Search NASA⌕ Search

SEARCH · Search NASA

Results for “IONIC CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Synthesis and crystal structure of a novel lithium bismuth phosphate, Li{sub 2}Bi{sub 14.67}(PO{sub 4}){sub 6}O{sub 14}

A lithium bismuth phosphate, Li{sub 2}Bi{sub 14.67}(PO{sub 4}){sub 6}O{sub 14}, has been synthesized for the first time by the solid-state method. The crystal structure was determined by single crystal X-ray diffraction at 150 K. Li{sub 2}Bi{sub 14.67}(PO{sub 4}){sub 6}O{sub 14} crystallizes in the monoclinic system C2/c (No. 15), with a = 30.8189(4) A, b = 5.2691(3) A, c = 24.5302(3) A, {beta} 122.84(2){sup o}, V = 3346.81(1) A{sup 3} and Z = 2. The structure along the b axis consists of layers of [Bi{sub 2}O{sub 2}] units as the basic building block. These are separated by isolated PO{sub 4} and LiO{sub 4} tetrahedra. The oxygen co-ordination around two of the phosphorus atoms is disordered. Solid-state {sup 7}Li NMR studies confirm the presence of lithium in the structure. The material shows ionic conductivity of the order of 10{sup -5} S cm{sup -1} at 600 deg. C.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Gd{sup 3+} and Nd{sup 3+} co-doped ceria by using citric acid-nitrate combustion method

A series of Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} (x = 0-0.20) compositions have been synthesized by citric acid-nitrate combustion method. XRD measurements indicate that all the obtained materials crystallized in cubic fluorite-type structure. Lattice parameters were calculated by Rietveld method and the parameter a values in Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} system obey Vegard's law, a (A) = 5.4224 + 0.1208x. The obtained powders have good sinterability and the relative density could reach above 95% after being sintered at 1400 {sup o}C. Impedance spectroscopy measurements indicated that the conductivity of Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} first increased and then decreased with Nd dopant content x. The maximum conductivity, {sigma}{sub 700{sup o}C} = 6.26 x 10{sup -2} S/cm, was found in Ce{sub 0.8}Gd{sub 0.12}Nd{sub 0.08}O{sub 1.9} when sintered at 1300 {sup o}C. The corresponding activation energies of conduction had a minimum value E{sub a} = 0.676 eV. The results tested experimentally the validity of the effective atomic number concept of recent density functional theory, which had suggested that co-dopant with effective atomic number between 61 (Pm) and 62 (Sm) was the ideal dopant exhibiting high ionic conductivity and low activation energy.

36 MATERIALS SCIENCE↗

Ion exchange and electrochemical evaluation of the microporous phosphate Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}

A new lithium iron(III) phosphate, Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}, has been synthesized and is currently under electrochemical evaluation as an anode material for rechargeable lithium-ion battery applications. The sample was prepared via the ion exchange reaction of Cs{sub 5}K{sub 4}Fe{sub 7}(PO{sub 4}){sub 10}1 in the 1 M LiNO{sub 3} solution under hydrothermal conditions at 200 deg. C. The fully Li{sup +}-exchanged sample Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}2 cannot yet be synthesized by conventional high-temperature, solid-state methods. The parent compound 1 is a member of the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series that was previously isolated from a high-temperature (750 deg. C) reaction employing the eutectic CsCl/KCl molten salt. The polycrystalline solid 1 was first prepared in a stoichiometric reaction via conventional solid-state method then followed by ion exchange giving rise to 2. Both compounds adopt three-dimensional structures that consist of orthogonally interconnected channels where electropositive ions reside. It has been demonstrated that the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series possesses versatile ion exchange capabilities with all the monovalent alkali metal and silver cations due to its facile pathways for ion transport. 1 and 2 were subject to electrochemical analysis and preliminary results suggest that the latter can be considered as an anode material. Electrochemical results indicate that Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10} is reduced below 1 V (vs. Li) to most likely form a Fe(0)/Li{sub 3}PO{sub 4} composite material, which can subsequently be cycled reversibly at relatively low potential. An initial capacity of 250 mAh/g was measured, which is equivalent to the insertion of thirteen Li atoms per Li{sub 9+x}Fe{sub 7}(PO{sub 4}){sub 10} (x = 13) during the charge/discharge process (Fe{sup 2+} + 2e {yields} Fe{sup 0}). Furthermore, 2 shows a lower reduction potential (0.9 V), by approximately 200 mV, and much better electrochemical reversibility than iron(III) phosphate, FePO{sub 4}, highlighting the value of improving the ionic conductivity of the sample.

