Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Optical fibres and fibre tapers with an array of Bragg gratings

The properties of optical fibres with an array of fibre Bragg gratings written directly during the fibre drawing are considered. Such optical fibres offer new possibilities for producing new types of active and passive fibre elements due to the enhanced back-reflected signal of the so-called artificial Rayleigh scattering, and are of interest for modelling physical phenomena associated with the statistics of reflecting centres in optical fibres, such as, e.g., localisation of photons. We studied fibres with an array of Bragg gratings written in photosensitive fibres, ordinary single-mode optical fibre of the SMF-28 type and in fibre with a core doped with erbium ions. To control the spectrum width of the reflected signal, we used chirped phase masks, as well as writing arrays of gratings in tapered optical fibres. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Realistic reflectance spectrum of thin films covering a transparent optically thick substrate

A spectrophotometric strategy is presented and discussed for calculating realistically the reflectance spectrum of an absorbing film deposited over a thick transparent or semi-transparent substrate. The developed route exploits simple mathematics, has wide range of applicability (high-to-weak absorption regions and thick-to-ultrathin films), rules out numerical and curve-fitting procedures as well as model-functions, inherently accounts for the non-measurable contribution of the film-substrate interface as well as substrate backside, and describes the film reflectance spectrum as determined by the experimental situation (deposition approach and parameters). The reliability of the method is tested on films of a well-known material (indium tin oxide) by deliberately changing film thickness and structural quality through doping. Results are found consistent with usual information yielded by reflectance, its inherent relationship with scattering processes and contributions to the measured total reflectance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diaphragm size and sensitivity for fiber optic pressure sensors

A mechanism which leads to a significant increase in sensitivity and linear operating range in reflective type fiber optic pressure transducers with minute active dimensions is studied. A general theoretical formalism is presented which is in good agreement with the experimental data. These results are found useful in the development of small pressure sensors used in turbulent boundary layer studies and other applications.

He, Gang↗

Retrieval of Aerosol Optical Depth in Vicinity of Broken Clouds from Reflectance Ratios: Sensitivity Study

We conducted a sensitivity study to better understand the potential of a new method for retrieving aerosol optical depth (AOD) under partly cloudy conditions. This method exploits reflectance ratios in the visible spectral range and provides an effective way to avoid three-dimensional (3D) cloud effects. The sensitivity study is performed for different observational conditions and random errors in input data. The results of the sensitivity study suggest that this ratio method has the ability to detect clear pixels even in close proximity to clouds. Such detection does not require a statistical analysis of the two-dimensional (2D) horizontal distribution of reflected solar radiation, and thus it could be customized for operational retrievals. In comparison with previously suggested approaches, the ratio method has the capability to increase the "harvest" of clear pixels. Similar to the traditional Independent Pixel Approximation (IPA), the ratio method has a low computational cost for retrieving AOD. In contrast to the IPA method, the ratio method provides much more accurate estimations of the AOD values under broken cloud conditions: pixel-based and domain-averaged estimations of errors in AOD are about 25% and 10%, respectively. Finally, both the ratio-based cloud screening and the accuracy of domain-averaged ratio-based AOD values do not suffer greatly when 5% random errors are introduced in the reflectances.

54 ENVIRONMENTAL SCIENCES↗

Spatially resolved characterization of optical and recombination losses for different industrial silicon solar cell architectures

In this work, spatially resolved characterization methods are used to identify loss mechanisms for common p -type silicon solar cell architectures, including multicrystalline aluminum back surface field (Al-BSF), monocrystalline Al-BSF, monocrystalline passivated emitter and rear cells (PERC), and bifacial monocrystalline PERC. The characterization methods used in this work include suns-V OC , photoluminescence imaging, and spatially resolved external quantum efficiency and reflectance measurements. The optical and recombination losses are driven by the material properties, cell processing conditions, and device architecture. These losses are quantified and categorized in terms of underlying mechanisms (e.g., front reflectance, escape reflectance, front recombination, and parasitic optical absorption and recombination in the bulk and rear). The ability to create images of these loss parameters can be used to gain more insight into the materials and manufacturing processes used to produce solar cells, and examples are given in this work to illustrate how these images can help reveal the origin of defects.

14 SOLAR ENERGY↗

Mo/Si multilayer-coated amplitude-division beam splitters for XUV radiation sources

Amplitude-division beam splitters for XUV radiation sources have been developed and extensively characterized. Mo/Si multilayer coatings were deposited on 50 nm-thick SiN membranes. By changing the multilayer structure (periodicity, number of bilayers, etc.) the intensity of the reflected and transmitted beams were optimized for selected incident radiation parameters (wavelength, incident angle). The developed optical elements were characterized by means of XUV reflectometry and transmission measurements, atomic force microscopy and optical interferometry. Special attention was paid to the spatial homogeneity of the optical response and reflected beam wavefront distortions. Here the results of the characterization are presented and improvements required for advanced applications at XUV free-electron lasers are identified. A flatness as low as 4 nm r.m.s. on 3 × 3 mm beam splitters and 22 nm r.m.s. on 10 × 10 mm beam splitters has been obtained. The high-spatial-frequency surface roughness was about 0.7–1 nm r.m.s. The middle-spatial-frequency roughness was in the range 0.2–0.8 nm r.m.s. The reflection and transmission of the beam splitters were found to be very homogeneous, with a deviation of less than 2% across the full optical element.

