Search NASA⌕ Search

SEARCH · Search NASA

Results for “Directed Evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

In-situ Transmission Electron Microscopy and Spectroscopy Studies of Interfaces in Li-ion Batteries: Challenges and Opportunities

The critical challenge facing the lithium ion battery development is the basic understanding of the structural evolution during the cyclic operation of the battery and the consequence of the structural evolution on the properties of the battery. Although transmission electron microscopy (TEM) and spectroscopy have been evolved to a stage such that it can be routinely used to probe into both the structural and chemical composition of the materials with a spatial resolution of a single atomic column, a direct in-situ TEM observation of structural evolution of the materials in lithium ion battery during the dynamic operation of the battery has never been reported. This is related to three factors: high vacuum operation of a TEM; electron transparency requirement of the region to be observed, and the difficulties dealing with the liquid electrolyte of lithium ion battery. In this paper, we report the results of exploring the in-situ TEM techniques for observation of the interface in lithium ion battery during the operation of the battery. A miniature battery was fabricated using a nanowire and an ionic liquid electrolyte. The structure and chemical composition of the interface across the anode and the electrolyte was studied using TEM imaging, electron diffraction, and electron energy loss spectroscopy. In addition, we also explored the possibilities of carrying out in-situ TEM studies of lithium ion batteries with a solid state electrolyte.

74 ATOMIC AND MOLECULAR PHYSICS↗

Correlations between quasi-coherent fluctuations and the pedestal evolution during the inter-edge localized modes phase on DIII-D

Direct measurements of the pedestal recovery during an edge-localized mode cycle provide evidence that quasi-coherent fluctuations (QCFs) play a role in the inter-ELM pedestal dynamics. Using fast Thomson scattering measurements, the pedestal density and temperature evolutions are probed on sub-millisecond time scales to show a fast recovery of the density gradient compared to the temperature gradient. The temperature gradient appears to provide a drive for the onset of quasi-coherent fluctuations (as measured with the magnetic probe and the density diagnostics) localized in the pedestal. The amplitude evolution of these QCFs tracks the temperature gradient evolution including its saturation. Such correlation suggests that these QCFs play a key role in limiting the pedestal temperature gradient. The saturation of the QCFs coincides with the pressure gradient reaching the kinetic-ballooning mode (KBM) critical gradient as predicted by EPED1. Furthermore, linear microinstability analysis using GS2 indicates that the steep gradient is near the KBM threshold. Thus, the modeling and the observations together suggest that QCFs are consistent with dominant KBMs, although microtearing cannot be excluded as subdominant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TIDAL DISRUPTIONS IN CIRCUMBINARY DISKS. I. STAR FORMATION, DYNAMICS, AND BINARY EVOLUTION

In our current interpretation of the hierarchical structure of the universe, it is well established that galaxies collide and merge with each other during their lifetimes. If massive black holes (MBHs) reside in galactic centers, we expect them to form binaries in galactic nuclei surrounded by a circumbinary disk. If cooling is efficient enough, the gas in the disk will clump and trigger stellar formation in situ. In this first paper we address the evolution of the binary under the influence of the newly formed stars, which form individually and also clustered. We use smoothed particle hydrodynamics techniques to evolve the gas in the circumbinary disk and to study the phase of star formation. When the amount of gas in the disk is negligible, we further evolve the system with a high-accurate direct-summation N-body code to follow the evolution of the stars, the innermost binary and tidal disruption events (TDEs). For this, we modify the direct N-body code to include (1) treatment of TDEs and (2) 'gas cloud particles' that mimic the gas, so that the stellar clusters do not dissolve when we follow their infall on to the MBHs. We find that the amount of stars disrupted by either infalling stellar clusters or individual stars is as large as 10{sup -4} yr{sup -1} per binary, higher than expected for typical galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of a vortical structure associated with the bursting event in a channel flow

The temporal evolution of a horseshoe vortex structure in a channel is investigated by a numerical simulation. A spectral numerical method is employed to integrate the time-dependent, three-dimensional Navier-Stokes equations. The initial vortical structure is obtained by applying a conditional sampling technique to a data base generated from a direct simulation of a turbulent channel flow. The evolution of this vortical structure under the influence of the self-induced motion and the mean shear is presented. It is shown that the initial sheet-like vortical structure rolls up into a vortex tube as it is convected downstream. Turbulence structures associated with the vortex stretching are investigated. Production of vorticity stretching is high inside the vortex legs, although it is also substantial in the tip region and above the legs. High Reynolds shear stress is produced near the tip of the vortex.

