Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparison study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Solvent dependent structural perturbations of chemical reaction intermediates visualized by time-resolved x-ray diffraction

Ultrafast time-resolved wide angle x-ray scattering from chemical reactions in solution has recently emerged as a powerful technique for determining the structural dynamics of transient photochemical species. Here we examine the structural evolution of photoexcited CH{sub 2}I{sub 2} in the nonpolar solvent cyclohexane and draw comparisons with a similar study in the polar solvent methanol. As with earlier spectroscopic studies, our data confirm a common initial reaction pathway in both solvents. After photoexcitation, CH{sub 2}I{sub 2} dissociates to form CH{sub 2}I{center_dot}+I{center_dot}. Iodine radicals remaining within the solvent cage recombine with a nascent CH{sub 2}I{center_dot} radical to form the transient isomer CH{sub 2}I-I, whereas those which escape the solvent cage ultimately combine to form I{sub 2} in cyclohexane. Moreover, the transient isomer has a lifetime approximately 30 times longer in the nonpolar solvent. Of greater chemical significance is the property of time-resolved wide angle x-ray diffraction to accurately determine the structure of the of CH{sub 2}I-I reaction intermediate. Thus we observe that the transient iodine-iodine bond is 0.07 A {+-}0.04 A shorter in cyclohexane than in methanol. A longer iodine-iodine bond length for the intermediate arises in methanol due to favorable H-bond interaction with the polar solvent. These findings establish that time-resolved x-ray diffraction has sufficient sensitivity to enable solvent dependent structural perturbations of transient chemical species to be accurately resolved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The metal-insulator transition in vanadium dioxide: A view at bulk and surface contributions for thin films and the effect of annealing

Vanadium dioxide is investigated as potential oxide barrier in spin switches, and in order to incorporate VO{sub 2} layers in complex multilayer devices, it is necessary to understand the relation between bulk and surface/interface properties. Highly oriented VO{sub 2} thin films were grown on (0001) sapphire single crystal substrates with reactive bias target ion beam deposition. In the analysis of the VO{sub 2} films, bulk-sensitive methods [x-ray diffraction (XRD) and transport measurements] and surface sensitive techniques [photoelectron spectroscopy (PES) and scanning tunneling microscopy and spectroscopy] were employed. The samples were subjected to heating cycles with annealing temperatures of up to 425 and 525 K. Prior to annealing the VO{sub 2} films exhibit the transition from the monoclinic to the tetragonal phase with the concurrent change in conductivity by more than a factor of 10{sup 3} and their phase purity is confirmed by XRD. Annealing to 425 K and thus cycling across the metal-insulator transition (MIT) temperature has no impact on the bulk properties of the VO{sub 2} film but the surface undergoes irreversible electronic changes. The observation of the valence band with PES during the annealing illustrates that the surface adopts a partially metallic character, which is retained after cooling. Annealing to a higher temperature (525 K) triggers a modification of the bulk, which is evidenced by a considerable reduction in the MIT characteristics, and a degradation in crystallite morphology. The local measurement of the conductivity with scanning tunneling spectroscopy shows the transition of the surface from predominantly semiconducting surface prior to annealing to a surface with an overwhelming contribution from metallic sections afterward. The spatial distribution of metallic regions cannot be linked in a unique manner to the crystallite size or location within the crystallites. The onset of oxygen depletion at the surface is held responsible for this behavior. The onset of bulk modification at higher temperatures is most likely linked to oxygen loss and effusion along the grain boundaries and concurrent onset of sintering. Our study focuses on the comparison of the MIT in the bulk and at the surface of thin VO{sub 2} layers and establishes an irreversible modification of the crystallite structure and surface for temperatures exceeding the MIT. The surface modification impacts on the strategies which will be employed to build the metallic contacts to VO{sub 2} layers.

36 MATERIALS SCIENCE↗

Al{sub 4}SiC{sub 4} wurtzite crystal: Structural, optoelectronic, elastic, and piezoelectric properties

New experimental results supported by theoretical analyses are proposed for aluminum silicon carbide (Al{sub 4}SiC{sub 4}). A state of the art implementation of the density functional theory is used to analyze the experimental crystal structure, the Born charges, the elastic properties, and the piezoelectric properties. The Born charge tensor is correlated to the local bonding environment for each atom. The electronic band structure is computed including self-consistent many-body corrections. Al{sub 4}SiC{sub 4} material properties are compared to other wide band gap wurtzite materials. From a comparison between an ellipsometry study of the optical properties and theoretical results, we conclude that the Al{sub 4}SiC{sub 4} material has indirect and direct band gap energies of about 2.5 eV and 3.2 eV, respectively.

