Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERROGATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Reductive Dissolution Mechanisms at the Hematite-Electrolyte Interface Probed by In Situ X-ray Scattering

The electron-catalyzed dissolution and reprecipitation of iron (oxyhydr)oxides constitute critical steps in natural geochemical iron cycling. However, the atomic-scale mechanisms of reductive dissolution and oxidative precipitation of Fe2+ remain poorly understood because they are difficult to directly experimentally probe. Using in situ synchrotron X-ray scattering and a novel electrochemical cell, we interrogate the interfacial structure between the hematite (?-Fe2O3) (11 ¯02) surface and acidic aqueous solution (5 mM Na2SO4, pH 4.0) under controlled electrochemical potential from open circuit to cathodic bias as the reductive dissolution potential is approached and then exceeded. The crystalline order of the surface improves under mild reducing conditions, and the surface Fe stoichiometry changes with cathodic bias. After significant reductive dissolution occurs and cathodic bias is removed, dissolved Fe is re-deposited, forming a disordered interface. Unlike at circumneutral pH, water layers at the hematite interface with acidic solution are poorly ordered, likely due to the adsorption of sulfate from the electrolyte. These results provide a novel atomic-scale view into the behavior of reducible transition metal oxide surfaces under fluctuating (electro)chemical conditions.

McBriarty, Martin E.↗
DOE OSTI2021

Mapping Molecular Adsorption Configurations with < 5 nm Spatial Resolution through Ambient Tip-Enhanced Raman Imaging

We interrogate para-mercaptobenzoic acid (MBA) molecules chemisorbed onto plasmonic silver nanocubes through tip-enhanced Raman (TER) spectral nano-imaging. Through a detailed examination of the spectra, aided by correlation analysis and density functional theory calculations, we find that MBA chemisorbs onto the plasmonic particles with at least two distinct configurations: S- and CO2-bound. High spatial resolution TER mapping allows us to distinguish between the distinct adsorption geometries with a pixel-limited (< 5 nm) spatial resolution under ambient laboratory conditions.

Gabel, Matthew L.↗
DOE OSTI2021

Imaging Plasmons with Sub-2 nm Spatial Resolution via Tip-Enhanced Four-Wave Mixing

Four-wave mixing at plasmonic tip-sample nanojunctions may be used to visualize plasmonic fields with sub-2nm spatial resolution under ambient laboratory conditions. We illustrate the latter using a gold-coated atomic force microscopy probe irradiated with a pair of near-IR femtosecond laser pulses and used to interrogate plasmonic gold nanoplates and silver nanocubes. Through diagnostic polarization-dependent tip-only measurements, we illustrate that the 4-wave mixing signal is localized to the tip apex. The apex-bound signal is further enhanced when the tip is located near plasmonic nanoparticles. Overall, this work paves the way for visualizing coherent electronic and vibrational dynamics with joint femtosecond temporal and few-nanometer spatial resolution under ambient conditions.

Wang, Chih-Feng↗
DOE OSTI2025

Determination of Thiol Protonation States by Sulfur X-ray Spectroscopy in Biological Systems

Cysteine is one of the most functionally diverse of the proteinogenic amino acids, owing to its reactive thiol side chain that can undergo deprotonation to form a strongly nucleophilic thiolate. However, few techniques can directly interrogate sulfur charge and covalency in cysteine, particularly in proteins. X-ray spectroscopies provide an element specific probe of sulfur. We demonstrate the sensitivity of S Kβ and Kα X-ray emission spectroscopy (XES) to cysteine ionization and compare it to S K-edge X-ray absorption spectroscopy (XAS) in the physiologically relevant biomolecules l-cysteine and N-acetyl-l-cysteine at room temperature in solution phase. Kβ XES and K-edge XAS are most sensitive to chemical changes at the cysteine thiol and can be used to evaluate the composition of thiol/thiolate mixtures. Furthermore, these results provide a foundation for assessing the pK a of functionally significant cysteine residues in proteins and open the door to time-resolved studies of cysteine-dependent enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Complete wetting of Pt(111) by nanoscale liquid water films

The melting and wetting of nanoscale crystalline ice films on Pt(111) that are transiently heated above the melting point using nanosecond laser pulses are studied with infrared refection absorption spectroscopy (IRAS) and Kr temperature programmed desorption (TPD). The as-grown crystalline ice films consist of isolated nanoscale ice crystallites embedded in a hydrophobic water monolayer. Upon heating above the melting point, these ice crystallites rapidly melt to form nanoscale droplets of liquid water. Rapid cooling of the system to cryogenic temperatures after each laser pulse quenches the water films and allows them to be interrogated with IRAS, Kr TPD and other ultrahigh vacuum surface science techniques. With each successive heat pulse, these liquid drops spread across the surface until it is entirely covered with multilayer water films after several pulses. These results, which show that nanoscale water films completely wet Pt(111), are in contrast to molecular dynamics simulations predicting partial wetting of nanoscale water drops on a hydrophobic water monolayer. The results provide valuable new insights into the wetting characteristics of nanoscale water films on a clean, well-characterized single crystal surface.

