Search NASA⌕ Search

SEARCH · Search NASA

Results for “Most representative cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Environmental Life Cycle Assessment of small water resource recovery facilities: Comparison of mechanical and lagoon systems

Small water resource recovery facilities (WRRFs) serving communities with populations of less than 10,000 people account for 70% of centralized wastewater treatment systems in the United States. Here, with growing interest globally in improving the sustainability of these systems, this study evaluated the environmental life cycle impact and land use tradeoffs of different lagoon and mechanical WRRFs across the diverse climate of Nebraska. Life cycle inventory including construction and operations was collected for 35 existing systems representing a range of commonly used mechanical WRRFs: oxidation ditch, extended aeration, and sequencing batch reactors, and lagoon treatment systems: complete retention, irrigation, and controlled discharge lagoons.

42 ENGINEERING↗

LiMn 2 O 4 Surface Chemistry Evolution during Cycling Revealed by in Situ Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

This work utilizes in situ electrochemical and analytical characterization during cycling of LiMn 2 O 4 (LMO) equilibrated at different potentials in an ultrahigh vacuum (UHV) environment. The LMO reacts with organic molecules in the vacuum to form a high surface concentration of Li 2 CO 3 (≈50% C) during initial charging to 4.05 V. Charging to higher potentials reduces the overall Li 2 CO 3 concentration (≈15% C). Discharging to 3.0 V increases the Li 2 CO 3 concentration (≈30% C) and over discharging to 0.1 V again reduces its concentration (≈15% C). This behavior is reproducible over 5 cycles. The model geometry utilized suggests that oxygen from LMO can participate in redox of carbon, where LMO contributes oxygen to form the carbonate in the solid electrolyte interphase (SEI). Similar results were obtained from samples cycled ex situ , suggesting that the model in situ geometry provides reasonably representative information about surface chemistry evolution. Finally, carbon redox at LMO and the inherent voltage instability of the Li 2 CO 3 likely contributes significantly to its capacity fade.

25 ENERGY STORAGE↗

Assessing Two Approaches for Enhancing the Range of Simulated Scales in the E3SMv1 and the Impact on the Character of Hourly US Precipitation

Abstract Improving the representation of precipitation in Earth system models is essential for understanding and projecting water cycle changes across scales. Progress has been hampered by persistent deficiencies in representing precipitation frequency, intensity, and timing in current models. Here, we analyze simulated US precipitation in the low‐resolution (LR) configuration of the Energy Exascale Earth System Model (E3SMv1) and assess the effect of two approaches to enhance the range of explicitly resolved scales: high‐resolution (HR) and multiscale modeling framework (MMF), which incur similar computational expense. Both E3SMv1‐MMF and E3SMv1‐HR capture more intense and less frequent precipitation on hourly and daily timescales relative to E3SMv1‐LR. E3SMv1‐HR improves the intensity over the Eastern and Northwestern US during winter, while E3SMv1‐MMF improves the intensity over the Eastern US and summer diurnal timing over the Central US. These results indicate that both methods may be needed to improve simulations of different storm types, seasons, and regions.

58 GEOSCIENCES↗

Nontargeted virus sequence discovery pipeline and virus clustering for metagenomic data

The analysis of large microbiome data sets holds great promise for the delineation of the biological and metabolic functioning of living organisms and their role in the environment. In the midst of this genomic puzzle, viruses, especially those that infect microbial communities, represent a major reservoir of genetic diversity with great impact on biogeochemical cycles and organismal health. Overcoming the limitations associated with virus detection directly from microbiomes can provide key insights into how ecosystem dynamics are modulated. Here, we present a computational protocol for accurate detection and grouping of viral sequences from microbiome samples. Our approach relies on an expanded and curated set of viral protein families used as bait to identify viral sequences directly from metagenomic assemblies. This protocol describes how to use the viral protein families catalog (~7 h) and recommended filters for the detection of viral contigs in metagenomic samples (~6 h), and it describes the specific parameters for a nucleotide-sequence-identity-based method of organizing the viral sequences into quasi-species taxonomic-level groups (~10 min).