36 MATERIALS SCIENCE↗

COLD-START CHARACTERISTICS OF POLYMER ELECTROLYTE FUEL CELLS

In this paper, we investigate the electrochemical reaction kinetics, species transport, and solid water dynamics in a polymer electrolyte fuel cell (PEFC) during cold start. A simplified analysis is developed to enable the evaluation of the impact of ice volume fraction on cell performance during cold-start. Supporting neutron imaging data are also provided to reveal the real-time water evolution. Temperature-dependent voltage changes due to the reaction kinetics and ohmic loss are also analyzed based on the ionic conductivity of the membrane at subfreezing temperature. The analysis is valuable for the fundamental study of PEFC cold-start.

30 DIRECT ENERGY CONVERSION↗

Development of composite membranes of PVA-TEOS doped KOH for alkaline membrane fuel cell

Anion exchange membranes (AEMs) play an important role in separating fuel and oxygen (or air) in the Alkaline Membrane Fuel Cells. Preparation of hybrid organic inorganic materials of Polyvinylalcohol (PVA) - Tetraethylorthosilicate (TEOS) composite membrane doped KOH for direct alcohol alkaline fuel cell application has been investigated. The sol-gel method has been used to prepare the composite membrane of PVA-TEOS through crosslinking step and catalyzed by concentrated of hydrochloric acid. The gel solution was cast on the membrane plastic plate to obtain membrane sheets. The dry membranes were then doped by immersing in various concentrations of KOH solutions for about 4 hours. Investigations of the cross-linking process and the presence of hydroxyl group were conducted by FTIR as shown for frequency at about 1600 cm{sup −1} and 3300 cm{sup −1} respectively. The degree of swelling in ethanol decreased as the KOH concentration for membrane soaking process increased. The ion exchange capacity (IEC) of the membrane was 0.25meq/g. This composite membranes display significant ionic conductivity of 3.23 x 10{sup −2} S/cm in deionized water at room temperature. In addition, the morphology observation by scanning electron microscope (SEM) of the membrane indicates that soaking process of membrane in KOH increased thermal resistant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical conductivity of {gamma}-irradiated crystals of La{sub 0.95}Ba{sub 0.05}F{sub 2.95} superionic conductor

The electrical conductivity of single crystals of the La{sub 0.95}Ba{sub 0.05}F{sub 2.95} superionic conductor subjected to irradiation by {gamma} quanta (source {gamma}-{sup 60}Co, dose 2 Multiplication-Sign 10{sup 6} rad) has been investigated. It is shown that the radiation defects do not have a great effect on the ionic conductivity of nonstoichiometric La{sub 0.95}Ba{sub 0.05}F{sub 2.95} crystals, which is caused by the heterovalent replacements of La{sup 3+} cations with Ba{sup 2+} cations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Appearance of small polaron hopping conduction in iron modified cobalt lithium bismuth borate glasses

Lithium bismuth borate glasses containing different amounts of cobalt and iron oxides having chemical composition xFe{sub 2}O{sub 3}•(20-x)CoO•30Li{sub 2}O•10Bi{sub 2}O{sub 3}•40B{sub 2}O{sub 3} (x = 0, 5, 10, 15 and 20 mol% abbreviated as CFLBB1-5 respectively) prepared via melt quench technique have been investigated for their dc electrical conductivity. The amorphous nature of prepared glasses has been confirmed through X-ray diffraction measurements. The dc electrical conductivity has been analyzed by applying Mott’s small polaron hopping model. Activation energies corresponding to lower and higher temperature region have been evaluated. The iron ion concentration (N), mean spacing between iron ions (R) and polaron radius (R{sub p}) has been evaluated using the values of phonon radius (R{sub ph}) and Debye temperature (θ{sub D}). The glass sample without iron (CFLBB1) shows ionic conductivity but the incorporation of iron in the glass matrix results in the appearance of electronic conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear Polarization Effects in Dielectrics with Hydrogen Bonds

Using quasiclassical kinetic theory, nonlinear phenomena under the formation of space-charge polarization in crystals with hydrogen bonds (HBC) are investigated. From the solution of the nonlinear system of Fokker-Planck and Poisson equations with blocking electrodes, it is established that for the mathematical description of the relaxation polarization in HBCs in weak fields (100-1000 kV/m) and at high temperatures (T> 350 K), it is sufficient to use a linear approximation of perturbation theory. Theoretically, it was found that at the first odd frequency of the alternating field, nonlinear effects caused by the interaction of relaxation modes of various frequency orders start to appear. The diffusion and mobility coefficients are calculated taking into account both mechanisms of the protons transitions (thermally activated and tunneling transitions) through a parabolic potential barrier. A recurrence expression is constructed for calculating complex amplitudes of relaxation modes generated at an arbitrary frequency (multiple to the fundamental frequency) of the alternating field in an arbitrary approximation of perturbation theory. The proposed scheme for solving the kinetic equation can be applied to other crystals with ionic conductivity similar to HBCs in the type and properties of the crystal lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LTE-P-22 Alkaline Stability of AEMs

A procedure for ex-situ evaluation of chemical (alkaline) stability of anion exchange membranes (AEM). The IEC and ionic conductivity of an AEM is measured before and after being heated (typically at 80C in 1 M KOH) for ~1000 hours.

