Search NASA⌕ Search

SEARCH · Search NASA

Results for “Assumptions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

From occupants to occupants: A review of the occupant information understanding for building HVAC occupant-centric control

Occupants are the core of the built environment. Traditional Heating, Ventilation, and Air-Conditioning (HVAC) systems operate with predefined schedules and maximum occupancy assumptions with no consideration of specific occupant information. These generalized assumptions usually do not align with the actual demand and result in over-conditioning and occupant discomfort. In recent years, with the aid of Information & Communication Technology (ICT) and Computer Science (CS), it is possible to acquire real-time and accurate occupant information to satisfy the exact thermal requirement through specific HVAC control in one particular built environment. This mechanism is called HVAC “Occupant-centric Control (OCC).” HVAC OCC strategy starts with collecting the occupant’s information (e.g., presence/absence) and then applies it to meet the occupant’s requirement (e.g., thermal comfort). However, even though some research studies and field pilot demonstrations have been devoted to the field of OCC, there is a lack of systematic knowledge about occupant data, which is the principal component of OCC for HVAC researchers and practitioners. To fill this gap, this review paper discusses OCC with a particular emphasis on occupant information and investigates how this information can assist HVAC operation in providing an acceptable built environment in required spaces during the required time. Finally, we provide a fine-grained, comprehensive picture of occupant information, discuss its features, the modalities of information feed-in into the HVAC control, and the application of commonly utilized occupant information for OCC.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Influencing Factors in Atomic Force Microscopy Based Mechanical Characterization of Biological Cells

AFM-based single cell force spectroscopy is increasingly being used to understand many biological health problems like malaria, cancer etc. A reliable diagnostics needs, accurate measurement and a clear understanding of the influencing factors, which may otherwise sour the measured biomechanics. Results from any successful experimentation should be repeatable and error free. For this, a deeper understanding of the sources of uncertainties, which may affect the results is necessary. In order to assure the accuracy of evaluated properties and to avoid misinterpretation of the experimental data, we have categorized the common causes of uncertainties in an AFM force spectroscopy, based on their sources of origin and discussed possible remedies to them. The present work discusses the assumptions involved in AFM-based biomechanical studies (assumptions in contact model, data analysis, instrument calibration etc.) and their implications in overall estimations of mechanical biomarkers like stiffness, and adhesive strength. Advantages and disadvantages of simultaneous measurement of stiffness and adhesiveness from single force-indentation data have also been discussed.

60 APPLIED LIFE SCIENCES↗

An AFM Dynamic Contact Model with Finite Thickness Correction to Study Micro-Rheology of Biological Cells

One of the major sources of error in Atomic Force Microscopy based Force Spectroscopic studies is bottom substrate effect, which comes due to assumption of infinite sample thickness. In the present work, anew experimentally validated mathematical correction for finite thickness of thesample is incorporated into a dynamic indentation model. This model is an extension of Sneddon’s static indentation contact model developed for conical tip indenters by incorporating the tip geometric effects, correction to hydrodynamic drag, viscoelastic nature of the sample and its finite thickness. The new model is applied to extract the viscoelastic properties of primary mesenchymal stem cells (MSC’s) extracted from human bone marrow and HCT-116 aggressive epithelial colorectal cancer cells. The micro-rheological studies indicated the presence of profound influence of infinite thickness assumption depending upon indentation depth and sample thickness at the point of indentation. The present model nullified this error and provided a better estimate of the rheological properties. The tests were conducted over a wide frequency bandwidth (0.5 to 126 Hz) and frequency dependent material properties were analyzed using power law structural damping model. It was found that MSC’s are stiffer and less viscous in nature compared to cancer cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

2032 and 2036 risk enhancement from NEOs in the Taurid stream: Is there a significant coherent component to impact risk?

Impact risk is normally quantified by summing the product of the probability of an event and some measure of its consequences over the set of all possible events. The probability factor is considered to be more objective and is based on the size frequency distribution of Near Earth objects (NEOs) and an implicit assumption of randomness, which can be described as “stochastic risk”. Impact frequency does change with time, however, and there have been episodes in the deep geological past when the flux has been much higher. The hypothesis of “coherent catastrophism” suggests large variations on shorter timescales. It postulates the existence of a “Taurid resonant swarm” (TRS) of debris associated with Comet Encke that is stabilized by Jupiter and in a 7:2 resonance with it. The hypothetical cluster orbits in the broad Taurid stream, which crosses Earth's orbit twice a year at its nodes. Whereas the most extreme and fanciful versions of coherent catastrophism in recent geologic history have been comprehensively refuted, the possibility of a significant component of coherent (time-dependent) risk, associated with non-random correlated events, remains. This paper incorporates recently published data from observational campaigns associated with the Taurid stream. There is no evidence for objects in the Taurid stream that are above the global catastrophe threshold, but the possibility of a few large objects and a significant population of objects the size of the Chelyabinsk or Tunguska bodies has not been eliminated. Eyewitness accounts and comparison of airburst models to ground truth suggest that the Tunguska object was a Beta Taurid. The Tunguska event is probably an outlier when compared to the size frequency distributions under stochastic assumptions, but if there is a significant coherent component it may be representative of events that take place far more frequently, and risk assessments may have underestimated the contribution from airbursts. If so, the Earth will experience increased risk from objects this size, peaking in November 2032 and June 2036. We recommend targeted survey campaigns during these hypothetical TRS node crossings to quantify the population, search for potentially hazardous objects, and identify imminent impactors.

