Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass Utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Determining aromatic and aliphatic carboxylic acids in biomass-derived oil samples using 2,4-dinitrophenylhydrazine and liquid chromatography-electrospray injection-mass spectrometry/mass spectrometry

Converting biomass to a useful fuel commonly incorporates the pyrolysis of the biomass feed stock. The base liquid fraction usually contains high concentrations of ketones, aldehydes and carboxylic acids, of which each can cause detrimental issues related to the storage and upgrading process. Knowing the carbonyl species and the concentration of each will provide value information to the pyrolysis researchers, specifically as that community branches into more targeted end-products such as jet fuel or biogenic-derived oxygenate-containing fuel products. The analysis of aldehydes, ketones and small alkyl carboxylic acids using 2,4-dinitrophenylhydrazine (DNPH) derivation method has been well documented and the method is commonly used the analytical community. By using liquid chromatograph coupled to tandem mass spectrometry, biomass sample analysis can be complete with identification of most carbonyl species. The issue of identifying isobaric ketone and aldehyde compounds can be resolved by utilizing differences in retention time or characteristic fragment ions of ketones and aldehydes. One issue which could not resolved using published methods was identifying aromatic or large non-aromatic carboxylic acids from their corresponding hydroxyl aldehyde or ketone analogs. By modifying the current method for determining carbonyls in biomass samples, carboxylic and hydroxyl-carbonyl can be determined. A careful adjustment of the pH during the extraction procedure and extended heating time of the DNPH solution allowed for the successful derivation of aromatic carboxylic acids. Like other dinitrophenylhydrazones, carboxylic acid derivatives also produce a unique secondary ion pattern, which was useful to distinguish these species from the non-acid analogs.

bio-oil↗

Internal curing with lightweight aggregate produced from biomass-derived waste

Shrinkage of concrete may lead to cracking and ultimately to a reduction of the service life of concrete structures. Among known methods for shrinkage mitigation, internal curing with porous aggregates was successfully utilized in the last couple of decades for decreasing autogenous and drying shrinkage. In this paper, the internal curing performance of pre-saturated lightweight aggregates produced from biomass-derived waste (bio-LWA) was studied. In the first part of this paper, the microstructure of the bio-LWA is investigated, with special focus on their pore structure and on their water absorption and desorption behavior. The bio-LWA has large porosity and coarse pore structure, which allows them to release the entrained water at early age and counteract self-desiccation and autogenous shrinkage. In the second part, the efficiency of internal curing in mortars incorporating the bio-LWA is examined by neutron tomography, internal relative humidity and autogenous deformation measurements.

36 MATERIALS SCIENCE↗

Filling the cellulosic bio-economy gap by utilizing a wedge approach combined with stakeholder collaboration

The price gap between the market and breakeven prices of cellulosic biomass for farmers represents a significant barrier to the development of a low-carbon cellulosic bioeconomy. Using a bottom-up, agent-based modeling tool that replicates the behaviors and interactions of key stakeholders, this study analyzes the emergence of a cellulosic bioeconomy at the local scale through a wedge approach that examines an integrated portfolio of multiple policy options, including subsidies for small-scale bioproducts and environmental credits. Here, the role of collaboration among multiple stakeholders, such as biomass producers (farmers), bio-refinery industry, government, and society, is assessed for filling the price gap. Using the Sangamon River Basin as a case study site, we evaluate the effectiveness of the wedge approach by comparing simulation results from multiple scenarios, each incorporating different combinations of bioeconomy wedges, with and without stakeholder collaboration. Results underscore that active collaboration among stakeholders acts as a catalyst enlarging the effectiveness of bioeconomy wedges. Including the carbon credits and environmental value in the policy portfolio is found to bridge the price gap through collective contributions from diverse stakeholders, where the cellulosic biofuel and bioproduct industry plays a pivotal role. Although this study is conducted at the local watershed scale, the methodology and findings offer valuable insights for market development in other watersheds and the potential scaling of local markets to regional and national levels.