47 OTHER INSTRUMENTATION↗

Effect of annealing temperature on the structure and optical parameters of Ge{sub 20}Se{sub 50}Te{sub 30} thin films

Highlights: • The amorphous nature of as prepared Ge{sub 20}Se{sub 50}Te{sub 30} films was confirmed by XRD. • The thermal annealing was found to affect the structure and optical parameter. • Thermal annealing resulted in an appearance of crystalline phases in studied films. • The average particle size increased with increasing the annealing temperature. • The indirect band gap was found to decrease with increasing annealing temperature. - Abstract: Bulk glasses and thin films of Ge{sub 20}Se{sub 50}Te{sub 30} were prepared by melt-quenching and thermal evaporation technique, respectively. The stoichiometry of the composition was checked by energy dispersive X-ray diffraction (EDX), whereas the crystallization was investigated using differential scanning calorimetery (DSC). The effect of heat treatment on the structure transformation of Ge{sub 20}Se{sub 50}Te{sub 30} films was determined by X-ray diffraction (XRD). The XRD results reveal that the as-prepared films are amorphous in nature while the annealed ones show crystalline phases. Further, the average crystallite size, strain, and dislocation density were found to depend on the annealing temperature. The optical transmittance and reflectance of the studied films at different annealing temperatures were measured using spectrophotometer. The optical parameters were calculated as a function of annealing temperature. The optical transition was found to be allowed indirect transition with optical band gap decreases from 1.69 to 1.41 eV with increasing the annealing temperature from 553 to 633 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bulk plasmons in metal-insulator superlattices

A simple model is proposed to describe the long-wavelength oscillations in metal-insulator super-lattices. In such structures, the frequency range of bulk plasmons is shown to expand substantially as compared to a homogeneous metal and to cover the optical range. Resonances related to such modes are predicted when an electromagnetic wave is reflected by an optically thin superlattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PVwindow (Photovoltaic Window Simulator) [SWR-22-01]

PVwindow simulates photovoltaic window properties by allowing the user build stacks of thin film materials that compose the window layers. The only needed inputs are the complex refractive indices and thicknesses of the materials. The software will simulate the optical transmission, front reflection, and back reflection of the stack using the transfer matrix method. Properties specific to PV window optics such as visible transmittance and color are also calculated. The optics code extracts the number of absorbed photons in the PV absorber layer and solves the single diode equation to yield theoretical photovoltaic metrics such as power conversion efficiency, fill factor, open circuit voltage, and short circuit current of the PV window when illuminated at an arbitrary angle or from either side of the stack. The software tool ultimately allows researchers to design photovoltaic windows and simulate their properties. The software also exports files that can be read into LBL Window software or into the EnergyPlus and Open Studio building energy modeling software to determine larger scale energy impacts of PV window integration.

Wheeler, Lance↗

Linear polarization sensitivity specifications for space-borne instruments

The radiometric accuracy of space-borne instruments such as radiometers and spectroradiometers which make measurements of the earth and other celestial objects can be compromised by the linear polarization sensitivity (LPS) induced by the optical system. Most of these optical systems contain optical elements whose reflectance or transmission is polarization dependent, such as diffraction gratings, folding and scanning mirrors, dichroic filters, and optical fibers. Optical system incorporating such elements generally display linear polarization sensitivity; different linear polarization states incident with equal radiometric power will be measured as different power levels. If the incident polarization state is unknown, the linear polarization sensitivity cannot be compensated during the data reduction. The light reflected from the earth and other planets and moons is usually partially linearly polarized, but in a random distribution. Thus, to make accurate radiometric measurements of these bodies, a radiometer or spectrometer should have a low level of linear polarization sensitivity. This paper contains a mathematical description of LPS, contains references to systems which have imposed a LPS specification, describes some of the sources of LPS, describes how to model LPS by polarization ray tracing, and discusses methods to reduce the LPS of an optical system.

Maymon, Peter W.↗

High Speed and High Spatial Density Parameter Measurement Using Fiber Optic Sensing Technology

The present invention is an improved fiber optic sensing system (FOSS) having the ability to provide both high spatial resolution and high frequency strain measurements. The inventive hybrid FOSS fiber combines sensors from high acquisition speed and low spatial resolution Wavelength-Division Multiplexing (WDM) systems and from low acquisition speed and high spatial resolution Optical Frequency Domain Reflection (OFDR) systems. Two unique light sources utilizing different wavelengths are coupled with the hybrid FOSS fiber to generate reflected data from both the WDM sensors and OFDR sensors operating on a single fiber optic cable without incurring interference from one another. The two data sets are then de-multiplexed for analysis, optionally with conventionally-available WDM and OFDR system analyzers.

