Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fixed Base”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Equation of State of TiN at High Pressures and Temperatures: A Possible Host for Nitrogen in Planetary Mantles

Nitrogen, the most abundant element in Earth's atmosphere, is also a primary component of solid nitride minerals found in meteorites and on Earth's surface. If they remain stable to high pressures and temperatures, these nitrides may also be important reservoirs of nitrogen in planetary interiors. We used synchrotron X-ray diffraction to measure the thermal equation of state and phase stability of titanium nitride (TiN) in a laser-heated diamond anvil cell at pressures up to ~70 GPa and temperatures up to ~2500 K. TiN maintains the cubic B1 (NaCl-type) crystal structure over the entire pressure and temperature range explored. It has K 0 = 274(4) GPa, K 0 ' = 3.9(2), and γ 0 = 1.39(4) for a fixed V 0 = 76.516(30) Å 3 (based on experimental measurements), q = 1, and θ 0 = 579 K. Additionally, we collected Raman spectra of TiN up to ~60 GPa, where we find that the transverse acoustic (TA), longitudinal acoustic (LA), and transverse optical (TO) phonon modes exhibit mode Grüneisen parameters of 1.66(17), 0.54(15), and 0.93(4), respectively. Based on our equation of state, TiN has a density of ~5.6–6.4 g/cm 3 at Earth's lower mantle conditions, significantly more dense than both the mantle of the Earth and the estimated densities of the mantles of other terrestrial planets, but less dense than planetary cores. Furthermore, we find that TiN remains stable against physical decomposition at the pressures and temperatures found within Earth's mantle, making it a plausible reservoir for deep planetary nitrogen if chemical conditions allow its formation.

58 GEOSCIENCES↗
DOE OSTI2013

Determination of lattice parameters, strain state and composition in semipolar III-nitrides using high resolution X-ray diffraction

In group-III-nitride heterostructures with semipolar or nonpolar crystal orientation, anisotropic lattice and thermal mismatch with the buffer or substrate lead to a complex distortion of the unit cells, e.g., by shearing of the lattice. This makes an accurate determination of lattice parameters, composition, and strain state under assumption of the hexagonal symmetry impossible. In this work, we present a procedure to accurately determine the lattice constants, strain state, and composition of semipolar heterostructures using high resolution X-ray diffraction. An analysis of the unit cell distortion shows that four independent lattice parameters are sufficient to describe this distortion. Assuming only small deviations from an ideal hexagonal structure, a linear expression for the interplanar distances d{sub hkl} is derived. It is used to determine the lattice parameters from high resolution X-ray diffraction 2ϑ-ω-scans of multiple on- and off-axis reflections via a weighted least-square fit. The strain and composition of ternary alloys are then evaluated by transforming the elastic parameters (using Hooke's law) from the natural crystal-fixed coordinate system to a layer-based system, given by the in-plane directions and the growth direction. We illustrate our procedure taking an example of (112{sup ¯}2) Al{sub κ}Ga{sub 1−κ}N epilayers with Al-contents over the entire composition range. We separately identify the in-plane and out-of-plane strains and discuss origins for the observed anisotropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Systematic investigation on topological properties of layered GaS and GaSe under strain

The topological properties of layered β-GaS and ε-GaSe under strain are systematically investigated by ab initio calculations with the electronic exchange-correlation interactions treated beyond the generalized gradient approximation (GGA). Based on the GW method and the Tran-Blaha modified Becke-Johnson potential approach, we find that while ε-GaSe can be strain-engineered to become a topological insulator, β-GaS remains a trivial one even under strong strain, which is different from the prediction based on GGA. The reliability of the fixed volume assumption rooted in nearly all the previous calculations is discussed. By comparing to strain calculations with optimized inter-layer distance, we find that the fixed volume assumption is qualitatively valid for β-GaS and ε-GaSe, but there are quantitative differences between the results from the fixed volume treatment and those from more realistic treatments. This work indicates that it is risky to use theoretical approaches like GGA that suffer from the band gap problem to address physical properties, including, in particular, the topological nature of band structures, for which the band gap plays a crucial role. In the latter case, careful calibration against more reliable methods like the GW approach is strongly recommended.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Phenomenology and cosmology of no-scale attractor models of inflation

