Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterogeneous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Manipulating Retained Austenite Fraction and Stability With Controlled Chemical Heterogeneities in Q&P Steels

Advanced high-strength steels go through complex heat treatment processes with the goal of retaining austenite to enhance the mechanical properties. Martensite start temperature predictions are generally based on bulk composition when designing heat treatments, so compositional heterogeneities are not considered. Here, the effects of compositional heterogeneities on retained austenite fractions in a quenching and partitioning steel are investigated. In conclusion, the results show that Mn banding from solidification can be used to change retained austenite fractions.

36 MATERIALS SCIENCE↗

Viscosity of Heterogeneous Silicate Melts: A Non-Newtonian Model

The recently published viscosity data of heterogeneous silicate melts with well-documented structure and experimental conditions are critically re-analyzed and tabulated. By using these data, a non-Newtonian viscosity model incorporating solid fraction, solid shape, and shear rate is proposed on the basis of the power-law equation. This model allows calculating the viscosity of the heterogeneous silicate melts with solid fraction up to 34 vol pct. The error between the calculated and measured data is evaluated to be 32 pct, which is acceptable considering the large error in viscosity measurement of the completely liquid silicate melt.

36 MATERIALS SCIENCE↗

Viscosity of Heterogeneous Silicate Melts: A Review

The viscosity of solid phase containing heterogeneous silicate melts is discussed in this review. The crucial parameters characterizing silicate melt structure are first presented, i.e., volume fraction of solid particles, particle shape and size. The measurement and calculation methods of these parameters are summarized and the influence of the parameters on viscosity is discussed. Next, a theoretical description of rheological behavior in heterogeneous silicate melts is given, focusing on non-Newtonian characteristics, e.g., shear-dependence, time-dependence, and yield stress. The viscosity models which were proposed in the last half century are reviewed and critically assessed. This paper concludes with opportunities and suggestions for future work.

36 MATERIALS SCIENCE↗

Estimating Sample Heterogeneity and Expected Scatter Due to Cracking in Packed Powder Samples Using a Two-Phase Model

High-precision Hugoniot measurements of heterogeneous materials are a key tool in creating accurate equations of state, but such measurements are prone to larger uncertainties than their homogeneous counterparts. To efficiently reduce these uncertainties one must estimate the relative contributions of different error sources. Sample cracking is one likely source. Here we estimate its contribution through modeling, using computed tomography scans of powdered single crystal quartz samples to estimate typical packing variation within and between samples. Samples were prepared using the same materials and methods. Furthermore, cracks were prominent in the samples. We describe a simple model to estimate shock transit time variation for a single shot due to cracking, and estimate that up to 3% variation can be attributed to these structures. This suggests that decreasing variation requires addressing such packing heterogeneities during target fabrication rather than experimental diagnostics.

36 MATERIALS SCIENCE↗

Propagation of a Stress Pulse in a Heterogeneous Elastic Bar

The propagation of a wave pulse due to low-speed impact on a one-dimensional, heterogeneous bar is studied here. Due to the dispersive character of the medium, the pulse attenuates as it propagates. This attenuation is studied over propagation distances that are much longer than the size of the microstructure. A homogenized peridynamic material model can be calibrated to reproduce the attenuation and spreading of the wave. The calibration consists of matching the dispersion curve for the heterogeneous material near the limit of long wavelengths. It is demonstrated that the peridynamic method reproduces the attenuation of wave pulses predicted by an exact microstructural model over large propagation distances.

36 MATERIALS SCIENCE↗

Sensitivity Analysis for Solutions to Heterogeneous Nonlocal Systems. Theoretical and Numerical Studies

The paper presents a collection of results on continuous dependence for solutions to nonlocal problems under perturbations of data and system parameters. The integral operators appearing in the systems capture interactions via heterogeneous kernels that exhibit different types of weak singularities, space dependence, even regions of zero-interaction. Here, the stability results showcase explicit bounds involving the measure of the domain and of the interaction collar size, nonlocal Poincaré constant, and other parameters. In the nonlinear setting, the bounds quantify in different L p norms the sensitivity of solutions under different nonlinearity profiles. The results are validated by numerical simulations showcasing discontinuous solutions, varying horizons of interactions, and symmetric and heterogeneous kernels.