Kim, J.↗

Direct imaging of plasma waves using ultrafast electron microscopy

A femtosecond plasma imaging modality based on a new development of ultrafast electron microscope is introduced. We investigated the laser-induced formation of high-temperature electron microplasmas and their subsequent non-equilibrium evolution. Based on a straightforward field imaging principle, we directly retrieve detailed information about the plasma dynamics, including plasma wave structures, particle densities, and temperatures. We discover that directly subjected to a strong magnetic field, the photo-generated microplasmas manifest in novel transient cyclotron echoes and form new wave states across a broad range of field strengths and different laser fluences. Intriguingly, the transient cyclotron waves morph into a higher frequency upper-hybrid wave mode with the dephasing of local cyclotron dynamics. The quantitative real-space characterizations of the non-equilibrium plasma systems demonstrate the feasibilities of a new microscope system in studying the plasma dynamics or transient electric fields with high spatiotemporal resolutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Models of Protocellular Structure, Function and Evolution

In the absence of any record of protocells, the most direct way to test our understanding, of the origin of cellular life is to construct laboratory models that capture important features of protocellular systems. Such efforts are currently underway in a collaborative project between NASA-Ames, Harvard Medical School and University of California. They are accompanied by computational studies aimed at explaining self-organization of simple molecules into ordered structures. The centerpiece of this project is a method for the in vitro evolution of protein enzymes toward arbitrary catalytic targets. A similar approach has already been developed for nucleic acids in which a small number of functional molecules are selected from a large, random population of candidates. The selected molecules are next vastly multiplied using the polymerase chain reaction.

New, Michael H.↗

SUPERMASSIVE BLACK HOLE BINARY EVOLUTION IN AXISYMMETRIC GALAXIES: THE FINAL PARSEC PROBLEM IS NOT A PROBLEM

During a galaxy merger, the supermassive black hole (SMBH) in each galaxy is thought to sink to the center of the potential and form an SMBH binary; this binary can eject stars via three-body scattering, bringing the SMBHs ever closer. In a static spherical galaxy model, the binary stalls at a separation of about a parsec after ejecting all the stars in its loss cone-this is the well-known final parsec problem. Earlier work has shown that the centrophilic orbits in triaxial galaxy models are key in refilling the loss cone at a high enough rate to prevent the black holes from stalling. However, the evolution of binary SMBHs has never been explored in axisymmetric galaxies, so it is not clear if the final parsec problem persists in these systems. Here we use a suite of direct N-body simulations to follow SMBH binary evolution in galaxy models with a range of ellipticity. For the first time, we show that mere axisymmetry can solve the final parsec problem; we find the SMBH evolution is independent of N for an axis ratio of c/a = 0.8, and that the SMBH binary separation reaches the gravitational radiation regime for c/a = 0.75.

79 ASTRONOMY AND ASTROPHYSICS↗

High glucose up-regulates microRNA-34a-5p to aggravate fibrosis by targeting SIRT1 in HK-2 cells

