Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mode Mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dedicated beam position monitor pair for model-independent lattice characterization at NSLS-II

This paper reports recent lattice characterization results obtained at the National Synchrotron Light Source II (NSLS-II) storage ring, conducted without reliance on a lattice model. A pair of beam position monitors (BPMs) with bunch-by-bunch (B$\times$B) resolution, were recently installed in a section of the storage ring free of magnetic fields. The new BPM pair measured the beam, or bunch’s transverse Poincaré map precisely after the beam was excited. Linear one-turn-matrices (OTM) were then derived, and from these, the 4-dimensional coupled Twiss parameters were extracted at the locations of the BPM pair. By normalizing beam oscillation amplitudes with the Twiss parameters, the global action-variables were obtained. Additionally, these action-variables facilitated the measurement of the local Twiss parameters observed by other BPMs independent on lattice model. This method is general, and particularly useful in certain scenarios such as a round beam mode in a diffraction-limited light source ring. We applied it to assess both weakly and strongly coupled lattices at the NSLS-II ring. Through analysis of the strongly coupled lattice, the quadrupole tilt errors were estimated to be less than 400 μrad. Utilizing the BPMs’ B$\times$B resolution, for the first time we observed the variations of the linear lattice along a long bunch-train.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Topological phases and bulk-edge correspondence of magnetized cold plasmas

Abstract Plasmas have been recently studied as topological materials. However, a comprehensive picture of topological phases and topological phase transitions in cold magnetized plasmas is still missing. Here we systematically map out all the topological phases and establish the bulk-edge correspondence in cold magnetized plasmas. We find that for the linear eigenmodes, there are 10 topological phases in the parameter space of density n , magnetic field B , and parallel wavenumber k z , separated by the surfaces of Langmuir wave-L wave resonance, Langmuir wave-cyclotron wave resonance, and zero magnetic field. For fixed B and k z , only the phase transition at the Langmuir wave-cyclotron wave resonance corresponds to edge modes. A sufficient and necessary condition for the existence of this type of edge modes is given and verified by numerical solutions. We demonstrate that edge modes exist not only on a plasma-vacuum interface but also on more general plasma-plasma interfaces. This finding broadens the possible applications of these exotic excitations in space and laboratory plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2008

Evaluating Mars Science Laboratory Landing Sites with the Mars Global Reference Atmospheric Model (Mars-GRAM 2005)

The Mars Global Reference Atmospheric Model (Mars-GRAM) is an engineering-level atmospheric model widely used for diverse mission applications. Mars-GRAM s perturbation modeling capability is commonly used, in a Monte-Carlo mode, to perform high fidelity engineering end-to-end simulations for entry, descent, and landing (EDL) [1]. From the surface to 80 km altitude, Mars-GRAM is based on the NASA Ames Mars General Circulation Model (MGCM). Mars-GRAM and MGCM use surface topography from Mars Global Surveyor Mars Orbiter Laser Altimeter (MOLA), with altitudes referenced to the MOLA areoid, or constant potential surface. Traditional Mars-GRAM options for representing the mean atmosphere along entry corridors include: (1) Thermal Emission Spectrometer (TES) mapping years 1 and 2, with Mars-GRAM data coming from NASA Ames Mars General Circulation Model (MGCM) results driven by observed TES dust optical depth or (2) TES mapping year 0, with user-controlled dust optical depth and Mars-GRAM data interpolated from MGCM model results driven by selected values of globally-uniform dust optical depth. Mars-GRAM 2005 has been validated [2] against Radio Science data, and both nadir and limb data from TES [3]. There are several new features included in Mars-GRAM 2005. The first is the option to use input data sets from MGCM model runs that were designed to closely simulate conditions observed during the first two years of TES observations at Mars. The TES Year 1 option includes values from April 1999 through January 2001. The TES Year 2 option includes values from February 2001 through December 2002. The second new feature is the option to read and use any auxiliary profile of temperature and density versus altitude. In exercising the auxiliary profile Mars-GRAM option, values from the auxiliary profile replace data from the original MGCM databases. Some examples of auxiliary profiles include data from TES nadir or limb observations and Mars mesoscale model output at a particular location and time. The final new feature is the addition of two Mars-GRAM parameters that allow standard deviations of Mars-GRAM perturbations to be adjusted. The parameter rpscale can be used to scale density perturbations up or down while rwscale can be used to scale wind perturbations.