97 MATHEMATICS AND COMPUTING↗

Heterogeneities dominate mechanical performance of additively manufactured metal lattice struts

Architected structural metamaterials, also known as lattice, truss, or acoustic materials, provide opportunities to produce tailored effective properties that are not achievable in bulk monolithic materials. These topologies are typically designed under the assumption of uniform, isotropic base material properties taken from reference databases and without consideration for sub-optimal as-printed properties or off-nominal dimensional heterogeneities. However, manufacturing imperfections such as surface roughness are present throughout the lattices and their constituent struts create significant variability in mechanical properties and part performance. Here, this study utilized a customized tensile bar with a gauge section consisting of five parallel struts loaded in a stretch (tensile) orientation to examine the impact of manufacturing heterogeneities on quasi-static deformation of the struts, with a focus on ultimate tensile strength and ductility.

36 MATERIALS SCIENCE↗

An efficient, high-order probabilistic collocation method on sparse grids for three-dimensional flow and solute transport in randomly heterogeneous porous media

In this study, a probabilistic collocation method (PCM) on sparse grids was used to solve stochastic equations describing flow and transport in three-dimensional in saturated, randomly heterogeneous porous media. Karhunen-Lo\`{e}ve (KL) decomposition was used to represent the three-dimensional log hydraulic conductivity $Y=\ln K_s$. The hydraulic head $h$ and average pore-velocity $\bf v$ were obtained by solving the three-dimensional continuity equation coupled with Darcy's law with random hydraulic conductivity field. The concentration was computed by solving a three-dimensional stochastic advection-dispersion equation with stochastic average pore-velocity $\bf v$ computed from Darcy's law. PCM is an extension of the generalized polynomial chaos (gPC) that couples gPC with probabilistic collocation. By using the sparse grid points, PCM can handle a random process with large number of random dimensions, with relatively lower computational cost, compared to full tensor products. Monte Carlo (MC) simulations have also been conducted to verify accuracy of the PCM. By comparing the MC and PCM results for mean and standard deviation of concentration, it is evident that the PCM approach is computational more efficient than Monte Carlo simulations. Unlike the conventional moment-equation approach, there is no limitation on the amplitude of random perturbation in PCM. Furthermore, PCM on sparse grids can efficiently simulate solute transport in randomly heterogeneous porous media with large variances.

54 ENVIRONMENTAL SCIENCES↗

Heterogeneity or illusion? Track the carbon Kuznets curve of global residential building operations

Residential buildings, the “last mile” sector in the global decarbonization, have become the most significant uncertain factor hindering carbon neutrality with increasing household energy demand. To track the operational carbon in buildings, this study investigates the carbon Kuznets curve (CKC) and the corresponding decoupling status of residential building operations at four emission scales by using the data of 30 countries from 2000 to 2019. The results show that (1) the CKC model can fit more than half of the samples. Most curves have an inverted U-shape, with 76% of emission per household and 82% of total emissions. (2) In the presence of the CKC, over four-fifths of global residential buildings peak regardless of any emission scale. The analysis denotes that the carbon emissions of developed countries reach their peaks earlier. In the total emissions, the samples’ peaking proportion is 20% and 25% with income per capita < 20,000 United States dollars (USD) and 20,000–40,000 USD, respectively. (3) The Tapio decoupling analysis and the threshold regression effectively verify the robustness and the heterogeneity of CKCs, respectively. Strong decoupling effects of CKCs in most countries are demonstrated at the scales of emission per floor space and the total emissions, and the heterogeneity proves the classic inverted U-shaped relationship between economy and emissions doesn’t exist in all emitters. Overall, this study tracks the historical carbon emission trajectories of residential building operations at a global scale, providing reference for different economies to simulate the dynamic of building carbon emissions along with the economic booming.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Continuous conditional generative adversarial networks for data-driven solutions of poroelasticity with heterogeneous material properties

