Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The Austin Chalk/Eagle Ford Field Laboratory (ACEFFL)

This project, led by Texas A&M University, developed a science-based field laboratory in the Austin Chalk/Eagle Ford Shale Formation to determine the stimulated reservoir volume created by the fracturing of multiple wells. Utilizing newly developed monitoring solutions, the team delivered comprehensive high-quality field data on the extent and morphologies of productive fractures created from these wells. Advanced field monitoring was complemented by laboratory testing on cores and drill cuttings, and coupled modeling for design, prediction, calibration, and code validation. The Austin Chalk/Eagle Ford Field Laboratory (ACEFFL) was hosted by SM Energy, which provided access to the wells of opportunity.

02 PETROLEUM↗

Development of a Low-Cost Particulate Matter Monitor

We describe a small, inexpensive portable monitor for airborne particulates, composed of the following elements: a. A simple size-selective inlet (vertical elutriator) that permits only particles below a pre-set diameter to pass and enter the measurement section; b. A measurement section in which passing particles are deposited thermophoretically on a micro-fabricated resonant piezoelectric mass sensor; c. An optical characterization module co-located with the mass sensor module that directs infrared and ultraviolet beams through the deposit. The emergent optical beams are detected by a photodiode. The optical absorption of the deposit can be measured in order to characterize the deposit, and determine how much is due to diesel exhaust and/or environmental tobacco smoke; and d. A small pump that moves air through the device, which may also be operated in a passive mode. The component modules were designed by the project team, and fabricated at UCB andLBNL. Testing and validation were performed in a room-sized environmental chamber at LBNL in to which was added either environmental tobacco smoke (ETS, produced by a cigarette smoking machine) or diesel exhaust (from a conventional diesel engine). Two pilot field tests in a dwelling compared the monitor with existing aerosol instruments during exposure to infiltrated ambient air to which cigarette smoke, diesel exhaust, wood smoke and cooking fumes were added. The limit of detection (LOD) derived from statistical analysis of field data is 18 mu g m-3, at the 99percent confidence level. The monitor weighs less than 120 g and has a volume of roughly 250 cm3. Power consumption is approximately 100 milliwatts. During this study, the optical component of the device was not fully implemented and has been left for future efforts. Suggested improvements in the current prototype include use of integrated thermal correction, reconfiguration of the resonator for increased particle collection area, increased thermophoretic collection efficiency using an increased temperature gradient, and shielding the resonator electronics from deposition of ultrafine particles.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Solar wind heat flow

The ability of a theoretical solar wind model to predict the energy flux density due to heat conduction was investigated. In order to demonstrate this capability, the analysis used simultaneous data from the electron plasma experiment of Ogilvie and Lind, and the vector magnetic field data of Heppner and Sugiura on OGO-5. On the strength of two independent, different, and consistent experimental determinations of the conduction of heat flux by electrons at 149.6 gigameters(1 AU), it was determined that the models for the solar wind must be able to predict a value for the heat conduction in the range 0.007 to 0.008 in order to be in agreement with the observations.

Scudder, J.↗

Applications of the Coastal Zone Color Scanner in oceanography

Research activity has continued to be focused on the applications of the Coastal Zone Color Scanner (CZCS) imagery in oceanography. A number of regional studies were completed including investigations of temporal and spatial variability of phytoplankton populations in the South Atlantic Bight, Northwest Spain, Weddell Sea, Bering Sea, Caribbean Sea and in tropical Atlantic Ocean. In addition to the regional studies, much work was dedicated to developing ancillary global scale meteorological and hydrographic data sets to complement the global CZCS processing products. To accomplish this, SEAPAK's image analysis capability was complemented with an interface to GEMPAK (Severe Storm Branch's meteorological analysis software package) for the analysis and graphical display of gridded data fields. Plans are being made to develop a similar interface to SEAPAK for hydrographic data using EPIC (a hydrographic data analysis package developed by NOAA/PMEL).