Highlights: • The expression of SIRT1 is declined and the level of miR-34a-5p is up-regulated in the kidneys of DN mice. • SIRT1 prevents TGF-β1-induced pro-fibrotic gene expression. • SIRT1 expression was declined time-dependently under high glucose in HK-2 cells. • MiR-34a-5p aggravate fibrosis through directly suppressing SIRT1. • MiR-34a-5p inhibitor reverse the expressions of downstream genes through SIRT1 in HK-2 cells. Tubulointerstitial fibrosis (TIF) is crucial in the development of renal fibrosis in diabetic nephropathy(DN). Previous data shows that SIRT1 plays an important role on fibrosis, but the effect on TIF in DN and underlying mechanisms remains uncertain. In this study, we evaluated the vital role of SIRT1 and identified SIRT1 as a downstream target gene of microRNA-34a-5p (miR-34a-5p) in TIF of DN. The result revealed that expression of miR-34a-5p, fibronectin(FN),collagen type I (COL1) and transforming growth factor β1 (TGF-β1) were up-regulated accompanied by the corresponding down-regulation of SIRT1 in renal tissues of high fat diet and streptozotocin(HFD/STZ)induced diabetic mice with DN, and that the SIRT1 mRNA level was negatively correlated with miR-34a-5p expression in high glucose stimulated human proximal tubule cell line(HK-2) cells. We then demonstrated that overexpression of SIRT1 reduced, whereas small interfering RNA targeting SIRT1 enhanced the expressions of TGF-β1 and fibrosis-related genes including FN and COL1 in HK-2 cells. Furthermore, we identified that miR-34a-5p directly suppressed SIRT1 to increase the profibrogenic effects of TGFβ1 through targeting the 3'untranslated region of SIRT1. The functional correlation of miR-34a-5p induced SIRT1 decrease was supported by overexpression and inhibition of miR-34a-5p in HK-2 cells. All the results reveal that SIRT1 which is vital in the evolution of renal TIF in DN can be directly suppressed by miR-34a-5p, and suggest that miR-34a-5p is a new target for DN treatment.

60 APPLIED LIFE SCIENCES↗

Phase evolution of conversion-type electrode for lithium ion batteries

Batteries with conversion-type electrodes exhibit higher energy storage density but suffer much severer capacity fading than those with the intercalation-type electrodes. The capacity fading has been considered as the result of contact failure between the active material and the current collector, or the breakdown of solid electrolyte interphase layer. Here, using a combination of synchrotron X-ray absorption spectroscopy and in situ transmission electron microscopy, we investigate the capacity fading issue of conversion-type materials by studying phase evolution of iron oxide composited structure during later-stage cycles, which is found completely different from its initial lithiation. The accumulative internal passivation phase and the surface layer over cycling enforce a rate-limiting diffusion barrier for the electron transport, which is responsible for the capacity degradation and poor rate capability. This work directly links the performance with the microscopic phase evolution in cycled electrode materials and provides insights into designing conversion-type electrode materials for applications.

25 ENERGY STORAGE↗

Fe-N 4 O-C Nanoplates Covalently Bonding on Graphene for Efficient CO 2 Electroreduction and Zn-CO 2 Batteries

Electrochemical carbon dioxide (CO 2 ) reduction into value-added products holds great promise in moving toward carbon neutrality but remains a grand challenge due to lack of efficient electrocatalysts. Herein, the nucleophilic substitution reaction is elaborately harnessed to synthesize carbon nanoplates with a Fe-N 4 O configuration anchored onto graphene substrate (Fe-N 4 O-C/Gr) through covalent linkages. Density functional theory calculations demonstrate the unique configuration of Fe-N 4 O with one oxygen (O) atom in the axial direction not only suppresses the competing hydrogen evolution reaction, but also facilitates the desorption of *CO intermediate compared with the commonly planar single-atomic Fe sites. The Fe-N 4 O-C/Gr shows excellent performance in the electroreduction of CO 2 into carbon monoxide (CO) with an impressive Faradaic efficiency of 98.3% at -0.7 V versus reversible hydrogen electrode (RHE) and a high turnover frequency of 3511 h -1 . Furthermore, as a cathode catalyst in an aqueous zinc (Zn)-CO 2 battery, the Fe-N 4 O-C/Gr achieves a high CO Faradaic efficiency (≈91%) at a discharge current density of 3 mA cm -2 and long-term stability over 74 h. Here this work opens up a new route to simultaneously modulate the geometric and electronic structure of single-atomic catalysts toward efficient CO 2 conversion.

