Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Performance Networking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Comparison of Ring-Buffer-Based Packet Capture Solutions

Traditional packet-capture solutions using commodity hardware incur a large amount of overhead as packets are copied multiple times by the operating system. This overhead slows sensor systems to a point where they are unable to keep up with high bandwidth traffic, resulting in dropped packets. Incomplete packet capture files hinder network monitoring and incident response efforts. While costly commercial hardware exists to capture high bandwidth traffic, several software-based approaches exist to improve packet capture performance using commodity hardware.

Barker, Steven Andrew↗
DOE OSTI2023

Computational Requirements in Clean Energy and Manufacturing: Summary report of the virtual workshop held on June 28-29, 2021

On June 28–29, 2021, the US Department of Energy’s (DOE’s) Advanced Scientific Computing Research (ASCR) program in the Office of Science convened a workshop with the Energy Efficiency and Renew able Energy (EERE) program offices to assess the future need for advanced computing resources in the areas of clean energy and advanced manufacturing. In part, this discussion served as an update to earlier workshops and townhalls. ASCR is guided by DOE mission needs as it develops research programs, computers, and networks at the leading edge of technologies. As the exascale computing era dawns, technology changes are creating new opportunities for those who must use high-performance computing (HPC) and data systems effectively. The ASCR computing facilities are augmenting their strategy to adapt to changing science needs and emerging technologies and to leverage the utility of exascale computing across the federal government.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Autoencoders on FPGAs for real-time, unsupervised new physics detection at 40 MHz at the Large Hadron Collider

In this paper, we show how to adapt and deploy anomaly detection algorithms based on deep autoencoders, for the unsupervised detection of new physics signatures in the extremely challenging environment of a real-time event selection system at the Large Hadron Collider (LHC). We demonstrate that new physics signatures can be enhanced by three orders of magnitude, while staying within the strict latency and resource constraints of a typical LHC event filtering system. This would allow for collecting datasets potentially enriched with high-purity contributions from new physics processes. Through per-layer, highly parallel implementations of network layers, support for autoencoder-specific losses on FPGAs and latent space based inference, we demonstrate that anomaly detection can be performed in as little as $80\,$ns using less than 3% of the logic resources in the Xilinx Virtex VU9P FPGA. Opening the way to real-life applications of this idea during the next data-taking campaign of the LHC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Hydrologic Model Data for the East Fork Poplar Creek Watershed Simulated with the Advanced Terrestrial Simulator (ATS): Streamflow and Network Expansion–Contraction Dynamics

This dataset supports hydrologic modeling and stream network expansion–contraction analysis for the East Fork Poplar Creek (EFPC) Watershed in Tennessee. It includes a Jupyter notebook for model setup, model configuration files, simulation outputs, and derived products used to evaluate model performance and investigate stream dynamics under varying hydrologic conditions. The dataset was generated using the Watershed Workflow Python package and the Advanced Terrestrial Simulator (ATS), enabling integrated surface–subsurface hydrologic simulations using a stream-aligned mesh. Outputs include high-resolution time series of streamflow, active network length, water table depth, and related hydrologic variables. Also included are spatially explicit stream persistency indices and classifications of reaches as perennial or non-perennial. These data facilitate reproducibility and support further research on stream intermittency and variability in network extent.The model data archive is organized in following directories:1) model_setup_inputsContains the Watershed Workflow Jupyter notebooks (accessed through any open source code editor), selected input datasets, and resulting ATS input files, including XML files (access through any open source code editor), computational mesh (.exo files can be viewed using Paraview), and meteorological forcing files (.h5 files can be accessed through h5py python package and HDFView open source software). 2) model_outputsIncludes ATS simulation outputs relevant to this study. Time series of spatially integrated or averaged variables (e.g., streamflow, water table depth) are provided as CSV files. Select spatial fields (e.g., ponded depth and water table depth) are saved as pickled Python objects to reduce file size, and can be accessed through pickle package in Python. Key geometry objects from Watershed Workflow—such as the surface mesh and river tree—are also included to support analysis of streamflow persistency and expansion–contraction dynamics. These files can also be accessed through Watershed Workflow Python package.3) model_evaluationProvides observed streamflow time series and field survey-based flow regime classifications used to evaluate model performance. Jupyter notebooks for processing ATS outputs and comparing model predictions with observations to build confidence in the model prior to scientific analysis are also included.4) Q_L_relationshipsContains workflows for generating time series of discharge, active network length, and related hydrologic variables used in the stream network expansion–contraction analysis. Includes routines for delineating baseflow-dominated periods. For each catchment, notebooks and processed data (as pickled DataFrames accessed through Pandas Python package) are provided. 5) figure_scriptsProvides the Jupyter notebooks used to generate the figures presented in the paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Survey on Privacy in Graph Neural Networks: Attacks, Preservation, and Applications