Mcclain, C. R.↗

Plasma pressure in the environment of Jupiter, inferred from Voyager 1 magnetometer observations

A model combining the internal magnetic field with a self-consistent model of the Jovian magnetodisc was fitted to the Voyager 1 Jovian magnetic field data by means of a generalized inverse technique. The model parameters included the internal field spherical harmonic coefficients as well as with parameters describing the plasma distribution in the magnetosphere. Assuming that the pressure in the middle and outer magnetosphere is related to the unit flux tube volume V through PV exp gamma = const, the model fit yielded a value of 0.88 for gamma. If the hot (30 keV) plasma is transported adiabatically inward under the interchange instability triggered by centrifugal force of the heavy torus ions, losses are not sufficient to account for such a low value of gamma beyond L = 10. Closer to the planet, as the outer edge of the Io plasma torus is approached, PV exp gamma is found to decrease inward, as expected from the particle measurements, which identified an inner boundary of the particle fluxes in that region. With the present stage of the development of magnetodisc models, secular variations of the internal field still remain difficult to estimate.

Caudal, G.↗

Radial and latitudinal variations of the magnetic field strength in the outer heliosphere

The radial, latitudinal, and temporal variations of the magnetic field in the outer heliosphere are analyzed on the basis of observations from Voyagers 1 and 2 and Pioneers 10 and 11. The radial variation of the magnetic field strength measured during 1973-1989 from 1 to 19 AU is compared with that predicted by Parker's (1963) spiral field model. Additional Voyager 2 magnetic field data from 1986 through most of 1989 are discussed. Latitudinal variations in the magnetic field strength are examined on Voyager 1 and 2 observations from 1981 to 1989. It is concluded that both the Voyager and the Pioneer observations are consistent with Parker's model for the variation of the strength of the magnetic field as a function of distance from the sun in the region from 1 to 19 AU. The topology of the spiral interplanetary magnetic field, as well as a program for analyzing more general magnetic fields and velocity fields in the heliosphere are also discussed.

Burlaga, L. F.↗

Geotail observations of spiky electric fields and low-frequency waves in the plasma sheet and plasma sheet boundary

Electric field data from the Geotail spacecraft provide an opportunity to extend the observations of spiky fields made by International Sun Earth Explorer-1 (ISEE-1) to a region of the magnetosphere where quasistatic electric field measurements have not previously been msde, to examine their possible importance in the dynamics of the middle and distant tail, and to test some hypotheses about their formation. In this paper, examples of large fields in the plasma sheet and its boundary at radial distances up to approximately 90 R(sub E) are presented. It is shown that three different types of large electric fields can occur: (1) spiky fields; (2) 'DC' fields; and (3) waves at frequencies comparable to the lower hybrid frequency. There is usually a gradation between (1) and (3), and often large electric field spikes are embedded in regions of lower amplitude waves. The waves tend to occur in short (few to 10's of seconds) packets whose start and stop times are not always correlated with changes in the magnetic field and/or density (as indicated by the spacecraft potential). The peak frequency is often less than but comparable to the lower hybrid frequency in agreement with theories of lower hybrid drift waves in the magnetotail. The largest spikes are not always associated with the largest changes in the spacecraft potential and/or magnetic field. It is suggested that the spiky fields may represent the nonlinear development of the waves.

Cattell, C.↗

Magnetic Properties of Lunar Geologic Terranes: New Statistical Results

We use global magnetic field data and digitized geologic maps to determine the magnetic properties of lunar terranes. Average fields vary by a factor of 100 from demagnetized impact basins and craters to strongly magnetized antipodal regions. Additional information is contained in the original extended abstract.

Halekas, J. S.↗

A Bayesian Approach to Sensor Characterization

The physical model of a generic electro-optic sensor is derived and incorporated into a Bayesian framework for the estimation of key instrument parameters from calibration data. The sensor characterization thus achieved enables optimal subsequent removal of instrument effects from field data, leading to the highest possible accuracy in the retrieved physical quantities.