36 MATERIALS SCIENCE↗

Comment on “Early stage time evolution of a dense nanosecond microdischarge used in fast optical switching applications” [Phys. Plasmas 22, 123518 (2015)]

In an effort to understand the opaque nature of high-voltage nanosecond microdischarges and their ability to block 532 nm nanosecond laser pulses, as demonstrated by Bataller et al. [Appl. Phys. Lett. 105, 223501 (2014)], Levko and Raja have published a paper [Phys. Plasmas 22, 123518 (2015)] which simulates spark discharges in 1 bar of xenon gas. At this ambient pressure, Levko and Raja simulate final electron densities much too low to explain the observed opacity and conclude the probing laser generates the requisite ionization for self-blocking. However, the experimental findings of Bataller et al. showed opacity being reached at 10 bar, an order of magnitude larger than the pressure simulated by Levko and Raja. Furthermore, Bataller et al. showed the spark remained opaque for very low laser intensities, insufficient to cause any significant ionization. Although the simulation performed by Levko and Raja could have merit at 1 bar, it is not an appropriate comparison to the regime studied by Bataller et al.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal stability of simple tetragonal and hexagonal diamond germanium

Here, exotic phases of germanium, that form under high pressure but persist under ambient conditions, are of technological interest due to their unique optical and electrical properties. The thermal evolution and stability of two of these exotic Ge phases, the simple tetragonal (st12) and hexagonal diamond (hd) phases, are investigated in detail. These metastable phases, formed by high pressure decompression in either a diamond anvil cell or by nanoindentation, are annealed at temperatures ranging from 280 to 320 °C for st12-Ge and 200 to 550 °C for hd-Ge. In both cases, the exotic phases originated from entirely pure Ge precursor materials. Raman microspectroscopy is used to monitor the phase changes ex situ following annealing. Our results show that hd-Ge synthesized via a pure form of a-Ge first undergoes a subtle change in structure and then an irreversible phase transformation to dc-Ge with an activation energy of (4.3 ± 0.2) eV at higher temperatures. St12-Ge was found to transform to dc-Ge with an activation energy of (1.44 ± 0.08) eV. Taken together with results from previous studies, this study allows for intriguing comparisons with silicon and suggests promising technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the crossover between high-energy-density plasma and ultracold neutral plasma physics

In this paper, we present ideas that were part of the miniconference on the crossover between High Energy Density Plasmas (HEDP) and Ultracold Neutral Plasmas (UNPs) at the 60th Annual Meeting of the American Physical Society Division of Plasma Physics, November 2018. We give an overview of UNP experiments with an emphasis on measurements of the time-evolving ion density and velocity distributions, the electron-ion thermalization rate, and plasma self-assembly—all just inside the strongly coupled plasma regime. We also present theoretical and computational models that were developed to understand a subset of HEDP experiments. However, because HEDP experiments display similar degrees of strong coupling, many aspects of these models can be vetted using precision studies of UNPs. This comparison is important because some statistical assumptions used for ideal plasmas are of questionable validity in the strongly coupled plasma regime. We summarize two theoretical approaches that extend kinetic theories into the strong-coupling regime and show good agreement for momentum transfer and self-diffusion. As capabilities improve, both computationally and experimentally, UNP measurements may help guide the ongoing development of HEDP-appropriate plasma models. Future opportunities in viscosity, energy relaxation, and magnetized plasmas are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predicting metal–metal interactions. I. The influence of strain on nanoparticle and metal adlayer stabilities

Strain-engineering of bimetallic nanomaterials is an important design strategy for developing new catalysts. In this paper, we introduce an approach for including strain effects into a recently introduced, density functional theory (DFT)-based alloy stability model. The model predicts adsorption site stabilities in nanoparticles and connects these site stabilities with catalytic reactivity and selectivity. Strain-based dependencies will increase the model’s accuracy for nanoparticles affected by finite-size effects. In addition to the stability of small nanoparticles, strain also influences the heat of adsorption of epitaxially grown metal-on-metal adlayers. In this respect, we successfully benchmark the strain-including alloy stability model with previous experimentally determined trends in the heats of adsorption of Au and Cu adlayers on Pt (111). For these systems, our model predicts stronger bimetallic interactions in the first monolayer than monometallic interactions in the second monolayer. We explicitly quantify the interplay between destabilizing strain effects and the energy gained by forming new metal–metal bonds. While tensile strain in the first Cu monolayer significantly destabilizes the adsorption strength, compressive strain in the first Au monolayer has a minimal impact on the heat of adsorption. Hence, this study introduces and, by comparison with previous experiments, validates an efficient DFT-based approach for strain-engineering the stability, and, in turn, the catalytic performance, of active sites in bimetallic alloys with atomic level resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ground state rotational and kinetic temperatures of C 2 molecules in a laser-produced plasma

