Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Metal-insulator-semiconductor barriers with a nanometer-thick aluminum nitride insulator on p-type silicon

The state of the interface between p-silicon and a nanometer-thick insulator is analyzed. DLTS spectra, obtained with deep centers in the bulk of the structure and its surface states recharged, are examined. The nature of the noise as a function of the reverse bias is determined for evaluating the possibility of using the structure as a nuclear radiation detector. A conclusion is drawn that the barrier used in the structure has a higher quality when nanometer-thick aluminum nitride films are deposited by dc, rather than ac, magnetron sputtering.

36 MATERIALS SCIENCE↗

Optical transparency and electrical conductivity of nonstoichiometric ultrathin In{sub x}O{sub y} films

The effect of thickness and composition on the electrical conductivity and optical transparency, mainly in the infrared, of ultrathin In{sub x}O{sub y} films was studied. In{sub x}O{sub y} films 35-470 A thick with oxygen atomic fractions of {approx}0.3 and {approx}0.5 were prepared via dc magnetron sputtering. All films were polycrystalline, consisting of only the cubic bixbiyte phase of In{sub 2}O{sub 3}. The average grain size of the films increased from 30 to 95 nm as the film thickness increased. The weak dependence of the electrical conductivity on the frequency and the low activation energies for conduction, a few hundredths of an eV, provided an indication that free band conduction was the primary electrical conduction mechanism in the case of all ultrathin In{sub x}O{sub y} films. It was found that introducing a high degree of nonstoichiometry in the form of oxygen deficiency did not help improve the electrical conductivity, since not all vacancies contributed two free electrons for conduction and due to impurity scattering. The optical nature of these films, studied mainly by ellipsometry, was found to be dependent on the film's composition and thickness. In the infrared, the dielectric function of all In{sub x}O{sub y} films was consistent with the Drude model, inferring that the transparency loss in this region was a result of free charge carriers. In the visible however, In{sub x}O{sub y} films under 170 A, which had an oxygen atomic fraction of {approx}0.5, were modeled by extending the Drude model to the shorter wavelengths. Films over 170 A, with the same composition, were modeled using the Cauchy dispersion model, meaning that no absorption was measured. These results indicate that, optically, under specific compositions, ultrathin In{sub x}O{sub y} films undergo a transition from metalliclike behavior to dielectric behavior with increasing film thickness. Using a figure of merit approach, it was determined that a nonstoichiometric 230 A thick In{sub x}O{sub y} film, with an oxygen atomic fraction of {approx}0.3, had the best combination of conductivity and transparency, namely, absorption of less than 20% in the infrared, about 10% in the visible, and electrical resistance of only 230 {Omega} at 20 kHz. Such a film may be classified as a highly conductive transparent oxide even in the infrared.

36 MATERIALS SCIENCE↗

Technique for the Formation of Antireflection Coatings Based on ITO Films

A technique for forming transparent conducting indium-tin-oxide films for applications, which require high current densities, are considered. These films have to combine a good surface conductivity with an increased transmittance of radiation within a wide wavelength range. A two-stage process is designed to fabricate such coatings: at the first stage, a dense indium-tin-oxide film with high electrical conductivity is formed; then, an additional antireflection layer of the same material is deposited. Possible methods for optimizing these additional indium-tin-oxide films obtained by forming nanostructured self-assembled coatings on the surface of dense films are investigated. It is shown that the best light extraction over a wide wavelength range is provided by the composite film-deposition technique, which consists in the deposition of self-assembled nanostructured coatings by electron-beam evaporation on a hot substrate and the further filling of voids by magnetron sputtering at room temperature. Since the optical properties of the obtained antireflection coatings depend on the mass ratio of materials deposited at each stage, the technique makes it possible to optimize the film properties on the basis of problems specified by the area of their application. Computer simulation of the behavior of the material distribution in the structure of the studied coatings confirms the ability of the method of combined film deposition to form the smoothest character of the change in the effective refractive index of the coating structure, which leads to the most efficient extraction of optical-range light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of spin-asymmetry by L2{sub 1}-ordering in Co{sub 2}MnSi/Cr/Co{sub 2}MnSi current-perpendicular-to-plane magnetoresistance devices

