Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

CFD Modeling & Validation of Single Bubble Growth During Cavitation in Zero Gravity

Cryogenic Fluid Management (CFM) in zero gravity represents a vital area of research as NASA pursues future long-duration space missions. Success of these missions relies heavily on the ability to store and transfer the cryogenic liquid fuels efficiently and safely. In the Zero Boil-Off Tank (ZBOT-1) Experiment in 2018, unexpected and intense phase change occurred at the screened Liquid Acquisition Device (LAD) during tank pressure control that was later attributed to cavitation. The cavitation ultimately resulted in pump failure. Since cryogen cavitation during storage and transfer of propellants in microgravity has been a source of serious concern for the aerospace community, a series of drop tower experiments with liquid methane were also performed at the University of Bremen to carefully study cavitation from a single bubble nucleus in an engineered micron-sized wall cavity. As the test cell is depressurized during the 10-second drop, cavitation causes bubble growth from the nucleus. Here, in a collaboration between the Case Western Reserve University and University of Bremen, we present a two-phase Computational Fluid Dynamics (CFD) model of bubble growth from a single wall cavity during depressurization in microgravity. Both 2D axisymmetric and 3D parametric simulation case studies are performed to show the evolution of the bubble growth. The model uses a Volume of Fluid (VOF) approach with and without adaptive mesh refinement and adaptive time stepping to capture the growth dynamics using an explicit formulation with algebraic reconstruction of the interface. CFD results show good agreement with corresponding experiment. Based on the velocity, temperature, and volume fraction fields generated by the validation case studies, detailed discussion and analysis of fluid flow and heat transfer during bubble growth process are presented to delineate the intricacies of the cavitation process. Strengths and shortcomings of the present numerical approach in capturing this phenomenon are also highlighted.

Two Phase Flow↗

Next-Generation Optical Sensing Technologies for Exploring Ocean Worlds - NASA FluidCam, MiDAR, and NeMO-Net

We highlight three emerging NASA optical technologies that enhance our ability to remotely sense, analyze, and explore ocean worlds–FluidCam and fluid lensing, MiDAR, and NeMO-Net. Fluid lensing is the first remote sensing technology capable of imaging through ocean waves without distortions in 3D at sub-cm resolutions. Fluid lensing and the purpose-built FluidCam CubeSat instruments have been used to provide refraction-corrected 3D multispectral imagery of shallow marine systems from unmanned aerial vehicles (UAVs). Results from repeat 2013 and 2016 airborne fluid lensing campaigns over coral reefs in American Samoa present a promising new tool for monitoring fine-scale ecological dynamics in shallow aquatic systems tens of square kilometers in area. MiDAR is a recently-patented active multispectral remote sensing and optical communications instrument which evolved from FluidCam. MiDAR is being tested on UAVs and autonomous underwater vehicles (AUVs) to remotely sense living and non-living structures in light-limited and analog planetary science environments. MiDAR illuminates targets with high-intensity narrowband structured optical radiation to measure an object’s spectral reflectance while simultaneously transmitting data. MiDAR is capable of remotely sensing reflectance at fine spatial and temporal scales, with a signal-to-noise ratio 10-10(exp 3) times higher than passive airborne and spaceborne remote sensing systems, enabling high-framerate multispectral sensing across the ultraviolet, visible, and near-infrared spectrum. Preliminary results from a 2018 mission to Guam show encouraging applications of MiDAR to imaging coral from airborne and underwater platforms whilst transmitting data across the air-water interface. Finally, we share NeMO-Net, the Neural Multi-Modal Observation & Training Network for Global Coral Reef Assessment. NeMO-Net is a machine learning technology under development that exploits high-resolution data from FluidCam and MiDAR for augmentation of low-resolution airborne and satellite remote sensing. NeMO-Net is intended to harmonize the growing diversity of 2D and 3D remote sensing with in situ data into a single open-source platform for assessing shallow marine ecosystems globally using active learning for citizen-science based training. Preliminary results from four-class Q17 coral classification have an accuracy of 94.4%. Together, these maturing technologies present promising scalable, practical, and cost-efficient innovations that address current observational and technological challenges in optical sensing of marine systems.