09 BIOMASS FUELS↗

Data for Filling the Cellulosic Bio-economy Gap by Utilizing a Wedge Approach Combined with Stakeholder Collaboration

The price gap between the market and breakeven prices of cellulosic biomass for farmers represents a significant barrier to the development of a low-carbon cellulosic bioeconomy. Using a bottom-up, agent-based modeling tool that replicates the behaviors and interactions of key stakeholders, this study analyzes the emergence of a cellulosic bioeconomy at the local scale through a wedge approach that examines an integrated portfolio of multiple policy options, including subsidies for small-scale bioproducts and environmental credits. The role of collaboration among multiple stakeholders, such as biomass producers (farmers), bio-refinery industry, government, and society, is assessed for filling the price gap. Using the Sangamon River Basin as a case study site, we evaluate the effectiveness of the wedge approach by comparing simulation results from multiple scenarios, each incorporating different combinations of bioeconomy wedges, with and without stakeholder collaboration. Results underscore that active collaboration among stakeholders acts as a catalyst enlarging the effectiveness of bioeconomy wedges. Including the carbon credits and environmental value in the policy portfolio is found to bridge the price gap through collective contributions from diverse stakeholders, where the cellulosic biofuel and bioproduct industry plays a pivotal role. Although this study is conducted at the local watershed scale, the methodology and findings offer valuable insights for market development in other watersheds and the potential scaling of local markets to regional and national levels.

Economics↗

Development and implementation of an in situ high-resolution isotopic microscope for measuring metabolic interactions in soil mesocosms (Final Report)

Many of our planet’s ecosystems rely on the activities of soil microbial communities. These microbes have significant and wide-ranging effects: they metabolize carbon and other nutrients, interact with plants and fungi, and perform other processes important to soil health. However, our ability to directly observe the enzymatic and metabolic activities of microbes within soil is currently limited, not only by the complexity of soil microbial communities themselves, but also by the lack of experimental tools to study them and their molecular interactions in situ. These challenges hinder our understanding of the life-sustaining processes of biomass decomposition and the manner in which it contributes to the movement of freed carbon within soil ecosystems. Here we aimed to develop a novel ultrahigh-resolution isotopic microscope that combines complementary imaging modalities to gain insights into metabolic cycling in soil. This final report covers both the portion of this work that was initially completed at the University of North Carolina at Chapel Hill from 2018 to 2019 (as award DE-SC0019012) and then from 2020 to 2022 (2023 in NCE) at the University of Massachusetts Chan Medical School. This goal was to build an integrated platform consisting of fluorescence microscopy, Raman microspectroscopy, and nanospray desorption electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (nanoDESI-FTICR-MS) to directly investigate microbial activities and molecular transformations occurring in soil by exploiting the use of both fluorescent labels and stable isotope probing. Specifically, our instrument was conceived as integrating: (A) fluorescence detection to localize soil microbes, identify bacteria taking up polysaccharides, and monitor gene expression of enzymes involved in decomposition; (B) Raman microspectroscopy to determine which microbes incorporate decomposition products into their biomass, as well as which decomposers are metabolically active; and (C) nanoDESI-FTICR-MS imaging to spatially probe, in real-time, the metabolites in the surrounding area, which we expect will reveal the distributions of the products of the enzymatic breakdown of polysaccharides, as well as specialized metabolites acting as cell-cell signals between decomposers. To enable these measurements, we exploited fluorescence-based probes to map the microbes that are enzymatically active (per A) and utilized stable isotope-labeled substrates to visualize both the microbial and molecular fate of decomposed biomass (B and C, respectively). To accomplish our goal, we combined the expertise of a multidisciplinary group of scientists to pursue the construction of this microscope and to investigate scientific questions that would be facilitated by such a capability. We aimed to employ this spatially informative, high-resolution isotopic microscope to visualize the critical steps of biomass degradation and the molecular fate of other environmentally relevant substrates within soil mesocosms. Accordingly, this technology will enhance our understanding of the microbial and metabolic interactions occurring within soil communities that are relevant to carbon degradation and other soil processes. The instrument has been developed and housed at EMSL, where it will be available to the entire EMSL User Base, enabling a variety of related DOE-relevant systems to be interrogated in the future by diverse scientific research groups.