We have recently proposed attractor models for modulus fixing, inflation, supersymmetry breaking and dark energy based on no-scale supergravity. In this paper we develop phenomenological and cosmological aspects of these no-scale attractor models that underpin their physical applications. We consider models in which inflation is driven by a modulus field (T-type) with supersymmetry broken by a Polonyi field, or a matter field (φ-type) with supersymmetry broken by the modulus field. We derive the possible patterns of soft supersymmetry-breaking terms, which depend in T-type models whether the Polonyi and/or matter fields are twisted or not, and in φ-type models on whether the inflaton and/or other matter fields are twisted or not. In φ-type models, we are able to directly relate the scale of supersymmetry breaking to the inflaton mass. We also discuss cosmological constraints from entropy considerations and the density of dark matter on the mechanism for stabilizing the modulus field via higher-order terms in the no-scale K¨ahler potential.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Nonunique fraction of Fock exchange for defects in two-dimensional materials

By investigating the vacancy and substitutional defects in monolayer WS 2 with hybrid functionals, we find that there is no unique amount of Fock exchange that concurrently satisfies the generalized Koopmans' condition and reproduces the band-gap and band-edge positions. Fixing the mixing parameter of Fock exchange based on the band gap can lead to qualitatively incorrect defect physics in two-dimensional materials. Instead, excellent agreement is achieved with both experiment and many-body perturbation theory within the GW approximation once the mixing parameters are tuned individually for the defect species and the band edges. Here, we show the departure from a unique optimized mixing parameter is inherent to two-dimensional systems as the band edges experience a reduced screening while the localized defects are subject to bulklike screening.

2-dimensional systems↗
DOE OSTI2024

Regulating loops in de Sitter spacetime

Perturbative quantum field theory (QFT) calculations in de Sitter space are riddled with contributions that diverge over time. These contributions often arise from loop integrals, which are notoriously hard to compute in de Sitter. We discuss an approach to evaluate loop integrals that contribute to equal-time correlators of a scalar field theory in a fixed de Sitter background. Our method is based on the Mellin-Barnes representation of correlation functions, which allows us to regulate loop divergences by adjusting the masses of the fields, or by gently deforming the underlying de Sitter spacetime. The resulting expressions have a similar structure as a standard answer from dimensional regularization in flat space QFT. These features of the regulator are illustrated with two examples, worked out in detail. Along the way, we illuminate the physical origin of these divergences and their interpretation with the machinery of the dynamical renormalization group. Our approach regulates the IR divergences of massless and massive particles in the same way. For massless scalars, the loop corrections can be incorporated as systematic improvements to the stochastic inflation framework, allowing for a more precise description of the IR dynamics of such fields in de Sitter. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2019

Global Phase and Magnitude Synchronization of Coupled Oscillators With Application to the Control of Grid-Forming Power Inverters

In this paper, we explore a new approach to synchronization of coupled oscillators. In contrast to the celebrated Kuramoto model, we do not work in polar coordinates and do not consider oscillations of fixed magnitude. We propose a synchronizing feedback based on relative state information and local measurements that induces consensus-like dynamics. We show that, under a mild stability condition, the combination of the synchronizing feedback with a decentralized magnitude control law renders the oscillators' almost globally asymptotically stable with respect to set points for the phase shift, frequency, and magnitude. We apply these result to rigorously solve an open problem in control of inverter-based ac power systems. In this context, the proposed control strategy can be implemented using purely local information, induces a grid-forming behavior, and ensures that a network of ac power inverters is almost globally asymptotically stable with respect to a prespecified solution of the ac power-flow equations. Moreover, we show that the controller exhibits a droop-like behavior around the standard operating point, thus, making it backward compatible with the existing power system operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2011

Experimental comparison of seven commercial dosimetry diodes for measurement of stereotactic radiosurgery cone factors