Paez-Espino, David↗

Quantitative stable isotope probing (qSIP)-informed metagenomics identifies viruses infecting chemoautotrophs

Aquatic environments absorb ~2.5 gigatonnes of atmospheric carbon each year1, more than the carbon stored in the atmosphere, soils, and all biomass combined. Primary producers transform this dissolved inorganic carbon into biomass that can subsequently flow into other trophic levels, or be released back into the environment through viral lysis. While there is substantial knowledge about the diversity and activity of viruses infecting photoautotrophic primary producers and the ecosystem impact, little is known about viruses infecting chemoautotrophs, representing a gap in our understanding of key processes driving microbial carbon cycling. Here, we combine metagenomics with quantitative 12/13C stable isotopic probing (qSIP) mesocosm experiments in a marine-derived meromictic pond to quantify population-specific isotopic enrichment, identify key chemoautotrophic primary producers, and virus-host dynamics. Isotopically enriched carbon is tracked from the genomes of chemoautotrophs to putative viruses, showing that active populations of hydrogen/sulfur-oxidizing chemoautotrophs (Thiomicrorhabdus, Hydrogenovibrio, Sulfurimonas, Sulfurovum) are targeted by viruses. This work provides the foundation for revealing the diversity and activity of viruses infecting globally-widespread chemoautotrophs. Our study sheds light on trophic interactions that impact microbial carbon cycling in aphotic environments and builds toward biogeochemical models that incorporate viral impacts on chemoautotrophic microbial communities.

59 BASIC BIOLOGICAL SCIENCES↗

Drought re-routes soil microbial carbon metabolism towards emission of volatile metabolites in an artificial tropical rainforest

Drought impacts on microbial activity can alter soil carbon fate and lead to the loss of stored carbon to the atmosphere as CO 2 and volatile organic compounds (VOCs). Here we examined drought impacts on carbon allocation by soil microbes in the Biosphere 2 artificial tropical rainforest by tracking 13 C from position-specific 13 C-pyruvate into CO 2 and VOCs in parallel with multi-omics. During drought, efflux of 13 C-enriched acetate, acetone and C 4 H 6 O 2 (diacetyl) increased. These changes represent increased production and buildup of intermediate metabolites driven by decreased carbon cycling efficiency. Simultaneously, 13 C-CO 2 efflux decreased, driven by a decrease in microbial activity. However, the microbial carbon allocation to energy gain relative to biosynthesis was unchanged, signifying maintained energy demand for biosynthesis of VOCs and other drought-stress-induced pathways. Overall, while carbon loss to the atmosphere via CO 2 decreased during drought, carbon loss via efflux of VOCs increased, indicating microbially induced shifts in soil carbon fate.

59 BASIC BIOLOGICAL SCIENCES↗

Developing a laser shockwave model for characterizing diffusion bonded interfaces

The US National Nuclear Security Agency has a Global Threat Reduction Initiative (GTRI) with the goal of reducing the worldwide use of high-enriched uranium (HEU). A salient component of that initiative is the conversion of research reactors from HEU to low enriched uranium (LEU) fuels. An innovative fuel is being developed to replace HEU in high-power research reactors. The new LEU fuel is a monolithic fuel made from a U-Mo alloy foil encapsulated in Al-6061 cladding. In order to support the fuel qualification process, the Laser Shockwave Technique (LST) is being developed to characterize the clad-clad and fuel-clad interface strengths in fresh and irradiated fuel plates. LST is a non-contact method that uses lasers for the generation and detection of large amplitude acoustic waves to characterize interfaces in nuclear fuel plates. However, because the deposition of laser energy into the containment layer on a specimen's surface is intractably complex, the shock wave energy is inferred from the surface velocity measured on the backside of the fuel plate and the depth of the impression left on the surface by the high pressure plasma pulse created by the shock laser. To help quantify the stresses generated at the interfaces, a finite element method (FEM) model is being utilized. This paper will report on initial efforts to develop and validate the model by comparing numerical and experimental results for back surface velocities and front surface depressions in a single aluminum plate representative of the fuel cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A unique ecological niche fosters hybridization of oak-tree and vineyard isolates of Saccharomyces cerevisiae