Graph Neural Networks (GNNs) have gained significant attention owing to their ability to handle graph-structured data and the improvement in practical applications. However, many of these models prioritize high utility performance, such as accuracy, with a lack of privacy consideration, which is a major concern in modern society where privacy attacks are rampant. To address this issue, researchers have started to develop privacy-preserving GNNs. Despite this progress, there is a lack of a comprehensive overview of the attacks and the techniques for preserving privacy in the graph domain. In this survey, we aim to address this gap by summarizing the attacks on graph data according to the targeted information, categorizing the privacy preservation techniques in GNNs, and reviewing the datasets and applications that could be used for analyzing/solving privacy issues in GNNs. We also outline potential directions for future research in order to build better privacy-preserving GNNs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Nanostructure-enhanced Phase Change Materials (NePCM) and HRD

Development and characterization of high aspect-ratio nanostructures tailored for dramatic improvements of thermal conductivity of phase change materials is proposed. This DOE renewal project builds upon a proven research record on development of a number of stable and functionality-proven colloids of metal oxide and metallic nanoparticles (avg. diameters less than 10 nm). These efforts followed original conceptualization and synergistic activities on promoting nanostructure-enhanced phase change materials (NePCM) and their utilization for thermal energy storage, waste heat recovery, thermal comfort, etc. Given this background, availability of promising preliminary results for the proposed target materials and formation of a new team of researchers, the investigators will focus on development of nanoadditives of metallic nanorods, functionalized carbon nanotubes, Graphene, graphite nanoplatelets, nanocomposites combining graphene with metal/metal oxide nanostructures and self-assembling carbon nanofiber-based nanomaterials. Specifically, the chemical synthesis group will identify procedures leading to nanorods of copper, copper oxide, silver and graphitic carbon exhibiting long-term stability against precipitation when dispersed in hydrocarbon solvents suitable for PCM applications. Important goals are to achieve nanorods with dimensions, including aspect ratio, that induce significant enhancements in thermal conductivity and also to control instabilities against rod precipitation during solvent freezing and melting. Another group will focus on developing complex nanoarchitectured nanocomposites through utilizing heterostructures that combine graphene with metal or metal oxide nanostructures. These heterostructures will be mixed with paraffin, fatty acids, or stearyl alcohol to realize novel NePCM. Fundamental studies will be performed by conducting materials and thermal characterization methods and structure-processing-properties relationships will be derived. In addition, growth mechanisms for the proposed heterostructures will be evaluated. Another research team will undertake a variety of approaches to functionalize the surfaces of nanostructured carbon-based materials, i.e. carbon nanotubes, Graphene and graphite nanoplatelets. The proposed techniques include both surfactant- and polymer-assisted dispersion of carbon nanotubes, Graphene and graphite nanoplatelets, in addition to microwave-initiated carbon nanotube growth to produce 3-D nanocarbon fillers for NePCM. Functionalized and pristine carbon nanotubes will also be subjected to a strong magnetic field to explore the effect of controlled alignment on the improved thermal conductivity. Microwave-initiated nanotube growth on the surfaces of the voids of graphite foam will be attempted to extend the previous work on thermal conductivity improvement of PCM that are impregnated into porous highly-conductive structures. Refinements of continuum modeling of colloids and most importantly, molecular dynamics-based mechanistic studies for carbon nanotubes and Graphene-based multi-component systems will be pursued. Finally, self-assembling carbon nanofiber-based NePCM will be investigated by another group. A highly-conductive carbon nanofiber network, which is created by a self-assembling approach, will host the PCM and enhance the thermal conductivity by several folds. Furthermore, the inert and relatively stable carbon nanofiber will be further utilized for creating low-mid range temperature NePCM and high-temperature NePCM by filling the porous space inside the self-assembling carbon nanofiber network with paraffin-based or salt-based PCM, respectively. Improved thermal energy charge/discharge performance and stable phase change temperature control features exhibited by this new generation of self-assembling carbon nanofiber-based NePCM will potentially impact many applications including solar energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2025

