Search NASA⌕ Search

SEARCH · Search NASA

Results for “Defect modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

In-Situ Transmission Electron Microscopy Study of the Evolution of Extended Defects in Oxide Nuclear Fuels

In-situ transmission electron microscopy (TEM) with simulated extreme environments is an effective tool for understanding and tracking microstructural changes down to the atomic scale. The objective of this research is to study the effect of temperature on the evolution of extended defects in ThO2 and UO2. Here, we present in-situ TEM isochronal thermal annealing experiments using a micro-electro-mechanical-system (MEMS)-based heating holder. ThO2 and UO2 single crystal specimens were grown inside an inert silver ampoule using hydrothermal synthesis. Both samples were irradiated using 2 MeV protons at 600oC up to 0.1 dpa at Texas A&M University’s Accelerator Laboratory. Fig. 1a shows a weak-beam dark field TEM image of ThO2 after irradiation, indicating the presence of faulted 1/3 <111> type dislocation loops. This presentation will discuss the effect of annealing temperature (600oC, 800oC, 1000oC, 1100oC, etc.) on dislocation loop density, size and distribution, loop nature (interstitial/vacancies) and Burgers vector, as well as the formation of voids in both ThO2 and UO2. This work will also discuss the interaction between defects during annealing. The in-situ TEM annealing cycle is shown in Fig 1b. This research significantly improves the understanding of defect behavior in oxide nuclear fuels with temperature and will aid computational modeling efforts. This work was supported as part of the Center for Thermal Energy Transport under Irradiation (TETI) Energy Frontier Research Center, funded by the U.S. Department of Energy Office of Science.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Deep learning of accurate force field of ferroelectric HfO 2

The discovery of ferroelectricity in HfO 2 -based thin films opens up new opportunities for using this silicon-compatible ferroelectric to realize low-power logic circuits and high-density nonvolatile memories. The functional performances of ferroelectrics are intimately related to their dynamic responses to external stimuli such as electric fields at finite temperatures. Molecular dynamics is an ideal technique for investigating dynamical processes on large length and time scales, though its applications to new materials are often hindered by the limited availability and accuracy of classical force fields. Here we present a deep neural network–based interatomic force field of HfO 2 learned from ab initio data using a concurrent learning procedure. The model potential is able to predict structural properties such as elastic constants, equation of states, phonon dispersion relationships, and phase transition barriers of various hafnia polymorphs with accuracy comparable with density functional theory calculations. Here, the validity of this model potential is further confirmed by the reproduction of experimental sequences of temperature-driven ferroelectric-paraelectric phase transitions of HfO 2 with isobaric-isothermal ensemble molecular dynamics simulations. We suggest a general approach to extend the model potential of HfO 2 to related material systems including dopants and defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Neutron studies of gauge field and charge in Ih heavy-water ice

The distinctive character of water ice results from the partially disordered combination of covalent and hydrogen bonds in the network of hydrogen and oxygen atoms. The nontrivial hydrogen correlations we report in diffuse neutron scattering are analytically fit via a description of this state as a topological system exhibiting an emergent gauge field. This enables the density of correlation-terminating point defects to be decided as one defect per 500 oxygen sites at 30 K. Application of an analytical model of ice paves the way towards a detailed understanding of this ubiquitous solid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Structural properties of plastically deformed SrTiO 3 and KTaO 3

Dislocation engineering has the potential to open new avenues toward the exploration and modification of the properties of quantum materials. Strontium titanate (SrTi⁢O 3 , STO) and potassium tantalate (KTa⁢O 3 , KTO) are incipient ferroelectrics that show metallization and superconductivity at extremely low charge-carrier concentrations and have been the subject of resurgent interest. These materials also exhibit remarkable ambient-temperature ductility, and thus represent exceptional platforms for studies of the effects of deformation-induced dislocation structures on electronic properties. Recent work on plastically deformed STO revealed an enhancement of the superconducting transition temperature and the emergence of local ferroelectricity and magnetism near self-organized dislocation walls. Here, in this work, we present a comprehensive structural analysis of plastically deformed STO and KTO, employing specially designed strain cells, diffuse neutron and x-ray scattering, Raman scattering, and nuclear magnetic resonance (NMR). Diffuse scattering and NMR provide insight into the dislocation configurations and densities and their dependence on strain. As in the prior work on STO, Raman scattering reveals evidence for local ferroelectric order near dislocation walls in plastically deformed KTO. Our findings provide valuable information about the self-organized defect structures in both materials, and they position KTO as a second model system in which to explore the associated emergent physics.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Advance High Temperature Inspection Capabilities for Small Modular Reactors: Part 1 - Ultrasonics

