Search NASA⌕ Search

SEARCH · Search NASA

Results for “Launch Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Automated Medical Inventory System (AMIS) TechPort Entry

The current medical inventory paradigm on the International Space Station (ISS) requires crew to report use of medications and supplies to be manually decremented by ground teams. This method is not only tedious and time consuming for both the crew and ground teams but also results in inaccuracies in location and availability of medical supplies over time. Fortunately, the ISS is frequently resupplied by cargo launches and crew expeditions, and an accurate inventory count is less critical. However, for exploration missions, resupply will be greatly limited or unavailable entirely, and increasing communication latency will impair crew-ground communications. On longer missions, with large medical systems and time constrained crew, NASA needs a method of accurately managing medical inventory without reliance on ground teams and with as little crew time and effort as possible. The Exploration Medical Integrated Product Team (XMIPT) project called Medical Exploration Development and Implementation Scoping (MEDIScope) prepared a concept of operations and preliminary requirements for an Automated Medical Inventory System (AMIS) and completed a market survey and trade study of potential inventory management technologies in partnership with the market research firm, yet2. The products from the MEDIScope effort, including the market survey results, preliminary functional requirements and a concept of operations, have been handed off to a development team at Glenn Research Center (GRC) and ZIN Technologies for technology maturation. In the development phase, the AMIS team will finalize system requirements, down select technologies, integrate with a future exploration Crew Health and Performance Integrated Data Architecture, and conduct design reviews. The project will culminate in an ISS technical flight demonstration in FY27.

MEDIScope↗
NASA NTRS1971

Investigation of techniques for improving Saturn 5 RF tracking and ranging systems

Results of theoretical analyses of 12 problems are presented and comparisons of theoretical and experimental results are given. The investigations covered were: (1) techniques for improving the Saturn radar altimeter, (2) performance of the phase lock loop of the offset Doppler transponder, (3) signal processing equipment design for an orbital altitude radar return experiment, (4) spectral studies of signals present in the command and communication system (CCS) up-link transmitter, (5) intermodulation in the CCS down-link data demodulators, (6) error rate performance of the CCS transponder command demodulator, (7) flame attenuation effects on telemetry transmissions during Saturn launches, (8) design of a digital television system which converts a standard monochrome picture to a slow-scan picture, (9) methods of obtaining an additional CCS 72-kilobit/sec telemetry channel, (10) computation of the CCS S-band down-link spectra, (11) modeling of portions of the communications systems, and (12) modeling of a telemetry transmitter.

Walsh, J. R., Jr.↗
NASA NTRS1971

Shuttle operations, maintenance, and safety.

Review of a systematic search for practical solutions in the areas of space shuttle cryogenics, flight operations, ground operations, and safety. The insulation of the main-propulsion hydrogen tanks for both booster and orbiter to prevent water condensation is considered, as well as the insulation of the orbiter's orbital cryogen tanks for ground storage. Two approaches to the feeding of cryogens are outlined - namely, an approach depending on a periodic axial force to settle propellants and refill the basket, and a method of continuous feed through a capillary network adjacent to the walls throughout the tank, the latter method being independent of vehicle thrust. The development of reliable cryogen components is discussed, and the results of studies of launch-abort problems, shuttle approach and landing techniques, and the tolerance of ?deconditioned' crew and passengers to shuttle reentry g-loads are cited.

Beddingfield, S. T.↗
NASA NTRS1982

Method and apparatus for suppressing ignition overpressure in solid rocket propulsion systems

The transient overpressure wave produced upon ignition of a solid rocket booster is suppressed by providing within the launch platform, a plurality of pipes and spray heads disposed around the periphery of the exhaust gas plume near its upper end and spraying water into the upper end of the plume during ignition. A large amount of water, preferably equivalent in mass of exhaust products being ejected, is sprayed into the plume in a direction generally perpendicular to plume flow.

Guest, S. H.↗
NASA NTRS1990

Solar system exploration - Some thoughts on techniques and technologies

Some techniques and technologies for proposed interplanetary missions are described. Methods for reducing the effect of zero gravity on humans during missions to Mars and the moon, and the need for launch vehicles with increased lift capability are discussed. The use of nuclear power, liquid oxygen from the moon, and helium 3 as propellants for spacecraft is examined. The development and capabilities of the Shuttle Z vehicle are considered. Attention is given to the Space Station Freedom and Energia. A launch vehicle concept which utilizes the Shuttle Z for a mission to Mars is presented.