We report that differential adaptation to distinct niches can restrict gene flow and promote population differentiation within a species. However, in some cases the distinction between niches can collapse, forming a hybrid niche with features of both environments. We previously reported that distinctions between vineyards and oak soil present an ecological barrier that restricts gene flow between lineages of Saccharomyces cerevisiae. Vineyard isolates are tolerant to stresses associated with grapes while North American oak strains are particularly tolerant to freeze–thaw cycles. Here, we report the isolation of S. cerevisiae strains from Wisconsin cherry trees, which display features common to vineyards (e.g. high sugar concentrations) and frequent freeze–thaw cycles. Genome sequencing revealed that the isolated strains are highly heterozygous and represent recent hybrids of the oak × vineyard lineages. We found that the hybrid strains are phenotypically similar to vineyard strains for some traits, but are more similar to oak strains for other traits. The cherry strains were exceptionally good at growing in cherry juice, raising the possibility that they have adapted to this niche. We performed transcriptome profiling in cherry, oak and vineyard strains and show that the cherry-tree hybrids display vineyard-like or oak-like expression, depending on the gene sets, and in some cases, the expression patterns linked back to shared stress tolerances. Allele-specific expression in these natural hybrids suggested concerted cis-regulatory evolution at sets of functionally regulated genes. In conclusion, our results raise the possibility that hybridization of the two lineages provides a genetic solution to the thriving in this unique niche.

54 ENVIRONMENTAL SCIENCES↗

Defrost Temperature Termination in Supermarket Refrigeration Systems

The objective of this project was to determine the potential energy savings associated with implementing demand defrost strategies to defrost supermarket refrigerated display case evaporators, as compared to the widely accepted current practice of controlling display case defrost cycles with a preset timer. The defrost heater energy use of several representative display case types was evaluated. In addition, demand defrost strategies for refrigerated display cases as well as those used in residential refrigerator/freezers were evaluated. Furthermore, it is anticipated that future work will include identifying a preferred defrost strategy, with input from Retail Energy Alliance members. Based on this strategy, a demand defrost system will be designed which is suitable for supermarket refrigerated display cases. Limited field testing of the preferred defrost strategy will be performed in a supermarket environment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Opportunities in SMR Emergency Planning

Using year 2014 cost information gathered from twenty different locations within the current commercial nuclear power station fleet, an assessment was performed concerning compliance costs associated with the offsite emergency Planning Standards contained in 10 CFR 50.47(b). The study was conducted to quantitatively determine the potential cost benefits realized if an emergency planning zone (EPZ) were reduced in size according to the lowered risks expected to accompany small modular reactors (SMR). Licensees are required to provide a technical basis when proposing to reduce the surrounding EPZ size to less than the 10 mile plume exposure and 50 mile ingestion pathway distances currently being used. To assist licensees in assessing the savings that might be associated with such an action, this study established offsite emergency planning costs in connection with four discrete EPZ boundary distances, i.e., site boundary, 2 miles, 5 miles and 10 miles. The boundary selected by the licensee would be based on where EPA Protective Action Guidelines are no longer likely to be exceeded. Additional consideration was directed towards costs associated with reducing the 50 mile ingestion pathway EPZ. The assessment methodology consisted of gathering actual capital costs and annual operating and maintenance costs for offsite emergency planning programs at the surveyed sites, partitioning them according to key predictive factors, and allocating those portions to individual emergency Planning Standards as a function of EPZ size. Two techniques, an offsite population-based approach and an area-based approach, were then employed to calculate the scaling factors which enabled cost projections as a function of EPZ size. Site-specific factors that influenced source data costs, such as the effects of supplemental funding to external state and local agencies for offsite response organization activities, were incorporated into the analysis to the extent those factors could be representatively apportioned.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fixed-Site KAZR b1 Data Processing: Corrections, Calibrations, and Processing Report