25 ENERGY STORAGE↗

Design of a supervisory control system for autonomous operation of advanced reactors

Advanced reactors to be deployed in the coming decades will face deregulated energy markets, and may adopt flexible operation to boost profitability. To aid in the transition from baseload to flexible operation paradigm, autonomous operation is sought. This work focuses on the control aspect of autonomous operation. Specifically, a hierarchical control system is designed to support constraint enforcement during routine operational transients. Within the system, data-driven modeling, physics-based state observation, and classical control algorithms are integrated to provide an adaptable and robust solution. A 320 MW Fluoride-cooled High-temperature Pebble-bed Reactor is the design basis for demonstrating the proposed control system. The hierarchical control system consists of a supervisory layer and low-level layer. The supervisory layer receives requests to change the system's operating conditions (e.g., the current reactor power to meet a load -follow), and accepts or rejects them based on constraints that have been assigned. Constraints are issued to keep the plant within an optimal operating region. The low-level layer interfaces with the actuators of the system to fulfill requested changes, while maintaining tracking and regulation duties. Further, to accept requests at the supervisory layer, the Reference Governor algorithm was adopted. To model the dynamics of the reactor, a system identification algorithm, Dynamic Mode Decomposition, was utilized. To estimate the evolution of process variables that cannot be directly measured (e.g., the propagation of delayed neutron precursors), the Unscented Kalman Filter, incorporating a nonlinear model of nuclear dynamics, was adopted. The composition of these algorithms led to a numerical demonstration of constraint enforcement during a 40% power drop transient (at a rate of 5 %/min). Uncontrolled secondary-side temperatures were successfully constrained. Adaptability of the proposed system was demonstrated by modifying the constraint values, and enforcing them during the transient. Robustness was also demonstrated by enforcing constraints under noisy environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion

We present the main results from an experimental investigation into the consequences of various microstructural features, created by laser powder bed fusion (LPBF) and subsequent heat treatments (HTs), in alloy Mar-M-509 on several aspects of plastic deformation including mechanical anisotropy and elongation-to-fracture (ETF). To ensure successful manufacturing of the alloy, porosity fraction and distribution are first characterized using micro X-ray computed tomography. Next, grain structure, crystallographic texture, and regions of recrystallization in the studied microstructures are measured using electron backscattered diffraction (EBSD). Lastly, chemistry, distribution, and morphological features of carbide phases are extracted using electron microscopy and X-ray diffraction. Strength in tension and compression are measured at room temperature for different initial microstructures created by variations in manufacturing conditions and sample orientations with respect to sample processing frame. While the strength of the alloy varies with sample orientation by approximately 30% in the as-built condition, the alloy is softer, more ductile, and approximately isotropic after HT. These results are discussed and critically compared with the data reported for the as-cast material. The alloy manufactured via LPBF is found to be significantly stronger and more ductile than the same alloy produced by casting. The interesting deformation behavior characteristics of the samples in different conditions are explained in terms of their microstructures. EBSD measurements reveal evolution from columnar grains along the build direction favoring a moderately strong <001> fiber texture in the as-built material to equiaxed grains favoring the {110}<001> Goss texture component after subsequent HTs. The major change in grain structure and texture is a result of recrystallization. While carbide phases precipitate primarily at dendrite and cellular interfaces in the as-built material, these phases are both intra-and inter-granular within the HT materials and coarsen with HT duration. These microstructural observations formed bases to rationalize the observed mechanical behavior of the alloy. With this being said, tailoring the alloy performance characteristics with HTs is reported on.