This study presents an experimental comparison between rotational and kinetic temperatures of molecular species in a laser-produced plasma, utilizing tunable laser absorption spectroscopy. We analyzed high-resolution and time-resolved absorption spectra of 31 rotational transitions within the Phillips A 1 II u –X 1 Σ g 3-0 band of the C 2 molecule, measured from a laser-produced graphite plasma in ~2 Torr argon, within the 771–781 nm spectral range. Spectral fitting provided quantitative state column densities of C 2 rotational energy levels in the ground electronic and vibrational states. Boltzmann analysis revealed thermalized rotational distributions showing rotational temperatures decreasing from 3000 to 600 K within 5–500 μs following the onset of the laser plasma. The measured kinetic and rotational temperatures of C 2 molecules are comparable, suggesting that collisional processes in the laser-produced plasma are sufficient to maintain thermal equilibrium between the C 2 molecules and the Ar background gas.

Absorption spectroscopy↗

Impact of reverse flow induced by a sawtooth anode on the performance of an argon Hall thruster

This study reports the performance comparison of the RAIJIN-66 TAL-type Hall thruster with argon propellant, using two hollow anode designs, one with a simple straight shape and another one with a sawtooth shape. Simulations of the rarefied gas in the sawtooth hollow anode region suggest a successful reversal of the direction of neutral particle flow, with an average increase in the neutral particle density by 15.5% when compared to the straight-shaped hollow anode. This contributes to the improvement in performance across a range of discharge voltages that was measured experimentally. When the thruster is operated with a discharge voltage of 150 V and a flow rate of 70 SCCM, the propellant utilization efficiency with the straight anode is 14%, while with the sawtooth anode it is 25.1%. The anode efficiency reaches in the vicinity of 15% with the sawtooth anode in high voltage conditions, exceeding the efficiencies achieved with the straight anode in the same operating conditions. The optimal magnetic field condition for argon operation and the tuning parameters of the sawtooth anode design for RAIJIN-66 are also discussed.

Satpathy, Dibyesh [Univ. of Tokyo (Japan)] (ORCID:↗

New method of comparison for electron temperature measurements in plasmas using X-ray spectra of heavy elements

Conditions and applicability limits of a new X-ray spectroscopy method for electron temperature measurements in plasmas of heavy elements are considered. The method is based on comparison of spectra under study with those of well diagnosed laser-produced plasmas. To apply the method for diagnosing tungsten plasmas a thorough analysis of laser-produced plasma spectra has been performed. The analysis included investigation of spectrum peculiarities and determination of electron temperatures. Quantitative data were obtained for determining electron temperatures in tungsten plasmas using relative intensities of spectral peaks in the spectral range {lambda} = 3 - 6 nm. (laser plasma)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Population difference gratings produced by unipolar subcycle pulses in a resonant medium

We demonstrate the possibility of inducing, erasing and extra rapidly controlling population difference gratings resulting from coherent interaction of unipolar subcycle pulses with a resonant medium. Gratings can be produced without overlap of pulses in the medium, which is an important distinction of the proposed approach from the traditional one, in which gratings are produced using interference of two or more overlapping quasi-monochromatic light beams. The use of unipolar subcycle pulses ensures faster control over gratings in comparison with bipolar pulses studied by us previously.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The search for shock-excited H{sub 2} in Virgo spirals experiencing ram pressure stripping

We investigate the presence of shock-excited H{sub 2} in four Virgo cluster galaxies that show clear evidence of ongoing ram pressure stripping. Mid-infrared spectral mapping of the rotational H{sub 2} emission lines were performed using the Infrared Spectrograph on board the Spitzer Space Telescope. We target four regions along the leading side of galaxies where the intracluster medium appears to be pushing back the individual galaxy's interstellar medium. For comparison purposes, we also study two regions on the trailing side of these galaxies: a region within an edge-on disk and an extraplanar star-forming region. We find a factor of 2.6 excess of warm H{sub 2}/PAH in our sample relative to the observed fractions in other nearby galaxies. We attribute the H{sub 2}/PAH excess to contributions of shock-excited H{sub 2} which is likely to have been triggered by ongoing ram pressure interaction in our sample galaxies. Ram pressure driven shocks may also be responsible for the elevated ratios of [Fe II]/[Ne II] found in our sample.