The U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) User Facility operates three fixed-site observatories: Eastern North Atlantic (ENA), North Slope of Alaska (NSA), and Southern Great Plains (SGP). Each fixed site has a wide variety of atmospheric instrumentation that has been collecting data for at least 10 years (NSA and SGP over 25 years). Each site is unique because it represents a different climate state. The environment at ENA is characterized by marine stratocumulus clouds and one of the key scientific areas of focus is the interaction of these clouds with aerosols. At NSA the focus is on arctic climate and cloud and radiative processes in a high-latitude environment. SGP represents a mid-latitude, mid-continent climate that experiences environmental cycles on diurnal and seasonal time scales. The ARM observatories are all meant to improve understanding of atmospheric processes that can then be better incorporated into weather and climate models. Another common thread between the fixed sites is the focus on cloud processes. Each site is equipped with at least one radar that provides continuous remote-sensing observations of clouds and precipitation. This report details the analysis of a1-level radar data at the fixed sites and the process for generating b1-level data. While b1-level data have been produced for ARM campaigns at the mobile facilities, this is the first analysis led by ARM radar mentors to correct data at the fixed sites. In particular, we focus on calibrations and corrections of the Ka-band ARM Zenith Radars (KAZRs) at ENA, NSA, and SGP. Ongoing and future work will involve corrections applied to other fixed-site radars.

54 ENVIRONMENTAL SCIENCES↗

Phylogeny and phylogeography of functional genes shared among seven terrestrial subsurface metagenomes reveal N-cycling and microbial evolutionary relationships

Comparative studies on community phylogenetics and phylogeography of microorganisms living in extreme environments are rare. Terrestrial subsurface habitats are valuable for studying microbial biogeographical patterns due to their isolation and the restricted dispersal mechanisms. Since the taxonomic identity of a microorganism does not always correspond well with its functional role in a particular community, the use of taxonomic assignments or patterns may give limited inference on how microbial functions are affected by historical, geographical and environmental factors. With seven metagenomic libraries generated from fracture water samples collected from five South African mines, this study was carried out to (1) screen for ubiquitous functions or pathways of biogeochemical cycling of CH 4 , S, and N; (2) to characterize the biodiversity represented by the common functional genes; (3) to investigate the subsurface biogeography as revealed by this subset of genes; and (4) to explore the possibility of using metagenomic data for evolutionary study. The ubiquitous functional genes are NarV, NPD, PAPS reductase, NifH, NifD, NifK, NifE, and NifN genes. Although these eight common functional genes were taxonomically and phylogenetically diverse and distinct from each other, the dissimilarity between samples did not correlate strongly with geographical or environmental parameters or residence time of the water. Por genes homologous to those of Thermodesulfovibrio yellowstonii detected in all metagenomes were deep lineages of Nitrospirae, suggesting that subsurface habitats have preserved ancestral genetic signatures that inform the study of the origin and evolution of prokaryotes.

59 BASIC BIOLOGICAL SCIENCES↗

Life prediction of materials exposed to monotonic and cyclic loading: Bibliography

This bibliography is comprised of approximately 1200 reference citations related to the mechanics of failure in aerospace structures. Most of the references are for information on life prediction for materials exposed to monotonic and cyclic loading in elevated temperature environments such as that in the hot end of a gas turbine engine. Additional citations listed are for documents on the thermal and mechanical effects on solar cells in the cryogenic vacuum environment; radiation effects on high temperature mechanical properties; and high cycle fatigue technology as applicable to gas turbine engine bearings. The bibliography represents a search of the literature published in the period April 1962 through April 1974 and is largely limited to documents published in the United States. It is a companion volume to NASA CR-134750, Life Prediction of Materials Exposed to Monotonic and cyclic Loading - A Technology Survey.