59 BASIC BIOLOGICAL SCIENCES↗

DRI Renewable Energy Center

The primary objective of this project was to utilize a flexible, energy-efficient facility, called the DRI Renewable Energy Experimental Facility (REEF) to support various renewable energy research and development (R&D) efforts, along with education and outreach activities. The REEF itself consists of two separate buildings: (1) a 1200-ft2 off-grid capable house and (2) a 600-ft2 workshop/garage to support larger-scale experimental work. Numerous enhancements were made to DRI's existing renewable power generation systems, and several additional components were incorporated to support operation of the REEF House. The power demands of this house are satisfied by integrating and controlling PV arrays, solar thermal systems, wind turbines, an electrolyzer for renewable hydrogen production, a gaseous-fuel internal combustion engine/generator set, and other components. Cooling needs of the REEF House are satisfied by an absorption chiller, driven by solar thermal collectors. The REEF Workshop includes a unique, solar air collector system that is integrated into the roof structure. This system provides space heating inside the Workshop, as well as a hot water supply. The Workshop houses a custom-designed process development unit (PDU) that is used to convert woody biomass into a friable, hydrophobic char that has physical and chemical properties similar to low grade coal. Besides providing sufficient space for operation of this PDU, the REEF Workshop supplies hot water that is used in the biomass treatment process. The DRI-REEF serves as a working laboratory for evaluating and optimizing the performance of renewable energy components within an integrated, residential-like setting. The modular nature of the system allows for exploring alternative configurations and control strategies. This experimental test bed is also highly valuable as an education and outreach tool both in providing an infrastructure for student research projects, and in highlighting renewable energy features to the public.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Hybrid Pathway to Biojet Fuel via 2,3-Butanediol

Production of biomass-derived sustainable alternative jet fuels (SAJF) has been considered as an important approach to decarbonize the aviation industry but still possesses various challenges in technology advancement, particularly in achieving high carbon efficiency. Here we report a hybrid pathway to SAJF from 2,3-butanediol (2,3-BDO), integrating biologically converting biomass to 2,3-BDO with catalytically upgrading of 2,3-BDO to jet-range hydrocarbons. This pathway is demonstrated to have a high carbon recovery to liquid hydrocarbons from corn stover (25–28%) (74–82% of the theoretical maximum efficiency). The catalytic conversion steps involve 2,3-BDO to C3+ olefins, oligomerization, and hydrogenation where the first two steps are the focus of this study. Under optimum reaction conditions (523 K, 115 kPa, 1.0 h-1 weight hourly space velocity), 2,3-BDO conversion and C3+ olefin selectivity are >97% and 94–98% during 40 h time on stream, respectively. To demonstrate the adaptability of this technology with bio-derived 2,3-BDO, we also investigated the impact of water and other organic coproducts (acetoin and acetic acid) inherited from the fermentation broth on the catalyst performance and product selectivities. We have shown that the catalyst can handle a significant amount of water in the liquid feed (40 wt% water/60 wt% 2,3-BDO) and maintain catalyst stability for ~40 h. Acetoin can be converted to similar C3+ olefins as 2,3-BDO with complete conversion of acetoin. Co-feeding 10 wt% acetoin with 2,3-BDO is found to have no impact on 2,3-BDO conversion, C3+ olefin selectivity, and catalyst stability. The utilization of organic coproduct like acetoin can help to improve overall carbon conversion efficiency when using real biomass-derived 2,3-BDO. On the other hand, the presence of 10 wt% acetic acid is shown to drastically inhibit methyl ethyl ketone (MEK) hydrogenation and butene oligomerization as revealed by the increased MEK and butene selectivities, implying the importance of separating organic acids when feeding bio-derived 2,3-BDO. The formed C3–C6 olefins from 2,3-BDO are further oligomerized over Amberlyst-36 catalyst to longer-chain hydrocarbons with >70 wt% jet-range hydrocarbons including predominantly iso-olefins/iso-paraffins. The overall carbon efficiency for the jet-range hydrocarbons is 19–22%, exceeding most of the reported biojet pathways, which makes it a promising approach for SAJF production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Assessing the potential of polyculture to accelerate algal biofuel production

To date, the algal biofuel industry has focused on the cultivation of monocultures of highly productive algal strains, but scaling up production remains challenging. However, algal monocultures are difficult to maintain because they are easily contaminated by wild algal strains, grazers, and pathogens. In contrast, theory suggests that polycultures (multispecies assemblages) can promote both ecosystem stability and productivity. A greater understanding of species interactions and how communities change with time will need to be developed before polycultures can be successfully applied to large-scale algal production efforts. Here in this paper we review the agricultural and ecological literature to explore opportunities for increased annual biomass production through the use of algal polycultures. We discuss case studies where algal polycultures have been successfully maintained for industries other than the biofuel industry, as well as the few studies that have compared biomass production of algal polycultures to that of monocultures. Assemblages that include species with complementary traits are of particular promise. These assemblages have the potential not only to increase crop productivity and stability, but they may also be capable of utilizing natural resources (e.g. light, nutrients, water) more efficiently via tighter niche packing. Therefore, algal polycultures show promise for enhancing biomass productivity, enabling sustainable production and reducing overall production costs.