ESnet-JLab FPGA Accelerated Transport (data plane) [EJFAT (udplb)] v1.0

The ESnet-JLab FPGA Accelerated Transport system is a solution for streaming high-speed scientific measurement data from Data Acquisition Systems (DAQs) to high-performance computing facilties. It is generally compatible with many science workflows, and makes no assumptions about the specifics of any particular experiment. This program (udplb) implements the data plane portion of the EJFAT system. It is an FPGA design that rewrites and forwards data packets from a UDP-based scientific workflow to high-performance compute nodes. It depends on another program (udplbd, disclosed separately) to implement the control system.

Bengough, Peter [Malleable Networks, Inc.]↗
DOE OSTI2018

Simulating the Effect of Fracture Connectivity on Repository Performance with GDSA Framework - 18589

This work examines the possible migration of radionuclides from a deep geologic nuclear waste repository sited in fractured crystalline host rock. The key safety concern is the potential effect on waste isolation of the inter-connectivity of the fracture network, which is primarily established by the temporal evolution of the temperature and stress fields at the time of original rock intrusion and cooling. Two end members are considered in these simulations, one with a high degree of connectivity to the biosphere, such that advective transport through the fracture and fault network controls radionuclide migration, and the other with a low degree of connectivity, such that slow diffusive transport through the crystalline rock matrix is the controlling process for radionuclide migration to the biosphere. Both end members have several areally extensive, high-transmissivity deformation zones, whose distance to the repository is an important factor for waste isolation capability. Uncertainties in fracture properties (transmissivity, orientation, radius) and fracture distribution also give rise to uncertainty in waste isolation capability (i.e., the overall connectivity of the repository with the surface biosphere). These types of natural system uncertainties are generally present in any geologic site-characterization program and thus represent an important factor in assessing repository performance in hard rock environments. The waste considered in these simulations are spent fuel rod assemblies from the U.S. commercial nuclear reactor fleet. Thermal output of the waste must be considered in the simulations and can influence the rate and timing of waste package failure, waste form degradation, and fluid flux due to thermal expansion around the repository horizon. To achieve a high-fidelity representation of radionuclide transport in fractures and rock matrix, combined with thermal energy transport and fluid flow in fractures and matrix, the mathematical model is solved numerically in a parallel high-performance computing (HPC) environment on a finite volume unstructured grid consisting of approximately 5 million cells, using Geologic Disposal Safety Assessment (GDSA) Framework (https://pa.sandia.gov), an open-source performance assessment tool for deep underground disposal of nuclear waste. GDSA Framework uses PFLOTRAN to solve the balance equations on a three-dimensional grid with heterogeneous properties, using multiple processors in a parallel configuration based on domain decomposition. The fracture networks in these simulations are originally generated as discrete fracture networks (DFNs), which are sets of two-dimensional planes distributed in a three-dimensional domain. The method used in GDSA Framework maps the stochastically generated DFN to an equivalent continuous porous medium (ECPM) domain that allows for the simulation of coupled heat flow, fluid flow, and radionuclide transport, including heat conduction through the matrix of the fractured rock, which is a process not easily modeled in a DFN representation. Computational efficiency is also greatly enhanced using the ECPM method, allowing for a realistic representation and analysis of uncertainties in a multi-realization performance assessment of a deep geologic repository. The effect of fracture connectivity on the waste isolation safety function, as brought to light by these GDSA Framework simulations, points to the importance of including a realistic representation of uncertainties in fracture properties and distribution (effectively, uncertainty in spatial heterogeneity) in repository safety assessment simulations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Synthesis of CdZnTeSe single crystals for room temperature radiation detector fabrication: mitigation of hole trapping effects using a convolutional neural network