79 ASTRONOMY AND ASTROPHYSICS↗

DESTRUCTION OF INTERSTELLAR DUST IN EVOLVING SUPERNOVA REMNANT SHOCK WAVES

Supernova generated shock waves are responsible for most of the destruction of dust grains in the interstellar medium (ISM). Calculations of the dust destruction timescale have so far been carried out using plane parallel steady shocks, however, that approximation breaks down when the destruction timescale becomes longer than that for the evolution of the supernova remnant (SNR) shock. In this paper we present new calculations of grain destruction in evolving, radiative SNRs. To facilitate comparison with the previous study by Jones et al., we adopt the same dust properties as in that paper. We find that the efficiencies of grain destruction are most divergent from those for a steady shock when the thermal history of a shocked gas parcel in the SNR differs significantly from that behind a steady shock. This occurs in shocks with velocities ≳200 km s{sup −1} for which the remnant is just beginning to go radiative. Assuming SNRs evolve in a warm phase dominated ISM, we find dust destruction timescales are increased by a factor of ∼2 compared to those of Jones et al., who assumed a hot gas dominated ISM. Recent estimates of supernova rates and ISM mass lead to another factor of ∼3 increase in the destruction timescales, resulting in a silicate grain destruction timescale of ∼2–3 Gyr. These increases, while not able to resolve the problem of the discrepant timescales for silicate grain destruction and creation, are an important step toward understanding the origin and evolution of dust in the ISM.

79 ASTRONOMY AND ASTROPHYSICS↗

Grain growth of nanocrystalline 3C-SiC under Au ion irradiation at elevated temperatures

Nanocrystalline silicon carbide (SiC) represents an excellent model system for a fundamental study of interfacial (grain boundary) processes under nuclear radiation, which are critical to the understanding of the response of nanostructured materials to high-dose irradiation. This study reports on a comparison of irradiation effects in cubic phase SiC (3C-SiC) grains of a few nanometers in size and single-crystal 3C-SiC films under identical Au ion irradiation to a range of doses at 700 K. In contrast to the latter, in which lattice disorder is accumulated to a saturation level without full amorphization, the average grain size of the former increases with dose following a power-law trend. In addition to coalescence, the grain grows through atomic jumps and mass transport, where irradiation induced vacancies at grain boundaries assist the processes. It is found that a higher irradiation temperature leads to slower grain growth and a faster approach to a saturation size of SiC nanograins. The results could potentially have a positive impact on structural components of advanced nuclear energy systems.

Environmental Molecular Sciences Laboratory↗

Exploring the fusion power plant design space: comparative analysis of positive and negative triangularity tokamaks through optimization

The optimal configuration choice between positive triangularity (PT) and negative triangularity (NT) tokamaks for fusion power plants hinges on navigating different operational constraints rather than achieving specific plasma performance metrics. This study presents a systematic comparison using constrained multi-objective optimization with the integrated FUsion Synthesis Engine (FUSE) framework. Over 200 000 integrated design evaluations were performed exploring the trade-offs between capital cost minimization and operational reliability (maximizing q 95 ) while satisfying engineering constraints including 250 ± 50 MW net electric power, tritium breeding ratio > 1.1, power exhaust limits and an hour flattop time. Both configurations achieve similar cost-performance Pareto fronts through contrasting design philosophies. PT, while demonstrating resilience to pedestal degradation (compensating for up to 40% reduction), are constrained to larger machines (R 0 > 6.5 m) by the narrow operational window between L–H threshold requirements and the research-established power exhaust limit (P sol /R < 15 MW m –1 ). This forces optimization through comparatively reduced magnetic field (∼8 T). NT configurations exploit their freedom from these constraints to access compact, high-field designs (R 0 ~ 5.5 m, B 0 >12 T), creating natural synergy with advancing HTS technology. Sensitivity analyses reveal that PT’s economic viability depends critically on uncertainties in L–H threshold scaling and power handling limits. Notably, a 50% variation in either could eliminate viable designs or enable access to the compact design space. These results suggest configuration selection should be risk-informed: PT offers the lowest-cost path when operational constraints can be confidently predicted, while NT is robust to large variations in constraints and physics uncertainties.