Bekey, Ivan↗
NASA NTRS1997

Nonstationary Transient Vibroacoustic Response of a Beam Structure

This study consists of an investigation into the nonstationary transient response of the Verification Test Article (VETA) when subjected to random acoustic excitation. The goal is to assess excitation models that can be used in the design of structures and equipment when knowledge of the structure and the excitation is limited. The VETA is an instrumented cantilever beam that was exposed to acoustic loading during five Space Shuttle launches. The VETA analytical structural model response is estimated using the direct averaged power spectral density and the normalized pressure spectra methods. The estimated responses are compared to the measured response of the VETA. These comparisons are discussed with a focus on prediction conservatism and current design practice.

Caimi, R. E.↗
NASA NTRS2000

Formation Flying In Highly Elliptical Orbits Initializing the Formation

In this paper several methods are examined for initializing formations in which all spacecraft start in a common elliptical orbit subsequent to separation from the launch vehicle. The tetrahedron formation used on missions such as the Magnetospheric Multiscale (MMS), Auroral Multiscale Midex (AMM), and Cluster is used as a test bed Such a formation provides full three degrees-of-freedom in the relative motion about the reference orbit and is germane to several missions. The type of maneuver strategy that can be employed depends on the specific initial conditions of each member of the formation. Single-impulse maneuvers based on a Gaussian variation-of-parameters (VOP) approach, while operationally simple and intuitively-based, work only in a limited sense for a special class of initial conditions. These 'tailored' initial conditions are characterized as having only a few of the Keplerian elements different from the reference orbit. Attempts to achieve more generic initial conditions exceed the capabilities of the single impulse VOP. For these cases, multiple-impulse implementations are always possible but are generally less intuitive than the single-impulse case. The four-impulse VOP formalism discussed by Schaub is examined but smaller delta-V costs are achieved in our test problem by optimizing a Lambert solution.

Mailhe, Laurie↗
NASA NTRS2001

Cryogenic Tank Structure Sizing With Structural Optimization Method

Structural optimization methods in MSC/NASTRAN are used to size substructures and to reduce the weight of a composite sandwich cryogenic tank for future launch vehicles. Because the feasible design space of this problem is non-convex, many local minima are found. This non-convex problem is investigated in detail by conducting a series of' analyses along a design line connecting two feasible designs. Strain constraint violations occur for some design points along the design line. Since MSC/NASTRAN uses gradient based optimization procedures, it does not guarantee that the lowest weight design can be found. In this study, a simple procedure is introduced to create a new starting point based on design variable values from previous optimization analyses. Optimization analysis using this new starting point can produce a lower weight design. Detailed inputs for setting up the MSC/NASTRAN optimization analysis and final tank design results are presented in this paper. Approaches for obtaining further weight reductions are also discussed.

Wang, J. T.↗
NASA NTRS2002

A Procedure for Structural Weight Estimation of Single Stage to Orbit Launch Vehicles (Interim User's Manual)

This is an interim user's manual for current procedures used in the Vehicle Analysis Branch at NASA Langley Research Center, Hampton, Virginia, for launch vehicle structural subsystem weight estimation based on finite element modeling and structural analysis. The process is intended to complement traditional methods of conceptual and early preliminary structural design such as the application of empirical weight estimation or application of classical engineering design equations and criteria on one dimensional "line" models. Functions of two commercially available software codes are coupled together. Vehicle modeling and analysis are done using SDRC/I-DEAS, and structural sizing is performed with the Collier Research Corp. HyperSizer program.

Martinovic, Zoran N.↗
NASA NTRS2009

Programs Automate Complex Operations Monitoring

Kennedy Space Center, just off the east coast of Florida on Merritt Island, has been the starting place of every human space flight in NASA s history. It is where the first Americans left Earth during Project Mercury, the terrestrial departure point of the lunar-bound Apollo astronauts, as well as the last solid ground many astronauts step foot on before beginning their long stays aboard the International Space Station. It will also be the starting point for future NASA missions to the Moon and Mars and temporary host of the new Ares series rockets designed to take us there. Since the first days of the early NASA missions, in order to keep up with the demands of the intricate and critical Space Program, the launch complex - host to the large Vehicle Assembly Building, two launch pads, and myriad support facilities - has grown increasingly complex to accommodate the sophisticated technologies needed to manage today s space missions. To handle the complicated launch coordination safely, NASA found ways to automate mission-critical applications, resulting in streamlined decision-making. One of these methods, management software called the Control Monitor Unit (CMU), created in conjunction with McDonnell Douglas Space & Defense Systems, has since left NASA, and is finding its way into additional applications.

