogate samples to establish a K d range other than that which is presently used in the PA. It has been observed in laboratory samples that cure temperature profiles can affect properties such as heat of hydration, permeability, porosity, compressive strength, and set time (Harbour et al. 2009). The intent was to identify a range and distribution that could be used by stochastic modelers for the PA. Furthermore, the intent was to replace the arbitrarily selected distributions based on geological sandy sediments and to base it on actual cementitious materials. The scope of this study did not include understanding saltstone sorption mechanisms responsible for increasing or decreasing sorption. Similar to the work with cementitious materials, the purpose of the Pu sediment K d dataset was not to attempt to understand through statistics how to better understand Pu sorption to sediments or to lower Pu K d variance. The sediment Pu K d data is included in this study because it is a key risk driver for the PAs on the SRS, and there is presently no direct studies of Pu variability in SRS soils. Instead the distribution of Pu sediment K d values was assumed to be similar to other cations, as presented by Kaplan (2010).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Increasing Mosquito Abundance Under Global Warming

Mosquitoes are a key virus vector that poses significant health threats globally, affecting 700 million individuals and causing 1 million deaths annually. Accurately predicting mosquito abundance and dispersion remains a challenge. Complex interactions between mosquito dynamics and various environmental factors, notably hydrology, contribute to this challenge. Existing models typically focus on precipitation and temperature and often overlook further impacts of hydrological variables within mosquito modeling. In this study, we developed an artificial intelligence‐based model for mosquito dynamics, explicitly accounting for different hydrological variables, such as precipitation, soil moisture and streamflow. Using Toronto, Canada, as a case study, we identified causal relationships between changes in mosquito populations, hydrological factors, vegetation (e.g., leaf area index), and climate variables (e.g., daylight length, precipitation, and temperature). We embedded these relationships into a Long Short‐Term Memory (LSTM) Neural Network Model capable of accurately detecting mosquito dynamics across annual, seasonal, and monthly time scales. The LSTM is able to explain, on average, approximately 40% of the variance in the observed mosquito abundance data. Using the calibrated model, we predicted that the summer season mosquito abundance would increase by ∼16% and ∼19% under an intermediate greenhouse emission scenario, Shared Socioeconomic Pathway (SSP) 2–4.5, and a high greenhouse emission scenario, SSP5‐8.5, respectively. We expect that this model can serve as a valuable tool and inform science‐based decisions affecting mosquito dynamics and public health. It can also build a foundation for future risk analysis at the regional and larger scales.

54 ENVIRONMENTAL SCIENCES↗

A Conceptual Evaluation of Sustainable Variable-Rate Agricultural Residue Removal

Agricultural residues have near-term potential as a feedstock for bioenergy production, but their removal must be managed carefully to maintain soil health and productivity. Recent studies have shown that subfield scale variability in soil properties (e.g., slope, texture, and organic matter content) that affect grain yield significantly affect the amount of residue that can be sustainably removed from different areas within a single field. This modeling study examines the concept of variable-rate residue removal equipment that would be capable of on-the-fly residue removal rate adjustments ranging from 0 to 80%. Thirteen residue removal rates (0% and 25–80% in 5% increments) were simulated using a subfield scale integrated modeling framework that evaluates residue removal sustainability considering wind erosion, water erosion, and soil carbon constraints. Three Iowa fields with diverse soil, slope, and grain yield characteristics were examined and showed sustainable, variable-rate agricultural residue removal that averaged 2.35, 7.69, and 5.62 Mg ha-1, respectively. In contrast, the projected sustainable removal rates using rake and bale removal for the entire field averaged 0.0, 6.40, and 5.06 Mg ha-1, respectively. The modeling procedure also projected that variable-rate residue harvest would result in 100% of the land area in all three fields being managed in a sustainable manner, whereas Field 1 could not be sustainably managed using rake and bale removal, and only 83 and 62% of the land area in Fields 2 and 3 would be managed sustainably using a rake and bale operation for the entire field. In addition, it was found that residue removal adjustments of 40 to 65% are sufficient to collect 90% of the sustainably available agricultural residue.