The project objective was to investigate the development non-destructive evaluation techniques for advanced small modular reactors (aSMR), where the research sought to provide key enabling inspection technologies needed to support the design and maintenance of reactor component performance. The project tasks for the development of inspection techniques to be applied to small modular reactor are being addressed through two related activities. The first is focused on high temperature ultrasonic transducers development (this report Part 1) and the second is focused on an advanced eddy current inspection capability (Part 2). For both inspection techniques the primary aim is to develop in-service inspection techniques that can be carried out under standby condition in a fast reactor at a temperature of approximately 250°C in the presence of liquid sodium. The piezoelectric material and the bonding between layers have been recognized as key factors fundamental for development of robust ultrasonic transducers. Dielectric constant characterization of bismuth scantanate-lead titanate ((1-x)BiScO 3 -xPbTiO 3 ) (BS-PT) has shown a high Curie temperature in excess of 450°C , suitable for hot stand-by inspection in liquid metal reactors. High temperature pulse-echo contact measurements have been performed with BS-PT bonded to 12.5 mm thick 1018-low carbon steel plate from 20C up to 260 C. High temperature air-backed immersion transducers have been developed with BS-PT, high temperature epoxy and quarter wavlength nickel plate, needed for wetting ability in liquid sodium. Ultrasonic immersion measurements have been performed in water up to 92C and in silicone oil up to 140C. Physics based models have been validated with room temperature experimental data with benchmark artifical defects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Quantitative measurements of dislocations in metals for advancing predictive simulations

LLNL applications require scientists to predict how materials evolve under various thermomechanical conditions. While this is achieved through physics-based simulations, uncertainty in the predictions of mechanical properties remains a serious challenge that limits the predictive capabilities of models because we lack methods to compare predictions of atomic-scale defects (dislocations) with experimental measurements. High energy X-ray diffraction (HEXRD) is the most relevant technique that can provide the necessary statistical information on dislocations. However, this technique is not yet quantitative because we lack a precise understanding of the relationship between X-ray diffraction patterns and the underlying material dislocation content and arrangements. To address this need, we used our novel computational X-ray diffraction method to simulate the effect of dislocations on the diffraction patterns. We compared virtual and experimental diffraction patterns. Results allowed us to clearly establish the relationship between X-ray diffraction patterns and the underlying dislocation structures, proving that it is feasible to quantitatively measure dislocation statistics with HEXRD. This project delivered a method that can provide the missing piece to LLNL’s mechanical property simulations in advanced metals by obtaining experimentally long-needed quantitative dislocation data, which could fully enable predictive capabilities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

pvcracks: trained VAE model

The resulting model weights for the variational autoencoder for solar cell crack parametrization to be loaded into the python code for other to use

14 SOLAR ENERGY↗
DOE OSTI2022

Listeria monocytogenes requires cellular respiration for NAD+ regeneration and pathogenesis

Cellular respiration is essential for multiple bacterial pathogens and a validated antibiotic target. In addition to driving oxidative phosphorylation, bacterial respiration has a variety of ancillary functions that obscure its contribution to pathogenesis. We find here that the intracellular pathogen Listeria monocytogenes encodes two respiratory pathways which are partially functionally redundant and indispensable for pathogenesis. Loss of respiration decreased NAD + regeneration, but this could be specifically reversed by heterologous expression of a water-forming NADH oxidase (NOX). NOX expression fully rescued intracellular growth defects and increased L. monocytogenes loads >1000-fold in a mouse infection model. Consistent with NAD + regeneration maintaining L. monocytogenes viability and enabling immune evasion, a respiration-deficient strain exhibited elevated bacteriolysis within the host cytosol and NOX expression rescued this phenotype. These studies show that NAD + regeneration represents a major role of L. monocytogenes respiration and highlight the nuanced relationship between bacterial metabolism, physiology, and pathogenesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Magnetic Fluctuations in Niobium Pentoxide

Using a spin-polarized muon beam we were able to capture magnetic dynamics in an amorphous niobium pentoxide thin film. Muons are used to probe internal magnetic fields produced by defects. Magnetic fluctuations could be described by the dynamical Kubo-Toyabe model considering a time-dependent local magnetic field. We state that observed fluctuations result from the correlated motion of electron spins. We expect that oxygen vacancies play a significant role in these films and lead to a complex magnetic field distribution which is non-stationary. The characteristic average rate of magnetic field change is on the order of 100~MHz. The observed dynamics may provide insight into potential noise sources in Nb-based superconducting devices, while also highlighting the limitations imposed by amorphous oxides.

