SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The problem statements presented relate mostly to research on prosthetic equipment and means of attaching biomedical and electronic devices to the human body. A patent application for a reliable switching element in a patient assist control units is also described.
An improved high speed power switch with unique turn-off capability was developed. This gate assisted turn-off thyristor (GATT) was rated 1000 volts and 100 amperes with turn-off times of 2 microseconds. Fifty units were delivered for evaluation. In addition, test circuits designed to relate to the series inverter application were built and demonstrated. In the course of this work it was determined that the basic device design is adequate to meet the static characteristics and dynamic turn-off specification. It was further determined that the turn-on specification is critically dependent on the gate drive circuit due to the distributive nature of the cathode-gate geometry. Future work should emphasize design modifications which reduce the gate current required for fast turn-on, thereby opening the way to higher power (current) devices.
The notion is introduced of thermally assisted cavitation by localized fluctuations in capillary forces. Because cavitation in liquids can be closely approximated by an isothermal process, only momentum and mass balances are used to introduce the notion for liquids under mechanical tension. Brief attention is given to developing a stability theory in terms of the stiffness and compliance coefficients for a working fluid. Interestingly, the particular thermodynamic approach taken can be used to suggest experiments relating working fluid performance to meniscus behavior. A correction to the liquid flow equation is suggested.
The test procedure completely tests the functioning of the patient assist device. All modes of operation are included in the test. Patient activated switches may be chosen for use with this device as desired. These switches, however, must be single-pole, single-throw, momentarily-on switches.
A complete parts list for the patient assist device is presented along with the schematic diagrams.
The results are presented of a project of research and development on strategies for optimizing the instructional process, and dissemination of information about the applications of such research to the instructional medium of computer-assisted instruction. Accomplishments reported include construction of the author language INSTRUCT, construction of a practical CAI course in the area of computer science, and a number of investigations into the individualization of instruction, using the course as a vehicle.
A categorization was made of independent variables previously found to be potent in simple perceptual-motor tasks. A computer was then used to generate hypothetical factorial designs. These were evaluated in terms of literature trends and pragmatic criteria. Potential side-effects of machine-assisted research strategy were discussed.
Studies of residential energy use, solar-energy technology for buildings, and the requirements for implementing technology in the housing industry led to a project to develop a solar water heater for apartments. A design study for a specific apartment was used to establish a solar water-heater cost model which is based on plumbing contractor bids and manufacturer estimates. The cost model was used to size the system to minimize the annualized cost of hot water. The annualized cost of solar-assisted gas-energy water heating is found to be less expensive than electric water heating but more expensive than gas water heating. The feasibility of a natural gas utility supplying the auxiliary fuel is evaluated. It is estimated that gas-utilizing companies will find it profitable to offer solar water heating as part of a total energy service option or on a lease basis when the price of new base-load supplies of natural gas reaches $2.50-$3.00 per million Btu.
Photon-assisted tunneling is proposed for the investigation of optical plasma resonances; this is demonstrated by the direct observation of the Ag resonance in appropriate Ag-Al2O3-Al structures. A spectral scan of the ratio of the signals photoinduced by the p and s polarizations shows a large enhancement corresponding to the plasma resonance of Ag.
A study of the turnoff physics in gate-assisted turnoff thyristors (GATT's) leads to a proposed mechanism involving the gate bias acting to prevent a forward voltage from appearing on the cathode rather than, as was previously thought, to sweep out excess carriers. It is shown that cathode shunting can be used in GATT's to virtually eliminate an important failure mode and to decrease the gate voltage needed to produce the desired improvement in turnoff time. Implications for designing GATT's are given, one being that a change in the lateral resistance of the p-base will have opposite effects depending on whether the cathode is shunted or not.
Vacuum-assisted liquid-impregnation treatment for silicon-carbide-reinforced carbon-carbon systems improves resistance of silicon-carbide coating to attack by oxygen at elevated temperatures. Porosity reduction treatment might also be applied to sintering silicon-carbide bodies to increase their density and to make them more resistant to hot gases for use in jet engines.
The results of a program to develop a fast high power thyristor that can operate in switching circuits at frequencies of 10 to 20 kHz with very low power loss are given. Feasibility was demonstrated for a thyristor that blocks 1000V forward and reverse, conducts 200A, turns on in little more than 2 more microseconds with only 2A of gate drive, turns off in 3 microseconds with 2A of gate assist current and has an energy dissipation of only 12 mJ per pulse for a 20 microsecond half sine wave 200A pulse. Data were generated that clearly showed the tradeoffs that can be made between the turn off time and forward drop. The understanding of this relationship is necessary in the selection of deliverable thyristors with turn off times up to 7 microseconds to give improved efficiency in a series resonant dc to dc inverter application.
1,000-volt, 200-ampere gate-assisted turn-off thyristor has been developed for power circuits requiring high efficiency, small size, and low weight. Design features include shunted cathode for high dV/dt capability. Cathode in interdigitated with dynamic gate for fast, low-loss switching. Operating frequency exceeds 20 kHz with overall energy dissipation of less that 12 mJ per pulse for typical 20-microsecond half-sine waveform. Device has turn-on time of 2 microseconds and turn-off time as short as 3 microseconds with only 2 amperes of gate drive.
Following an introductory history, the frozen stress photoelastic method is reviewed together with analytical and experimental aspects of cracks in photoelastic models. Analytical foundations are then presented upon which a computer assisted frozen stress photoelastic technique is based for extracting estimates of stress intensity factors from three-dimensional cracked body problems. The use of the method is demonstrated for two currently important three-dimensional crack problems.
A description is presented of the approaches used to modify the molecular structure generator program, CONGEN. The CONGEN program for constructing structures under constraints has been discussed by Carhart et al. (1975). The modifications reported are to lead to a more efficient structure generation on the basis of a translation of structural data input to the program. From an algorithmic standpoint, CONGEN is successful if it can, in a reasonable amount of time and without exhausting storage resources, produce a list of candidate structures satisfying the chemist's constraints. However, this list is often quite large, and it remains for the chemist to discriminate among the candidates, eventually reducing the possibilities to just one structure. Ways are studied for providing computer assistance in examining and further constraining lists of structural candidates.
The optimization of solar electric propulsion earth-gravity-assist trajectories to the outer planets is presented. Included in the optimization is both earth swingby velocity and swingby date. Mission modes with and without optimal post swingby thrust are compared. Performance suitable for preliminary mission studies is presented for the four major outer planets using circular-coplanar planetary orbits and additional performance is presented for a Saturn Orbiter-Dual Probe mission.
Standard overhaul procedures for U.S. Army helicopter engines require operational vibration acceptance testing after rebuild. Engines frequently experience vibrations which exceed allowable overhaul work requirement limits. The rework/retest cycle for these engines constitute a significant cost penalty to the overhaul center. This paper reviews both analytical and test data which indicate bending critical speeds within the operating speed range of the low-speed power turbine rotor as the cause of most test cell rejections. High-speed balancing techniques are applicable and are capable of significantly reducing this reject rate. A complete prototype computer-assisted high-speed balancing system for assembled T53 and T55 power turbine rotors is described.
The principal aim of the paper is to re-emphasize and focus on both the multidisciplinary nature of the environment assisted cracking or embrittlement phenomenon. The multiplicity of factors involved in the embrittlement process is indicated, the mutual dependence of these factors and the influences of mechanical and environmental conditions are considered, and the interactions of various factors in determining the overall embrittlement response are discussed. The need for an interdisciplinary approach for resolving the major differences and for understanding embrittlement is outlined.