Co{sub 2}MnSi/Cr/Co{sub 2}MnSi (001)-fully epitaxial current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) devices were fabricated via an UHV magnetron sputtering system. The relationship between the degree of chemical ordering in Co{sub 2}MnSi (CMS) and the CPP-GMR characteristics was investigated systematically against the annealing temperature of the devices. X-ray diffraction profiles and reflection high-energy electron diffraction images indicated that annealing improved L2{sub 1}-ordering. The MR ratio also increased upon annealing and the maximum MR ratio of 5.2% and {delta}RA of 6.5 m{omega} {mu}m{sup 2} were achieved by annealing at 400 deg. C. These results indicate that promoting the degree of L2{sub 1}-ordering in CMS enhances the bulk and/or interface spin-asymmetry coefficients.

36 MATERIALS SCIENCE↗

Momentum transfer driven textural changes of CeO{sub 2} thin films

The influence of the target erosion depth on the film texture was investigated during DC reactive magnetron sputter deposition of CeO{sub 2} thin films. Three fluxes towards the substrate surface (the relative negative oxygen ion flux, the material flux, and the energy flux) were measured and related to the ongoing erosion of a cerium target. As the deposition rate increased for more eroded targets, both the energy flux and the negative ion flux decreased. Cerium oxide thin films that were deposited at different target erosion states, exhibited a change in preferential crystalline orientation from [200] to [111]. This textural change cannot be explained in terms of the energy per arriving atom concept. Instead, it is shown that the momentum of the high energetic negative ions is an essential condition to clarify the witnessed trends.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Permeability Ternary Palladium Alloy Membranes with Improved Sulfur and Halide Tolerances

The project team consisting of Southwest Research Institute{reg_sign} (SwRI{reg_sign}), Georgia Institute of Technology (GT), the Colorado School of Mines (CSM), TDA Research, and IdaTech LLC was focused on developing a robust, poison-tolerant, hydrogen selective free standing membrane to produce clean hydrogen. The project completed on schedule and on budget with SwRI, GT, CSM, TDA and IdaTech all operating independently and concurrently. GT has developed a robust platform for performing extensive DFT calculations for H in bulk palladium (Pd), binary alloys, and ternary alloys of Pd. Binary alloys investigated included Pd96M4 where M = Li, Na, Mg, Al, Si, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Y, Zr, Nb, Mo, Tc, Ru, Rh, Ag, Cd, In, Sn, Sb, Te, Hf, Ta, W, Re, Os, Ir, Pt, Au, Tl, Pb, Bi, Ce, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu. They have also performed a series of calculations on Pd{sub 70}Cu{sub 26}Ag{sub 4}, Pd{sub 70}Cu{sub 26}Au{sub 4}, Pd{sub 70}Cu{sub 26}Ni{sub 4}, Pd{sub 70}Cu{sub 26}Pt{sub 4}, and Pd{sub 70}Cu{sub 26}Y{sub 4}. SwRI deposited and released over 160 foils of binary and ternary Pd alloys. There was considerable work on characterizing and improving the durability of the deposited foils using new alloy compositions, post annealing and ion bombardment. The 10 and 25 {micro}m thick films were sent to CSM, TDA and IdaTech for characterization and permeation testing. CSM conducted over 60 pure gas permeation tests with SwRI binary and ternary alloy membranes. To date the PdAu and PdAuPt membranes have exhibited the best performance at temperatures in the range of 423-773 C and their performance correlates well with the predictions from GT. TDA completed testing under the Department of Energy (DOE) WGS conditions on over 16 membranes. Of particular interest are the PdAuPt alloys that exhibited only a 20% drop in flux when sulfur was added to the gas mixture and the flux was completely recovered when the sulfur flow was stopped. IdaTech tested binary and ternary membranes on a simulated flue gas stream and experienced significant difficulty in mounting and testing the sputter deposited membranes. IdaTech was able to successfully test PdAu and PdAuPt membranes and saw similar sulfur tolerance to what TDA found. The Program met all the deliverables on schedule and on budget. Over ten presentations at national and international conferences were made, four papers were published (two in progress) in technical journals, and three students (2 at GT and 1 at CSM) completed their doctorates using results generated during the course of the program. The three major findings of program were; (1) the DFT modeling was verified as a predictive tool for the permeability of Pd based ternary alloys, (2) while magnetron sputtering is useful in precisely fabricating binary and ternary alloys, the mechanical durability of membranes fabricated using this technique are inferior compared to cold rolled membranes and this preparation method is currently not ready for industrial environments, (3) based on both modeling and experimental verification in pure gas and mixed gas environments PdAu and PdAuPt alloys were found to have the combination of the highest permeability and tolerance to sulfur.