Ved Chirayath↗

Open Source Visualization and Analysis Platform for 3D Reconstructions of Materials by Transmission Electron Microscopy

Three-dimensional characterization of materials at the nano- and meso-scale has become possible with transmission and scanning transmission electron microscopes (S/TEM). Its importance has extended to a wide class of nanomaterials such as hydrogen fuel cells, solar cells, industrial catalysts, new battery materials and semiconductor devices, as well as spanning high-tech industry, universities, and national labs. While capable instrumentation is abundant, this rapidly expanding demand for high-resolution tomography is bottlenecked by software that is instead tailored for lower-dose, biological applications and not optimized for higher-resolution materials applications. Existing tomography fails to utilize the chemical information provided by S/TEM spectrometers. To address this problem, this project delivered a scalable, fully functional, freely-distributable, open Source materials tomography package with a modern user interface that enables automated acquisition, alignment, and real-time reconstruction of raw tomography data, and provides advanced segmentation, three-dimensional chemical visualization and analysis optimized for materials applications. It has established an extendable framework capable of automation for high-throughput for the tomography of materials from data acquisition to visualization. Phase I and II delivered a full-featured, cross-platform, clean and integrated application for S/TEM materials tomography. It can read projection data from the microscope, with graphical tools for alignment of data, tomographic reconstruction, segmentation, and visualization of the reconstructed 3D volume. The entire pipeline can be saved to an XML state file, enabling fully reproducible data processing and analysis with a full Python environment for the development of custom algorithms, processing, and analysis requirements. Phase IIB extended the application to provide real-time tomographic reconstruction, "live updates" as data is processed, analysis of big data, and multi-channel tomography. Here, quantitative assessment of nanomaterials can occur as data is being recorded on a 3D visualization platform that accommodates additional information from multiple channels. We provide unmatched high-throughput tomography, where the complete tomographic pipeline from measurement to 3D visualization can occur rapidly. The project was extended to offer capabilities for micro-CT, X-ray, neutron, focused ion beam, atomic electron tomography and atom probe tomography. With over 600 transmission electron microscopes worldwide and approximately 50 coming online each year, the demand and impact of an open-source tomography tool is large. Significant opportunities exist in high-tech industry, universities, and national labs to enable or enhance three-dimensional imaging at the nanoscale and bring automated high-throughput approaches that will accelerate progress in materials characterization and metrology. The project supports a service based business model by enabling lab-specific acquisition and processing customization and integration-support and development that will be provided into Phase III and beyond.

36 MATERIALS SCIENCE↗

Three-dimensional atomic scale characterization of {11$\overline{2}$2} twin boundaries in titanium

The {11$\overline{2}$2}<11$\overline{23}$> compression twin can accommodate a considerable amount of strain under c-axis compression in Ti. However, unlike the tensile twin, the structure of the {10$\overline{1}$2}$\langle$$\overline{1}$011$\rangle$ compressive twins has not been completely characterized. In this study, we apply a combined technique of HR-TEM characterization, topological analysis, and atomistic simulations to explore the facets that bound the {11$\overline{2}$2}<11$\overline{23}$> twin in Ti. In addition to the currently known facets (CTB and B-Py), six new facets are observed and categorized for the first time from atomic-scale TEM observations along five crystallographic directions. The six new facets are (11$\overline{2}$0)//(11$\overline{2}$6), PrPr1, PyPy1, (2$\overline{11}$1)//($\overline{1}$2$\overline{1}$2), (1$\overline{1}$04)//(01$\overline{11}$), and (01$\overline{1}$0)//(2$\overline{11}$4). Results from the topological and computational analysis are in reasonable agreement with and support the HRTEM observations. Specifically, (1) the observed facets align with low-index interfaces in both twin and matrix domains, (2) the facets with lower surface energies are found to form extended interfaces, and (3) high-surface-energy facets are found at the twin tip region and explained by the fact that the energy of the combined facet and facet junction configuration is energetically preferred in the twin tip region. These results not only provide a comprehensive understanding of the 3D structure of the {11$\overline{2}$2}<11$\overline{23}$> compressive twins in Ti, but also validate the MD procedure and the Ti interatomic potential employed. This is extremely important for future study of the {11$\overline{2}$2} twin mobility and interactions with other defects, both features that remain extremely challenging to capture in experiments.