Timucin, Dogan A.↗

RANS Analyses of Turbofan Nozzles with Internal Wedge Deflectors for Noise Reduction

Computational fluid dynamics (CFD) was used to evaluate the flow field and thrust performance of a promising concept for reducing the noise at take-off of dual-stream turbofan nozzles. The concept, offset stream technology, reduces the jet noise observed on the ground by diverting (offsetting) a portion of the fan flow below the core flow, thickening and lengthening this layer between the high-velocity core flow and the ground observers. In this study a wedge placed in the internal fan stream is used as the diverter. Wind, a Reynolds averaged Navier-Stokes (RANS) code, was used to analyze the flow field of the exhaust plume and to calculate nozzle performance. Results showed that the wedge diverts all of the fan flow to the lower side of the nozzle, and the turbulent kinetic energy on the observer side of the nozzle is reduced. This reduction in turbulent kinetic energy should correspond to a reduction in noise. However, because all of the fan flow is diverted, the upper portion of the core flow is exposed to the freestream, and the turbulent kinetic energy on the upper side of the nozzle is increased, creating an unintended noise source. The blockage due to the wedge reduces the fan mass flow proportional to its blockage, and the overall thrust is consequently reduced. The CFD predictions are in very good agreement with experimental flow field data, demonstrating that RANS CFD can accurately predict the velocity and turbulent kinetic energy fields. While this initial design of a large scale wedge nozzle did not meet noise reduction or thrust goals, this study identified areas for improvement and demonstrated that RANS CFD can be used to improve the concept.

DeBonis, James R.↗

DECONSTRUCTING ACTIVE REGION AR10961 USING STEREO, HINODE, TRACE, AND SOHO

Active region 10961 was observed over a five-day period (2007 July 2-6) by instrumentation on-board STEREO, Hinode, TRACE, and SOHO. As it progressed from Sun's center to the solar limb, a comprehensive analysis of the extreme ultraviolet, X-ray, and magnetic field data reveals clearly observable changes in the global nature of the region. Temperature analyses undertaken using STEREO Extreme Ultraviolet Imager double filter ratios and X-ray imaging telescope single and combined filter ratios demonstrate an overall cooling of the region from between 1.6-3.0 MK to 1.0-2.0 MK over the five days. Similarly, Hinode Extreme Ultraviolet Imaging Spectrograph density measurements show a corresponding increase in density of 27%. Moss, cool (1 MK) outer loop areas, and hotter core loop regions were examined and compared with potential magnetic field extrapolations from SOHO Michelson Doppler Imager magnetogram data. In particular, it was found that the potential field model was able to predict the structure of the hotter X-ray loops and that the larger cool loops seen in 171 A images appeared to follow the separatrix surfaces. The reasons behind the high-density moss regions only observed on one side of the active region are examined further.

79 ASTRONOMY AND ASTROPHYSICS↗

A search for the solar roots of the most disturbed interplanetary field intervals of solar cycle 21

During the course of the Pioneer Venus Orbiter mission, fairly continuous interplanetary plasma and magnetic field data were obtained which span the interval from prior to the last solar maximum to the current solar minimum recovery. Within this nearly complete solar cycle interval, several periods of exceptional disturbance of the interplanetary field stand out. The available solar data have been examined to determine what features, if any, distinguish these periods. Neither flare nor coronal mass ejection reports show particularly unusual behavior. However, these periods appear to occur in conjunction with marked changes in the interplanetary sector structure. This suggests that heliospheric current sheet reconfiguration is an indicator of the level of interplanetary disturbance distinct from the more traditional solar activity data.

Luhmann, J. G.↗

Experimental Evaluation of Multi-spacecraft Data Analysis Techniques in a Laboratory Plasma