Krasnikova, Y.↗
DOE OSTI2020

Analysis of tow architecture variability in biaxially braided composite tubes

Spatial deviations in composite braid unit cell dimensions limit mechanical performance and are challenging to model. Full-field measurements of the irregular tow placement in biaxially braided composite tubes were obtained by digital image correlation. Analysis of the reconstructed tow paths showed long-range defects along the hoop direction with short-range defects dominating the biased tow direction. A route toward numerical simulation of the composite response is established by developing a 3D model of the composite using the measured tow trajectories. Finally, a comparison to previously-published triaxial braid results indicates axial tows work to constrain unit cells dimensions along the hoop direction.

3-Dimensional reinforcement↗
DOE OSTI2023

Structure and Site Evolution of Framework Ni Species in MIL-127 MOFs for Propylene Oligomerization Catalysis

A mixed-valence oxotrimer metal–organic framework (MOF), Ni-MIL-127, with a fully coordinated nickel atom and two iron atoms in the inorganic node, generates a missing linker defect upon thermal treatment in helium (>473 K) to engender an open coordination site on nickel which catalyzes propylene oligomerization devoid of any cocatalysts or initiators. This catalyst is stable for ~20 h on stream at 500 kPa and 473 K, unprecedented for this chemistry. The number of missing linkers on synthesized and activated Ni-MIL-127 MOFs is quantified using temperature-programmed oxidation, 1 H nuclear magnetic resonance spectroscopy, and X-ray absorption spectroscopy to be ~0.7 missing linkers per nickel; thus, a majority of Ni species in the MOF framework catalyze propylene oligomerization. In situ NO titrations under reaction conditions enumerate ~62% of the nickel atoms as catalytically relevant to validate the defect density upon thermal treatment. Propylene oligomerization rates on Ni-MIL-127 measured at steady state have activation energies of 55–67 kJ mol –1 from 448 to 493 K and are first-order in propylene pressures from 5 to 550 kPa. Density functional theory calculations on cluster models of Ni-MIL-127 are employed to validate the plausibility of the missing linker defect and the Cossee–Arlman mechanism for propylene oligomerization through comparisons between apparent activation energies from steady-state kinetics and computation. Here this study illustrates how MOF precatalysts engender defective Ni species which exhibit reactivity and stability characteristics that are distinct and can be engineered to improve catalytic activity for olefin oligomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

PCI analysis of a commercial PWR using BISON fuel performance code

Through the early 2000’s, nuclear fuel cladding failure resulting from pellet-cladding interaction in commercial pressurized water reactor fuel was managed successfully by incorporating power ramp restrictions. Within the past decade, however, cladding failures have again begun to appear, often correlated to missing pellet surface defects, and further aggravated by modern reactor operating strategies demanding higher fuel duty operations. In response, renewed efforts in fuel behavior modeling and simulation are being pursued to improve our understanding of the conditions that can lead to missing pellet surface related cladding failure. This paper describes a methodology used to model pellet-cladding interaction related failures observed in commercial pressurized water reactors using the BISON fuel performance code developed at Idaho National Laboratory. In order to accomplish this goal, a three-step process is followed: 1) A failure-stress threshold is developed by using BISON code to model ramp test with known pellet-clad interaction related failures, 2) BISON analysis is applied to a commercial pressurized water reactor cycle startup with one rod confirmed to contain a missing pellet surface defect, and 3) an missing pellet surface sensitivity study of a cycle startup of the same commercial pressurized water reactor which contained a failed fuel rod of un-identified type. The analysis results described in this paper serve to illustrate the BISON code capabilities for modeling pressurized water reactor fuel subjected to higher duty power events.