36 MATERIALS SCIENCE↗

FY22 Progress Report: SRNL Analysis of ICCWR LCM and WAMS Data for Corrosion and Cracking

Algorithms for machine learning and data analysis for the 3013 Surveillance Program are being developed in an ongoing collaborative effort by the Savannah River National Laboratory (SRNL) and the University of South Carolina (USC). To detect the presence of corrosion and cracking, data is collected from large binary files generated by a Laser Confocal Microscope (LCM) or Wide Area 3D Measurement System (WAMS). Software is being developed to use the physical attributes in the data files (e.g., height, color, and grayscale values; all as functions of a location in a plane projection) to detect the presence of surface corrosion and cracking. A user-friendly Matlab Graphical User Interface (GUI) that reads data from either LCM or WAMS files was developed to integrate input data with software developed for processing and evaluation. The GUI can selectively download binary data, interrogate data attributes, label data for training ML algorithms, flag significant features, execute Machine Learning (ML) algorithms, output parameters from trained ML algorithms, report ML model accuracy with respect to labeled data, and generate graphical representations for various analyses. Surface defects can be called out by setting user-specified thresholds, feature based analysis or machine learning algorithms. Enhancements to data labeling capability have been developed to address this essential precursor to application of ML routines. Efficient labeling is particularly important in view of the very large volume of data required to train ML algorithms.

3013 Corrosion↗

A density-functional theory study of the Al/AlOx/Al tunnel junction

The aluminum oxide tunnel junction is a key component of the majority of superconducting quantum devices. For high-quality, reproducible, and scalably manufacturable qubits, the ability to fabricate Josephson junctions (JJs) with a targeted critical current and high uniformity is essential. In this study, we use first-principles modeling to assess fundamental aspects of the atomic structure of both amorphous and crystalline aluminum oxide tunnel junctions and relate the structure to predicted performance metrics. We use modified ab initio molecular dynamics to develop realistic models of the tunnel junction, from which interface roughness and local thickness fluctuations are analyzed in an unbiased manner by training a neural network to identify the boundary between metal and oxide. We show that the effective thickness of the insulating part of the junction can be different from the apparent physical thickness. We calculate the rate of Cooper pair tunneling for the atomically resolved electrostatic potential using direct numerical solution in 3D, which shows a channeling effect that impacts the junction critical current. The predicted critical current is a useful JJ design parameter that can be accessed from the ab initio calculations without fitting parameters. To assess the limits of uniformity and fabrication choices (e.g., oxidation vs epitaxy), we compare the amorphous junctions to crystalline models, which show order of magnitude more efficient tunneling compared to the amorphous case, underlining the connection between atomistic structure and Cooper pair tunneling efficiency. Further, this work provides a foundation for ab initio materials design and evaluation to help accelerate future development of improved tunnel junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic analysis of copper current collectors and mechanisms of fragmentation under compressive forces

Extensive fragmentation of copper current collectors was observed after spherical indentation on prismatic and large-format pouch Li-ion cells by 3D X-ray computed tomography (XCT). Microscopic analysis including scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM) and x-ray photoelectron microscopy (XPS) was carried out on copper current collectors from used commercial cells and pristine anodes. The copper-graphite cross-section images showed rough interface areas affected by reactions and diffusion in the used cell. Electron probe micro-analyzer (EPMA) element mapping showed the interface area was rich in oxygen and phosphorus. A detectable amount of phosphorus was also uniformly distributed inside the current collector. The same oxygen and phosphorus distributions were confirmed by STEM/EDS analysis. XPS depth profiles on multiple elements revealed the interface area of the aged anode was rich in Li, F, P, O and C and diffused at least 50 nm into the copper. In comparison, the pristine anode showed a very smooth C/Cu interface. No other elements were detected. For commercial cells, the reactions in the interface area and diffusion of multiple elements into the lattice and grain boundaries were responsible for the embrittlement of the copper current collectors. Finally, permanent cell capacity loss was observed in electrochemical performance of the indented cells.