Machine learning-based data-driven modeling can allow computationally efficient time-dependent solutions of PDEs, such as those that describe subsurface multiphysical problems. In this work, our previous approach (Kadeethum et al., 2021d) of conditional generative adversarial networks (cGAN) developed for the solution of steady-state problems involving highly heterogeneous material properties is extended to time-dependent problems by adopting the concept of continuous cGAN (CcGAN). The CcGAN that can condition continuous variables is developed to incorporate the time domain through either element-wise addition or conditional batch normalization. Moreover, this framework can handle training data that contain different timestamps and then predict timestamps that do not exist in the training data. As a numerical example, the transient response of the coupled poroelastic process is studied in two different permeability fields: Zinn & Harvey transformation and a bimodal transformation. The proposed CcGAN uses heterogeneous permeability fields as input parameters while pressure and displacement fields over time are model output. Our results show that the model provides sufficient accuracy with computational speed-up. This robust framework will enable us to perform real-time reservoir management and robust uncertainty quantification in poroelastic problems.

97 MATHEMATICS AND COMPUTING↗

Determine the coordination of Al and Si of Fe-rich fly ash: The challenge in NMR and how we probe its heterogeneity using X-ray spectromicroscopy

Scanning transmission X-ray microscopy (STXM) coupled with ptychographic imaging at Al and Si K-edge is a new probe to the microscale chemistry of heterogenous materials. Here, the combined techniques are applied to study local coordination environment of Fe-rich fly ash (FA). Ptychographic imaging at Al K- and Si K-edge highlights the fine Al- and Si-rich morphological features, respectively, at 6 nm pixel resolution. STXM visualizes the inter- and intra-particle variations in the silicate polymerization degree and two types of Al coordination environment in FA. The Si K-edge of SiO4 connected with four-fold coordinated Al is higher than SiO4 sharing oxygen with six-fold coordinated Al. The result is consistent with bulk nuclear magnetic resonance spectroscopy measurement of the Fe-rich sample which, however, is sensitive to paramagnetic Fe and time-consuming. Here, we demonstrate that the combined method has great potential in the studies of chemically heterogenous aluminosilicates.

01 COAL, LIGNITE, AND PEAT↗

Wavelet-based surrogate time series for multiscale simulation of heterogeneous catalysis

We propose a wavelet-based scheme that encodes the essential dynamics of discrete microscale surface reactions in a form that can be coupled with continuum macroscale flow simulations with high computational efficiency. This makes it possible to simulate the dynamic behavior of reactor-scale heterogeneous catalysis without requiring detailed concurrent simulations at both the surface and continuum scales using different models. Our scheme is based on the application of wavelet-based surrogate time series that encodes the essential temporal and/or spatial fine-scale dynamics at the catalyst surface. The encoded dynamics are then used to generate statistically equivalent, randomized surrogate time series, which can be linked to the continuum scale simulation. As a result, we illustrate an application of this approach using two different kinetic Monte Carlo simulations with different characteristic behaviors typical for heterogeneous chemical reactions.

36 MATERIALS SCIENCE↗

Modelling Heterogeneity in Cellulose Properties Predicts the Slowdown Phenomenon during Enzymatic Hydrolysis

Fine control of the enzymatic hydrolysis of cellulose is challenging due to complex process dynamics. Conversion rate from cellulose to valuable monomeric products is often significantly slowed down after an initial rapid but short-lived phase. Underlying mechanisms for this process have yet to be fully understood and as a result poorly represented in existing models. Here, we propose a new modelling platform termed Multi-Layered Population Balance Model (ML-PBM), which enables various key aspects of cellulose enzymatic hydrolysis occurring over the entire breakdown process to be captured. As a core component for predicting the slowdown phenomenon, the ML-PBM properly accounts for heterogeneity in cellulose crystallinity and chain lengths across the structural layers of cellulose particles with different morphologies. Beyond a decent quantitative fit to highly nonlinear dynamic experimental data collected across different conditions, the ML-PBM reveals that the rate slowdown phenomenon is potentially due to heterogeneity in cellulose properties coupled with cellulose morphology. Equipped with the unification of various process fundamentals, the ML-PBM is a rational framework with the potential to facilitate sound cellulose engineering.