08 HYDROGEN↗

Ion-beam assisted sputtering of titanium nitride thin films

Abstract Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. This work aims to explore effects in ion beam-assisted sputtering (IBAS), were an observed increase in nominal critical temperature and upper critical fields are in tandem with previous work on Niobium nitride (NbN). We grow thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method, to compare their superconducting critical temperatures $$T_{c}$$ T c as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and x-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting $$T_c$$ T c in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting $$T_c$$ T c due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

36 MATERIALS SCIENCE↗

Properties of Lithium Phosphorus Oxynitride (Lipon) for 3D Solid-State Lithium Batteries

Abstract The thin film electrolyte known as Lipon has proven successful for planar thin film battery applications. Here the sputter deposition of the amorphous lithium phosphorous oxynitride electrolyte onto more complex 3D structures is examined. The 3D structures include off-axis alignment of planar substrates and also 10-100 m arrays of pores, columns and grooves. For magnetron sputtering in N2 gas at 2.6 Pa, the Lipon film deposition is not restricted by the line-of-sight to the target, but forms conformal and dense films over the 3D and off-axis substrates. The deposition rate decreases for areas and grooves that are less accessible for the sputtered flux. The composition varies, but remains within the range that gives sufficient Li+ ionic conductivity, 2 1 S/cm

25 ENERGY STORAGE↗

Nanostructured ITO/SiO{sub 2} Coatings

The influence of a SiO{sub 2} layer deposited onto nanostructured transparent conductive films of indium and tin oxide (ITO) on their optical characteristics is investigated. For this purpose, SiO{sub 2} films of various thicknesses are deposited by magnetron sputtering on samples with ITO films containing whiskers of preferentially vertical orientation and possessing steadily decreasing reflectance. It is shown that this makes it possible to attain noticeable coating antireflection under the condition of the uniform overgrowth of ITO whiskers by the SiO{sub 2} layer. The influence of the SiO{sub 2} layer on the optical characteristics of a dense unstructured ITO film is also investigated. The results for structured and unstructured ITO/SiO{sub 2} coatings with identical material mass contents are compared. It is noted that due to the liability of ITO material to degradation during operation in the composition of transparent conductive contacts, the results can also be interesting for the formation of coatings more resistant to the effect of the environment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transparent conductive and near-infrared reflective Ga-doped ZnO/Cu bilayer films grown at room temperature

Bilayer films consisting of Ga-doped ZnO (GZO) and Cu layers were grown at room temperature by magnetron sputtering. The structural, electrical, and optical properties of GZO/Cu bilayer films were investigated in detail. The crystallinity and transparent-conductive properties of the films were correlated with the Cu layer thickness. The GZO/Cu bilayer film with the Cu layer thickness of 7.8 nm exhibited a low resistivity of 7.6x10{sup -5} {Omega} cm and an average visible transmittance of 74%. The reflectance was up to 65% in the near-infrared region for this film. The transparent conductive and near-infrared reflective GZO/Cu bilayer films could be readily deposited at room temperature. The GZO/Cu bilayer films were thermally stable when annealed at temperatures as high as 500 deg. C.