Xu, Yuntao↗
DOE OSTI2017

Integrating Ab Initio Simulations and X-ray Photoelectron Spectroscopy: Toward A Realistic Description of Oxidized Solid/Liquid Interfaces

Many energy storage and conversion devices rely on processes that take place at complex interfaces, where structural and chemical properties are often difficult to probe under operating conditions. A primary example is solar water splitting using high-performance photoelectrochemical cells, where surface chemistry, including native oxide formation, affects hydrogen generation. In this Perspective, we discuss some of the challenges associated with interrogating interface chemistry, and how they may be overcome by integrating high-level first-principles calculations of explicit interfaces with ambient pressure X-ray photoelectron spectroscopy and direct spectroscopic simulations. We illustrate the benefit of this combined approach toward insights into native oxide chemistry at prototypical InP/water and GaP/water interfaces. Lastly, this example suggests a more general roadmap for obtaining a realistic and reliable description of the chemistry of complex interfaces by combining state-of-the-art computational and experimental techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Both Free and Trapped Carriers Contribute to Photocurrent of Sb 2 Se 3 Solar Cells

Polycrystalline semiconductor films, such as methylammonium lead iodide, cadmium telluride, copper-indium-gallium selenide, etc., are being intensively studied due to their great potential for highly efficient and cost-effective solar cells. Among them, polycrystalline antimony chalcogenide films are also promising for photovoltaic applications because they are nontoxic, stable, flexible, and have a suitable bandgap. Considerable effort has already been devoted to improving the power conversion efficiency of antimony chalcogenide solar cells, but their efficiency still lingers below 10% due in part to scarce fundamental optoelectronic studies that help guide their development. Here, we use a combination of time-resolved terahertz and transient absorption spectroscopies to interrogate the optoelectronic behavior of antimony selenide thin films. By combining these two techniques we are able to monitor both free and trapped carrier dynamics and then evaluate their respective diffusion lengths. Our results indicate that trapped carriers remain mobile and can reach charge collecting interfaces prior to recombination, and therefore, both free and trapped carriers can contribute to the photocurrent of antimony selenide solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Phosphoproteome Response to Dithiothreitol Reveals Unique Versus Shared Features of Saccharomyces cerevisiae Stress Responses

To cope with sudden changes in the external environment, the budding yeast Saccharomyces cerevisiae orchestrates a multifaceted response that spans many levels of physiology. Several studies have interrogated the transcriptome response to endoplasmic reticulum (ER) stress and the role of regulators such as the Ire1 kinase and Hac1 transcription factors. However, less is known about responses to ER stress at other levels of physiology. Here, we used quantitative phosphoproteomics and computational network inference to uncover the yeast phosphoproteome response to the reducing agent dithiothreitol (DTT) and the upstream signaling network that controls it. We profiled wild-type cells and mutants lacking IRE1 or MAPK kinases MKK1 and MKK2, before and at various times after DTT treatment. In addition to revealing downstream targets of these kinases, our inference approach predicted new regulators in the DTT response, including cell-cycle regulator Cdc28 and osmotic-response kinase Rck2, which we validated computationally. Our results also revealed similarities and surprising differences in responses to different stress conditions, especially in the response of protein kinase A targets. Furthermore, these results have implications for the breadth of signaling programs that can give rise to common stress response signatures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Dynamics of Nanoparticles in Entangled Polymer Solutions