79 ASTRONOMY AND ASTROPHYSICS↗

Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach

Microstructure-based constitutive models for multiphase steels require accurate constitutive properties of the individual phases for component forming and performance simulations. We address this requirement with a combined experimental/theoretical methodology which determines the critical resolved shear stresses and hardening parameters of the constituent phases in QP980, a TRIP assisted steel subject to a two-step quenching and partitioning heat treatment. High energy X-Ray diffraction (HEXRD) from a synchrotron source provided the average lattice strains of the ferrite, martensite, and austenite phases from the measured volume during in situ tensile deformation. The HEXRD data was then input to a computationally efficient, elastic-plastic self-consistent (EPSC) crystal plasticity model which estimated the constitutive parameters of different slip systems for the three phases via a trial-and-error approach. The EPSC-estimated parameters are then input to a finite element crystal plasticity (CPFE) model representing the QP980 tensile sample. The predicted lattice strains and global stress versus strain curves are found to be 8% lower that the EPSC model predicted values and from the HEXRD measurements, respectively. This discrepancy, which is attributed to the stiff secant assumption in the EPSC formulation, is resolved with a second step in which CPFE is used to iteratively refine the EPSC-estimated parameters. Remarkably close agreement is obtained between the theoretically-predicted and experimentally derived flow curve for the QP980 material.

Hu, X. H. (ORCID:0000000277355091)↗

Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V

During the laser-powder bed fusion (L-PBF) process, high laser intensities, short interaction times and highly localized heat input drive large thermal gradients that result in a state of high residual stresses. Generally, the residual stresses that develop during the L-PBF process can compromise the performance of the component. Up to now, the literature has indicated that the magnitude of the residual stresses can be affected by various process parameters. In this study, all process parameters such as laser power and speed are held fixed and the focus is solely on the effect of the laser scan strategy on the three-dimensional residual stress state of L-PBF metallic components. Four Ti-6Al-4V bridge shaped components were built using island and continuous scanning patterns parallel and offset 45° from the sample axes. High-energy X-ray diffraction was used to determine the residual stress field in each of the components. Two of them were re-measured after being partially removed from the build plate. The assumptions implicit in diffraction measurements of stress are reviewed and discussed in depth because the unique microstructure associated with L-PBF Ti-6Al-4V renders the validity of those assumptions uncertain. Specifically, additional data was collected and analyzed to evaluate the relationship between grain scale and macroscopic scale stresses. The observed residual stresses were large, ½ to ¾ of the yield strength, particularly the build direction stresses near the lateral edges of the bridges. Here in this work, the higher stresses were observed in the bridges built via the island scan strategies, chiefly near the edges of the parts.

36 MATERIALS SCIENCE↗

Analytical solution for two-phase flow in a wellbore using the drift-flux model

This paper presents analytical solutions for steady-state, compressible two-phase flow through a wellbore under isothermal conditions using the drift flux conceptual model. Although only applicable to highly idealized systems, the analytical solutions are useful for verifying numerical simulation capabilities that can handle much more complicated systems, and can be used in their own right for gaining insight about two-phase flow processes in wells. The analytical solutions are obtained by solving the mixture momentum equation of steady-state, two-phase flow with an assumption that the two phases are immiscible. These analytical solutions describe the steady-state behavior of two-phase flow in the wellbore, including profiles of phase saturation, phase velocities, and pressure gradients, as affected by the total mass flow rate, phase mass fraction, and drift velocity (i.e., the slip between two phases). Close matching between the analytical solutions and numerical solutions for a hypothetical CO{sub 2} leakage problem as well as to field data from a CO{sub 2} production well indicates that the analytical solution is capable of capturing the major features of steady-state two-phase flow through an open wellbore, and that the related assumptions and simplifications are justified for many actual systems. In addition, we demonstrate the utility of the analytical solution to evaluate how the bottomhole pressure in a well in which CO{sub 2} is leaking upward responds to the mass flow rate of CO{sub 2}-water mixture.