36 MATERIALS SCIENCE↗

A new class of finite element variational multiscale turbulence models for incompressible magnetohydrodynamics

New large eddy simulation (LES) turbulence models for incompressible magnetohydrodynamics (MHD) derived from the variational multiscale (VMS) formulation for finite element simulations are introduced. The new models include the variational multiscale formulation, a residual-based eddy viscosity model, and a mixed model that combines both of these component models. Each model contains terms that are proportional to the residual of the incompressible MHD equations and is therefore numerically consistent. Moreover, each model is also dynamic, in that its effect vanishes when this residual is small. The new models are tested on the decaying MHD Taylor Green vortex at low and high Reynolds numbers. The evaluation of the models is based on comparisons with available data from direct numerical simulations (DNS) of the time evolution of energies as well as energy spectra at various discrete times. Thus a numerical study, on a sequence of meshes, is presented that demonstrates that the large eddy simulation approaches the DNS solution for these quantities with spatial mesh refinement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal cycling-driven microstructural changes of eutectic Al–Si phase change materials in SS304 containers revealed by multi-modal imaging

Aluminum-based Al–Si alloys are widely used as phase change materials (PCMs) in thermal energy storage (TES) systems owing to their high volumetric latent heat and superior thermal conductivity. However, their long-term reliability is limited by degradation processes that remain insufficiently understood. In this work, we employ a multimodal, correlative characterization framework to systematically resolve the degradation behavior of eutectic Al–Si PCMs in contact with SS304 containers under repeated thermal cycling. By integrating high-resolution electron microscopy, three-dimensional X-ray fluorescence (3D XRF) imaging, and differential scanning calorimetry (DSC), we directly link spatially resolved compositional and microstructural evolution to changes in thermophysical properties. The correlative analysis reveals that elemental leaching of Fe, Cr, and Ni from the stainless-steel container into the PCM drives the formation of intermetallic compounds (IMCs) both at the interface and within the bulk PCM, leading to pronounced compositional heterogeneity. These interfacial reactions and diffusion-induced transformations progressively destabilize the Al–Si eutectic, reducing the effective phase-transforming fraction. Consistent with these observations, DSC measurements show a decrease in melting temperature and latent heat of fusion with thermal cycling. These results underscore the critical influence of interfacial reactions and material compatibility on the stability, durability, and overall performance of Al–Si-based TES systems.

25 ENERGY STORAGE↗

Polyaspartic Acid Concentration Controls the Rate of Calcium Phosphate Nanorod Formation in High Concentration Systems

Polyelectrolytes are known to greatly affect calcium phosphate (CaP) mineralization. The reaction kinetics as well as the CaP phase, morphology and aggregation state depend on the relative concentrations of the polyelectrolyte and the inorganic ions in a complex, nonlinear manner. This study examines the structural evolution and kinetics of polyaspartic acid (pAsp) directed CaP mineralization at high concentrations of polyelectrolytes, calcium, and total phosphate (19–30 mg/mL pAsp, 50–100 mM Ca 2+ , Ca/P = 2). Using a novel combination of characterization techniques including cryogenic transmission electron microscopy (cryo-TEM), spectrophotometry, X-ray total scattering pair distribution function analysis, and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), it was determined that the CaP mineralization occurred over four transition steps. The steps include the formation of aggregates of pAsp stabilized CaP spherical nanoparticles (sNP), crystallization of sNP, oriented attachment of the sNP into nanorods, and further crystallization of the nanorods. The intermediate aggregate sizes and the reaction kinetics were found to be highly polymer concentration dependent while the sizes of the particles were not concentration dependent. Furthermore, this study demonstrates the complex role of pAsp in controlling the mechanism as well as the kinetics of CaP mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the Structure–Activity Relationship in Aerobic Alcohol Oxidation over a Metal–Organic-Framework-Supported Molybdenum(VI) Catalyst