09 BIOMASS FUELS↗

Multifidelity validation of digital surrogates using variable-density turbulent mixing models

In this study, ensembles of experimental data are presented and utilized to compare and validate two models used in the simulation of variable-density (Atwood = 0.22), compressible turbulent mixing. Though models of this kind (Reynolds averaged NavierStokes and large-eddy simulations) have been validated extensively with more canonical flows in previous studies, here the present approach offers novelty in the complexity of the geometry, the ensemble-based validation, and the uniformity of the computational framework on which the models are tested. Moreover, all experimental and computational tasks were completed by the authors which has led to a tightly coupled experimental configuration with its “digital twin.” The experimental divergent-shock-tube facility and its data acquisition methods are described and replicated in simulation space. A 2D Euler model which neglects the turbulent mixing at the interface is optimized to experimental data using a Gaussian process. This model then serves as the basis for both the 2D RANS and 3D LES studies that make comparisons to the mixing-layer data from the experiment. A relatively simple RANS model is shown to produce good agreement with experimental data only at late flow development times. The LES ensembles generally show good agreement with experimental data but display sensitivity to the characterization of initial conditions. Resolution-dependent behavior is also observed for certain higher-order statistics of interest. Overall, the LES model successfully captures the effects of divergent geometry, compressibility, and combined nonlinear instabilities inherent to the problem. The successful prediction of mixing width and its growth rate highlight the existence of three distinct regimes in the development of the instability, each with similarities to previously studied instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Issues concerning the determination of solubility products of sparingly soluble crystalline solids: solubility of HfO2(cr)

Solubility studies were conducted with HfO2(cr) solid as a function HCl and ionic strength ranging from 2.0 to 0.004 mol kg -1. These studies involved 1) using two different amounts of the solid phase, 2) acid washing the bulk solid phase, 3) preheating the solid phase to 1400 °C, and 4) heating amorphous HfO2(am) suspensions to 90°C to ascertain whether the HfO2(am) converts to HfO2(cr) and to determine the solubility from the oversaturation direction. Based on the results of these treatments it is concluded that the HfO2(cr) contains a small fraction of less crystalline, but not amorphous, material [HfO2(lcr)] and this, rather than the HfO2(cr), is the solubility-controlling phase in the range of experimental variables investigated in this study. The solubility data are interpreted using both the Pitzer and SIT models and they provide log10 ??0 values of -(59.75±0.35) and -(59.48±0.41), respectively, for the solubility product of HfO2(lcr) [HfO2(lcr) + 2H2O Hf4+ + 4OH - ]. The log 10 of the solubility product of HfO2(cr) is estimated to be < -63. The observation of a small fraction of less crystalline higher solubility material is consistent with the general picture that mineral surfaces are often structurally and/or compositionally imperfect leading to a higher solubility than the bulk crystalline solid. This study stresses the urgent need, during interpretation of solubility data, of taking precautions to make certain that the observed solubility behavior for sparingly-soluble solids is assigned to the proper solid phase.

Rai, Dhanpat↗

Performance Assessment of Suture Type, Water Temperature, and Surgeon Skill in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters

Size reductions of acoustic transmitters implanted in migrating juvenile salmonids have resulted in the use of a shorter incision - one that may warrant only one suture for closure. However, it is not known if a single suture will sufficiently hold the incision closed when fish are decompressed and outward pressure is placed on the surgical site during passage of hydroelectric dams. The objectives of this study were to evaluate five response variables in juvenile Chinook salmon subjected to simulated turbine passage. Fish were implanted with an acoustic transmitter (0.43 g in air) and a passive integrated transponder tag (0.10 g in air); incisions (6 mm) were closed with either one or two sutures. Following exposure, no transmitters were expelled. In addition, suture and incision tearing and mortal injury did not differ between treatment and control fish. Viscera expulsion was higher in treatment (12%) than control (1%) fish. The higher incidence of viscera expulsion through single-suture incisions warrants concern. Consequently, the authors do not recommend using one suture to close 6-mm incisions associated with acoustic transmitter implantation when juvenile salmonids may be exposed to turbine passage.