Source record↗
NASA NTRS2010

Thermal Expansion of Vacuum Plasma Sprayed Coatings

Metallic Cu-8%Cr, Cu-26%Cr, Cu-8%Cr-1%Al, NiAl and NiCrAlY monolithic coatings were fabricated by vacuum plasma spray deposition processes for thermal expansion property measurements between 293 and 1223 K. The corrected thermal expansion, (DL/L(sub 0) varies with the absolute temperature, T, as (DL/L(sub 0) = A(T - 293)(sup 3) + BIT - 293)(sup 2) + C(T - 293) + D, where, A, B, C and D are thermal, regression constants. Excellent reproducibility was observed for all of the coatings except for data obtained on the Cu-8%Cr and Cu-26%Cr coatings in the first heat-up cycle, which deviated from those determined in the subsequent cycles. This deviation is attributed to the presence of residual stresses developed during the spraying of the coatings, which are relieved after the first heat-up cycle. In the cases of Cu-8%Cr and NiAl, the thermal expansion data were observed to be reproducible for three specimens. The linear expansion data for Cu-8% Cr and Cu-26%Cr agree extremely well with rule of mixture (ROM) predictions. Comparison of the data for the Cu-8%Cr coating with literature data for Cr and Cu revealed that the thermal expansion behavior of this alloy is determined by the Cu-rich matrix. The data for NiAl and NiCrAlY are in excellent agreement with published results irrespective of composition and the methods used for processing the materials. The implications of these results on coating GRCop-84 copper alloy combustor liners for reusable launch vehicles are discussed.

Raj, S V.↗
NASA NTRS2013

Estimating Foreign-Object-Debris Density from Photogrammetry Data

Within the first few seconds after launch of STS-124, debris traveling vertically near the vehicle was captured on two 16-mm film cameras surrounding the launch pad. One particular piece of debris caught the attention of engineers investigating the release of the flame trench fire bricks. The question to be answered was if the debris was a fire brick, and if it represented the first bricks that were ejected from the flame trench wall, or was the object one of the pieces of debris normally ejected from the vehicle during launch. If it was typical launch debris, such as SRB throat plug foam, why was it traveling vertically and parallel to the vehicle during launch, instead of following its normal trajectory, flying horizontally toward the north perimeter fence? By utilizing the Runge-Kutta integration method for velocity and the Verlet integration method for position, a method that suppresses trajectory computational instabilities due to noisy position data was obtained. This combination of integration methods provides a means to extract the best estimate of drag force and drag coefficient under the non-ideal conditions of limited position data. This integration strategy leads immediately to the best possible estimate of object density, within the constraints of unknown particle shape. These types of calculations do not exist in readily available off-the-shelf simulation software, especially where photogrammetry data is needed as an input.

Long, Jason↗
NASA NTRSDate not supplied

Open Innovation for a NASA Architecture Library

NASA’s Center of Excellence for Collaborative Innovation (CoECI) uses open innovation, or “crowdsourcing”, to access the global public to find ideas, concepts, designs, or solutions that meet a previously unmet need possibly resulting in significant advances in performance. The Center of Excellence for Collaborative Innovation was launched at the request of the White House Office of Science and Technology Policy. This is both a non-traditional method of innovation and a non-traditional method of outreach to the public to involve them in space technologies and programs. It has been used often for software development and new hardware technology. In this case we applied it to innovate with systems engineering tools for creating space architectures. The challenge was sponsored by NASA Engineering and Safety Center Systems Engineering Technical Fellow as part of a program for NASA’s adoption of MBSE. It was a trial to see if there would be as much participation or quality submissions with this more specialized topic and skill. The challenge sought space architecture representations and decompositions to create a library of modeled parts in a system modeling language (SysML). Mission architects mostly start from scratch to build model elements representing the functional and physical architecture of a system in SysML. There are a few beginning libraries, but these are also local to a program or group. A common library will save system engineers a large amount of time, will allow project stakeholders to recognize common graphics and quickly understand the architecture options. The challenge was promoted internationally, especially through professional organizations and universities with a systems engineering focus. It was open for 4 months, purposefully over the winter holiday break time to allow participants extra time outside of work or school. The challenge was designed so that expertise in space hardware was not necessary but getting to play with models of space architecture could provide motivation to participate. We did not receive as many entries as other broader outreach challenges, but the ones we received were extremely thorough and high quality. Solutions came from individuals and teams, students and professional consultants from the United States and Europe. We learned a few lessons about how to engage with the public and what characteristics of a problem result in good crowdsourcing results. The outreach challenge produced several useful ideas and modeled space elements, and the group will be engaging the winners to learn more about their new approaches.

innovation↗
NASA NTRSDate not supplied

Performance of the Four Bed Carbon Dioxide Scrubber ISS Technology Demonstration

The Four Bed Carbon Dioxide Scrubber technology demonstration is presently operating onboard the International Space Station after being launched in August of 2021and activated in October. This work describes the ground and flight performance of the 4BCO2 and the methods used to determine performance on the ISS where limited sensor data is available.