09 BIOMASS FUELS↗

Local Resource Assessment: Beetle-Killed Spruce in Alaska

This report synthesizes forest inventory and spatial data from federal and state sources to present a snapshot of beetle-killed spruce across Southcentral and Interior Alaska. This natural resource is under investigation for use in cellulose-based products, particularly building insulation. Research funded by the Department of Energy's ARPA-E program, has successfully developed insulation - Celium - using beetle-killed spruce combined with mycelium, the root network of fungi. The resulting insulation product can be manufactured locally and used across all Alaskan climate zones for residential, commercial, and shipping applications. Removing standing dead wood also contributes to wildfire risk reduction and mitigates associated public health impacts. This Local Resource Assessment, funded by the Denali Commission, contextualizes and reconciles unaligned forestry data sources, establishing a pathway to refined, replicable analysis and, ultimately, presenting estimates of beetle-killed spruce biomass to inform the potential scale and development of a Celium industry.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Microalgae Commodities from Coal-Fired Power Plant Flue Gas CO 2 (Draft Final Report, October 1, 2015 to June 30, 2018)

The Orlando Utilities Commission (OUC) operates an approximately 900-MWe coal fired-power plant at Stanton Energy Center (SEC), which was the site for this project to develop an integrated process for microalgae utilization of flue gas CO 2 for the production of biofuels and animal feeds. Microalgae have both potentially high yields (tons biomass/acre-year) and can be used for biofuels or high value animal feeds. The high biomass yields of microalgae cultures allows efficient use of land and water resources. They can also use wastewaters, recycle fertilizers, and have lower overall greenhouse gas emissions than conventional biofuels or animal feeds. However, many technical issues and technology gaps related to large-scale algae biomass production still must be resolved before such a process can be scaled-up. In this project, techno-economic analyses (TEAs) and life cycle assessments (LCAs) were carried out, projecting the costs and impacts of large-scale algae biomass cultivation for production of biofuels and animal feeds using OUC-SEC flue gas CO 2 . In addition, 3.5-m 2 (~ 40-ft 2 ) experimental raceway ponds were used for the cultivation of microalgae at OUC-SEC and also at the University of Florida. A large-scale algae farm was designed for a 1,300-acre site (~500-ha) located near the OUC-SEC plant, consisting of 400 hectares (1,000 acres) of paddle wheel mixed raceway ponds (each 4 ha), receiving flue gas piped approximately 3 km (2 miles) from the SEC plant. In the first year of this project (Budget Period 1, BP1), the TEA and LCA studies focused on the production of biogas produced from algae biomass and its use to replace coal at the power plant. However, due to the resulting very high cost of CO 2 mitigation, the process was modified to produce compressed natural gas (‘renewable natural gas’, RNG) for transportation fuel from the biogas, in conjunction with wastewater treatment by the algae cultures. During Budget Period 2 (BP2), the TEA and LCA studies focused on the production of animal feeds by the algae farm, using fresh water and agricultural fertilizers. In this case, CO 2 mitigation costs would be entirely covered if the algal biomass could be sold at between a two to three-fold premium above soybean feed, based on a higher nutritional value for the algal biomass. In support of the above analyses, microalgae cultivation experiments were carried out for over two years during this project in small 3.5-m 2 ponds at both SEC and the University of Florida. The most important results were the demonstration at SEC of the cultivation, on flue gas CO 2 , of filamentous algae biomass, which can be harvested at much lower cost than processes required for the colloidal algae species, as currently used by almost all algal mass culture biofuels and animal feeds projects. The yield of biogas production from the algal biomass was investigated by the University of Florida, and the value of the algal biomass as animal feed was projected based on biochemical analysis of the SEC ad UF biomasses. The conclusion from TEA/LCA carried out for the biogas case in BP1 was that a 400-ha algae system producing biomethane for co-firing at OUC-SEC could generate 27,500 MWh/yr of renewable power, offsetting 28,400 Mg CO 2eq /yr, which amounted to less than 1% of the CO 2 emitted by the SEC plant. (Mg = metric ton = 1.10 short tons). The overall cost was projected at $820/Mg of CO 2eq reduction, making this process unfeasible under any possible scenario. More favorable economics were projected when the biogas was converted to higher value transportation fuel, RNG, which also would benefit from renewable fuel (RINs) and possibly other credits. However, only by combining RNG production with municipal wastewater treatment in the algal ponds would CO 2 utilization result in no net cost or even be economically beneficial (i.e., generate income to the power plant). However, in that case the amount of CO 2 utilization would be even lower than that in the biogas case, because a large fraction of the carbon required would be supplied from the wastewater and CO 2 recovered during biogas upgrading to RNG. In brief, use of power plant CO 2 emissions for algal biofuels production was not favorable, even with optimistic assumptions about biomass productivity and biogas yields. For the animal feed case, developed during BP2, algal biomass would replace soybean feeds. The same scale 400-ha algal production plant was projected to produce 26,280 Mg per year of animal feed with a utilization of 45,300 Mg flue gas CO 2 taken up by the algal biomass. However, the process would result in a projected reduction of 112,500 Mg CO 2eq emissions per year, or roughly 1.9% of OUC-SEC emissions, mainly due to the large CO 2eq emissions from conventional soybean production. A major factor in this analysis were greenhouse gas emissions from land use changes. The cost of CO 2 utilization was projected at $116/Mg if the biomass sold for the same price as soybean meal, but if sold as a premium feed (e.g., based on high omega-3 fatty acid and carotenoid content), the power plant could actually charge for the CO 2 utilized. These economic projections are sensitive to assumptions underlying the TEA and LCA models, including biomass composition and the financial models used to project CAPEX and OPEX. Further development of an algal animal feed production using coal-fired power plant flue gas CO 2 is recommended based on the TEA and LCA, as well as experimental results. The required research and development is detailed in a technology gap analysis (Section 11), which focuses on the demonstrations of the cultivation of higher value filamentous algal biomass at OUC-SEC.

