Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

WAXS studies of the structural diversity of hemoglobin in solution.

Specific ligation states of hemoglobin are, when crystallized, capable of taking on multiple quaternary structures. The relationship between these structures, captured in crystal lattices, and hemoglobin structure in solution remains uncertain. Wide-angle X-ray solution scattering (WAXS) is a sensitive probe of protein structure in solution that can distinguish among similar structures and has the potential to contribute to these issues. We used WAXS to assess the relationships among the structures of human and bovine hemoglobins in different liganded forms in solution. WAXS data readily distinguished among the various forms of hemoglobins. WAXS patterns confirm some of the relationships among hemoglobin structures that have been defined through crystallography and NMR and extend others. For instance, methemoglobin A in solution is, as expected, nearly indistinguishable from HbCO A. Interestingly, for bovine hemoglobin, the differences between deoxy-Hb, methemoglobin and HbCO are smaller than the corresponding differences in human hemoglobin. WAXS data were also used to assess the spatial extent of structural fluctuations of various hemoglobins in solution. Dynamics has been implicated in allosteric control of hemoglobin, and increased dynamics has been associated with lowered oxygen affinity. Consistent with that notion, WAXS patterns indicate that deoxy-Hb A exhibits substantially larger structural fluctuations than HbCO A. Comparisons between the observed WAXS patterns and those predicted on the basis of atomic coordinate sets suggest that the structures of Hb in different liganded forms exhibit clear differences from known crystal structure.

59 BASIC BIOLOGICAL SCIENCES↗

A new tetragonal phase in CoFeCrGe Heusler alloy

Highlights: • CoFeCrGe ribbons were prepared. The ribbons annealed at 500 °C are composed of three compounds. • The primary compound is the L2{sub 1}-type with a = 0.571 nm and the B2 type with a = 0.286 nm in further disorder case. • The secondary compound has a cubic Cr{sub 3}Ge structure with a = 0.461 nm. • The tertiary compound is a new tetragonal structure with lattice parameters a = 0.76 nm, c = 0.284 nm. • The difference in the magnetic hysteresis loops of the samples annealed at 300 °C and 500 °C has been interpreted. - Abstract: CoFeCrGe ribbons were prepared by melt spinning and then annealed at 300 °C for 4 h and 500 °C for 4 h, respectively. The as-spun ribbons of CoFeCrGe have the B2 type structure with a = 0.287 nm. The CoFeCrGe ribbons annealed at 300 °C are composed mainly of the L2{sub 1} type structure with a = 0.578 nm in partial disorder and the B2 type structure with a = 0.289 nm in further disorder case. The ribbons annealed at 500 °C are composed of three compounds with average compositions of Co{sub 26.0}Fe{sub 26.5}Cr{sub 23.5}Ge{sub 24.0}, Co{sub 3.8}Fe{sub 6.4}Cr{sub 68.5}Ge{sub 21.3} and Co{sub 53.4}Fe{sub 30.4}Cr{sub 8.6}Ge{sub 7.6}, listed in a sequence of volume percentage from major to minor. The primary compound Co{sub 26.0}Fe{sub 26.5}Cr{sub 23.5}Ge{sub 24.0} is the L2{sub 1}-type structure with a = 0.571 nm in partial disorder and the B2 type structure with a = 0.286 nm in further disorder case. The secondary compound Co{sub 3.8}Fe{sub 6.4}Cr{sub 68.5}Ge{sub 21.3} has a cubic Cr{sub 3}Ge structure with a = 0.461 nm. The tertiary compound Co{sub 53.4}Fe{sub 30.4}Cr{sub 8.6}Ge{sub 7.6} is a new tetragonal structure with lattice parameters a = 0.76 nm, c = 0.284 nm, which were determined by using tilt-series electron diffraction technique in this work. The tertiary (Co, Fe)-rich phase is usually embedded in the matrix of the secondary Cr-rich phase, but there is no special orientation between the two phases. The difference in the magnetic hysteresis loops of the samples annealed at 300 °C and 500 °C has been interpreted as the appearance of the new tetragonal crystalline phase. Element doping is the possible way for further developing the single tetragonal phase or increasing the amount of this phase.