Justh, H. L.↗
DOE OSTI2023

Chapter 6: Abuse Response of Batteries Subjected to Mechanical Impact

Electrochemical and thermal models to simulate nominal performance and abuse response of lithium-ion cells and batteries have been reported widely in the literature. Studies on mechanical failure of cell components and how such events interact with the electrochemical and thermal response are relatively less common. This chapter outlines a framework developed under the Computer Aided Engineering for Batteries program to couple failure modes resulting from external mechanical loading to the onset and propagation of electrochemical and thermal events that follow. Starting with a scalable approach to implement failure criteria based on thermal, mechanical, and electrochemical thresholds, we highlight the practical importance of these models using case studies at the cell and module level. The chapter also highlights a few gaps in our understanding of the comprehensive response of batteries subjected to mechanical crash events, the stochastic nature of some of these failure events, and our approach to build safety maps that help improve robustness of battery design by capturing the sensitivity of some key design parameters to heat generation rates under different mitigation strategies.

abuse simulations↗
DOE OSTI2025

OpenCRUMS USA: An Open Machine Learning Framework for Characterizing Variability in Aerosol Reanalysis Data

Advances in artificial intelligence (AI) have called for exploring how these techniques can be used for exploring patterns in large climate datasets. To that regard, the U.S. Department of Energy AI for Earth System Predictability (AI4ESP) supported a pilot initiative called the Open Classification of Regimes in the Southeast USA (OpenCRUMS USA) project to explore how AI can be used to characterize modes of spatial variability in large climate datasets. For this study, we focus on comparing two methods for characterizing the modes of spatial variability of surface aerosol concentration over the Houston region: empirical orthogonal functions (EOFs) and layerwise relevance propagation (LRP) applied to a convolutional neural network (CNN) classifier. We show that EOF analysis typically attributes spatial variability modes that span all of southeast Texas, prohibiting the attribution of spatial variability to localized regions. However, using LRP on the CNN classifier resolves the explanatory parameters at a finer spatial resolution than EOFs. This allows for the attribution of the spatial variability of surface aerosols to local regions of organic carbon which was not possible using EOFs. In addition, the LRP analysis also suggests that synoptic-scale transport of dust is most prevalent during anticyclonic and pretrough synoptic conditions as categorized by self-organizing maps.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1981

A shuttle scanning laser altimeter for topographic mapping

The shuttle scanning laser altimeter is an instrument, currently under development at JPL, capable of producing a three-dimensional elevation map of the topography along a wide swath beneath a spaceborne platform. Operating on the same principle as radar (broadcast of a short pulse of radiation and timing the reception of an echo) the very narrow beamwidths and high pulse rates of modern lasers would allow a significant breakthrough in the areal resolution capability of altimeters. Specifically, the copper vapor laser currently available and planned for use would provide 50 meter horizontal and 3 meter vertical resolution over a 10 kilometer continuous swath or, in a snapshot mode, a 50 kilometer square area.

Kobrick, M.↗
DOE OSTI2020

Optical Design and Characterization of 40-GHz Detector and Module for the BICEP Array

Families of cosmic inflation models predict a primordial gravitational-wave background that imprints B-mode polarization pattern in the cosmic microwave background (CMB). High-sensitivity instruments with wide frequency coverage and well-controlled systematic errors are needed to constrain the faint B-mode amplitude. We have developed antenna-coupled transition edge sensor arrays for high-sensitivity polarized CMB observations over a wide range of millimeter-wave bands. BICEP array, the latest phase of the BICEP/Keck experiment series, is a multi-receiver experiment designed to search for inflationary B-mode polarization to a precision σ(r) between 0.002 and 0.004 after 3 full years of observations, depending on foreground complexity and the degree of lensing removal. We describe the electromagnetic design and measured performance of BICEP array’s low-frequency 40-GHz detector, their packaging in focal plane modules, and optical characterization including efficiency and beam matching between polarization pairs. We summarize the design and simulated optical performance, including an approach to improve the optical efficiency due to mismatch losses. Here, we report the measured beam maps for a new broadband corrugation design to minimize beam differential ellipticity between polarization pairs caused by interactions with the module housing frame, which helps minimize polarized beam mismatch that converts CMB temperature to polarization (T→P) anisotropy in CMB maps.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Magnetic Misalignment of Interstellar Dust Filaments