Deters, Katherine A↗

The dissolution behavior of borosilicate glasses in far-from equilibrium conditions

In far-from-equilibrium conditions, the dissolution of borosilicate glasses used to immobilize nuclear waste is known to be a function of both temperature and pH. The aim of this paper is to study effects of these variables on three model waste glasses (SON68, ISG, AFCI). To do this, experiments were conducted at temperatures of 23, 40, 70, and 90 °C and pH(RT) values of 9, 10, 11, and 12 with the single-pass flow-through (SPFT) test method. The results from these tests were then used to parameterize a kinetic rate model based on transition state theory. Both the absolute dissolution rates and the rate model parameters are compared with previous results. Discrepancies in the absolute dissolution rates as compared to those obtained using other test methods are discussed. Rate model parameters for the three glasses studied here are nearly equivalent within error and in relative agreement with previous studies. The results were analyzed with a linear multivariate regression (LMR) and a nonlinear multivariate regression performed with the use of the Glass Corrosion Modeling Tool (GCMT), which is capable of providing a robust uncertainty analysis. This robust analysis highlights the high degree of correlation of various parameters in the kinetic rate model. As more data are obtained on borosilicate glasses with varying compositions, the effect of glass composition on the rate parameter values could possibly be obtained. This would allow for the possibility of predicting the forward dissolution rate of glass based solely on composition

Neeway, James J.↗

Lack of uniform trends but increasing spatial variability in observed Indian rainfall extremes

Recent studies disagree on how rainfall extremes over India have changed in space and time over the past half century, as well as on whether the changes observed are due to global warming or regional urbanization. Although a uniform and consistent decrease in moderate rainfall has been reported, a lack of agreement about trends in heavy rainfall may be due in part to differences in the characterization and spatial averaging of extremes. Here we use extreme value theory to examine trends in Indian rainfall over the past half century in the context of long-term, low-frequency variability.We show that when generalized extreme value theory is applied to annual maximum rainfall over India, no statistically significant spatially uniform trends are observed, in agreement with previous studies using different approaches. Furthermore, our space time regression analysis of the return levels points to increasing spatial variability of rainfall extremes over India. Our findings highlight the need for systematic examination of global versus regional drivers of trends in Indian rainfall extremes, and may help to inform flood hazard preparedness and water resource management in the region.

54 ENVIRONMENTAL SCIENCES↗

Correlation of critical current density to quasi-biaxial texture and grain boundary cleanliness in fully dense Bi-2212 wires

The distinctive quasi-biaxial texture of Bi 2 Sr 2 CaCu 2 O x (Bi-2212) plays an important role in enabling high critical current density ($J_c$) in Bi-2212 round wires (RWs). Here we studied three over pressure heat treated wires with $J_c$ varying by a factor of ~10, all being fully dense. Using electron backscatter diffraction, we observed the differences in biaxial texture in these three wires. Transmission electron microscopy also revealed differences in grain boundary (GB) cleanliness and connectivity. These analyses showed that high $J_c$ is unambiguously correlated to the best biaxial texture, which is in turn correlated to slow cooling from the liquid melt into solid Bi-2212. However, at 4.2 K, there is a negligible difference in intragrain pinning in the three wires, suggesting that the $J_c$ variation by a factor of ~10 is primarily due to variable filament and intergrain connectivity. In this work, the principal determinants of intergrain connectivity is the quasi-biaxial texture and GB cleanliness. Overall, $J_c$ optimization of the Bi-2212 RW is a complex multi-variable process, but this study shows that maximizing the biaxial texture quality is an important first step in such an optimization process.