36 MATERIALS SCIENCE↗

Nanometer-Scale Correlations in Aqueous Salt Solutions

The intermediate-range (1–4 nm) correlation of cations, an- ions, and water in aqueous alkaline earth salt solutions is measured using synchrotron X-ray diffraction. We differentiate from the entire solution structure factor, S(Q), a separate region at low Q (<1 °A-1) containing local diffraction maxima (pre-peaks) that indicate nanometer-scale oscillatory behavior. These features are quantitatively reproduced with classical molecular dynamics simulations. At high concentrations, the pre-peaks emerge from correlations arising from existence of small quasi close-packed lattice- like structures comprised of cation hydration spheres. We also analyze the concentration dependence of the pre-peak and discuss the overall results in light of the rich literature dealing with intermediate-range correlations underlying universal phenomena in concentrated electrolytes. The authors were supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is operated by Battelle for the U.S. Department of Energy under Contract No. DE-AC05-76RL01830. Computing resources were generously allocated by PNNL's Institutional Computing program. DOE Contract No. DEAC02- 06CH11357 supports operation of the Advanced Photon Source at Argonne National Laboratory.

Chemical physics, nucleation, Madelung potential↗

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy

We report the room-temperature (RT) deformation behavior for two single-phase body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs), NbTaTiV and NbTaTiVZr, has been comprehensively investigated via in-situ neutron-diffraction experiments. Our work shows that the addition of Zr leads to the transition of mechanical response from ductile to brittle behavior. The results of lattice-strain evolutions obtained from in-situ neutron diffraction for the ductile NbTaTiV RHEA exhibit atypical plastic-deformation behavior, i.e., the reduced plasticanisotropic deformation, leading to an even distribution of the applied stress amongst the grains with different orientations rather than forming stress concentrations in {200}-oriented grains during plastic-deformation. Density functional theory (DFT) analysis shows that NbTaTiVZr has a lower electron density at the Fermi level, larger lattice distortion, and stronger charge transfer, as compared to NbTaTiV, suggesting higher strength and lower ductility in NbTaTiVZr, which are consistent with the current experimental results.

36 MATERIALS SCIENCE↗

Low-energy networks of the T-cage (H2O)(24) cluster and their use in constructing periodic unit cells of the structure I (sl) hydrate lattice

Hydrate networks are ‘host’ lattices for the storage of ‘guest’ natural gases. To enhance their physical stabilities near ambient conditions, the most stable clathrate hydrates should be identified. Here, we report the lowest energy networks of the tetrakaidecahedral cage (T-cage) (H2O)24 cluster, a constituent of the cubic unit cell of the structure I (sI) hydrate. A four-step screening method was employed to search for the lowest T-cage networks, which were eventually optimized at the MP2 level of theory. The obtained low-energy isomers can furthermore be used to obtain the low-energy hydrogen bonding networks of periodic structures of hydrates thus allowing for the realistic modeling of the accommodation of ‘guest’ molecules in clathrate hydrates. This work was supported by the US Department of Energy's Office of Basic Energy Sciences, Chemical Sciences program. Pacific Northwest National Laboratory is operated by Battelle for DOE.

08 HYDROGEN↗

Electronic structures of a diagonally striped lattice: Multiple ( N - 1 ) -fold degenerate flat bands

We investigate the electronic structure of an interesting two-dimensional (2D) diagonally striped lattice (DSL). It consists of arrays of N different types of “atoms” or “molecules” with a fixed sequence in both horizontal and vertical directions. Using a tight-binding model, we show that the DSL (N>2) has the symmetry group Amm2 and Pmm2, and exhibits an oscillatory metallic and insulating phases for the odd- and even- N number, respectively. Some conventional 2D lattices, such as the Lieb lattice, can be related to the derivative DSL via vacancy formation by removing one type of atom in every other (N-1) row of the original DSL. Interestingly, there are multiple (N-1)-fold degenerate flat bands in one group of the derivative DSLs, which affords a unique platform for studying many-body physics. In addition to atomic and molecular lattices, we suggest other artificial DSLs, such as photonic and phononic, to be also constructed with possibly interesting properties.