01 COAL, LIGNITE, AND PEAT↗

Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing

Because of accelerated urbanization and the development of a global economy, a large quantity of municipal solid waste (MSW) has been collected and disposed of by the municipalities. Due to this drastic increase in the disposal of MSW, the need for its management is a must to preserve the environment. Currently, approximately 50% of the total MSW generated in the United States has been utilized through various recycling, combustion, and composting technologies, which means the remaining 50% is sent to landfill; this is often known as non-recyclable MSW (nMSW). As this nMSW is physically and chemically heterogenous and contains very high amounts of inorganic material, processing is required prior to using it as a biorefinery feedstock. Thus, this study focused on how mechanical preprocessing advanced the physical and chemical properties of nMSW. The physical and chemical properties were investigated in terms of particle size distribution, bulk density, ultimate and proximate analysis, and the higher heating value (HHV). The combustion properties were examined in terms of ignition temperature, peak heat release rate, and combustion efficiency. Results showed that the variability of physical and chemical properties of nMSW can be reduced by mechanical preprocessing. For example, the variability of the bulk density of the as-received nMSW was approximately 17.3% while it reduced to 5.8% when the sample size was reduced to 2 mm. Similarly, the variability of ash and HHV reduced from 49.2% to 11.0% and 13.4%–4.2%, respectively. Combustion thermograms showed that the size reduction positively improved the combustion properties. For example, 2 mm of spec sample started to ignite approximately 4 times earlier and took 6.5 folds less time to reach the peak heating rate compared to as-received nMSW. Overall, the mechanical preprocessing reduced the variability of physical and chemical properties in addition to the improvement of combustion behavior of the nMSW which is one step forward toward the biorefinery feedstock.