The Magnetic Reconnection Experiment (MRX)[1] has been utilized to assess the effectiveness of minimum variance analysis on the magnetic field (MVAB) and boundary-crossing time analysis (BCTA). The neutral sheet is swept, or jogged, in a controlled manner with respect to the stationary probes by pulsed internal coil currents. Magnetic field data from measurement points resembling data from multi-spacecraft flying though a reconnecting current sheet is used to check both techniques to deduce a proper normal vector. We examine discharges with the two-dimensional (2-D) X-line structure as well as cases in which a flux rope forms within the layer. All discharges are in a two-fluid regime in which electrons are magnetized but not ions. Boundary-crossing time analysis with four sample measurement points forming a tetrahedron generates a reasonable unit normal vector and relative velocity along the normal vector for all of the tested cases. On the other hand, MVAB sometimes fails to predict a proper normal direction. This is because the X-line magnetic geometry is fundamentally 2-D or 3-D. However, the direction along the reconnecting field determined by MVAB does not deviate much from the real magnetic geometry documented by 2-D magnetic probe arrays and one additional probe at a different toroidal location. Based on these observations, we suggest a procedure for determining a local coordinate system for data from the Magnetospheric Multi-Scale (MMS) mission when spacecraft passes through a reconnecting current sheet. The distance between measurement points on the order of the ion skin depth ($c/\omega_{pi}$) is pertinent to determination of the magnetic geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uniform and Half‐Space Models for Magnetic Dipole Sources in a Conducting Medium: I. Theory and Results

Underground nuclear events result in electromagnetic signals near the event location. Of particular interest, because its signal can be potentially enhanced by the use of large cavities to decouple the seismic signal, is the generation of an EMP signal within the nuclear detonation (NUDET) cavity, from the formation of a bubble in the local magnetic field. This mechanism is equivalent to a buried time varying magnetic dipole. In order to model such signals Los Alamos National Laboratory is developing a detailed model for the propagation of RF signals from buried sources to nearby sensors, with a focus on sources that are magnetic dipole in character. In order to validate this code, models for simple geometries involving magnetic dipole sources have been implemented. These models represent the fields from vertical and horizontal dipoles in cylindrical coordinates, either in a uniform linear isotropic electrical medium, or in a space consisting of two half spaces interfacing at the plane z=0, with the upper half space having the electrical properties of free space and the lower half space having arbitrary linear conductivity and electrical permittivity. While primarily intended for the validation of the more detailed model, the shorter turnaround time of these models facilitates the study of the general properties of geomagnetic bubble signals. This report summarizes the theory and example results for those models. The use of the model for model validation is illustrated with the near and surface fields for dipoles with Gaussian time dependence. Also examined are the surface fields expected for the geomagnetic bubble predicted by the numerical model of Kovalenko et al for a 1 kt nuclear detonation. The model of Kovalenko et al was also rescaled to allow comparison with Zablocki’s electric field observations for Bilby, Event III, and Event V. While the rescaled Kovalenko et al model had approximately the right time scale for the duration of the main peak, and a slower fall than rise also in qualitative agreement with the observations, the predicted signals had very different polarizations, were too low by more than an order of magnitude, and had less temporal structure. A simple comparison with the vertical B field data of Sweeney, where the detailed event geometries and yields are classified, but the sensor range and bounds on the yields are given, suggest that the scaled Kovalenko et al model gives too small a peak field compared to observations for that data set as well, except perhaps for the Borate event. A companion report will give a detailed discussion of the implementation and code.

58 GEOSCIENCES↗

Processing of DMSP magnetic data and its use in geomagnetic field modeling

The DMSP F-7 satellite is an operational Air Force meteorological satellite which carried a magnetometer for geophysical measurements. The magnetometer was located within the body of the spacecraft in the presence of large spacecraft fields. In addition to stray magnetic fields, the data have inherent position and time inaccuracies. Algorithms were developed to identify and remove time varying magnetic field noise from the data. Techniques developed for Magsat were then modified and used to attempt determination of the spacecraft fields, of any rotation between the magnetometer axes and the spacecraft axes, and of any scale changes within the magnetometer itself. The corrected data were then used to attempt to model the geomagnetic field. This was done in combination with data from Magsat, from the standard magnetic observatories, from aeromagnetic and other survey data, and from DE-2 spacecraft field data. Future DMSP missions can be upgraded in terms of geomagnetic measurements by upgrading the time and position information furnished with the data, placing the magnetometer at the end of the boom, upgrading the attitude determination at the magnetometer, and increasing the accuracy of the magnetometer.