Parker, Allen R. Jr.↗

Application of the theory of coupled waves for analysis of inclined reflectors in optical waveguides

A new method for analysing the transmission and scattering of the guided TE mode in an inclined reflector located in an optical waveguide is proposed and studied. The reflection of an inhomogeneous optical beam from the inclined reflector is described semi-analytically for the first time by using the theory of coupled waves and taking into account the interrelation and transformation of energy between all the waves of the discrete and continuous spectra of the optical 2D-waveguide (even and odd guided, radiation, and evanescent waves). The results of calculations of the propagation of light through the inclined reflector in the form of a thin (10-500 nm) homogeneous strip obtained by our method and by the finite difference time domain (FDTD) method are in excellent quantitative agreement. The calculation rate of our method considerably (by one-two orders of magnitude) exceeds that of the FDTD method and our method has a better accuracy. (optical waveguides)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast free-carrier dynamics in Cu{sub 2}ZnSnS{sub 4} single crystals studied using femtosecond time-resolved optical spectroscopy

We studied the dynamics of photogenerated carriers in Cu{sub 2}ZnSnS{sub 4} (CZTS) single crystals using femtosecond transient reflectivity (TR) and optical pump-THz probe transient absorption (THz-TA) spectroscopy. The TR and THz-TA decay dynamics consistently showed that free carriers have long lifetimes of up to a few nanoseconds. The excitation-photon-energy-dependent TR measurements revealed a slow picosecond energy relaxation of free carriers to the band edge in CZTS. The relaxation and recombination dynamics of free carriers were affected by nonradiative recombinations at the surface. Our results revealed a global feature of energy relaxation and recombination processes of free carriers in CZTS single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Cirrus Clouds From Multi-pass AVIRIS Data

The optical depth and reflectance from thin cirrus clouds are calculated from two passes of AVIRIS over a scene in Florida. One of the passes contained partial cirrus cover, the other did not. Optical depths of 0.2 were calculated and the reflectance of the cloud at 1.381 micrometers was 0.026 The detection limit for cirrus is approximately an order of magnitude less in reflectance.

Goetz, Alexander F. H.↗

Development of a Multispectral Tissue Characterization System for Optimization of an Implantable Perfusion Status Monitor for Transplanted Liver

Optimizing wavelength selection for monitoring perfusion during liver transplant requires an in-depth characterization of liver optical properties. With these, the impact of liver absorption and scattering properties can be investigated to select optimal wavelengths for perfusion monitoring. To accomplish this, we are developing a single integrating-sphere-based using a unique spatially resolved diffuse reflectance system for optical properties determination for thick samples. We report early results using a monochromatic source implementation to measure the optical properties of well characterized tissue phantoms made from polystyrene spheres and Trypan blue. The presented results show the promise of using this unique system to measure the optical properties of the tissue phantoms. We are currently in the process of implementing an automated Levenberg Marquardt fitting algorithm to determine the peak location of the diffuse reflectance profile to ensure robust computation of sample optical properties. Future work will focus on the incorporation of multispectral capability to the technique to facilitate development of more realistic liver tissue phantoms.

59 BASIC BIOLOGICAL SCIENCES↗

Total Internal Reflection of Two Lasers in a Single Planar Optical Waveguide

Multiplex biomarker quantitation is ideal for tracking the progression of a disease, but sensitive, specific, and quantitative multiplex biosensing remains challenging. We achieved total internal reflection with two lasers in a single planar optical waveguide by coupling 532 nm laser light into the diffraction grating of a waveguide and 635 nm laser light directly into the thin film of the same waveguide. We confirmed that the evanescent fields generated in the waveguide can excite two fluorescent dyes (Alexa Fluor 532 and Alexa Fluor 647) held to the surface of the waveguide through biotin-streptavidin chemistry. This sensing concept holds significant potential as a platform for multiplex biomarker detection.

47 OTHER INSTRUMENTATION↗

Survey and adjustment methods applied on an 11 axes high performance reflectometer for synchrotron radiation

At BESSY-II a new UV-and XUV optics beamline [1] has recently been setup with an in-house developed versatile reflectometer [2], [3], [4] for at-wavelength metrology on reflective and diffractive optical elements up to 4 kg mass. High precision measurements of the reflection and polarization properties are feasible by a 360° azimuthal rotation of the sample around the beam of light, where samples can be adjusted reproducibly with a novel UHV-Tripod within arc sec and μm precision. The azimuthal rotation requires an extremely high precision adjustment of the goniometer axis with respect to the incident light beam. Here we describe sophisticated methods with which we achieve nearly perfect agreement of the azimuthal rotation axis and the synchrotron beam in the 30 arc sec range. By using geodetic instruments (lasertracker, theodolite, autocollimator) the quality of the reflectometer UHV-mechanics has been characterized with respect to stiffness and radial run out with highest precision [5].

43 PARTICLE ACCELERATORS↗