The mean square displacement < r 2 > of nanoparticle probes dispersed in simple isotropic liquids and in polymer solutions is interrogated using fluorescence correlation spectroscopy and single-particle tracking (SPT) experiments. Probe dynamics in different regimes of particle diameter (d), relative to characteristic polymer length scales, including the correlation length (ξ), the entanglement mesh size (a), and the radius of gyration (R g ), are investigated. In simple fluids and for polymer solutions in which d >> R g , long-time particle dynamics obey random-walk statistics < r 2 >:t, with the bulk zero-shear viscosity of the polymer solution determining the frictional resistance to particle motion. In contrast, in polymer solutions with d < R g , polymer molecules in solution exert noncontinuum resistances to particle motion and nanoparticle probes appear to interact hydrodynamically only with a local fluid medium with effective drag comparable to that of a solution of polymer chain segments with sizes similar to those of the nanoparticle probes. Under these conditions, the nanoparticles exhibit orders of magnitude faster dynamics than those expected from continuum predictions based on the Stokes–Einstein relation. SPT measurements further show that when d > a, nanoparticle dynamics transition from diffusive to subdiffusive on long timescales, reminiscent of particle transport in a field with obstructions. This last finding is in stark contrast to the nanoparticle dynamics observed in entangled polymer melts, where X-ray photon correlation spectroscopy measurements reveal faster but hyperdiffusive dynamics. As a result, we analyze these results with the help of the hopping model for particle dynamics in polymers proposed by Cai et al. and, on that basis, discuss the physical origins of the local drag experienced by the nanoparticles in entangled polymer solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Grain Growth and Coarsening Dynamics in a Compositionally Asymmetric Block Copolymer Revealed by X-ray Photon Correlation Spectroscopy

The dynamics of nanostructured soft materials crucially impact their associated macroscopic material properties, yet they are often difficult to measure due to spatiotemporal limitations of conventional instrumentation. Herein, we use X-ray photon correlation spectroscopy (XPCS) to directly observe particle-scale dynamics during grain growth and coarsening in a BCC- forming diblock polymer melt, with specific attention to the distribution of structural relaxation times associated with the interplanar (110) distance. Following sample quenching from the disordered state, these dynamical phenomena surprisingly exhibit little dependence on time and thermal quench depth. We posit that these relaxations stem from collective particle motions during grain rotation. We also observe unusual internally-referenced heterodyne correlations, which enable measurements of speed distributions within the sample. In this work, these speeds are significantly slower and appear at much longer annealing times than those previously reported during grain nucleation and growth in microphase separated block polymer melts. Drawing on analogies between polycrystalline hard and soft materials, we ascribe these speed distributions to misorientation-dependent grain boundary migration during ordered domain coarsening and anomalously fast, cooperative string-like particle motion along the grain boundaries. Thus, these coherent X-ray measurements provide new opportunities to interrogate grain boundary structure and dynamics in polycrystalline soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Source of Processable Vitrimer Viscosities: Swap Frequencies and Steric Factors

Vitrimers exhibit high, processable viscosities, where other polymers do not, and are among the most promising polymers for closed-loop material circularity. We sought to investigate the underlying chemical kinetic factors that result in high viscosities for vitrimers, which are crucial to designing vitrimers with tunable viscosity. To interrogate these factors, we achieved the first simulated predictions of real vitrimer viscosities, using a novel kinetic Monte Carlo molecular dynamics method, overcoming the time and length scale gaps to predict experimental bulk viscosities. The vitrimer architecture investigated is based on poly(dimethylsiloxane) chains and vinylogous urethane bond swaps. We probed the effects of the extent of free swapping groups, %F, the activation energy, E A , and the steric factor, ρ. The steric factor is related to the intrinsic reaction probability for molecules with sufficient energy. All three factors were found to be significant, but the role of ρ was found to be the biggest and also the most underappreciated. The results show that the inclusion of accurate ρ is of critical importance for viscosity predictions, with the evidence suggesting that the typical assumption of ρ = 1 is not valid for vitrimers and that, indeed, very low steric factors are present in bond-swap vitrimers such that values of ρ < 10 –10 may be typical. This greatly influences the bond exchange rates and, ultimately, the viscosities. Recognition of this result is necessary for the prediction of vitrimer viscosities from molecular simulations and to make vitrimers by design from molecular dynamics. We also investigated the effects that E A , ρ, and the number of free swapping groups have upon vitreous range temperatures, TV, with respect to achieving a specific viscosity (η V = 1 × 10 8 Pa·s), as well as for a commonly reported higher viscosity extrapolation (η V = 1 × 10 12 Pa·s). The evidence suggests that vitrimers may follow universal curves for E A vs T V , as a function of ρ. Finally, this study achieves the first of these comparisons of molecular simulations to experiments and reveals critical insights toward creating vitrimers by design, while providing a route for the prediction of T V from kinetic Monte Carlo molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hierarchical Self-Assembly of Carbon Dots into High-Aspect-Ratio Nanowires