09 BIOMASS FUELS↗

A comparative techno-economic analysis of renewable methanol synthesis from biomass and CO 2 : Opportunities and barriers to commercialization

Global demand for methanol as both a chemical precursor and a fuel additive is rising. At the same time, numerous renewable methanol production pathways are under development, which, if commercialized, could provide significant environmental benefits over traditional methanol synthesis pathways. However, it is difficult to compare technologies at different maturity levels, with differing feedstocks, and with significant differences in overall process design. Thus, there is a need to harmonize the analyses of renewable pathways using a consistent techno-economic approach to evaluate the potential for commercialization of various pathways. This analysis uses a novel cross-comparison method to assess near-term and long-term viability of both low- and high-maturity level technologies. Furthermore, the techno-economic assessment considers cost factors critical to market acceptance combined with carbon- and energy-efficiency assessments of three renewable pathways compared with a commercial baseline. We find that biomass gasification to methanol represents a near-term viable pathway with a high technology readiness level and commercially competitive market price. If cost-reducing technological improvements can be realized and scaled up in the CO 2 electrolysis pathways, the potential for higher carbon efficiencies may help drive market adoption of these more modular, direct conversion pathways in future markets as they present an opportunity to better support global decarbonization efforts through efficient waste carbon utilization.

09 BIOMASS FUELS↗

Performance Validation and Scaling of a Capillary Membrane Solid-Liquid Separation System

Algaeventure Systems (AVS) has previously demonstrated an innovative technology for dewatering algae slurries that dramatically reduces energy consumption by utilizing surface physics and capillary action. Funded by a $6M ARPA-E award, transforming the original Harvesting, Dewatering and Drying (HDD) prototype machine into a commercially viable technology has required significant attention to material performance, integration of sensors and control systems, and especially addressing scaling issues that would allow processing extreme volumes of algal cultivation media/slurry. Decoupling the harvesting, dewatering and drying processes, and addressing the rate limiting steps for each of the individual steps has allowed for the development individual technologies that may be tailored to the specific needs of various cultivation systems. The primary performance metric used by AVS to assess the economic viability of its Solid-Liquid Separation (SLS) dewatering technology is algae mass production rate as a function of power consumption (cost), cake solids/moisture content, and solids capture efficiency. An associated secondary performance metric is algae mass loading rate which is dependent on hydraulic loading rate, area-specific hydraulic processing capacity (gpm/in2), filter:capillary belt contact area, and influent algae concentration. The system is capable of dewatering 4 g/L (0.4%) algae streams to solids concentrations up to 30% with capture efficiencies of 80+%, however mass production is highly dependent on average cell size (which determines filter mesh size and percent open area). This paper will present data detailing the scaling efforts to date. Characterization and performance data for novel membranes, as well as optimization of off-the-shelf filter materials will be examined. Third party validation from Ohio University on performance and operating cost, as well as design modification suggestions will be discussed. Extrapolation of current productivities will be used to suggest a design for integration into commercial-scale production.

09 BIOMASS FUELS↗

AI-powered municipal solid waste management: a comprehensive review from generation to utilization

The accumulation of municipal solid waste (MSW) continues to rise due to burgeoning population, rapid global urbanization and economic growth, intensifying ecological concerns associated with landfills and greenhouse gas (GHG) emissions. Over the past 2 decades, global waste generation has surged by 50%, with one-third remaining uncollected and about 70% sent to landfills. This review examines the critical role of integrating emerging technologies, such as advanced sensors and artificial intelligence (AI), into end-to-end MSW management to alleviate landfill burdens. The suitability of various AI tools for different stages of MSW management is assessed, alongside the deployment of advanced sensors including hyperspectral cameras, computer vision systems, and internet of things (IoT) devices for material identification. Applications of genetic algorithms and reinforcement learning for optimizing collection routes, reducing costs, and lowering emissions are highlighted. Life cycle assessment (LCA) across all stages of MSW management is also reviewed, along with future trends in leveraging generative AI, natural language processing (NLP), and agent-based AI systems to analyze waste generation patterns and public sentiment. Efficient collection and handling can be enhanced through route optimization with geographic information systems and real-time bin-level monitoring. Furthermore, sensor-embedded, real-time object detection systems paired with robotics enable material characterization and automated sorting, thereby lowering costs and diverting waste from landfills into value-added products for diverse industrial sectors including packaging, chemicals, textiles, metals and glass, transportation, and electronics industries. Without intervention, global waste is projected to reach 4.54 billion tons by 2050, contributing direct economic costs of $\$$400 billion and roughly 2.38 billion tons of CO 2 -equivalent emissions annually. This review demonstrates how AI-driven, end-to-end solutions for MSW management can mitigate economic and environmental challenges, while directly supporting the United Nations Sustainable Development (UNDP) goals related to innovation and infrastructure (SDG 9), sustainable cities (SDG 11), responsible consumption and production (SDG 12), and climate action (SDG 13).