36 MATERIALS SCIENCE↗

Synthetic fossilization of soft biological tissues and their shape-preserving transformation into silica or electron-conductive replicas

Structural preservation of complex biological systems from the subcellular to whole organism level in robust forms, enabling dissection and imaging while preserving 3D context, represents an enduring grand challenge in biology. Here we report a simple immersion method for structurally preserving intact organisms via conformal stabilization within silica. This self-limiting process, which we refer to as silica bioreplication, occurs by condensation of water-soluble silicic acid proximally to biomolecular interfaces throughout the organism. Conformal nanoscopic silicification of all biomolecular features imparts structural rigidity enabling the preservation of shape and nano-to-macroscale dimensional features upon drying to form a biocomposite and further high temperature oxidative calcination to form silica replicas or reductive pyrolysis to form electrically conductive carbon replicas of complete organisms. Ultimately, the simplicity and generalizability of this approach should facilitate efforts in biological preservation and analysis and could enable the development of new classes of biomimetic composite materials.

59 BASIC BIOLOGICAL SCIENCES↗

The effect of oxygen vacancies on water wettability of transition metal based SrTiO 3 and rare-earth based Lu 2 O 3

Understanding the structural, physical and chemical properties of the surface and interfaces of different metal-oxides and their possible applications in photo-catalysis and biology is a very important emerging research field. Motivated in this direction, this article would enable understanding of how different fluids, particularly water, interact with oxide surfaces. We have studied the water contact angle of 3d transition metal oxide thin films of SrTiO 3 , and of 4f rare-earth oxide thin films of Lu 2 O 3 . These metal oxides were grown using pulsed laser deposition and they are atomically flat and with known orientation and explicitly characterized for their structure and composition. Further study was done on the effects of oxygen vacancies on the water contact angle of the 3d and 4f oxides. For 3d SrTiO 3 oxide with oxygen vacancies, we have observed an increase in hydroxylation with consequent increase of wettability which is in line with the previous reports whereas an interesting opposite trend was seen in the case of rare-earth Lu 2 O 3 oxide. Density functional theory simulations of water interaction on the above mentioned systems have also been presented to further substantiate our experimental findings.

36 MATERIALS SCIENCE↗

Contact-induced spin polarization of monolayer hexagonal boron nitride on Ni(111)

Hexagonal boron nitride (h-BN) is a promising barrier material for graphene spintronics. In this Letter, spin-polarized metastable de-excitation spectroscopy (SPMDS) is employed to study the spin-dependent electronic structure of monolayer h-BN/Ni(111). The extreme surface sensitivity of SPMDS enables us to elucidate a partial filling of the in-gap states of h-BN without any superposition of Ni 3d signals. The in-gap states are shown to have a considerable spin polarization parallel to the majority spin of Ni. The positive spin polarization is attributed to the π-d hybridization and the effective spin transfer to the nitrogen atoms at the h-BN/Ni(111) interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High capacitance density MIS capacitor using Si nanowires by MACE and ALD alumina dielectric

High capacitance density three-dimensional (3D) metal-insulator-semiconductor (MIS) capacitors using Si nanowires (SiNWs) by metal-assisted chemical etching and atomic-layer-deposited alumina dielectric film were fabricated and electrically characterized. A chemical treatment was used to remove structural defects from the nanowire surface, in order to reduce the density of interface traps at the Al{sub 2}O{sub 3}/SiNW interface. SiNWs with two different lengths, namely, 1.3 μm and 2.4 μm, were studied. A four-fold capacitance density increase compared to a planar reference capacitor was achieved with the 1.3 μm SiNWs. In the case of the 2.4 μm SiNWs this increase was ×7, reaching a value of 4.1 μF/cm{sup 2}. Capacitance-voltage (C-V) measurements revealed that, following a two-cycle chemical treatment, frequency dispersion at accumulation regime and flat-band voltage shift disappeared in the case of the 1.3 μm SiNWs, which is indicative of effective removal of structural defects at the SiNW surface. In the case of the 2.4 μm SiNWs, frequency dispersion at accumulation persisted even after the two-step chemical treatment. This is attributed to a porous Si layer at the SiNW tops, which is not effectively removed by the chemical treatment. The electrical losses of MIS capacitors in both cases of SiNW lengths were studied and will be discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detection of Rashba spin splitting in 2D organic-inorganic perovskite via precessional carrier spin relaxation