In this article, we report the growth of Cd 0.9 Zn 0.1 Te 0.97 Se 0.03 (CZTS) wide bandgap semiconductor single crystals for room temperature gamma-ray detection using a modified vertical Bridgman method. Charge transport properties measured in the radiation detectors, fabricated from the grown CZTS crystals, indicated signs of hole trapping. Hole traps inhibit high-resolution radiation detection especially for energetic gamma rays. Machine learning (ML) applications are gaining tremendous mpetus in improving device and sensor performance by compensating for limi tations arising from such intrinsic material properties. In this article, we describe a deep convolutional neural network (CNN) that has demonstrated remarkable efficiency in identifying the energy of a gamma photon detected by a CZTS detector. The CNN has been trained using simulated data that resemble output pulses from actual CZTS detectors when exposed to 662-keV gamma photons. The device properties required for the simulation have been derived from radiation detection measurements on a real Cd 0.9 Zn 0.1 Te 0.97 Se 0.03 detector fabricated in our laboratory. The CNN has been trained with detector pulses arising through photoelectric (PE) and Compton scattering (CS) separately. The percentage error in predicting the detected energies, within an extremely small duration of 0.28 ms, was found to be lower than 0.1% for gamma energies above 50 keV and for training datasets con taining PE and CS events separately. The CNN was also validated for a mixed PE and CS dataset to obtain a prediction error of 1%. Additionally, the effect of detector resolution on the efficiency of the CNN was also explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Machine learning enabled discovery of application dependent design principles for two-dimensional materials

Abstract The unique electronic and mechanical properties of two-dimensional (2D) materials make them promising next-generation candidates for a variety of applications. Large-scale searches for high-performing 2D materials are limited to calculating descriptors with computationally demanding first-principles density functional theory. In this work, we alleviate this issue by extending and generalizing crystal graph convolutional neural networks to systems with planar periodicity and train an ensemble of models to predict thermodynamic, mechanical and electronic properties. We carry out a screening of nearly 45,000 structures for two separate applications: mechanical strength and photovoltaics. By collecting statistics of the screened candidates, we investigate structural and compositional design principles that impact the properties of the structures surveyed. Our approach recovers some well-accepted design rules: hybrid organic-inorganic perovskites with lead and tin tend to be good candidates for solar cell applications and titanium based MXenes usually have high stiffness coefficients. Interestingly, other members of the group 4 elements also contribute to increasing the mechanical strength of MXenes. For all-inorganic perovskites, we discover some compositions that have not been deeply studied in the field of photovoltaics and thus open up paths for further investigation. We open-source the code-base to spur further development in this space.

Venturi, Victor (ORCID:0000000156727549)↗
DOE OSTI2018

FAODEL

FAODEL is a collection of libraries for implementing data management services on high-performance computing (HPC) platforms. It is composed of several components: (1) an RDMA portability library called NNTI for transporting data, (2) an in-application, restful API service, (3) a memory management library for network memory named Lunasa, (4) an asynchronous communication engine, and (5) a distributed key/blob service names Kelpie. Application developers may use these libraries to move data between the distributed nodes of one job to another, as well as to distributed storage resources. FAODEL is different than other communication libraries in that it supports both intra- and inter-job communication, features event-driven mechanisms, and provides high-level primitives for developers to reason about a platform’s distributed resources.

ECP↗
DOE OSTI2024

Smart pixel sensors: towards on-sensor filtering of pixel clusters with deep learning

Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High- Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of $\mathcal{O}$(40 MHz) and intelligently reduces the data within the pixelated region of the detector at rate will enhance physics performance at high luminosity and enable physics analyses that are not currently possible. Using the shape of charge clusters deposited in an array of small pixels, the physical properties of the traversing particle can be extracted with locally customized neural networks. In this first demonstration, we present a neural network that can be embedded into the on-sensor readout and filter out hits from low momentum tracks, reducing the detector's data volume by 57.1%–75.7%. The network is designed and simulated as a custom readout integrated circuit with 28 nm CMOS technology and is expected to operate at less than 300 μW with an area of less than 0.2 mm 2 . The temporal development of charge clusters is investigated to demonstrate possible future performance gains, and there is also a discussion of future algorithmic and technological improvements that could enhance efficiency, data reduction, and power per area.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Machine Learning-Assisted High-Temperature Reservoir Thermal Energy Storage Optimization: Numerical Modeling and Machine Learning Input and Output Files