Ridgway, J. R.↗

The Aerospace Database data element dictionary with issues and recommendations from the meetings of July 24-25, August 13-14, and September 24-25, 1991

The present volume contains descriptions of the individual fields (data elements) which comprise the bibliographic records of the Aerospace Database. Indexes by field name and field mnemonic are provided. In addition, the issues and recommendations defined by the NASA STI Database Upgrade Working Group are included as annotations to the individual field descriptions and are listed at the end of the volume. The activities of the Working Group were initiated by the NASA STI Program Coordinating Council as part of an effort to improve overall database quality.

Source record↗

A comparison of geospatially modeled fire behavior and fire management utility of three data sources in the southeastern United States.

Landscape-scale fire behavior analyses are important to inform decisions on resource management projects that meet land management objectives and protect values from adverse consequences of fire. Deterministic and probabilistic geospatial fire behavior analyses are conducted with various modeling systems including FARSITE, FlamMap, FSPro, and Large Fire Simulation System. The fundamental fire intensity algorithms in these systems require surface fire behavior fuel models and canopy cover to model surface fire behavior. Canopy base height, stand height, and canopy bulk density are required in addition to surface fire behavior fuel models and canopy cover to model crown fire activity. Several surface fuel and canopy classification efforts have used various remote sensing and ecological relationships as core methods to develop the spatial layers. All of these methods depend upon consistent and temporally constant interpretations of crown attributes and their ecological conditions to estimate surface fuel conditions. This study evaluates modeled fire behavior for an 80,000 ha tract of land in the Atlantic Coastal Plain of the southeastern US using three different data sources. The Fuel Characteristic Classification System (FCCS) was used to build fuelbeds from intensive field sampling of 629 plots. Custom fire behavior fuel models were derived from these fuelbeds. LANDFIRE developed surface fire behavior fuel models and canopy attributes for the US using satellite imagery informed by field data. The Southern Wildfire Risk Assessment (SWRA) developed surface fire behavior fuel models and canopy cover for the southeastern US using satellite imagery. Differences in modeled fire behavior, data development, and data utility are summarized to assist in determining which data source may be most applicable for various land management activities and required analyses. Characterizing fire behavior under different fuel relationships provides insights for natural ecological processes, management strategies for fire mitigation, and positive and negative features of different modeling systems. A comparison of flame length, rate of spread, crown fire activity, and burn probabilities modeled with FlamMap shows some similar patterns across the landscape from all three data sources, but there are potentially important differences. All data sources showed an expected range of fire behavior. Average flame lengths ranged between 1 and 1.4 m. Rate of spread varied the greatest with a range of 2.4-5.7 m min{sup -1}. Passive crown fire was predicted for 5% of the study area using FCCS and LANDFIRE while passive crown fire was not predicted using SWRA data. No active crown fire was predicted regardless of the data source. Burn probability patterns across the landscape were similar but probability was highest using SWRA and lowest using FCCS.

60 APPLIED LIFE SCIENCES↗

Surrogate models for development of unconventional shale reservoirs by an integrated numerical approach of hydraulic fracturing, flow and geomechanics, and machine learning

We develop well-completion surrogate models by taking an integrated workflow of hydraulic fracturing, flow, geomechanics, and machine learning simulation. There are three steps in the proposed workflow. First, history-matching processes are conducted with the field data including pumping and production data for characterization. Second, full-physics simulation is performed with various parameters of the field development (e.g., cluster spacing, clusters per stage, pumping rates and times, amount of proppant, and well spacing) to generate multiple simulation results by changing the parameters of the completion design with well-known hydraulic fracturing, reservoir, geomechanics simulators to calculate fracture geometry, reservoir depressurization, induced stress changes. The workflow is demonstrated over a field in the Southern Midland Basin. Here, we take two completion scenarios: a single well case followed by a multi-well case. Finally, a Long Short-Term Memory (LSTM) machine learning algorithm is employed to create surrogate models that can replicate the full-physics simulation results. Furthermore, results show that the trained models applied in the single well and multi-well cases for a particular geological system can provide good accuracy close to those provided by full-physics simulations. Specifically, the site-specific surrogate models can predict fracture parameters (length, height, and surface area) and cumulative production accurately with computational efficiency, suggesting our proposed workflow can be used as a pragmatic tool for expediting the well completion optimization process.

Geomechanics↗