42 ENGINEERING↗

The Method of Finite Averages: A rigorous upscaling methodology for heterogeneous porous media

Rigorous upscaling techniques offer accurate and computationally-efficient strategies for modeling the average behaviors of multi-physical, multiscale phenomena in geological porous media. However, such techniques often rely on a variety of methodological assumptions that prohibit their rigorous application to practical systems (e.g., systems involving heterogeneous porous media, system-scale boundary conditions, and fine-scale dynamics that are not diffusion-dominant). In this work, we aim to formulate an upscaling methodology with few methodological assumptions to provide high levels of model generality and foster the utilization of rigorously-derived upscaled models in practice. In particular, we introduce the Method of Finite Averages (MoFA), a novel upscaling methodology for rigorously modeling heterogeneous porous media and system-scale boundary conditions. We then detail MoFA’s implementation for the advective–diffusive transport of a single species and compare the methodology with classic numerical techniques, as well as other rigorous upscaling techniques, to highlight MoFA’s unique combination of rigor and generality. We then validate the derived model while demonstrating its benefits in three numerical experiments. The results suggest that (1.) the applicability and a priori error guarantees of MoFA models do not directly depend on system geometry, (2.) a model’s applicability and error guarantees can be can arbitrarily expanded and reduced, respectively, with further computational expense, and (3.) downscaling with MoFA provides an efficient strategy for generating accurate pore-scale solutions from upscaled results. Ultimately, the results evidence that upscaled models can be rigorously derived for heterogeneous porous media systems and resolved in a fraction of the time it takes to perform the equivalent pore-scale simulations.

58 GEOSCIENCES↗

Flow adjustment inside homogeneous canopies after a leading edge – An analytical approach backed by LES

A two-dimensional analytical model for describing the mean flow behavior inside a vegetation canopy after a leading edge in neutral conditions was developed and tested by means of large eddy simulations (LES) employing the LES code PALM. The analytical model is developed for the region directly after the canopy edge, the adjustment region, where one-dimensional canopy models fail due to the sharp change in roughness. The derivation of this adjustment region model is based on an analytic solution of the two-dimensional Reynolds averaged Navier–Stokes equation in neutral conditions for a canopy with constant plant area density (PAD). The main assumptions for solving the governing equations are separability of the velocity components concerning the spatial variables and the neglection of the Reynolds stress gradients. These two assumptions are verified by means of LES. To determine the emerging model parameters, a simultaneous fitting scheme was applied to the velocity and pressure data of a reference LES simulation. Furthermore a sensitivity analysis of the adjustment region model, equipped with the previously calculated parameters, was performed varying the three relevant length, the canopy height ( h ), the canopy length and the adjustment length ( L c ), in additional LES. Even if the model parameters are, in general, functions of h / L c , it was found out that the model is capable of predicting the flow quantities in various cases, when using constant parameters. Subsequently the adjustment region model is combined with the one-dimensional model of Massman, which is applicable for the interior of the canopy, to attain an analytical model capable of describing the mean flow for the full canopy domain. As a result, the model is tested against an analytical model based on a linearization approach.

54 ENVIRONMENTAL SCIENCES↗

Better practices for inferring ecosystem water use strategy from eddy covariance data

Eddy covariance data are critical for inferring ecosystem water use strategies. Yet, such inferences are sensitive to a range of assumptions applied across studies, hindering our understanding of water use strategies within and across eddy covariance sites. A recent analysis across 151 FLUXNET2015 and AmeriFlux-FLUXNET datasets found that poor model performance was the key driver of non-robust inferences of ecosystem water use strategies. Here, we leverage this previous analysis to (i) identify the specific assumptions that improve inference model performance across most sites, (ii) explain the mechanisms behind the performance improvements, and (iii) check whether better performance improves water use inference. We find that the common practice of fitting a model to canopy conductance (G c ) derived from the evapotranspiration (ET) observations, rather than to observed ET itself, artificially amplifies data errors and degrades the model performance. Next, accounting for vegetation dynamics by applying a growing season filter or incorporating satellite LAI data improves performance, but the former practice may remove soil water stress periods. Lastly, using the leaf-to-air vapor pressure deficit (VPD l ) derived from ET observations as a model input may artificially inflate performance. Based on these results, we recommend selecting observed ET (rather than derived G c ) as the response variable, carefully accounting for vegetation dynamics, and avoiding derived VPD l as a model input; these best practices improve model performance by c. 20% and robustness by c. 80% across all eddy covariance sites. Nevertheless, the performance improvements do not always correspond to more robust inference of water use strategies, as model parameter selection and surface energy budget closure corrections still strongly influence the ecosystem water use parameter estimation in a site-specific manner.