This data set includes the numerical modeling input files and output files used to synthesize data, and the reduced-order machine learning models trained from the synthesized data for reservoir thermal energy storage site identification. In this study, a machine-learning-assisted computational framework is presented to identify High-Temperature Reservoir Thermal Energy Storage (HT-RTES) site with optimal performance metrics by combining physics-based simulation with stochastic hydrogeologic formation and thermal energy storage operation parameters, artificial neural network regression of the simulation data, and genetic algorithm-enabled multi-objective optimization. A doublet well configuration with a layered (aquitard-aquifer-aquitard) generic reservoir is simulated for cases of continuous operation and seasonal-cycle operation scenarios. Neural network-based surrogate models are developed for the two scenarios and applied to generate the Pareto fronts of the HT-RTES performance for four potential HT-RTES sites. The developed Pareto optimal solutions indicate the performance of HT-RTES is operation-scenario (i.e., fluid cycle) and reservoir-site dependent, and the performance metrics have competing effects for a given site and a given fluid cycle. The developed neural network models can be applied to identify suitable sites for HT-RTES, and the proposed framework sheds light on the design of resilient HT-RTES systems. All the simulations and the neural network model were done by Idaho National Laboratory. A detailed description of the work was reported in publication linked below.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Comparative Analysis of HEATNETS for Geothermal Network Performance: Preprint

Thermal energy networks (TENs), also known as 5th generation district energy systems, or more specifically geothermal networks when exchanging heat with geothermal boreholes, are an important technology for decarbonization. In these networks an ambient loop connects buildings and thermal sources, such as a borehole field, to exchange energy and maintain a desired loop temperature. Water-source heat pumps are used at the buildings to connect to the ambient or thermal loop to meet to the building heating and cooling loads and maintain comfort. A semi-transient, reduced-order technical model and techno-economic model, called HEATNETS, has been developed at NREL that captures the flow of energy around a TEN. In this work, a comparison of the HEATNETS technical model and a well-known coding platform used for modeling geothermal networks, TRNSYS, has been completed for a proposed geothermal network as a verification process. Hourly data provided from the TRNSYS simulation included building loads, pumping power, heat pump power, temperature entering and leaving the borehole field, and mass flow rates. The hourly borehole temperatures were used to create a linear regression model utilized in HEATNETS to estimate the borehole field heat exchange. The building loads and mass flow rates were direct inputs to HEATNETS while the pumping power, heat pump power, borehole temperatures, and coefficients of performance were all simulated and calculated by HEATNETS, allowing for direct comparison of the thermal energy transfer, rather than also comparing control systems responses. HEATNETS considers the full process from design inputs to economic outputs and can provide modeling options for high-level initial system design and operational optimization. This study shows that HEATNETS, while not intended to replace other modeling tools, can be a unique modeling tool for the performance of a full geothermal network system.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Sulfur Conversion to Donor‐Acceptor Ladder Polymer Networks through Mechanochemical Nucleophilic Aromatic Substitution for Efficient CO 2 Photoreduction

The development of synthetic methods capable of converting elemental sulfur into conjugated porous sulfur‐rich polymers remains a great challenge, although direct utilization of this readily available feedstock can significantly enrich its uses and circumvent environmental problems during sulfur storage. Here, we report herein mechanochemical (MC) nucleophilic aromatic substitution (S N Ar) that enables sulfur conversion into thianthrene‐bridged porous ladder polymer networks with dense donor‐acceptor (D−A) molecular junctions. We demonstrate that the key lies in the generation of bent thianthrene units through a solid‐state ball‐milling condensation reaction between 1,2‐dihaloarenes and elemental sulfur. We also show that the assembling of D−A structural motifs into porous networks affords efficient visible‐light‐driven photocatalytic reduction of carbon dioxide (CO 2 ) with water (H 2 O) vapor, in the absence of any additional photosensitizer, sacrificial agents or cocatalysts. Exceptional photoinduced charge separation along with boosted exciton dissociation results in a high‐performance of carbon monoxide (CO) production rate of 306.1 μmol g −1 h −1 with near 100 % CO selectivity, which is accompanied by H 2 O oxidation to O 2 , as confirmed by both experimental and theoretical results. We anticipate this novel MC S N Ar approach will advance processing techniques for direct sulfur utilization and facilitate new possibilities for the synthesis of D−A ladder polymer networks with promising potential in photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes

High nickel content in LiNi x Co y Mn z O 2 (NCM, x ≥ 0.8, x + y + z = 1) layered cathode material allows high specific energy density in lithium-ion batteries (LIBs). However, Ni-rich NCM cathodes suffer from performance degradation, mechanical and structural instability upon prolonged cell cycling. Although the use of single-crystal Ni-rich NCM can mitigate these drawbacks, the ion-diffusion in large single-crystal particles hamper its rate capability. Herein, we report a strategy to construct an in situ Li 1.4 Y 0.4 Ti 1.6 (PO 4 ) 3 (LYTP) ion/electron conductive network which interconnects single-crystal LiNi 0.88 Co 0.09 Mn 0.03 O 2 (SC-NCM88) particles. The LYTP network facilitates the lithium-ion transport between SC-NCM88 particles, mitigates mechanical instability and prevents detrimental crystalline phase transformation. When used in combination with a Li metal anode, the LYTP-containing SC-NCM88-based cathode enables a coin cell capacity of 130 mAh g -1 after 500 cycles at 5 C rate in the 2.75-4.4 V range at 25 °C. Tests in Li-ion pouch cell configuration (i.e., graphite used as negative electrode active material) demonstrate capacity retention of 85% after 1000 cycles at 0.5 C in the 2.75-4.4 V range at 25 °C for the LYTP-containing SC-NCM88-based positive electrode.

25 ENERGY STORAGE↗
DOE OSTI2019

Enhanced Stability of Li Metal Anodes by Synergetic Control of Nucleation and the Solid Electrolyte Interphase

Use of a protective coating on a lithium (Li) metal anode (LMA) is an effective approach to enhance its coulombic efficiency and cycling stability. Here we report a facile approach to produce uniform silver (Ag) nanoparticle-decorated LMAs for high-performance Li metal batteries (LMBs). This effective treatment can lead to well controlled nucleation and the formation of a stable solid electrolyte interphase (SEI). Ag nanoparticles embedded in the surface of Li anodes induced uniform Li plating/stripping morphologies with reduced overpotential. More importantly, cross-linked lithium fluoride (LiF) networks formed during Ag+ reduction enabled a highly stable SEI layer. Based on the Ag-LiF decorated anodes, LMBs with LiNi1/3Mn1/3Co1/3O2 cathode (~1.8 mAh cm-2) can retain >80% capacity over 500 cycles. The similar results were also obtained when the same approach was applied to the design of stable sodium (Na) anodes. These results indicate that synergetic control of the nucleation and SEI is an efficient approach to stabilize rechargeable metal batteries.

anode↗
DOE OSTI2022

Accelerating cosmological inference with Gaussian processes and neural networks – an application to LSST Y1 weak lensing and galaxy clustering

ABSTRACT Studying the impact of systematic effects, optimizing survey strategies, assessing tensions between different probes and exploring synergies of different data sets require a large number of simulated likelihood analyses, each of which cost thousands of CPU hours. In this paper, we present a method to accelerate cosmological inference using emulators based on Gaussian process regression and neural networks. We iteratively acquire training samples in regions of high posterior probability which enables accurate emulation of data vectors even in high dimensional parameter spaces. We showcase the performance of our emulator with a simulated 3×2 point analysis of LSST-Y1 with realistic theoretical and systematics modelling. We show that our emulator leads to high-fidelity posterior contours, with an order of magnitude speed-up. Most importantly, the trained emulator can be re-used for extremely fast impact and optimization studies. We demonstrate this feature by studying baryonic physics effects in LSST-Y1 3×2 point analyses where each one of our MCMC runs takes approximately 5 min. This technique enables future cosmological analyses to map out the science return as a function of analysis choices and survey strategy.

Astronomy & Astrophysics↗