36 MATERIALS SCIENCE↗

Use of double-layer ITO films in reflective contacts for blue and near-UV LEDs

The structural and optical properties of multilayer ITO/SiO{sub 2}/Ag composites are studied. In these composites, the ITO (indium-tin oxide) layer is produced by two different methods: electron-beam evaporation and a combined method including electron-beam evaporation and subsequent magnetron sputtering. It is shown that the reflectance of the composite based on the ITO film produced by electron-beam evaporation is substantially lower. This can be attributed to the strong absorption of light at both boundaries of the SiO{sub 2} layer, which results from the complex surface profile of ITO films deposited by electron-beam evaporation. Samples with a film deposited by the combined method have a reflectance of about 90% at normal light incidence, which, combined with their higher electrical conductivity, makes these samples advantageous for use as reflective contacts to the p-type region of AlInGaN light-emitting diodes of the flip-chip design.

36 MATERIALS SCIENCE↗

Atomistic surface erosion and thin film growth modelled over realistic time scales

We present results of atomistic modelling of surface growth and sputtering using a multi-time scale molecular dynamics-on-the-fly kinetic Monte Carlo scheme which allows simulations to be carried out over realistic experimental times. The method uses molecular dynamics to model the fast processes and then calculates the diffusion barriers for the slow processes on-the-fly, without any preconceptions about what transitions might occur. The method is applied to the growth of metal and oxide materials at impact energies typical for both vapour deposition and magnetron sputtering. The method can be used to explain growth processes, such as the filling of vacancies and the formation of stacking faults. By tuning the variable experimental parameters on the computer, a parameter set for optimum crystalline growth can be determined. The method can also be used to model sputtering where the particle interactions with the surface occur at a higher energy. It is shown how a steady state can arise in which interstitial clusters are continuously being formed below the surface during an atom impact event which also recombine or diffuse to the surface between impact events. For fcc metals the near surface region remains basically crystalline during the erosion process with a pitted topography which soon attains a steady state roughness.

36 MATERIALS SCIENCE↗

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

We report on the performance, structure and stability of periodic multilayer films containing silicon carbide (SiC) and aluminum (Al) layers designed for use as reflective coatings in the extreme ultraviolet (EUV). We find that SiC/Al multilayers prepared by magnetron sputtering have low stress, good temporal and thermal stability, and provide good performance in the EUV, particularly for applications requiring a narrow spectral bandpass, such as monochromatic solar imaging. Transmission electron microscopy reveals amorphous SiC layers and polycrystalline Al layers having a strong <111> texture, and relatively large roughness associated with the Al crystallites. Fits to EUV reflectance measurements also indicate large interface widths, consistent with the electron microscopy results. SiC/Al multilayers deposited by reactive sputtering with nitrogen comprise Al layers that are nearly amorphous and considerably smoother than films deposited nonreactively, but no improvements in EUV reflectance were obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytical model of electron transport in polycrystalline, degenerately doped ZnO films

An analytical description of the charge carrier transport, valid for non-degenerated and degenerated semiconductors, was developed, critically reviewed, and fitted to the temperature-dependent Hall mobility data of magnetron sputtered, degenerately doped ZnO:Al films. Our extended model for grain boundary scattering in semiconductors of arbitrary degeneracy is based on previous models from literature and suitable to describe the Hall mobility of the carriers as a function of the free carrier concentration and the temperature at the same time. It is mathematically simple enough for a fast fit procedure, which is not possible with most of the previous models. Applying a combined transport model consisting of ionized impurity scattering, phonon scattering, and grain boundary scattering in degenerate semiconductors, we were able to determine the trap density at the grain boundaries Nₜ ≈ 3×10¹³ to 5×10¹³cm⁻² and the deformation potential E{sub ac} in the range of 5 eV to 9 eV depending on the details of the transport model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled Growth of Ta Oxide With Reactive Sputtering for Overlap Josephson Junction Application