AEM↗

Ion transport in non-aqueous electrolyte mixtures of zinc chloride deep eutectic solvent (DES) and molecular solvents

For this work, the ion dynamics of null solvents 1ZnCl 2 :4EtG and 1ChCl:1ZnCl 2 :6EtG incorporating 1M water, propylene carbonate (PC) or acetonitrile (AcN) were investigated using 1 H NMR spectra and spin-lattice relaxation time (T 1 ) measurements combined with ionic conductivity, density, and viscosity, all as a function of temperature. Results show that the inclusion of all co-solvents increased the available free volume of the mixtures and followed the trend H 2 O ≤ PC < AcN. 1 H NMR spectra and T 1 inferred the presence of multiple ionic species with varying rates of mobilities. These dynamic heterogeneities were displayed by the broad T 1 minima – especially for the 1ZnCl 2 :4EtG mixtures – and asymmetrically broadened linewidths. T 1 results also revealed selective interaction sites between the hydrogen bond donors and acceptors, as well as with the co-solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural and electrical properties of PVA/PVP polymer blend films doped with cupric sulphate

A series of polyvinyl alcohol (PVA)/polyvinyl pyrrolidone (PVP) polymer blends added with different concentrations of cupric sulphate (CuSO{sub 4}) were prepared by solution casting method and were subjected to X-ray diffraction (XRD) and Ac conductance measurements. An attempt has been made to study the changes in crystal imperfection parameters in PVA/PVP blend films with the increase in concentration of CuSO{sub 4}. Results show that decrease in micro crystalline parameter values is accompanied with increase in the amorphous content in the film which is the reason for film to have more flexibility, biodegradability and good ionic conductivity. AC conductance measurements in these films show that the conductivity increases as the concentration of CuSO{sub 4} increases. These films were suitable for electro chemical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of novel nonflammable electrolytes in Sandia-built Li-ion cells.

Even after decades of research, Li-ion cells still lack thermal stability. A number of approaches, including adding fire retardants or fluoro compounds to the electrolyte to mitigate fire, have been investigated. These additives improved the thermal stability of the cells (only marginally) but not enough for use in transportation applications. Recent investigations indicate that hydrofluoro-ethers are promising as nonflammable additives1. We describe here the results of our studies on electrolytes containing the hydrofluoro-ethers in cells fabricated at Sandia. In particular, we are investigating two solvents as nonflammable additives. These are: (1) 2-trifluoromethyl-3-methoxyperfluoropentane {l_brace}TMMP{r_brace} and (2) 2-trifluoro-2-fluoro-3-difluoropropoxy-3-difluoro-4-fluoro-5-trifluoropentane {l_brace}TPTP{r_brace}. These electrolytes not only have good thermal stability compared to the conventional electrolytes but respectable ionic conductivity. Sandia made 18650 cells successfully completed the formational cycle. The impedance behavior is typical of Li-ion cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

What Can we Learn About Battery Materials from Their Magnetic Properties

Electrode materials for Li-ion batteries should combine electronic and ionic conductivity, structural integrity, and safe operation over thousands of lithium insertion and removal cycles. The quest for higher energy density calls for better understanding of the redox processes, charge and mass transfer occurring upon battery operation. A number of techniques have been used to characterize long-range and local structure, electronic and ionic transport in bulk of active materials and at interfaces, with an ongoing move toward in situ techniques determining the changes as they happen. This paper reviews several representative examples of using magnetic properties toward understanding of Li-ion battery materials with a notion to highlight the intimate connection between the magnetism, electronic and atomic structure of solids, and to demonstrate how this connection has been used to reveal the fine electronic and atomic details related to the electrochemical performance of the battery materials.