We present evidence for scale-independent misalignment of interstellar dust filaments and magnetic fields. We estimate the misalignment by comparing millimeter-wave dust-polarization measurements from Planck with filamentary structures identified in neutral-hydrogen (H I ) measurements from H I 4PI. We find that the misalignment angle displays a scale independence (harmonic coherence) for features larger than the H I 4PI beamwidth (16$\acute{.}$2). We additionally find a spatial coherence on angular scales of ${ \mathcal O }(1^\circ )$. We present several misalignment estimators formed from the auto- and cross-spectra of dust-polarization and H I -based maps, and we also introduce a map-space estimator. Applied to large regions of the high-Galactic-latitude sky, we find a global misalignment angle of ~2°, which is robust to a variety of masking choices. By dividing the sky into small regions, we show that the misalignment angle correlates with the parity-violating TB cross-spectrum measured in the Planck dust maps. The misalignment paradigm also predicts a dust EB signal, which is of relevance in the search for cosmic birefringence but as yet undetected; the measurements of EB are noisier than those of TB, and our correlations of EB with misalignment angle are found to be weaker and less robust to masking choices. We also introduce an H I -based dust-polarization template constructed from the Hessian matrix of the H I intensity, which is found to correlate more strongly than previous templates with Planck dust B modes.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Probing Venus's cloud structure with Galileo NIMS

The spectral image cubes obtained by the Near-Infrared Mapping Spectrometer (NIMS) on Galileo as it flew by Venus have been analyzed to constrain the vertical structure of the clouds, the nature of the aerosol particles, and the location and particle properties of the opacity variations responsible for high-contrast features observed in the near-infrared windows at 1.7 and 2.3 micrometers. A radiative transfer program was used to simulate mid-latitude curves of limb darkening at 3.7 micrometers. Best-fit models to these curves demonstrate that the upper clouds are dominated by mode 2 particles (r-bar = 1.0 micrometers), with a contribution of approximately 15% of opacity from mode 1 particles (r-bar = 0.3 micrometers). The low-latitude upper cloud is well represented by a dual scale-height model, with a particle scale height of approximately 1 km from an altitude of 61-63 km, and a scale height of approximately 6 km above this, up to the level where tau = 1 at approximately 71 km. This model also successfully simulates limb-darkening curves at 11.5 micrometers from the Pioneer Venus Orbiter Infrared Radiometer. Successful simulations of correlation plots of 1.7 vs 2.3 micrometers intensities reveal that mode 3 particles (r-bar = 3.65 micrometers) represent the dominant source of opacity in the lower and middle clouds, and that variation in total cloud opacity reflects chiefly the addition and removal of mode 3 particles near the cloud base. We find that the full spectrum of brightnesses at 1.7 and 2.3 micrometers implies that the total cloud optical depth varies from approximately 25 to approximately 40.

Grinspoon, D. H.↗
NASA NTRS1982

High resolution analysis

The possibilities for the use of high spectral resolution analysis in the field of hydrology and water resources are examined. Critical gaps in scientific knowledge that must be filled before technology can be evaluated involve the spectral response of water, substances dissolved and suspended in water, and substances floating on water. The most complete mapping of oil slicks can be done in the ultraviolet region. A mean of measuring the ultraviolet reflection at the surface from satellite altitudes needs to be determined. The use of high spectral resolution sensors in a reasonable number of narrow bands may be able to sense the reflectance or emission characteristics of water and its contained materials that can be correlated with commonly used water quality variables. Technological alternative available to experiment with problems of sensing water quality are to use existing remote sensing instrumentation in an empirical mode and to develop instruments for either testing hypoteses or conducting empirical experiments.

Robinove, C. J.↗
NASA NTRS1999

Quantitative Species Measurements in Microgravity Combustion Flames using Near-Infrared Diode Lasers