The understanding of structure–activity relationships at the atomic level has played a profound role in heterogeneous catalysis, providing valuable insights into designing suitable heterogeneous catalysts. However, uncovering the detailed roles of how such active species’ structures affect their catalytic performance remains a challenge owing to the lack of direct structural information on a specific active species. Herein, we deposited molybdenum(VI), an active species in oxidation reactions, on the Zr 6 node of a mesoporous zirconium-based metal–organic framework (MOF) NU-1200, using solvothermal deposition in MOFs (SIM). Due to the high crystallinity of the NU-1200 support, the precise structure of the resulting molybdenum catalyst, Mo-NU-1200, was characterized through single-crystal X-ray diffraction (SCXRD). Two distinct anchoring modes of the molybdenum species were observed: one mode (Mo1), displaying an octahedral geometry, coordinated to the node through one terminal oxygen atom and the other mode (Mo2) coordinated to two adjacent Zr 6 node oxygen atoms in a tetrahedral geometry. To investigate the role of base in the catalytic activity of these Mo centers, we assessed the activity of Mo-NU-1200 for the aerobic oxidation of 4-methoxybenzyl alcohol as a model reaction. The results revealed that Mo-NU-1200 exhibited remarkably higher catalytic reactivity under base-free conditions, while the presence of base inhibited the catalytic reactivity of this species. SCXRD studies revealed that the molybdenum binding motifs (structures of the supported metal on the Zr 6 node in the MOF) changed over the course of the reactions. Following the oxidation without base, both pristine coordination modes (Mo1 and Mo2) evolved into a new coordination mode (Mo3), in which the molybdenum atom coordinated to two adjacent oxygen atoms from the Zr 6 node in an octahedral geometry, while in the presence of base, the pristine Mo1 coordination mode evolved entirely into the pristine Mo2. Here, this study demonstrates the direct observation of an active species’ structural evolution from metal installation to subsequent catalytic reaction. As a result, these subtle structural changes in catalyst binding motifs led to distinct differences in catalytic activities, providing a compelling strategy for elucidating structure–activity relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Free-carrier-induced soliton fission unveiled by in situ measurements in nanophotonic waveguides

Solitons are localized waves formed by a balance of focusing and defocusing effects. These nonlinear waves exist in diverse forms of matter yet exhibit similar properties including stability, periodic recurrence and particle-like trajectories. One important property is soliton fission, a process by which an energetic higher-order soliton breaks apart due to dispersive or nonlinear perturbations. Here we demonstrate through both experiment and theory that nonlinear photocarrier generation can induce soliton fission. Using near-field measurements, we directly observe the nonlinear spatial and temporal evolution of optical pulses in situ in a nanophotonic semiconductor waveguide. We develop an analytic formalism describing the free-carrier dispersion (FCD) perturbation and show the experiment exceeds the minimum threshold by an order of magnitude. We confirm these observations with a numerical nonlinear Schrodinger equation model. Finally, these results provide a fundamental explanation and physical scaling of optical pulse evolution in free-carrier media and could enable improved supercontinuum sources in gas based and integrated semiconductor waveguides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic fingerprint of fractionalized excitations in single-crystalline Cu3Zn(OH)6FBr

Abstract Beyond the absence of long-range magnetic orders, the most prominent feature of the elusive quantum spin liquid (QSL) state is the existence of fractionalized spin excitations, i.e., spinons. When the system orders, the spin-wave excitation appears as the bound state of the spinon-antispinon pair. Although scarcely reported, a direct comparison between similar compounds illustrates the evolution from spinon to magnon. Here, we perform the Raman scattering on single crystals of two quantum kagome antiferromagnets, of which one is the kagome QSL candidate Cu 3 Zn(OH) 6 FBr, and another is an antiferromagnetically ordered compound EuCu 3 (OH) 6 Cl 3 . In Cu 3 Zn(OH) 6 FBr, we identify a unique one spinon-antispinon pair component in the E 2g magnetic Raman continuum, providing strong evidence for deconfined spinon excitations. In contrast, a sharp magnon peak emerges from the one-pair spinon continuum in the E g magnetic Raman response once EuCu 3 (OH) 6 Cl 3 undergoes the antiferromagnetic order transition. From the comparative Raman studies, we can regard the magnon mode as the spinon-antispinon bound state, and the spinon confinement drives the magnetic ordering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