Nuclear Science & Technology↗
DOE OSTI2018

Physical Principles of Self-Consistent Simulation of the Generation of Interface States and the Transport of Hot Charge Carriers in Field-Effect Transistors Based on Metal–Oxide–Semiconductor Structures

A detailed simulation of degradation (caused by hot charge carriers) based on self-consistent consideration of the transport of charge carriers and the generation of defects at the SiO{sub 2}/Si interface is carried out for the first time. The model is tested using degradation data obtained with decananometer n-type-channel field-effect transistors. It is shown that the mutual influence of the above aspects is significant and their independent simulation gives rise to considerable quantitative errors. In calculations of the energy distribution for charge carriers, the actual band structure of silicon and such mechanisms as impact ionization, scattering at an ionized impurity, and also electron–phonon and electron–electron interactions are taken into account. At the microscopic level, the generation of defects is considered as the superposition of single-particle and multiparticle mechanisms of breakage of the Si–H bond. A very important applied aspect of this study is the fact that our model makes it possible to reliably assess the operating lifetime of a transistor subjected to the effects of “hot” charge carriers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Modeling antiphase boundary energies of Ni 3 Al-based alloys using automated density functional theory and machine learning

Antiphase boundaries (APBs) are planar defects that play a critical role in strengthening Ni-based superalloys, and their sensitivity to alloy composition offers a flexible tuning parameter for alloy design. Here, we report a computational workflow to enable the development of sufficient data to train machine-learning (ML) models to automate the study of the effect of composition on the (111) APB energy in Ni 3 Al-based alloys. We employ ML to leverage this wealth of data and identify several physical properties that are used to build predictive models for the APB energy that achieve a cross-validation error of 0.033 J m –2 . We demonstrate the transferability of these models by predicting APB energies in commercial superalloys. Moreover, our use of physically motivated features such as the ordering energy and stoichiometry-based features opens the way to using existing materials properties databases to guide superalloy design strategies to maximize the APB energy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Test Results of the CERN HL-LHC low- Quadrupole Short Models MQXFS3c and MQXFS4

For the High Luminosity Upgrade of the CERN Large Hadron Collider, lower * quadrupole magnets based on advanced Nb3Sn conductors will be installed on each side of the ATLAS and CMS experiment insertion zones. As part of the technological developments needed to achieve the required field gradient of 132.6 T/m within a 150-mm aperture, short length model magnets, named MQXFS, are tested both at the CERN SM18 and FERMI Lab test facilities. The model magnets rely on two types of Nb3Sn conductors (RRP and PIT) and on an innovative bladders and keys design to provide mechanical support against the Lorentz forces. In 2016 and 2017, the powering tests of the first two models MQXFS3 (RRP) and MQXFS5 (PIT) proved that nominal performance (16.5 kA) could be reached with excellent memory of the quench current after thermal cycle. However both magnets showed a slow training behavior with clear observations of voltage disturbances before the quench. Besides MQXFS5 only could reach ultimate current (17.9 kA) whereas erratic behavior was observed on MQXFS3 due to conductor local degradation at the head of one of the coil. In 2018, this limiting coil was changed and the applied azimuthal pre-stress increased. If ultimate current could then be reached, no stable current could be maintained due to identified defect on the outer layer of the new coil. Finally the outcome of the test of the new model MQXFS4, featuring the final RRP conductors that will be used for the series production and variation on the inner layer quench heater designs are here reported in details.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Multi-scale modeling of the electric field assisted sintering process

The electric field assisted sintering (EFAS) process involves tightly coupled physics that influence microstructural evolution in the particles being compacted. It is also an inherently multi-scale phenomenon, with the microstructure of the compact influencing the subsequent engineering-scale response of the sintering system. To improve understanding of how processing parameters influence microstructural evolution, we have developed a multi-scale modeling approach that couples a continuum-level model of the sintering system with a phase-field model for microstructural evolution of particles within the compact. The phase-field model couples the effect of chemical and electrical driving forces on microstructural evolution and includes the effect of charged defect segregation to surfaces and grain boundaries; this segregation leads to enhanced defect transport and heat generation at these interfaces in response to applied electric field. The effect of enhanced heat generation on particle neck growth and the influence of microstructural evolution on the engineering-scale model are demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multi-scale modeling of the electric field assisted sintering process

The electric field assisted sintering (EFAS) process involves tightly coupled physics that influence microstructural evolution in the particles being compacted. It is also an inherently multi-scale phenomenon, with the microstructure of the compact influencing the subsequent engineering-scale response of the sintering system. To improve understanding of how processing parameters influence microstructural evolution, we have developed a multi-scale modeling approach that couples a continuum-level model of the sintering system with a phase-field model for microstructural evolution of particles within the compact. The phase-field model couples the effect of chemical and electrical driving forces on microstructural evolution and includes the effect of charged defect segregation to surfaces and grain boundaries; this segregation leads to enhanced defect transport and heat generation at these interfaces in response to applied electric field. The effect of enhanced heat generation on particle neck growth and the influence of microstructural evolution on the engineering-scale model are demonstrated.

36 - MATERIALS SCIENCE↗