AmeriFlux↗

Subplane collision probabilities method applied to control rod cusping in 2D/1D

The MPACT code is being jointly developed by the University of Michigan and Oak Ridge National Laboratory. It uses the 2D/1D method to solve neutron transport problems for reactors. The 2D/1D method decomposes the problem into a stack of 2D planes, and uses a high fidelity transport method to resolve all heterogeneity in each plane. These planes are then coupled axially using a lower order solver. Using this scheme, 3D solutions to the transport equation can be obtained at a much lower cost.One assumption made by the 2D/1D method is that the materials are axially homogeneous for each 2D plane. Violation of this assumption requires homogenization, which can significantly reduce the accuracy of the calculation. This paper presents two new subgrid methods to address this issue. The first method is polynomial decusping, a simple correction used to address control rods partially inserted into a 2D plane. The second is the subplane collision probabilities method, which is a more accurate, more robust subgrid method that can be applied to other axial heterogeneities.Each method was applied to a variety of problems. Results were compared to fine mesh solutions which had no axial heterogeneity and to Monte Carlo reference solutions generated using KENO-VI. It was shown that the polynomial decusping method was effective in many cases, but it had some limitations, with 3D pin power errors as high as 25% compared to KENO-VI. In conclusion, the subplane collision probabilities method performed much better, lowering the maximum pin power error to less than 5% in every calculation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Linking classical PRA models to a dynamic PRA

Here, this paper presents a series of methods designed to incorporate classical Probabilistic Risk Assessment (PRA) models such as Event Trees (ETs) and Fault Trees (FTs) into dynamic PRA. In contrast to classical PRA, dynamic PRA couples stochastic methods with system simulators to determine the risks associated with complex systems such as nuclear power plants. Compared with classical PRA methods, they can evaluate with higher resolution the safety impact of timing and sequencing of events on the progression of the accident. As part of a dynamic PRA analysis, it is not uncommon that parts of the system to be analyzed might not require a computationally expensive simulation model. These parts could be in fact modeled by employing classical PRA models (e.g., a FT). Here, we present a set of methods and tools that can be used to link the most common classical PRA models (ETs, FTs, reliability block diagrams and Markov models) to simulation codes such as RELAP5-3D: creating a “hybrid PRA.” In order to show the potential of such an hybrid PRA we employ this method to verify ET modeling assumptions (e.g., success criteria) using a large break loss of coolant accident initiating event as a test case. In this respect, we link a set of FTs from the original PRA to the RELAP5-3D code and perform a hybrid PRA. The FTs are employed to model the control logic of several safety systems and to propagate component failures throughout the system. Provided the generated dynamic PRA data, we show how conservative assumptions in the original PRA can be identified and how such original PRA can be modified by updating success criteria captured by the set of RELAP5-3D simulation runs.

97 - MATHEMATICS AND COMPUTING↗

A new class of asymptotically non-chaotic vacuum singularities

The BKL conjecture, stated in the 1960s and early 1970s by Belinski, Khalatnikov and Lifschitz, proposes a detailed description of the generic asymptotic dynamics of spacetimes as they approach a spacelike singularity. It predicts complicated chaotic behaviour in the generic case, but simpler non-chaotic one in cases with symmetry assumptions or certain kinds of matter fields. Here we construct a new class of four-dimensional vacuum spacetimes containing spacelike singularities which show non-chaotic behaviour. In contrast with previous constructions, no symmetry assumptions are made. Rather, the metric is decomposed in Iwasawa variables and conditions on the asymptotic evolution of some of them are imposed. The constructed solutions contain five free functions of all space coordinates, two of which are constrained by inequalities. We investigate continuous and discrete isometries and compare the solutions to previous constructions. Finally, we give the asymptotic behaviour of the metric components and curvature.