Ahamed, Firnaaz↗

Dynamical properties of AlN nanostructures and heterogeneous interfaces predicted using COMB potentials

A new empirical variable charge potential has been developed for AlN within the third-generation charge optimized many-body (COMB3) potential framework. We report the potential is able to reproduce the fundamental physical properties of AlN, including cohesive energy, elastic constants, defect formation energies, surface energies and phonon properties of AlN obtained from experiments and first-principles calculations. The thermodynamic properties of the Al(1 1 1)-AlN ( 1 0 1 ¯ 0 ) and Al 2 O 3 (0 0 0 1)-AlN ( 1 0 1 ¯ 0 ) interfaces and the tensile response of AlN nanowires and nanotubes are investigated in classical molecular dynamical (MD) simulations using this COMB3 potential. The results demonstrate that the potential is well suited to model heterogeneous materials in the Al–O–N system. Most importantly, the fully transferrable potential parameters can be seamlessly coupled with existing COMB3 parameters of other elements to enable MD simulations for an even wider range of heterogeneous materials systems.

36 MATERIALS SCIENCE↗

Exploratory analysis of high-resolution power interruption data reveals spatial and temporal heterogeneity in electric grid reliability

Modern grid monitoring equipment enables utilities to collect detailed records of power interruptions. Here, these data are aggregated to compute publicly reported metrics describing high-level characteristics of grid performance. The current work explores the depth of insights that can be gained from public data, and the implications of losing visibility into heterogeneity in grid performance through aggregation. We present an exploratory analysis examining three years of high-resolution power interruption data collected by archiving information posted in real-time on the public-facing website of a utility in the Western United States. We report on the size, frequency and duration of individual power interruptions, and on spatio-temporal variability in aggregate reliability metrics. Our results show that metrics of grid performance can vary spatially and temporally by orders of magnitude, revealing heterogeneity that is not evidenced in publicly reported metrics. We show that limited access to granular information presents a substantive barrier to conducting detailed policy analysis, and discuss how more widespread data access could help to answer questions that remain unanswered in the literature to date. Lastly, given open questions about whether grid performance is adequate to support societal needs, we recommend establishing pathways to make high-resolution power interruption data available to support policy research.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Physics-informed heterogeneous graph neural networks for DC blocker placement

The threat of geomagnetic disturbances (GMDs) to the reliable operation of the bulk energy system has spurred the development of effective strategies for mitigating their impacts. One such approach involves placing transformer neutral blocking devices, which interrupt the path of geomagnetically induced currents (GICs) to limit their impact. The high cost of these devices and the sparsity of transformers that experience high GICs during GMD events, however, calls for a sparse placement strategy that involves high computational cost. To address this challenge, we developed a physics-informed heterogeneous graph neural network (PIHGNN) for solving the graph-based dc-blocker placement problem. Our approach combines a heterogeneous graph neural network (HGNN) with a physics-informed neural network (PINN) to capture the diverse types of nodes and edges in ac/dc networks and incorporates the physical laws of the power grid. We train the PIHGNN model using a surrogate power flow model and validate it using case studies. Results demonstrate that PIHGNN can effectively and efficiently support the deployment of GIC dc-current blockers, ensuring the continued supply of electricity to meet societal demands. Furthermore, our approach has the potential to contribute to the development of more reliable and resilient power grids capable of withstanding the growing threat that GMDs pose.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Effects of overstory composition and prescribed fire on fuel loading across a heterogeneous managed landscape in the southeastern USA.