36 MATERIALS SCIENCE↗

Financial and economic determinants of collective action: The case of wastewater management

Where public environmental funds support development of wastewater infrastructure, funding institutions ensure the economic use of funds, while the beneficiaries minimize their own costs. In rural areas, there is often a choice between decentralized or centralized (multi-village) systems: if the centralized system is most economic, then only this system is eligible for public funding. However, its implementation requires a voluntary cooperation of the concerned communities, who need to organize themselves to develop and run the infrastructure. The paper analyzes the social determinants of collaboration in a generic case study, using the following variables: method of (economic) assessment, modeled by the social discount rate, funding policy, modeled by the funding rate, and users' self-organization, modeled by cost sharing. In a borderline situation, where the centralized system turns out to be most economic, but this assessment is contingent on the assessment method, collective action may fail: the advantages of collective action from funding are too small to outweigh organizational deficiencies. Considering in this situation sanitation as a human right, authors recommend using innovative forms of organization and, if these fail, reassessing either the amount of funding or the eligibility for funding of more acceptable alternatives. - Highlights: Black-Right-Pointing-Pointer A generic case study models collective action and funding in wastewater management. Black-Right-Pointing-Pointer Determinants of success: economic assessment, funding policy and self-organization. Black-Right-Pointing-Pointer Success indicators: conflict rate, funds needed to make cost shares fair. Black-Right-Pointing-Pointer Method for analyzing centralized vs. decentralized disputes. Black-Right-Pointing-Pointer If collective action has less benefits, innovative cost sharing may ensure success.

54 ENVIRONMENTAL SCIENCES↗

VARIABILITY IN HOT CARBON-DOMINATED ATMOSPHERE (HOT DQ) WHITE DWARFS: RAPID ROTATION?

Hot white dwarfs (WDs) with carbon-dominated atmospheres (hot DQs) are a cryptic class of WDs. In addition to their deficiency of hydrogen and helium, most of these stars are highly magnetic, and a large fraction vary in luminosity. This variability has been ascribed to nonradial pulsations, but increasing data call this explanation into question. We present studies of short-term variability in seven hot DQ WDs. Three (SDSS J1426+5752, SDSS J2200−0741, and SDSS J2348−0942) were known to be variable. Their photometric modulations are coherent over at least two years, and we find no evidence for variability at frequencies that are not harmonics. We present the first time-series photometry for three additional hot DQs (SDSS J0236−0734, SDSS J1402+3818, and SDSS J1615+4543); none are observed to vary, but the signal-to-noise is low. Finally, we present high speed photometry for SDSS J0005−1002, known to exhibit a 2.1-day photometric variation; we do not observe any short-term variability. Monoperiodicity is rare among pulsating WDs, so we contemplate whether the photometric variability is due to rotation rather than pulsations; similar hypotheses have been raised by other researchers. If the variability is due to rotation, then hot DQ WDs as a class contain many rapid rotators. Given the lack of companions to these stars, the origin of any fast rotation is unclear—both massive progenitor stars and double degenerate merger remnants are possibilities. We end with suggestions of future work that would best clarify the nature of these rare, intriguing objects.

79 ASTRONOMY AND ASTROPHYSICS↗

Adaptation of methodology to select structural alternatives of one-way slab in residential building to the guidelines of the European Committee for Standardization (CEN/TC 350)

The European Committee for Standardization (CEN) through its Technical Committee CEN/TC-350 is developing a series of standards for assessing the building sustainability, at both product and building levels. The practical application of the selection (decision making) of structural alternatives made by one-way slabs leads to an intermediate level between the product and the building. Thus the present study addresses this problem of decision making, following the CEN guidelines and incorporating relevant aspects of architectural design into residential construction. A life cycle assessment (LCA) is developed in order to obtain valid information for the decision making process (the LCA was developed applying CML methodology although Ecoindicator99 was used in order to facilitate the comparison of the values); this information (the carbon footprint values) is contrasted with other databases and with the information from the Environmental Product Declaration (EPD) of one of the lightening materials (expanded polystyrene), in order to validate the results. Solutions of different column disposition and geometries are evaluated in the three pillars of sustainable construction on residential construction: social, economic and environmental. The quantitative analysis of the variables used in this study enables and facilitates an objective comparison in the design stage by a responsible technician; the application of the proposed methodology reduces the possible solutions to be evaluated by the expert to 12.22% of the options in the case of low values of the column index and to 26.67% for the highest values. - Highlights: • Methodology for selection of structural alternatives in buildings with one-way slabs • Adapted to CEN guidelines (CEN/TC-350) for assessing the building sustainability • LCA is developed in order to obtain valid information for the decision making process. • Results validated comparing carbon footprint, databases and Env. Product Declarations • The proposal reduces the solutions to be evaluated to between 12.22 and 26.67%.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

iSTEM Summer Institute: An Integrated Approach to Teacher Professional Development inSTEM