36 MATERIALS SCIENCE↗

The Crystal Structures of Some RM and RM2 Compounds (where R=rare earth metal and M=non-rare earth metal)

The non-cubic crystal structures of YIn, YPd and YAu are reported for the first time. YIn has the disordered tetragonal L1{sub 0} CuAu-type structure, and both YPd and YAu are isostructural with the orthorhombic B33 CrB -type structure. The lattice parameters for some C15 MgCu{sub 2}-type Laves phase (Tb{sub x}Dy{sub 1-x})Al{sub 2} alloys (x=0.25,0.50,0.75 and 1.0) have been measured and are found to vary linearly with composition between x=0.25 and 1.0.

36 MATERIALS SCIENCE↗

Electronic structure of the frustrated diamond lattice magnet NiRh 2 O 4

We report the A -site spinel NiRh 2 O 4 is the only known realization of a spin-1 diamond lattice magnet and is predicted to host unconventional magnetic phenomena driven by frustrated nearest and next-nearest neighbor exchange as well as orbital degeneracy. Previous works found no sign of magnetic order but found a gapped dispersive magnetic excitation indicating a possible valence bond magnetic ground state. However, the presence of many competing low energy degrees of freedom and limited empirical microscopic constraints complicates further analysis. Here we carry out resonant inelastic x-ray scattering (RIXS), x-ray absorption spectroscopy (XAS), and inelastic neutron scattering (INS) to characterize the local electronic structure and lattice dynamics of NiRh 2 O 4 . The RIXS data can be partly described by a single-ion model for tetrahedrally coordinated Ni 2+ and indicates a tetragonal distortion Δt 2 = 70 meV that splits the t 2 orbitals into a high energy orbital singlet and lower energy orbital doublet. We identify features of the RIXS spectra that are consistent with a Rh-Ni two-site excitation indicating strong metal-metal hybridization mediated by oxygen in NiRh 2 O 4 . We also identify signatures of electron-phonon coupling through the appearance of phonon sidebands that dress crystal field excitations. These results establish the key energy scales relevant to the magnetism in NiRh 2 O 4 and further demonstrate that covalency and lattice dynamics play essential roles in controlling the magnetic ground states of A -site spinels.

36 MATERIALS SCIENCE↗

Near single-crystalline, high-carrier-mobility silicon thin film on a polycrystalline/amorphous substrate

A template article including a base substrate including: (i) a base material selected from the group consisting of polycrystalline substrates and amorphous substrates, and (ii) at least one layer of a differing material upon the surface of the base material; and, a buffer material layer upon the base substrate, the buffer material layer characterized by: (a) low chemical reactivity with the base substrate, (b) stability at temperatures up to at least about 800.degree. C. under low vacuum conditions, and (c) a lattice crystal structure adapted for subsequent deposition of a semiconductor material; is provided, together with a semiconductor article including a base substrate including: (i) a base material selected from the group consisting of polycrystalline substrates and amorphous substrates, and (ii) at least one layer of a differing material upon the surface of the base material; and, a buffer material layer upon the base substrate, the buffer material layer characterized by: (a) low chemical reactivity with the base substrate, (b) stability at temperatures up to at least about 800.degree. C. under low vacuum conditions, and (c) a lattice crystal structure adapted for subsequent deposition of a semiconductor material, and, a top-layer of semiconductor material upon the buffer material layer.