In the southeastern USA, land use history, forest management and natural geomorphic features have created heterogeneous fuel loads. This apparent temporal and spatial variation in fuel loads make it difficult to reliably assess potential fire behavior from remotely sensed canopy variables to determine risk and to prescribe treatments. We examined this variation by exploring the relationships between overstory forest vegetation attributes, recent fire history, and selected surface fuel components across an 80,000 ha contiguous landscape. Measurements of dead and live vegetation components of surface fuels were obtained from 624 permanent plots, or about 1 plot per 100 ha of forest cover. Within forest vegetation groups, we modeled the relationship between individual surface fuel components and overstory stand age, basal area, site quality and recent fire history, then stochastically predicted fuel loads across the landscape using the same linkage variables. The fraction of the plot variation, i.e., R2, explained by predictive models for individual fuel components ranged from 0.05 to 0.66 for dead fuels and 0.03 to 0.97 for live fuels in pine dominated vegetation groups. Stand age and basal area were generally more important than recent fire history for predicting fuel loads. Mapped fuel loads using these regressor variables showed a very heterogeneous landscape even at the scale of a few square kilometers. The mapped patterns corresponded to stand based forest management disturbances that are reflected in age, basal area, and fire history. Recent fire history was significant in explaining variation in litter and duff biomass. Stand basal area was positively and consistently related to dead fuel biomass in most groups and was present in many predictive equations. Patterns in live fuel biomass were related to recent fire history, but the patterns were not consistent among forest vegetation groups. Age and basal area were related to live fuels in a complex manner that is likely confounded with periodic disturbances that disrupt stand dynamics. This study complements earlier hazardous fuels research in the southeastern USA, and indicates that succession, disturbance, site quality and decomposition interact with forest management practices to create variable spatial and temporal conditions. The inclusion of additional land use, disturbance history, and soil-topographic variables coupled to improved sampling methods may increase precision and subsequent fuel mapping.

09 BIOMASS FUELS↗

The Mineralogic Transformation of Ferrihydrite Induced by Heterogeneous Reaction with Bioreduced Anthraquinone Disulfonate (AQDS) and the Role of Phosphate

Anthraquinone-2-6-disulfonate (AQDS) enhances electron donor utilization and mineral product crystallization in studies of Fe(III) oxide reductive mineralization by metal reducing bacteria (MRB) through heterogeneous redox reaction. In spite of the strong effect of AQDS in these systems, little information exits on its direct role in reductive mineralization. To provide such insights, bioreduced AQDS (AH2DS; dihydro-anthraquinone) was reacted with a 2-line, Si-substituted ferrihydrite under anoxic conditions at neutral pH in PIPES buffer. Phosphate (P) and bicarbonate (C); common adsorptive oxyanions and media/buffer components known to effect ferrihydrite mineralization; and Fe(II)aq (as a catalytic mineralization agent) were used in comparative experiments. Heterogeneous AH2DS oxidation coupled with Fe(III) reduction occurred within 0.13-1 day, with mineralogic transformation occurring thereafter. The product suite included lepidocrocite, goethite, and/or magnetite, with proportions varing with reductant:oxidant ratio (r:o) and the presence of P or C. Lepidocrocite was the primary product at low r:o in the absence of P or C, with evidence for multiple formation pathways. P inhibited reductive recrystallization, while C promoted goethite formation. Stoichiometric magnetite was the sole product at higher r:o in the absence and presence of P. Lepidocrocite was the primary mineralization product in the Fe(II)aq system, with magnetite observed at near equal amounts when Fe(II) was high [Fe(II)/Fe(III)]=0.5 and P was absent. P had a greater effect on reductive mineralization in the Fe(II)aq system, while AQDS was more effective than Fe(II)aq in promoting magnetite formation. The direct AH2DS-driven reductive reaction pathway produced mineral products that were different from AH2DS-ferrihydite-MRB systems, particularly in presence of P.

58 GEOSCIENCES↗