FUSE framework↗

Selection of the silicon sensor thickness for the Phase-2 upgrade of the CMS Outer Tracker

During the operation of the CMS experiment at the High-Luminosity LHC the silicon sensors of the Phase-2 Outer Tracker will be exposed to radiation levels that could potentially deteriorate their performance. Previous studies had determined that planar float zone silicon with n-doped strips on a p-doped substrate was preferred over p-doped strips on an n-doped substrate. The last step in evaluating the optimal design for the mass production of about 200 m$^{2}$ of silicon sensors was to compare sensors of baseline thickness (about 300 μm) to thinned sensors (about 240 μm), which promised several benefits at high radiation levels because of the higher electric fields at the same bias voltage. This study provides a direct comparison of these two thicknesses in terms of sensor characteristics as well as charge collection and hit efficiency for fluences up to 1.5 × 10$^{15}$ n$_{eq}$/cm$^{2}$. The measurement results demonstrate that sensors with about 300 μm thickness will ensure excellent tracking performance even at the highest considered fluence levels expected for the Phase-2 Outer Tracker.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Joint linkage and association mapping of complex traits in shrub willow (Salix purpurea L.)

Abstract Background and Aims Increasing energy demands and the necessity to reduce greenhouse gas emissions are key motivating factors driving the development of lignocellulosic crops as an alternative to non-renewable energy sources. The effects of global climate change will require a better understanding of the genetic basis of complex adaptive traits to breed more resilient bioenergy feedstocks, like willow (Salix spp.). Shrub willow is a sustainable and dedicated bioenergy crop, bred to be fast-growing and high-yielding on marginal land without competing with food crops. In a rapidly changing climate, genomic advances will be vital for the sustained improvement of willow and other non-model bioenergy crops. Here, joint genetic mapping was used to exploit genetic variation garnered from both recent and historical recombination events in S. purpurea. Methods A panel of North American naturalized S. purpurea accessions and full-sib F2S. purpurea population were genotyped and phenotyped for a suite of morphological, physiological, pest and disease resistance, and wood chemical composition traits, collected from multi-environment and multi-year replicated field trials. Controlling for population stratification and kinship in the association panel and spatial variation in the F2, a comprehensive mixed model analysis was used to dissect the complex genetic architecture and plasticity of these important traits. Key Results Individually, genome-wide association (GWAS) models differed in terms of power, but the combined approach, which corrects for yearly and environmental co-factors across datasets, improved the overall detection and resolution of associated loci. Although there were few significant GWAS hits located within support intervals of QTL for corresponding traits in the F2, many large-effect QTL were identified, as well as QTL hotspots. Conclusions This study provides the first comparison of linkage analysis and linkage disequilibrium mapping approaches in Salix, and highlights the complementarity and limits of these two methods for elucidating the genetic architecture of complex bioenergy-related traits of a woody perennial breeding programme.

Plant Sciences↗

Searching water megamasers by using mid-infrared spectroscopy (I): Possible mid-infrared indicators

ABSTRACT Water megamasers at 22 GHz with a gas disc configuration in galaxies provide the most precise measurements of supermassive black hole masses, as well as independent constraints on the Hubble constant in the nearby universe. The existence of other maser types, such as jet or outflow masers, represents another tracer for AGN science. However, the detection rate of water megamasers in galaxies is extremely low. Over 40 yr, only ∼ 160 galaxies are found to harbour maser emission, and ∼30 per cent of them show features in their maser emission that indicate a disc-like geometry. Therefore, increasing the detection rate of masers is a crucial task to allow expanding on maser studies. We present a comparison of mid-infrared spectroscopic data between a maser galaxy sample and a Seyfert 2 control sample. We find that maser galaxies show significant peculiarities in their mid-infrared spectra: (1) Maser galaxies tend to present stronger silicate absorption at τ9.7 $\mu\mathrm{ m}$ than the control sample, (2) PAH 11.3 $\mu$m emission in maser galaxies is much weaker than in the control sample, (3) spectral indices at 20–30 $\mu$m are steeper in maser galaxies than in the control sample and tend to be mid-infrared enhanced population. We conclude that there may be good indicators in mid-infrared and far-infrared which could differentiate maser and non-maser Seyfert 2 galaxies. Upcoming infrared facilities, such as the James Webb Space Telescope, may be able to exploit these and other useful criteria and tracers for water megamaser observations.

Lam, Man I.↗