36 MATERIALS SCIENCE↗

Structure determination of the 1918 H1N1 neuraminidase from a crystal with lattice-translocation defects

The structure of the 1918 H1N1 neuraminidase was determined to 1.65 Å from crystals with a lattice-translocation defect using uncorrected, as well as corrected, diffraction data. Few examples of macromolecular crystals containing lattice-translocation defects have been published in the literature. Lattice translocation and twinning are believed to be two common but different crystal-growth anomalies. While the successful use of twinned data for structure determination has become relatively routine in recent years, structure determination of crystals with lattice-translocation defects has not often been reported. To date, only four protein crystal structures containing such a crystal defect have been determined, using corrected, but not uncorrected, intensity data. In this report, the crystallization, structure determination and refinement of N1 neuraminidase derived from the 1918 H1N1 influenza virus (18NA) at 1.65 Å resolution are described. The crystal was indexed in space group C222{sub 1}, with unit-cell parameters a = 117.7, b = 138.5, c = 117.9 Å, and the structure was solved by molecular replacement. The lattice-translocation vector in the 18NA crystal was (0, 1/2, 1/2) or its equivalent vector (1/2, 0, 1/2) owing to the C lattice symmetry. Owing to this special lattice-translocation vector in space group C222{sub 1}, structure refinement could be achieved in two different ways: using corrected or uncorrected diffraction data. In the refinement with uncorrected data, a composite model was built to represent the molecules in the translated and untranslated layers, respectively. This composite structure model provided a unique example to examine how the molecules were arranged in the two lattice domains resulting from lattice-translocation defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An analytical study of double bend achromat lattice

In a double bend achromat, Chasman-Green (CG) lattice represents the basic structure for low emittance synchrotron radiation sources. In the basic structure of CG lattice single focussing quadrupole (QF) magnet is used to form an achromat. In this paper, this CG lattice is discussed and an analytical relation is presented, showing the limitation of basic CG lattice to provide the theoretical minimum beam emittance in achromatic condition. To satisfy theoretical minimum beam emittance parameters, achromat having two, three, and four quadrupole structures is presented. In this structure, different arrangements of QF and defocusing quadruple (QD) are used. An analytical approach assuming quadrupoles as thin lenses has been followed for studying these structures. A study of Indus-2 lattice in which QF-QD-QF configuration in the achromat part has been adopted is also presented.

43 PARTICLE ACCELERATORS↗

Experimental study of the proposed super-thermal-conductor: BAs

Recent calculations predict a super-thermal-conductivity of ~2000 Wm -1 K -1 , comparable to that of diamond, in cubic boron arsenide (BAs) crystals, which may offer inexpensive insulators with super-thermal-conductivity for microelectronic device applications. We have synthesized and characterized here single crystals of BAs with a zinc blende cubic structure and lattice parameters of a = 4.7830(7) Å. A relatively high thermal conductivity of ~200 Wm -1 K -1 is obtained, close to those of best non-carbon crystal insulators, such as SiC, although still an order of magnitude smaller than the value predicted. Based on our XPS, X-ray single crystal diffraction, and Raman scattering results, steps to achieve the predicted super-thermal conductivity in BAs are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Benchmark Testing of Superalloy Lattice Block Subelements Completed

Superalloy lattice block panels, which are produced directly by investment casting, are composed of thin ligaments arranged in three-dimensional triangulated trusslike structures (see the preceding figure). Optionally, solid panel face sheets can be formed integrally during casting. In either form, lattice block panels can easily be produced with weights less than 25 percent of the mass of a solid panel. Inconel 718 (IN 718) and MarM-247 superalloy lattice block panels have been developed under NASA's Ultra-Efficient Engine Technology Project and Higher Operating Temperature Propulsion Components Project to take advantage of the superalloys' high strength and elevated temperature capability with the inherent light weight and high stiffness of the lattice architecture (ref. 1). These characteristics are important in the future development of turbine engine components. Casting quality and structural efficiency were evaluated experimentally using small beam specimens machined from the cast and heat treated 140- by 300- by 11-mm panels. The matrix of specimens included samples of each superalloy in both open-celled and single-face-sheet configurations, machined from longitudinal, transverse, and diagonal panel orientations. Thirty-five beam subelements were tested in Glenn's Life Prediction Branch's material test machine at room temperature and 650 C under both static (see the following photograph) and cyclic load conditions. Surprisingly, test results exceeded initial linear elastic analytical predictions. This was likely a result of the formation of plastic hinges and redundancies inherent in lattice block geometry, which was not considered in the finite element models. The value of a single face sheet was demonstrated by increased bending moment capacity, where the face sheet simultaneously increased the gross section modulus and braced the compression ligaments against early buckling as seen in open-cell specimens. Preexisting flaws in specimens were not a discriminator in flexural, shear, or stiffness measurements, again because of redundant load paths available in the lattice block structure. Early test results are available in references 2 and 3; more complete analyses are scheduled for publication in 2004.