Life Support↗
NASA NTRS2011

Using Innovative Technologies for Manufacturing Rocket Engine Hardware

Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As the United States enters into the next space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, rapid manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on NASA s Space Launch System (SLS) upper stage engine, J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator (GG) discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using a workhorse gas generator (WHGG) test fixture at MSFC's East Test Area, the duct was subjected to extreme J-2X hot gas environments during 7 tests for a total of 537 seconds of hot-fire time. The duct underwent extensive post-test evaluation and showed no signs of degradation. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended.

Betts, E. M.↗
NASA NTRS1999

Probabilistic Structural Analysis Methods (PSAM) for Select Space Propulsion System Components

Probabilistic Structural Analysis Methods (PSAM) are described for the probabilistic structural analysis of engine components for current and future space propulsion systems. Components for these systems are subjected to stochastic thermomechanical launch loads. Uncertainties or randomness also occurs in material properties, structural geometry, and boundary conditions. Material property stochasticity, such as in modulus of elasticity or yield strength, exists in every structure and is a consequence of variations in material composition and manufacturing processes. Procedures are outlined for computing the probabilistic structural response or reliability of the structural components. The response variables include static or dynamic deflections, strains, and stresses at one or several locations, natural frequencies, fatigue or creep life, etc. Sample cases illustrates how the PSAM methods and codes simulate input uncertainties and compute probabilistic response or reliability using a finite element model with probabilistic methods.

Source record↗
NASA NTRS2015

Effect of Coversheet Materials on the Acoustic Performance of Melamine Foam

Melamine foam is a highly absorptive material that is often used inside the payload fairing walls of a launch vehicle. This foam reduces the acoustic excitation environment that the spacecraft experiences during launch. Often, the melamine foam is enclosed by thin coversheet materials for contamination protection, thermal protection, and electrostatic discharge control. Previous limited acoustic testing by NASA Glenn Research Center has shown that the presence of a coversheet material on the melamine foam can have a significant impact on the absorption coefficient and the transmission loss. As a result of this preliminary finding a more extensive acoustic test program using several different coversheet materials on melamine foam was performed. Those test results are summarized in this paper. Additionally, a method is provided to use the acoustic absorption and transmission loss data obtained from panel level testing to predict their combined effect for the noise reduction of a launch vehicle payload fairing.

Acoustics↗
NASA NTRS2015

Development of an Aerodynamic Analysis Method and Database for the SLS Service Module Panel Jettison Event Utilizing Inviscid CFD and MATLAB

This paper describes the development, testing, and utilization of an aerodynamic force and moment database for the Space Launch System (SLS) Service Module (SM) panel jettison event. The database is a combination of inviscid Computational Fluid Dynamic (CFD) data and MATLAB code written to query the data at input values of vehicle/SM panel parameters and return the aerodynamic force and moment coefficients of the panels as they are jettisoned from the vehicle. The database encompasses over 5000 CFD simulations with the panels either in the initial stages of separation where they are hinged to the vehicle, in close proximity to the vehicle, or far enough from the vehicle that body interference effects are neglected. A series of viscous CFD check cases were performed to assess the accuracy of the Euler solutions for this class of problem and good agreement was obtained. The ultimate goal of the panel jettison database was to create a tool that could be coupled with any 6-Degree-Of-Freedom (DOF) dynamics model to rapidly predict SM panel separation from the SLS vehicle in a quasi-unsteady manner. Results are presented for panel jettison simulations that utilize the database at various SLS flight conditions. These results compare favorably to an approach that directly couples a 6-DOF model with the Cart3D Euler flow solver and obtains solutions for the panels at exact locations. This paper demonstrates a method of using inviscid CFD simulations coupled with a 6-DOF model that provides adequate fidelity to capture the physics of this complex multiple moving-body panel separation event.

Applebaum, Michael P.↗