Carpenter, J. L., Jr.↗

Acceleration of fatigue tests for built-up titanium components

A study was made of the feasibility of a room-temperature scheme of accelerating fatigue tests for Mach 3 advanced supersonic transport aircraft. The test scheme used equivalent room-temperature cycles calculated for supersonic flight conditions. Verification tests were conducted using specimens representing titanium wing lower surface structure. Test-acceleration parameters were developed for the test with an auxiliary test set. Five specimens were tested with a flight-by-flight load and temperature spectrum to simulate typical Mach 3 operation. Two additional sets of five specimens were tested at room temperature to evaluate the test-acceleration scheme. The fatigue behavior of the specimens generally correlated well with the proposed correction method.

Watanabe, R. T.↗

Photovoltaic module bypass diode encapsulation

The design and processing techniques necessary to incorporate bypass diodes within the module encapsulant are presented. The Semicon PN junction diode cells were selected. Diode junction to heat spreader thermal resistance measurements, performed on a variety of mounted diode chip types and sizes, have yielded values which are consistently below 1 deg C per watt, but show some instability when thermally cycled over the temperature range from -40 to 150 deg C. Three representative experimental modules, each incorporating integral bypass diode/heat spreader assemblies of various sizes, were designed. Thermal testing of these modules enabled the formulation of a recommended heat spreader plate sizing relationship. The production cost of three encapsulated bypass diode/heat spreader assemblies were compared with similarly rated externally mounted packaged diodes. It is concluded that, when proper designed and installed, these bypass diode devices will improve the overall reliability of a terrestrial array over a 20 year design lifetime.

Shepard, N. J., Jr.↗

Far-ultraviolet observations of BW Vulpeculae with Voyager 2

BW Vul has been the subject of numerous ground-based spectroscopic and photometric studies. However, observations in the ultraviolet have been limited. The Voyager 2 observations presented in the current study include the first observations of BW Vul shortward of 1200 A. Voyager 2 observations in the 912-1700 A region are employed to investigate the variations in the temperature, radius, and luminosity of BW Vul during a pulsation cycle. Attention is given to details regarding the observations, the light curves representing the variation of BW Vul at effective wavelengths of 1050 A and 1395 A, the UV spectra, comparisons with other stars, comparisons with models, and the amplitude-wavelength relation.

Barry, D. C.↗

Detonation wave compression in gas turbines

A study was made of the concept of augmenting the performance of low pressure ratio gas turbines by detonation wave compression of part of the flow. The concept exploits the constant volume heat release of detonation waves to increase the efficiency of the Brayton cycle. In the models studied, a fraction of the compressor output was channeled into detonation ducts where it was processed by transient transverse detonation waves. Gas dynamic studies determined the maximum cycling frequency of detonation ducts, proved that upstream propagation of pressure pulses represented no problems and determined the variations of detonation duct output with time. Mixing and wave compression were used to recombine the combustor and detonation duct flows and a concept for a spiral collector to further smooth the pressure and temperature pulses was presented as an optional component. The best performance was obtained with a single firing of the ducts so that the flow could be re-established before the next detonation was initiated. At the optimum conditions of maximum frequency of the detonation ducts, the gas turbine efficiency was found to be 45 percent while that of a corresponding pressure ratio 5 conventional gas turbine was only 26%. Comparable improvements in specific fuel consumption data were found for gas turbines operating as jet engines, turbofans, and shaft output machines. Direct use of the detonation duct output for jet propulsion proved unsatisfactory. Careful analysis of the models of the fluid flow phenomena led to the conclusion that even more elaborate calculations would not diminish the uncertainties in the analysis of the system. Feasibility of the concept to work as an engine now requires validation in an engineering laboratory experiment.

Wortman, A.↗