Source record↗

Exploration of lattice Hamiltonians for functional and structural discovery via Gaussian process-based exploration–exploitation

Statistical physics models ranging from simple lattice to complex quantum Hamiltonians are one of the mainstays of modern physics that have allowed both decades of scientific discovery and provided a universal framework to understand a broad range of phenomena from alloying to frustrated and phase separated materials to quantum systems. Traditionally, exploration of the phase diagrams corresponding to multidimensional parameter spaces of Hamiltonians was performed using a combination of basic physical principles, analytical approximations, and extensive numerical modeling. However, exploration of complex multidimensional parameter spaces is subject to the classic dimensionality problem, and the behaviors of interest concentrated on low dimensional manifolds remain undiscovered. Here, we demonstrate that a combination of exploration and exploration–exploitation with Gaussian process modeling and Bayesian optimization allows effective exploration of the parameter space for lattice Hamiltonians and effectively maps the regions at which specific macroscopic functionalities or local structures are maximized. We argue that this approach is general and can be further extended well beyond the lattice Hamiltonians to effectively explore the parameter space of more complex off-lattice and dynamic models.

42 ENGINEERING↗

Lattice Relaxations in Bixbyite‐Structured Rare‐Earth Sesquioxides

This report examines atomic relaxations in rare‐earth sesquioxides with the cubic bixbyite crystal structure. In particular, the experimentally determined unit cell atom positions in bixbyite compounds are compared to “ideal” bixbyite atom positions, where the concept of ideality is based on similarities between the bixbyite and fluorite crystal structures. Analyses indicate that all rare‐earth sesquioxide compounds deviate from ideality in similar ways and that there is a trend wherein the magnitudes of these atomic deviations decrease with increasing cationic size. The deviations from an ideal, fluorite‐like structure produce highly distorted coordination polyhedra and variations in metal‐oxygen bond lengths. A modified bond valence sum analysis revealed that the first nearest neighbor cation‐anion bond length variations lead to large (20%) variations in cation‐anion bond strength. This report also provides a qualitative analysis regarding the accuracy of atomic relaxed deviation parameters, based on x‐ray diffraction measurements. The analysis indicates that uncertainties in the accuracy of measured oxygen relaxed deviation parameters in bixbyite sesquioxides are likely much greater than the published uncertainties.

36 MATERIALS SCIENCE↗

Lattice and Local Electronic Structure Modulation Enables Ultra-Long-Life Li-Rich Cathode Materials

Effectively alleviating severe performance deterioration including rapid capacity decay and continuous voltage fading of Li-rich layered oxide (LLO) cathodes by suppressing the irreversible oxygen release and transition metal (TM) migration is a critical challenge during prolonged cycling. Herein, we report a Sb-doped LLO (SLLO) cathode with shortened TM oct –TM oct distance and modulated local electronic structure, which can significantly enhance the oxygen vacancy formation energy and TM migration energy barriers. Therefore, the SLLO cathode showcases an impressive energy density of 1052 Wh kg –1 at 0.2 C and an outstanding rate capability of 214 mAh g –1 at 5 C with a remarkable capacity retention of 79.2% even after 1000 cycles. It should be pointed out that it exhibits greatly enhanced voltage stability with an outstanding voltage retention of 86.2% after cycling 1600 times at 10 C. In conclusion, this work provides a prototype for significantly enhancing the reversibility in electrochemical reactions of high-capacity layered cathode materials.

25 ENERGY STORAGE↗