79 ASTRONOMY AND ASTROPHYSICS↗

Microscopically derived potential energy surfaces from mostly structural considerations

A simple procedure to estimate the quadrupole Potential-Energy-Surface (PES) is presented, using mainly structural information, namely the content of the shell model space and the Pauli exclusion principle. Further microscopic properties are implicitly contained through the use of results from the Möller and Nix tables or experimental information. A mapping to the geometric potential is performed yielding the PES. The General Collective Model is used in order to obtain an estimate on the spectrum and quadrupole transitions, adjusting only the mass parameter. First, we test the conjecture on known nuclei, deriving the PES and compare them to known data. We will see that the PES approximates very well the structure expected. Having acquired a certain confidence, we predict the PES of several chain of isotopes of heavy and super-heavy nuclei and at the end we investigate the structure of nuclei in the supposed island of stability. One of the main points to show is that simple assumptions can provide already important information on the structure of nuclei outside known regions and that spectra and electromagnetic transitions can be estimated without using involved calculations and assumptions. The procedure does not allow to calculate binding energies. The method presented can be viewed as a starting point for further improvements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bounded energy exchange as an alternative to the third law of thermodynamics

This paper introduces a postulate explicitly forbidding the extraction of an infinite amount of energy from a thermodynamic system. It also introduces the assumption that no measuring equipment is capable of detecting arbitrarily small energy exchanges. The Kelvin formulation of the second law is reinterpreted accordingly. Then statements related to both the unattainability version and the entropic version of the third law are derived. The value of any common thermodynamic potential of a one-component system at absolute zero of temperature is ascertained if some assumptions with regard to the state space can be made. The point of view is the phenomenological, macroscopic and non-statistical one of classical thermodynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bose–Einstein condensation under the cubic–quintic Gross–Pitaevskii equation in radial domains

We study stationary and quasi-stationary solutions for the cubic–quintic Gross–Pitaevskii equation modeling Bose–Einstein condensates (BECs) in one, two, and three spatial dimensions under the assumption of radial symmetry with the BEC dynamics influenced by a confining potential. We consider both repulsive and attractive cubic interactions – corresponding respectively to repulsive and attractive two-body interactions – under similar frameworks in order to deduce the effects of the potentials in each case. We also carefully consider the role played by the quintic nonlinearity (modeling the strength of inter-atomic coupling) in modifying the solutions arising due to a purely cubic interaction term. In one spatial dimension, we obtain a variety of exact solutions in the zero-potential limit (including new periodic solutions which generalize known soliton solutions) as well as perturbation solutions for small amplitude confining potentials. For more general forms of the confining potential, we rely on numerical simulations, but these agree with the analytical results when the latter are valid. We also consider the limit where the quintic term dominates the cubic term (with such a limit relevant in the study of a Tonks–Girardeau gas). Under the assumption of radial symmetry, we also consider cylindrical (or, cigar-shaped) and spherical BECs. We consider the nonperturbative regime where either the potential or the amplitude of the solutions is large, obtaining various qualitative analytical results. When the kinetic energy term is small (relative to the nonlinearity and the confining potential), we recover the expected Thomas–Fermi approximation for the stationary solutions. Numerical simulations, under a variety of external confining potentials, are then used to understand the role these potentials play on the BEC solution structure for both the attractive and repulsive regimes. This assortment of analytical and numerical results allows us to better understand the structure of BECs modeled via cubic–quintic Gross–Pitaevskii equation under confining potentials with radial symmetry. Some of the results are natural extensions of those for the cubic Gross–Pitaevskii equation, while others appear new.

74 ATOMIC AND MOLECULAR PHYSICS↗

Composite-particle decay widths by the generator coordinate method

We study the feasibility of applying the Generator Coordinate Method (GCM) of self-consistent mean-field theory to calculate decay widths of composite particles to composite-particle final states. The main question is how well the GCM can approximate continuum wave functions in the decay channels. The analysis is straightforward under the assumption that the GCM wave functions are separable into internal and Gaussian center-of-mass wave functions. Two methods are examined for calculating decay widths. In one method, the density of final states is computed entirely in the GCM framework. In the other method, it is determined by matching the GCM wave function to an asymptotic scattering wave function. Both methods are applied to a numerical example and are found to agree within their determined uncertainties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the role of joint probability distributions of incompatible observables in Bell and Kochen–Specker Theorems

Highlights: •Bell and Kochen–Specker theorems rule out local or noncontextual realist models. •Still, they assume a joint probability distribution for incompatible observables. •Those joint probability distributions do not exist in quantum mechanics. •Realist models without joint distributions for incompatible observables are given. •A reformulation of Bell and Kochen–Specker arguments is provided to rule them out. -- Abstract: We analyze the validity of Bell and Kochen–Specker theorems under local (or noncontextual) realism but avoiding an assumption of the existence of a joint probability distribution for incompatible observables. We formulate a realist model which complies with this requirement. This is obtained by employing divergent sequences that nevertheless have marginals which are convergent. We find that under standard reasonable assumptions this possibility does not lead to a loophole of those theorems, by deriving a short of CHSH inequality valid for any finite size ensemble. Moreover, we analyze a Hardy’s paradox setting where noncontextual realism imposes the existence of joint probabilities for incompatible observables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