Purpose: The purpose of this work is to assess the variation in performance of various commercially available dosimetry diodes for quantitative small field dosimetry, specifically by intercomparing measurements of SRS cone factors. Methods: Measurements were made in 6 MV photon beams with fixed SRS cones for two accelerator-based SRS systems: a Varian Clinac iX (Varian/Zmed cones) at 600 MU/min and a CyberKnife model G4 at 800 MU/min. Measurements were made at 1.5 cm depth in water using the IBA Dosimetry ''blue phantom'' 3D scanning system, controlled by omnipro-accept software. Source-to-detector distance was 100 cm for the Clinac, 80 cm for the CyberKnife. Two normalization methods were used for the Clinac, one directly referenced to diode measurements in a 10 cm x 10 cm square field and the other indirectly by ''daisy-chaining'' diode measurements to ion chamber measurement in the 10 cm x 10 cm reference field through an intermediate 4 cm x 4 cm square field. CyberKnife factors were referenced directly to measurements in the 60 mm reference field. Seven commercial diodes were evaluated: PTW TN60008, TN60012, TN60016, TN60017; IBA Dosimetry SFD; Sun Nuclear EDGE; Exradin SD1 (first generation prototype). Results: With the exception of the SFD, all the evaluated devices yielded surprisingly consistent results. Standard deviations of Clinac factors for four diodes (SD1, EDGE, TN60008, and TN60012) ranged from approximately 0.50% at 30 mm to 2.0% at 5 mm cones size when referenced directly to the 10 cm x 10 cm measurement. The daisy-chaining strategy reduced the standard deviation to approximately 0.30% at 30 mm and 1.9% at 5 mm. Standard deviations for the same four diodes in the CyberKnife beam ranged up to approximately 1.0% at 5 mm. Conclusions: The inter-detector variation is small and appears to be systematic with detector packaging, more inherent filtration producing flatter curves for both the relatively hard Clinac beam and the softer CyberKnife beam. The daisy-chain strategy appears to be of limited value for most of the diodes, but does bring the SFD results into significantly better agreement with the others.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Poster — Thur Eve — 06: Dose assessment of cone beam CT imaging protocols as part of SPECT/CT examinations

Purpose: To assess radiation dose from the cone beam CT (CBCT) component of SPECT/CT studies and to compare with other CT examinations performed in our institution. Methods: We used an anthropomorphic chest phantom and the 6 cc ion chamber to measure entrance breast dose for several CBCT and diagnostic CT acquisition protocols. The CBCT effective dose was calculated with ImPACT software; the CT effective dose was evaluated from the DLP value and conversion factor, dependent on the anatomic region. The RADAR medical procedure radiation dose calculator was used to assess the nuclear medicine component of exam dose. Results: The entrance dose to the breast measured with the anthropomorphic phantom was 0.48 mGy and 9.41 mGy for cardiac and chest CBCT scans; and 4.59 mGy for diagnostic thoracic CT. The effective doses were 0.2 mSv, 3.2 mSv and 2.8 mSv respectively. For a small patient represented by the anthropomorphic phantom, the dose from the diagnostic CT was lower than from the CBCT scan, as a result of the exposure reduction options available on modern CT scanners. The CBCT protocols used the same fixed scanning techniques. The diagnostic CT dose based on the patient data was 35% higher than the phantom dose. For most SPECT/CT studies the dose from the CBCT component was comparable with the dose from the radiopharmaceutical. Conclusions: The patient radiation dose from the cone beam CT scan can be higher than that from a diagnostic CT and should be taken into consideration in evaluating total SPECT/CT patient dose.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Chapter 7.1: Microalgae

Microalgae is a unique biomass resource that does not need to compete for land and water with other biomass feedstocks because it can be cultivated on low-quality unencumbered land using noncompetitive water types including saline and wastewater. It is included as a complementary resource alongside other biomass feedstocks reported in this study, albeit at higher biomass production costs reflective of more capital-intensive farming operations than typical for terrestrial biomass. Higher biomass costs can be offset by the potential to produce value-added coproducts unique to compositional constituents of microalgae. Relative to BT16, this chapter reflects the latest analysis from the 2022 Algae Harmonization Update, which uses the latest parameterized and high-performing saline algal strain, second-generation carbon capture of point-source waste CO2 and high-pressure pipeline transport resolved to specific point-source types, saline water sourcing up to 40,000 mg/L total dissolved solids for source and makeup water salinity, blowdown water treatment and recycle, and brine disposal handling. National-scale algal biomass availability potential was calculated at 152 million tons/yr ash-free dry weight (AFDW) (191 million tons/yr dry weight) at an average biomass productivity of 26.2 g/m2 -day AFDW (about 50 tons/acre/yr dry weight).1 The algal biomass was cultivated on 3.9 million acres of multi-criteria screened and potentially available land for CONUS and fixed 268 million tons of waste CO2 based on biomass uptake. The algae biomass can be produced at an average MBSP of $674/ton AFDW ($536/ton dry weight) in 2020 dollars,2 corresponding to a total energy potential of 3.3 quads/yr at an average MBSP of $31.2/MMBtu (higher-heating-value [HHV] basis).