Here, we report a spontaneous and hierarchical self-assembly mechanism of carbon dots prepared from citric acid and urea into nanowire structures with large aspect ratios (>50). Scattering-type scanning near-field optical microscopy (s-SNOM) with broadly tunable mid-IR excitation was used to interrogate details of the self-assembly process by generating nanoscopic chemical maps of local wire morphology and composition. s-SNOM images capture the evolution of wire formation and the complex interplay between different chemical constituents directing assembly over the nano- to microscopic length scales. We propose that residual citrate promotes tautomerization of melamine surface functionalities to produce supramolecular shape synthons comprised of melamine-cyanurate adducts capable of forming long-range and highly directional hydrogen-bonding networks. This intrinsic, heterogeneity-driven self-assembly mechanism reflects synergistic combinations of high chemical specificity and long-range cooperativity that may be harnessed to reproducibly fabricate functional structures on arbitrary surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Probing Linewidths and Biexciton Quantum Yields of Single Cesium Lead Halide Nanocrystals in Solution

Cesium lead halide (CsPbX 3 , X = Cl, Br, I) perovskite nanocrystals (PNCs) have recently become a promising material for optoelectronic applications due to their high emission quantum yields and facile band gap tunability via both halide composition and size. The spectroscopy of single PNCs enhances our understanding of the effect of confinement on excitations in PNCs in the absence of obfuscating ensemble averaging and can also inform synthetic efforts. However, single PNC studies have been hampered by poor PNC photostability under confocal excitation, precluding interrogation of all but the most stable PNCs, and leading to a lack of understanding of PNCs in the regime of high confinement. Here, we report the first comprehensive spectroscopic investigation of single PNC properties using solution-phase photon-correlation methods, including both highly confined and blue-emitting PNCs, previously inaccessible to single NC techniques. With minimally perturbative solution-phase photon-correlation Fourier spectroscopy (s-PCFS), we establish that the ensemble emission linewidth of PNCs of all sizes and compositions is predominantly determined by the intrinsic single PNC linewidth (homogeneous broadening). The single PNC linewidth, in turn, dramatically increases with increasing confinement, consistent with what has been found for II–VI semiconductor nanocrystals. With solution-phase photon antibunching measurements, we survey the biexciton-to-exciton quantum yield ratio (BX/X QY) in the absence of user-selection bias or photodegradation. Remarkably, the BX/X QY ratio depends both on the PNC size and halide composition, with values between ~2% for highly confined bromide PNCs and ~50% for intermediately confined iodide PNCs. Our results suggest a wide range of underlying Auger rates, likely due to transitory charge carrier separation in PNCs with relaxed confinement.

single nanocrystal spectroscopy↗
DOE OSTI2021

Photocatalytic Transfer Hydrogenation in Water: Insight into Mechanism and Catalyst Speciation

Organometallic catalysts with strong metal-to-ligand charge-transfer (MLCT) optical transitions and reactive metal-hydride bonds provide opportunities for new excited-state reactivity. Toward this end, we have investigated photoinduced transfer hydrogenation reactions for a series of Cp*IrH complexes with functionalized bipyridyl ligands. Overcoming the baseline reactivity of this class of catalyst toward hydrogen evolution in aqueous media presents a major challenge for focusing this photochemical reactivity into desired transformations of more complex organic substrates. In this work, a photochemically induced aqueous ketone reduction catalyzed by [Cp*Ir(bpy)H][Cl] is reported and benchmarked to the competing hydrogen evolution reaction (HER). A detailed mechanistic study is conducted of the reduction of cyclohexanone with sodium formate delivering the reducing equivalent. Examining the kinetic profile of the cyclohexanone reduction revealed an unexpected induction period, suggesting a more complex underlying reaction mechanism where product selectivity was not simply a function of direct competition from a common excited-state reactive intermediate. The reaction kinetics were analyzed by variable time normalization analysis (VTNA), and the catalyst resting state was interrogated through operando light-emitting diode (LED) illumination H-1 NMR spectroscopy. Overall, these and other mechanistic studies provide insight into a photochemical reaction pathway to ketone reduction that is distinct from that previously reported for HER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Considering a Possible Role for [H-Fe 4 N(CO) 12 ] 2- in Selective Electrocatalytic CO 2 Reduction to Formate by [Fe 4 N(CO) 12 ] -