Josephson junctions $\($JJs$\)$ are indispensable elements for superconducting quantum electronics. There is a growing need to develop processes for high quality JJs. Here we explore the growth of Ta oxide as a dielectric barrier for Metal-Oxide-Metal overlap JJ implementations. We study films of Ta oxides prepared with reactive magnetron sputtering. TaOx is grown on silicon and Ta films with varying RF power and oxygen concentrations. Tuning these parameters allows us to control the rate of deposition as well as composition of polycrystalline Ta oxides needed to meet our dielectric requirements for Josephson Junctions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Material of Metal Sublayer and Deposition Configuration on the Texture Formation in the Piezoactive ZnO Films

Effect of material of metal sublayer (aluminum, vanadium, chromium, iron, cobalt, nickel, and copper) and deposition configuration on the formation of the oblique and straight texture in the ZnO films is studied. The films that are synthesized in a dc magnetron sputtering system. It is shown that the piezoactive ZnO films with oblique texture that can generate shear waves are formed on the Cr and V metal sublayers in the shifted deposition configuration when the substrate is shifted relative to the magnetron axis toward the region of the target erosion. The piezoactive ZnO films with the straight structure that can generate longitudinal waves are formed on a chemically pure Al sublayer in the symmetric deposition configuration when the substrate is centered with respect to the target. Changes of the sublayer material in both deposition configurations or preliminary oxidation of the sublayer lead to the formation of the piezoactive ZnO films with mixed texture that excite shear and longitudinal waves. Chemical etching is used to show that the ZnO films with the oblique and straight textures exhibit piezoactive properties and can generate hypersound at thicknesses of no less than about 0.3 and about 0.9 μm, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting properties and chemical composition of NbTiN thin films with different thickness

In this research, we systematically investigated the superconducting properties and chemical composition of NbTiN thin films prepared on single-crystal MgO substrates. The NbTiN thin films with different thicknesses (4–100 nm) were deposited by reactive DC magnetron sputtering at ambient temperature. We measured and analyzed the crystal structure and thickness dependence of the chemical composition using X-ray diffraction and X-ray photoelectron spectroscopy depth profiles. The films exhibited excellent superconducting properties, with a high superconducting critical temperature of 10.1 K, low resistivity (ρ{sub 20} = 93 μΩ cm), and residual resistivity ratio of 1.12 achieved for 4-nm-thick ultrathin NbTiN films prepared at the deposition current of 2.4 A. The stoichiometry and electrical properties of the films varied gradually between the initial and upper layers. A minimum ρ{sub 20} of 78 μΩ cm and a maximum residual resistivity ratio of 1.15 were observed for 12-nm-thick films, which significantly differ from the properties of NbN films with the same NaCl structure.

36 MATERIALS SCIENCE↗

Comparison of Mg-based multilayers for solar He II radiation at 30.4 nm wavelength

Mg-based multilayers, including SiC/Mg, Co/Mg, B4C/Mg, and Si/Mg, are investigated for solar imaging and a He II calibration lamp at a 30.4 nm wavelength. These multilayers were fabricated by a magnetron sputtering method and characterized by x-ray reflection. The reflectivities of these multilayers were measured by synchrotron radiation. Near-normal-incidence reflectivities of Co/Mg and SiC/Mg multilayer mirrors are as high as 40.3% and 44.6%, respectively, while those of B4C/Mg and Si/Mg mirrors are too low for application. The measured results suggest that SiC/Mg, Co/Mg multilayers are promising for a 30.4 nm wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