The importance of STEM education to our national prosperity and global competitiveness was recently reinforced by the Obama administration support for Change the Equation. Change the Equation is a multi-entity initiative formed in response to the rapidly increasing demand for STEM related careers and the potential lack of preparation by many Americans to be employed in these positions. To address the issue many are calling for increased emphasis on K-12 STEM education, as early preparation in STEM provides the foundation essential for further learning and competencies (National Research Council, 2007). Achieving and sustaining depth and breadth of K-12 STEM education is inextricably linked to ongoing professional development of K-12 educators. The need for teacher continuing education in STEM education and the link between teacher effectiveness and student preparation in STEM was the impetus behind our i- STEM professional development summer institute. The i-STEM initiative is a collaborative effort between business, industry, government, K-12, and higher education. Although the organization is working on a number of projects, including policy, research, communication, and collaborations, the i-STEM group has directed significant resources toward K-12 educator professional development opportunities in STEM. Our report focuses on the structure and impact of the intensive four-day i-STEM residential professional development institute which we designed to increase the capacity of grade 4-9 teachers to teach STEM content. We structured the summer institute using the outcome of a survey we conducted of grade 4-9 teachers’ to assess their STEM professional development needs, the extant literature on teacher development, the increasing need for a STEM informed society, and our desire to use evidence based practices to enhance teacher capacity to teach STEM content. We developed this investigation to determine if our summer institute influenced the participating teachers comfort with teaching STEM, efficacy for teaching STEM, content knowledge of STEM, inquiry implementation in STEM, and perceptions of STEM education. These parameters in-part have been gathered previously for specific areas of math or science education, but we are not aware of any study in which these variables have been attended to and assessed in the context of enhancing inservice teacher preparation to teach STEM. Therefore, our project provides a unique contribution to the literature because of our focus on STEM education and our adaptation and use of an array of assessment tools to measure the impact on our participants’ perceptions of teaching STEM, affective perspectives, and knowledge of the related content. Further, we are responding to the position of Putnam and Borko (2000) who contend there has been a dearth of attention paid toward creating teacher professional development experiences consistent with the teacher learning and investigations of the impact of the experience on the participating educators. Before we present our research and results, we discuss the relevant literature establishing the justification for our study. Following the presentation of our study results we discuss the related implications and directions for future research. We conclude with a discussion of study limitations and some closing remarks of our study contributions to the field of teacher professional development in STEM education.

99 GENERAL AND MISCELLANEOUS↗

X-ray spectral state evolution in IGR J17091–3624 and comparison of its heartbeat oscillation properties with those of GRS 1915+105

In this work, we study the X-ray timing and spectral evolution of the transient low-mass X-ray binary IGR J17091–3624 during the first 66 days of its 2011 outburst. We present results obtained from observations with two instruments, the Rossi X-ray Timing Explorer Proportional Counter Array and SWIFT X-Ray Telescope, between 2011 February 9 and 2011 April 15. Using quasi-periodic oscillation classifications, power density spectrum characteristics, time-lag behavior, and energy spectral properties, we determine source states and their transitions at different times of the outburst. During the first part of the evolution, the source followed trends that are usually observed from transient black hole X-ray binaries (BHXBs). Interestingly, a gradual transition is observed in IGR J17091–3624 from the low-variability soft intermediate state, commonly seen in BHXBs, to a high-variability state with regular, repetitive, and structured pulsations, seen only from GRS 1915+105 (also known as 'ρ' class variability/'heartbeat' oscillations). We study the time evolution of the characteristic timescale, quality factor, and rms amplitude of heartbeat oscillations in IGR J17091–3624. We also present a detailed comparison of the timing and spectral properties of heartbeat oscillations and their evolution in IGR J17091–3624 and GRS 1915+105.

79 ASTRONOMY AND ASTROPHYSICS↗