09 BIOMASS FUELS↗

Evaluation of Gas, Oil and Wood Pellet Fueled Residential Heating System Emissions Characteristics

This study has measured the emissions from a wide range of heating equipment burning different fuels including several liquid fuel options, utility supplied natural gas and wood pellet resources. The major effort was placed on generating a database for the mass emission rate of fine particulates (PM 2.5) for the various fuel types studied. The fine particulates or PM 2.5 (less than 2.5 microns in size) were measured using a dilution tunnel technique following the method described in US EPA CTM-039. The PM 2.5 emission results are expressed in several units for the benefit of scientists, engineers and administrators. The measurements of gaseous emissions of O{sub 2}, CO{sub 2}, CO, NO{sub x} and SO{sub 2} were made using a combustion analyzer based on electrochemical cells These measurements are presented for each of the residential heating systems tested. This analyzer also provides a steady state efficiency based on stack gas and temperature measurements and these values are included in the report. The gaseous results are within the ranges expected from prior emission studies with the enhancement of expanding these measurements to fuels not available to earlier researchers. Based on measured excess air levels and ultimate analysis of the fuel's chemical composition the gaseous emission results are as expected and fall within the range provided for emission factors contained in the US-EPA AP 42, Emission Factors Volume I, Fifth Edition. Since there were no unexpected findings in these gaseous measurements, the bulk of the report is centered on the emissions of fine particulates, or PM 2.5. The fine particulate (PM 2.5) results for the liquid fuel fired heating systems indicate a very strong linear relationship between the fine particulate emissions and the sulfur content of the liquid fuels being studied. This is illustrated by the plot contained in the first figure on the next page which clearly illustrates the linear relationship between the measured mass of fine particulate per unit of energy, expressed as milligrams per Mega-Joule (mg/MJ) versus the different sulfur contents of four different heating fuels. These were tested in a conventional cast iron boiler equipped with a flame retention head burner. The fuels included a typical ASTM No. 2 fuel oil with sulfur below 0.5 percent (1520 average ppm S), an ASTM No. 2 fuel oil with very high sulfur content (5780 ppm S), low sulfur heating oil (322 ppm S) and an ultra low sulfur diesel fuel (11 ppm S). Three additional oil-fired heating system types were also tested with normal heating fuel, low sulfur and ultralow sulfur fuel. They included an oil-fired warm air furnace of conventional design, a high efficiency condensing warm air furnace, a condensing hydronic boiler and the conventional hydronic boiler as discussed above. The linearity in the results was observed with all of the different oil-fired equipment types (as shown in the second figure on the next page). A linear regression of the data resulted in an Rsquared value of 0.99 indicating that a very good linear relationship exits. This means that as sulfur decreases the PM 2.5 emissions are reduced in a linear manner within the sulfur content range tested. At the ultra low sulfur level (15 ppm S) the amount of PM 2.5 had been reduced dramatically to an average of 0.043 mg/MJ. Three different gas-fired heating systems were tested. These included a conventional in-shot induced draft warm air furnace, an atmospheric fired hydronic boiler and a high efficiency hydronic boiler. The particulate (PM 2.5) measured ranged from 0.011 to 0.036 mg/MJ. depending on the raw material source used in their manufacture. All three stoves tested were fueled with premium (low ash) wood pellets obtained in a single batch to provide for uniformity in the test fuel. Unlike the oil and gas fired systems, the wood pellet stoves had measurable amounts of particulates sized above the 2.5-micron size that defines fine particulates (less than 2.5 microns). The fine particulate emissions rates ranged from 22 to 30 mg/ MJ with an average value of 25 mg/MJ for the three stoves tested.

02 PETROLEUM↗

Laboratory Scale Coal And Biomass To Drop-In Fuels (CBDF) Production And Assessment

This Final Technical Report describes the work and accomplishments of the project entitled, “Laboratory Scale Coal and Biomass to Drop-In Fuels (CBDF) Production and Assessment.” The main objective of the project was to fabricate and test a lab-scale liquid-fuel production system using coal containing different percentages of biomass such as corn stover and switchgrass at a rate of 2 liters per day. The system utilizes the patented Altex fuel-production technology, which incorporates advanced catalysts developed by Pennsylvania State University. The system was designed, fabricated, tested, and assessed for economic and environmental feasibility relative to competing technologies.

01 COAL, LIGNITE, AND PEAT↗