Understanding the physical phenomena controlling the ignition and spread of flames in microgravity has importance for space safety as well as for characterizing dynamical and chemical combustion processes which are normally masked by buoyancy and other gravity-related effects. Unfortunately, combustion is highly complicated by fluid mechanical and chemical kinetic processes, requiring the use of numerical modeling to compare with carefully designed experiments. More sophisticated diagnostic methods are needed to provide the kind of quantitative data necessary to characterize the properties of microgravity combustion as well as provide accurate feedback to improve the predictive capabilities of the models. Diode lasers are a natural choice for use under the severe conditions of low gravity experiments. Reliable, simple solid state operation at low power satisfies the operational restrictions imposed by drop towers, aircraft and space-based studies. Modulation wavelength absorption spectroscopy (WMS) provides a means to make highly sensitive and quantitative measurements of local gas concentration and, in certain cases, temperature. With near-infrared diode lasers, detection of virtually all major combustion species with extremely rapid response time is possible in an inexpensive package. Advancements in near-infrared diode laser fabrication technology and concurrent development of optical fibers for these lasers led to their use in drop towers. Since near-infrared absorption line strengths for overtone and combination vibrational transitions are weaker than the mid-infrared fundamental bands, WMS techniques are applied to increase detection sensitivity and allow measurement of the major combustion gases. In the first microgravity species measurement, Silver et al. mounted a fiber-coupled laser at the top of the NASA 2.2-sec drop tower and piped the light through a single-mode fiber to the drop rig. A fiber splitter divided the light into eight channels that directed the laser beam across a methane or propane diffusion jet flame. The light beams were recaptured by a set of gradient index lenses, coupled back into separate fiber optic lines, and transmitted back to detectors and electronics in the instrument package. In these experiments a 6-mm od fiber cable (containing the nine optical fibers) fell with the drop rig. Using separate detection and demodulation channels, spatial and temporal (up to 20 Hz) maps of water vapor and methane concentrations were obtained at differing heights in the flames. While this apparatus was useful from a demonstration standpoint, several drawbacks needed attention before useful scientific measurements could be obtained. First, eight lines of sight are somewhat insufficient for detailing the spatial profiles of the gas. Second, multiple detection channels operating in parallel are both expensive and present a challenge for accurate calibration. As a result, a newer scanning system was developed in our first contract under this program. The primary characteristic of this system is that it contains a single detection channel and achieves "continuous" spatial resolution by scanning the laser beam across the flame region, then directing this beam onto a single detector. Thus spatial measurements are converted to a temporal series of data. The true spatial resolution is limited only by the beam diameter and width of the sweep. In these experiments the beam is focused to about 1-mm diameter and scans across a region up to 4-cm wide.

Silver, Joel A.↗
NASA NTRSDate not supplied

What Went Wrong: A Survey of Wildfire UAS Mishaps through Named Entity Recognition

Increasingly, unmanned aircraft systems (UAS) are being applied to wildfire incidents for tasks such as mapping, aerial ignition, and delivery. As a result, aviation incident reporting systems for wildfires are beginning to accumulate data related to UAS mishaps in wildfire response. In this research, we apply state-of-the-art natural language processing (NLP) techniques to develop a custom Named Entity Recognition (NER) model which extracts entities relevant to safety analysts. The custom NER model is built by fine-tuning an existing Bidirectional Encoder Representations from Transformers (BERT) model, resulting in a generalizable NER model that can extract engineering relevant entities including failure modes, causes, effects, control processes, and recommendations from failure-relevant text. This model performs passably, with a weighted average f1 score of 0.33 across entity types, indicating more labeled training data is needed. Extracted entities are used to form a Failure Modes and Effects Analysis (FMEA)-style survey of wildfire UAS mishaps reported using the SAFECOM system. Similar mishaps are manually clustered and reported as single rows within an FMEA. Foreach cluster, we compute frequency, severity, and overall riskin accordance with FAA standards. This methodology can beapplied as part of a broader safety management system totrack trends in mishaps (e.g., likelihood, severity) and discoverknowledge (e.g., causes, effects) that can be utilized to improvesafety outcomes and system performance.

Machine Learning↗
NASA NTRS2019

Alfvenic Fluctuations Associated with Jupiter's Auroral Emissions

The Alfvén wave mode transmits field‐aligned currents and large‐scale turbulence throughout Jupiter's magnetosphere. Magnetometer data from the Juno spacecraft have provided the first observations of Alfvénic fluctuations along the polar magnetic flux tubes connected to Jupiter's main auroral oval and the Jovian satellites. Transverse magnetic field perturbations associated with Io are observed up to ~90° away from main Io footprint, supporting the presence of extended Alfvénic wave activity throughout the Io footprint tail. Additional broadband fluctuations measured equatorward of the statistical auroral oval are composed of incompressible magnetic turbulence that maps to Jupiter's equatorial plasma sheet at radial distances within ~20 R(sub J). These fluctuations exhibit a k(sub ||) power spectrum consistent with strong magnetohydrodynamic turbulence. This turbulence can generate up to ~100 mW/m(exp 2) of Poynting flux to power the Jovian aurora in regions connected to the inner magnetosphere's central plasma sheet.

Gershman, Daniel J.↗
NASA NTRS2021

Science Status of the NASA-ISRO SAR Mission

The NASA-ISRO SAR (NISAR) Mission is entering its second phase of integration and test, preparing for a launch in January 2023. The mission will exploit synthetic aperture radar to map Earth’s surface every 12 days, persistently on ascending and descending portions of the orbit, over all land and ice-covered surfaces. The mission’s primary objectives will be to study Earth land and ice deformation, and ecosystems, in areas of common interest to the US and Indian science communities. This single observatory solution with an L-band (24 cm wavelength) and S-band (10 cm wavelength) radar has a swath of over 240 km at fine resolution, and will operate primarily in a dual-polarimetric mode in an exact repeat orbit. The science teams at NASA and ISRO are working jointly to finalize the joint science plan, calibration and validation plan, and science products, and operational procedures.