[Fe 4 N(CO) 12 ] - is a first-row transition element electrocatalyst that selectively produces C–H bonds to give formate from CO 2 in water at -1.2 V vs SCE. We present a thermochemical analysis which probes the possibility that [H-Fe 4 N(CO) 12 ] 2– ((H- 1 ) 2– ) is an intermediate in this process: we show that (H- 1 ) 2– is accessible at -1.2 V vs SCE, but if it were formed, we predict that it would generate H 2 . [Fe 4 N(CO) 12 ] 3– and (H- 1 ) 2– were interrogated spectroscopically, and the product of CO loss, [Fe 4 N(CO) 9 (μ-CO) 2 ] 3– , was synthesized and characterized. Ultimately, we demonstrate that (H- 1 ) 2– is an unlikely participant in the catalytic transformation of CO 2 to formate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Tunable SiN Hybrid Conjugated Materials

Here, we report the synthesis of a family of N-aryl cyclosilazanes. The reaction of 1,2-bis(trifluoromethanesulfonate)tetramethyldisilane with para-substituted anilines gives six-membered rings with no observed condensation polymerization. X-ray crystallography reveals the cyclosilazane adopts a twist boat conformation with both nitrogens in a trigonal planar geometry. Solution phase UV–vis spectroscopic studies coupled with density functional theory calculations interrogate the ability of the nitrogen atom to bridge the σ- and π-conjugated moieties. Depending on the aromatic substituent, the cyclosilazane rings could either more or less electron rich than an all silicon ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influence of Surface Defects on WO 3 Photoelectrodes for Catalyzing Chloride Oxidation in Water

Tungsten oxide (WO 3 ) is an n-type semiconductor due to oxygen vacancies (□ O •• in Kroger-Vink notation) or surface protonation as H x WO 3 . It is one of the few acid-stable oxides under large positive bias, which makes WO 3 ideal for interrogating the mechanism of the chloride oxidation reaction (COR). The large, positive valence band edge of ∼3 eV provides the overpotential necessary to carry out the COR, but the reaction competes with the oxygen-evolution reaction in water. The □ O •• defect density can be controlled by the atmosphere under which the material is annealed, so WO 3 films were prepared by a spin-coating method from an ammonium metatungstate precursor annealed at 500 °C under air, flowing O 2 , and flowing argon. Annealing the films in a flowing O 2 atmosphere hinders the formation of □ O ••, and annealing in Ar leads to greater surface W 6+ , likely due to expelling intercalated H + . The saturated photocurrent density (j ph ) is highest in films with the greatest concentration of W 5+ and greatest concentration of oxide defects: (0.66 mA/cm 2 annealed in air, 0.58 mA/cm 2 annealed in Ar, and 0.49 mA/cm 2 annealed in O 2 , reported at 1.5 V vs Ag/AgCl, pH 3 (before the onset of a dark reaction). The defect concentrations are determined by X-ray photoelectron spectroscopy. In all cases the Faradaic efficiency for the COR is near unity. Finally, we demonstrate that W 5d states can be probed by ligand K-edge X-ray absorption near-edge spectroscopy via pre-edge (Cl 1s → W 5d) transitions, lower in energy than the ligand-centered (Cl 1s → 4p) transition. We use this analysis to show the presence of W─Cl covalent bonds on the WO 3 films post-COR, corroborated by DFT calculations. Furthermore, this result stands in contrast to the commonly assumed mechanistic proposal invoking outer-sphere electron transfer to a physisorbed chloride ion.

Cl K-edge↗
DOE OSTI2021

Understanding the Photochemical Properties of Polythiophene Polyelectrolyte Soft Aggregates with Sodium Dodecyl Sulfate for Antimicrobial Activity

The threat of antibiotic-resistant bacteria is an ever-increasing problem in public health. In this report, we examine the photochemical properties with a proof-of-principle biocidal assay for a novel series of regio-regular imidazolium derivative poly-(3-hexylthiophene)/sodium dodecyl sulfate (P3HT-Im/SDS) materials from ultrafast sub-ps dynamics to μs generation of reactive oxygen species (ROS) and 30 min biocidal reactivity with Escherichia coli (E. coli). This broad series encompassing pure P3HT-Im to cationic, neutral, and anionic P3HT-Im/SDS materials are all interrogated by a variety of techniques to characterize the physical material structure, electronic structure, and antimicrobial activity. Our results show that SDS complexation with P3HT-Im results in aggregate materials with reduced ROS generation and light-induced anti-microbial activity. However, our characterization reveals that the presence of non-aggregated or lightly SDS-covered polymer segments is still capable of ROS generation. Full encapsulation of the P3HT-Im polymer completely deactivates the light killing pathway. High SDS concentrations, near and above critical micelle concentration, further deactivate all anti-microbial activity (light and dark) even though the P3HT-Im regains its electronic properties to generate ROS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