The strong spin-orbit interaction in the organic-inorganic perovskites tied to the incorporation of heavy elements (e.g., Pb and I) makes these materials interesting for applications in spintronics. In conjunction with a lack of inversion symmetry associated with distortions of the metal-halide octahedra, surfaces and interfaces, or the application of a bias, the Rashba effect (used in spin field-effect transistors and spin filters) has been predicted to be much larger in these materials than in traditional III-V semiconductors such as GaAs. Evidence of strong Rashba coupling has been observed in both 3D (bulk) and 2D perovskites, with the relative role of bulk and surface Rashba contributions in the former case under active debate. The varying size of the reported spin splittings points to the need for more experimental studies of Rashba effects in the organic-inorganic perovskite family of materials. Here, we apply time-resolved circular dichroism techniques to the study of carrier spin dynamics in a 2D perovskite thin film [(BA)2MAPb2I7; BA = CH3(CH2)3NH3, MA = CH3NH3]. Our findings confirm the presence of a Rashba spin splitting via the dominance of precessional spin relaxation induced by the Rashba effective magnetic field (also known as D’yakonov Perel spin relaxation). The size of the Rashba spin splitting in our system was extracted from simulations of the measured spin dynamics incorporating LO-phonon and electron-electron scattering, yielding a value of 10 meV at an electron energy of 50 meV above the band gap, representing a 20 times larger value than in GaAs quantum wells.

36 MATERIALS SCIENCE↗

SRNL Analysis of ICCWR LCM and WAMS data for Corrosion and Cracking (FY2020 Progress Report)

The development of algorithms for machine learning and data analysis for the 3013 Surveillance Program is a collaborative effort by the Savannah River National Laboratory (SRNL) and the University of South Carolina (USC). For corrosion detection, Laser Confocal Microscope (LCM) or Wide Area 3D Measurement System (WAMS) data is extracted from large binary files, with software written to convert the data to physical attributes (e.g. height, color and grayscale values; all as functions of a location in a plane projection). It is the objective of this project to produce a user-friendly interface that incorporated all operations needed to perform surface examination. For this reason, a Matlab-based Graphical User Interface (GUI) was created to integrate data input with software developed for processing and evaluation. In summary, the GUI permits selective downloading of binary data, interrogation of attributes, data labeling, flagging of significant features, execution of Machine Learning (ML) algorithms, output of parameters for trained ML algorithms, reports of ML model accuracy with respect to labeled data, and generation of graphical representations of various analyses.

3013 corrosion↗

TADS: A CFD-based turbomachinery and analysis design system with GUI. Volume 2: User's manual

The primary objective of this study was the development of a computational fluid dynamics (CFD) based turbomachinery airfoil analysis and design system, controlled by a graphical user interface (GUI). The computer codes resulting from this effort are referred to as the Turbomachinery Analysis and Design System (TADS). This document is intended to serve as a user's manual for the computer programs which comprise the TADS system. TADS couples a throughflow solver (ADPAC) with a quasi-3D blade-to-blade solver (RVCQ3D) in an interactive package. Throughflow analysis capability was developed in ADPAC through the addition of blade force and blockage terms to the governing equations. A GUI was developed to simplify user input and automate the many tasks required to perform turbomachinery analysis and design. The coupling of various programs was done in a way that alternative solvers or grid generators could be easily incorporated into the TADS framework.

Myers, R. A.↗

Controlling Axial p-n Heterojunction Abruptness Through Catalyst Alloying in Vapor-Liquid-Solid Grown Semiconductor Nanowires