Kumar, Raj↗
NASA NTRS1978

Plasma density mapping in the solar wind through use of VHF radio to measure electron content

How the electron content between the Solar probe and the earth can be observed with a minimum of equipment and give a quantitative rationale for the use of a signal near 400 MHz to supplement the telecommunications signal is described. The emphasis is on the method of making content observations and on their value. While far from the Sun, the electron content is so low that the S-X dual-frequency system is insufficiently sensitive and a UHF system is optimum. As the probe approaches the Sun, the UHF may be disrupted by scintillation and the variations of the telecommunications signal must be used for the content measurement. By operating the suggested system in different modes as the solar distance changes, operation during the entire mission is possible.

Croft, T. A.↗
DOE OSTI2021

ForSE: A GAN-based Algorithm for Extending CMB Foreground Models to Subdegree Angular Scales

We present ForSE (Foreground Scale Extender), a novel Python package that aims to overcome the current limitations in the simulation of diffuse Galactic radiation, in the context of cosmic microwave background (CMB) experiments. ForSE exploits the ability of generative adversarial neural networks (GANs) to learn and reproduce complex features present in a set of images, with the goal of simulating realistic and non-Gaussian foreground radiation at subdegree angular scales. This is of great importance in order to estimate the foreground contamination to lensing reconstruction, delensing, and primordial B-modes for future CMB experiments. We applied this algorithm to Galactic thermal dust emission in both total intensity and polarization. Our results show how ForSE is able to generate small-scale features (at 12') having as input the large-scale ones (80'). The injected structures have statistical properties, evaluated by means of the Minkowski functionals, in good agreement with those of the real sky and which show the correct amplitude scaling as a function of the angular dimension. Furthermore, the obtained thermal dust Stokes Q and U full-sky maps as well as the ForSE package are publicly available for download.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1988

Preliminary assessment of airborne imaging spectrometer and airborne thematic mapper data acquired for forest decline areas in the Federal Republic of Germany

This study evaluated the utility of data collected by the high-spectral resolution airborne imaging spectrometer (AIS-2, tree mode, spectral range 0.8-2.2 microns) and the broad-band Daedalus airborne thematic mapper (ATM, spectral range 0.42-13.0 micron) in assessing forest decline damage at a predominantly Scotch pine forest in the FRG. Analysis of spectral radiance values from the ATM and raw digital number values from AIS-2 showed that higher reflectance in the near infrared was characteristic of high damage (heavy chlorosis, limited needle loss) in Scotch pine canopies. A classification image of a portion of the AIS-2 flight line agreed very well with a damage assessment map produced by standard aerial photointerpretation techniques.

Herrmann, Karin↗
DOE OSTI2022

Photodissociation Dynamics of Astrophysically Relevant Propyl Derivatives (C 3 H 7 X; X = CN, OH, HCO) at 157 nm Exploiting an Ultracompact Velocity Map Imaging Spectrometer: The (Iso)Propyl Channel

The photodissociation dynamics of astrophysically relevant propyl derivatives (C 3 H 7 X; X = CN, OH, HCO) at 157 nm exploiting an ultracompact velocity map imaging (UVMIS) setup has been reported. The successful operation of UVMIS allowed the exploration of the 157 nm photo dissociation of six (iso)propyl systems - n/i-propyl cyanide (C 3 H 7 CN), n/i-propyl alcohol (C 3 H 7 OH), and (iso)butanal (C 3 H 7 CHO) – to explore the C 3 H 7 loss channel. The distinct center-of-mass translational energy distributions for the i-C 3 H 7 X (X= CN, OH, HCO) could be explained through preferential excitation of the low frequency C-H bending modes of the formyl moiety compared to the higher frequency stretchings of the cyano and hydroxy moieties. Although the ionization energy of the n-C 3 H 7 radical exceeds the energy of a 157 nm photon, C 3 H 7 + was observed in the n-C 3 H 7 X (X= CN, OH, HCO) systems as a result of photoionization of vibrationally "hot" n-C 3 H 7 fragments, photoionization of i-C 3 H 7 after a hydrogen shift in vibrationally "hot" n-C 3 H 7 radicals, and/or two-photon ionization. Our experiments reveal that at least the isopropyl radical (i-C 3 H 7 ) and possibly the normal propyl radical (n-C 3 H 7 ) should be present in the interstellar medium and hence searched for by radio telescopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