36 MATERIALS SCIENCE↗

Studies on two classes of positive electrode materials for lithium-ion batteries

The development of advanced lithium-ion batteries is key to the success of many technologies, and in particular, hybrid electric vehicles. In addition to finding materials with higher energy and power densities, improvements in other factors such as cost, toxicity, lifetime, and safety are also required. Lithium transition metal oxide and LiFePO 4 /C composite materials offer several distinct advantages in achieving many of these goals and are the focus of this report. Two series of layered lithium transition metal oxides, namely LiNi 1/3 Co 1/3-y M y Mn 1/3 O 2 (M=Al, Co, Fe, Ti) and LiNi 0.4 Co 0.2-y M y Mn 0.4 O 2 (M = Al, Co, Fe), have been synthesized. The effect of substitution on the crystal structure is related to shifts in transport properties and ultimately to the electrochemical performance. Partial aluminum substitution creates a high-rate positive electrode material capable of delivering twice the discharge capacity of unsubstituted materials. Iron substituted materials suffer from limited electrochemical performance and poor cycling stability due to the degradation of the layered structure. Titanium substitution creates a very high rate positive electrode material due to a decrease in the anti-site defect concentration. LiFePO 4 is a very promising electrode material but suffers from poor electronic and ionic conductivity. To overcome this, two new techniques have been developed to synthesize high performance LiFePO 4 /C composite materials. The use of graphitization catalysts in conjunction with pyromellitic acid leads to a highly graphitic carbon coating on the surface of LiFePO 4 particles. Under the proper conditions, the room temperature electronic conductivity can be improved by nearly five orders of magnitude over untreated materials. Using Raman spectroscopy, the improvement in conductivity and rate performance of such materials has been related to the underlying structure of the carbon films. The combustion synthesis of LiFePO 4 materials allows for the formation of nanoscale active material particles with high-quality carbon coatings in a quick and inexpensive fashion. The carbon coating is formed during the initial combustion process at temperatures that exceed the thermal stability limit of LiFePO 4 . The olivine structure is then formed after a brief calcination at lower temperatures in a controlled environment. The carbon coating produced in this manner has an improved graphitic character and results in superior electrochemical performance. The potential co-synthesis of conductive carbon entities, such as carbon nanotubes and fibers, is also briefly discussed.

25 ENERGY STORAGE↗

High-temperature X-ray analysis of phase evolution in lithium ion conductor Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3}

Series of Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3} glass ceramic samples were prepared in this work through the change of heat treatment temperature from 650 to 1050 °C. The structures of glass ceramic samples were characterized by means of high temperature X-ray diffraction and Field Emission Scanning Electron Microscope. And the lithium ionic conductivity was analyzed through AC impedance spectroscopy. Through heat treatment at 850 °C for 4 h for the base glass sample, we obtained a maximum conductivity of 5.8 × 10{sup −4} S/cm at room temperature. - Graphical Abstract: High temperature X-ray diffraction (HT-XRD) and Rietveld refinement of Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3} (LAGP) glass-ceramics were recorded to investigate the phase transformation, cell parameters and the mass fraction of each crystal phase, which occur in the glass to glass-ceramics process during different crystallization temperatures. The relationship between the average grain size and conductivity that originate from and relate to the crystallization temperature was analyzed by SEM micrograph and AC impedance spectroscopy. - Highlights: • Li{sub 1.5}Al{sub 0.5}Ge{sub 1.5}(PO{sub 4}){sub 3} glass-ceramics were prepared from as-prepared glass. • The phases decomposition and mass fraction of each phase were analyzed by HT-XRD. • Conductivity is relate to grain size that influenced by crystallization temperature.

36 MATERIALS SCIENCE↗

Novel Elastomeric Membranes Developed for Polymer Electrolytes in Lithium Batteries

Lithium-based polymer batteries for aerospace applications need to be highly conductive from -70 to 70 C. State-of-the-art polymer electrolytes are based on polyethylene oxide (PEO) because of the ability of its ether linkages to solvate lithium ions. Unfortunately, PEO has a tendency to form crystalline regions below 60 C, dramatically lowering conductivity below this temperature. PEO has acceptable ionic conductivities (10(exp -4) to 10(exp -3) S/cm) above 60 C, but it is not mechanically strong. The room-temperature conductivity of PEO can be increased by adding solvent or plasticizers, but this comes at the expense of thermal and mechanical stability. One of NASA Glenn Research Center s objectives in the Polymer Rechargeable System program (PERS) is to develop novel polymer electrolytes that are highly conductive at and below room temperature without added solvents or plasticizers.

Tigelaar, Dean M.↗

Cold-start characteristics of polymer electrolyte fuel cells

In this paper, we investigate the electrochemical reaction kinetics, species transport, and solid water dynamics in a polymer electrolyte fuel cell (PEFC) during cold start. A simplitied analysis is developed to enable the evaluation of the impact of ice volume fraction on cell performance during coldstart. Supporting neutron imaging data are also provided to reveal the real-time water evolution. Temperature-dependent voltage changes due to the reaction kinetics and ohmic loss are also analyzed based on the ionic conductivity of the membrane at subfreezing temperature. The analysis is valuable for the fundamental study of PEFC cold-start.

30 DIRECT ENERGY CONVERSION↗