algae↗
NASA NTRS1977

Aerodynamic characteristics of supersonic fighter airplane configurations based on Soviet design concepts

The aerodynamic, stability, and control characteristics of several supersonic fighter airplane concepts are examined. The configurations, which are based on Soviet design concepts, include fixed-wing aircraft having delta wings, swept wings, and trapezoidal wings, and a variable wing-sweep aircraft. Each concept employs aft tail controls. The concepts vary from lightweight, single-engine, air superiority, point interceptor, or ground attack types to larger twin-engine interceptor and reconnaissance designs. Analytical and experimental results indicate that careful application of the transonic or supersonic area rule can provide nearly optimum shaping for minimum drag for a specified Mach number requirement. In addition, through the proper location of components and the exploitation of interference flow fields, the concepts provide linear pitching moment characteristics, high control effectiveness, and reasonably small variations in aerodynamic center location with a resulting high potential for maneuvering capability.

Spearman, M. L.↗
NASA NTRS1983

Optimal short range trajectories for helicopters

An optimal flight path algorithm using a simplified altitude state model and an apriori climb-cruise-descent flight profile has been developed and applied to determine minimum fuel and minimum cost trajectories for a helicopter flying a fixed range trajectory. The performance model is based on standard flight manual data and is such that on-line trajectory optimization is feasible with a relatively small computer. The results show that the optimal flight path and optimal cruise altitude can represent a 10 percent fuel saving on a minimum fuel trajectory. The optimal trajectories show considerable variability due to helicopter weight, ambient winds and the relative cost trade-off between time and fuel. In general, 'reasonable' variations from the optimal velocities and cruise altitudes do not significantly degrade the optimal cost.

Slater, G. L.↗
NASA NTRS1984

Severe storm electricity

Successful ground truth support of U-2 overflights was been accomplished. Data have been reduced for 4 June 1984 and some of the results have been integrated into some of MSFC's efforts. Staccato lightning (multiply branched, single stroke flash with no continuing current) is prevalent within the rainfree region around the main storm updraft and this is believed to be important, i.e., staccato flashes might be an important indicator of severe storm electrification. Results from data analysis from two stations appear to indicate that charge center heights can be estimated from a combination of intercept data with data from the fixed laboratory at NSSL. An excellent data base has been provided for determining the sight errors and efficiency of NSSL's LLP system. Cloud structures, observable in a low radar reflectivity region and on a scale smaller than is currently resolved by radar, which appear to be related to electrical activity are studied.

Arnold, R. T.↗
NASA NTRS1985

AUTOSIM: An automated repetitive software testing tool

AUTOSIM is a software tool which automates the repetitive run testing of software. This tool executes programming tasks previously performed by a programmer with one year of programming experience. Use of the AUTOSIM tool requires a knowledge base containing information about known faults, code fixes, and the fault diagnosis-correction process. AUTOSIM can be considered as an expert system which replaces a low level of programming expertise. Reference information about the design and implementation of the AUTOSIM software test tool provides flowcharts to assist in maintaining the software code and a description of how to use the tool.

Dunham, J. R.↗
NASA NTRS1990

Molecular arrangements and conformations of liquid n-tridecane chains confined between two hard walls

Monte Carlo simulations based on united CH2 atoms linked with fixed bond lengths and angles, and continuously varying torsional angles subject to appropriate interaction energies, were used to study liquid n-tridecane chains confined between two parallel hard walls with 5 mm separation. The molecules located in the central region are noted to be in very close agreement with ideal unperturbed chains. Nearly all the chain units in the first segmental layer adjacent to the walls belong to two-dimensional chains, and exhibit considerable orientational correlations between neighboring segments of different chains.

Vacatello, Michele↗
NASA NTRS1991

Halley's spin state determined

Since VEGA and GIOTTO flybys of comet Halley, there was a rising controversy about the nature of the spin state of its nucleus. The problem was resolved by M. J. S. Belton et al., who found a spin state that simultaneously satisfies the VEGA and GIOTTO imaging data and a wide range of ground-based data. The total spin is not fixed in the nucleus but is inclined to the total angular momentum vector at an average angle of 21.4 deg and precesses around it with an average period of 3.69 days.

Belton, Michael J. S.↗