The p-n junction can be regarded as the most important electronic structure that is responsible for the ubiquity of semiconductor microelectronics today. Efforts to continually scale down the size of electronic components is guiding research to explore the use of nanomaterials synthesized from a bottom-up approach - group-IV semiconductor nanowires being one such material. However, Au-catalyzed synthesis of Si/Si1-x-Gex semiconductor nanowire heterojunctions using the commonly-used vapor-liquid-solid (VLS) growth technique results in diffuse heterojunction interfaces [1], leading to doubts of producing compositionally-sharp p-n junctions using this approach. However, we have recently reported the ability to increase Ge-Si nanowire heterojunction abruptness by VLS synthesis from a Au(1-x)Ga(x) catalyst alloy as shown by EDX analysis in an SEM [2]. In this work, we have extended the use of a AuGa catalyst alloy to produce more compositionally abrupt p-n junction interfaces compared to using pure Au as directly measured by atom probe tomography. As shown in Figure 1(a-b), individual Ge-Si heterostructured nanowires were grown vertically atop Ge(111) microposts. Direct growth on the microposts provides a facile approach to nanowire analysis which circumvents the need to use FIB-based sample preparation techniques. Both nanowires grown from pure Au and a AuGa catalyst alloy were analyzed. The corresponding 3D APT reconstruction of an individual heterostructured nanowire is shown in Figure 1(c) with the corresponding materials labeled. A 1-dimensional composition profile along the analysis direction in Figure 1(d) confirms an increase in heterojunction abruptness for nanowires grown from AuGa (~10nm) compared to nanowires grown from pure Au (~65nm). Analysis of the P distribution within the Si region (Figure 1(e)) indicates that P reaches a constant distribution over approximately 10nm when incorporated through the AuGa catalyst, whereas it continually increases over 100’s of nanometers when incorporated through pure Au. The apparent lower overall P concentration within the nanowire grown from the AuGa alloy suggests that the solubility of P in the alloy is lower compared to pure Au. The ability to controllably increase nanowire p-n junction abruptness is important for nanowire applications as solar cells and tunneling field effect transistors where an increase in device performance is expected from shaper p-n junction interfaces. [1] T.E. Clark et al., Nano Lett. 8 (2008) 1246. [2] D.E. Perea et al., Nano Lett. 11 (2011) 3117. [3] The research was supported through the user program at both the Center for Integrated Nanotechnologies at Los Alamos National Laboratory and the Environmental Molecular Sciences Laboratory at Pacific Northwest National Laboratory.

Environmental Molecular Sciences Laboratory↗

Tailoring Molecular-Scale Contact at Perovskite/Polymeric Hole Transporting Material Interface for Efficient Solar Cells

Perovskite solar cells (PSCs) have delivered more than 25% of power conversion efficiency (PCE) and incorporating polymers as hole transporting layers (HTLs) can further enhance the stability of devices towards the goal of commercialization. Among various polymeric hole transporting materials, poly(triaryl amine) (PTAA) is one of the promising HTL candidates with good stability; however, the hydrophobicity of PTAA causes problematic interfacial contact with perovskite, limiting the device performance. Using molecular side-chain engineering, we successfully constructed a uniform two-dimensional (2D) perovskite interlayer with conjugated ligands, between three-dimensional (3D) perovskites and PTAA. Further, employing conjugated ligands as cohesive elements, perovskite/PTAA interfacial adhesion was significantly improved. As a result, the thin and lateral extended 2D/3D heterostructure enabled the as-fabricated PTAA-based PSCs to achieve a PCE of 23.7%, improved from the 18% of reference devices. Owing to the increased ion migration energy barrier and conformal 2D coating, unencapsulated devices with the new ligands exhibited both superior thermal stability under 60°C heating and moisture stability in ambient conditions.

14 SOLAR ENERGY↗

Phosphorus and boron diffusion paths in polycrystalline silicon gate of a trench-type three-dimensional metal-oxide-semiconductor field effect transistor investigated by atom probe tomography

The dopant (P and B) diffusion path in n- and p-types polycrystalline-Si gates of trench-type three-dimensional (3D) metal-oxide-semiconductor field-effect transistors (MOSFETs) were investigated using atom probe tomography, based on the annealing time dependence of the dopant distribution at 900 °C. Remarkable differences were observed between P and B diffusion behavior. In the initial stage of diffusion, P atoms diffuse into deeper regions from the implanted region along grain boundaries in the n-type polycrystalline-Si gate. With longer annealing times, segregation of P on the grain boundaries was observed; however, few P atoms were observed within the large grains or on the gate/gate oxide interface distant from grain boundaries. These results indicate that P atoms diffuse along grain boundaries much faster than through the bulk or along the gate/gate oxide interface. On the other hand, in the p-type polycrystalline-Si gate, segregation of B was observed only at the initial stage of diffusion. After further annealing, the B atoms became uniformly distributed, and no clear segregation of B was observed. Therefore, B atoms diffuse not only along the grain boundary but also through the bulk. Furthermore, B atoms diffused deeper than P atoms along the grain boundaries under the same annealing conditions. This information on the diffusion behavior of P and B is essential for optimizing annealing conditions in order to control the P and B distributions in the polycrystalline-Si gates of trench-type 3D MOSFETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