Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Growth and Characterization of Epitaxial FeWO 4 Thin Films with Controlled Oxygen Stoichiometry

Here, we report the growth of single-phase epitaxial FeWO 4 thin films, using plasma-assisted molecular beam epitaxy, and investigate structural, optical, and electronic properties. The FeWO 4 films grow in (100) orientation on c-plane sapphire (0001) substrates and exhibit 3 rotational twin variants where FeWO 4 [001] is aligned to sapphire [100] equivalent in-plane directions. X-ray diffraction measurements indicate that the epitaxial FeWO 4 (100) structure is optimized when 80-100 W of rf power is applied to an atomic oxygen source during growth, yielding films with minimal strain and impurity phases or other orientations. In films grown with 120 W of rf power, FeWO 4 crystallites develop inhomogeneous and homogeneous strains and are potentially contaminated with Fe 3+ oxide phase impurities. In films grown with 60 W of rf power, FeWO 4 crystallites do not form fully epitaxial layers. X-ray photoelectron spectroscopy indicates that the structural changes are correlated with the Fe 3+ /Fe 2+ oxidation state ratio increasing from 0.6-1.4 with rf power from 60-120 W. X-ray fluorescence spectroscopy indicates that the Fe/W composition ratio is also increasing from 1.1-1.8 with rf power from 60-120 W. Ultraviolet and visible optical absorption spectra indicate a 1.8 ± 0.1 eV band gap with an additional interband absorption feature at 3.1 ± 0.1 eV in the 80-100 W films, with similar onsets observed in the 60 W films. In the 120 W films, the higher lying transition is shifted to 2.7 ± 0.1 eV due to the Fe 3+ enrichment. Electrical resistivity decreases over 2 orders of magnitude with oxidation from 10 4 -10 5 Ω cm in 60 W films to 120 ± 10 Ω cm in 120 W films. Thermopower measurements show p-type to n-type conductivity conversion when oxidation states shift from Fe 2+ majority in the 100 W films to Fe 3+ majority in the 120 W films. We conclude that electron polaron hopping driven by Fe 3+ is a dominant transport mechanism and a source of n-type conductivity in overoxidized FeWO 4 films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Persistent dopants and phase segregation in organolead mixed-halide perovskites

Organolead mixed-halide perovskites such as CH 3 NH 3 PbX 3–a X' a (X, X' = I, Br, Cl) are interesting semiconductors because of their low cost, high photovoltaic power conversion efficiencies, enhanced moisture stability, and band gap tunability. Using a combination of optical absorption spectroscopy, powder X-ray diffraction (XRD), and, for the first time, 207 Pb solid state nuclear magnetic resonance (ssNMR), we probe the extent of alloying and phase segregation in these materials. Because 207 Pb ssNMR chemical shifts are highly sensitive to local coordination and electronic structure, and vary linearly with halogen electronegativity and band gap, this technique can provide the true chemical speciation and composition of organolead mixed-halide perovskites. We specifically investigate samples made by three different preparative methods: solution phase synthesis, thermal annealing, and solid phase synthesis. 207 Pb ssNMR reveals that nonstoichiometric dopants and semicrystalline phases are prevalent in samples made by solution phase synthesis. We show that these nanodomains are persistent after thermal annealing up to 200 °C. Further, a novel solid phase synthesis that starts from the parent, single-halide perovskites can suppress phase segregation but not the formation of dopants. Our observations are consistent with the presence of miscibility gaps and spontaneous spinodal decomposition of the mixed-halide perovskites at room temperature. This underscores how strongly different synthetic procedures impact the nanostructuring and composition of organolead halide perovskites. In conclusion, better optoelectronic properties and improved device stability and performance may be achieved through careful manipulation of the different phases and nanodomains present in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthesis and Properties of Bulk Mg 3 WN 4 in a Wurtzite-Derived Structure

Experimental synthesis of theoretically predicted materials with controlled elemental coordination environments can lead to the realization of useful properties, such as facile ion transport or ferroelectric switching. Among such materials are ternary nitrides in the Mg−W−N composition space, where several stable and metastable compounds have been predicted and synthesized recently in bulk and film forms. Here, we report for the first time on the bulk synthesis of Mg 3 WN 4 in a wurtzite-derived crystal structure via a solid-state metathesis reaction. In situ synchrotron powder X-ray diffraction shows how the ion exchange proceeds from Li 6 WN 4 + MgCl 2 precursors to Mg 3 WN 4 + LiCl products, with the reaction starting slowly near 380 °C and completing by 600 °C, including the presence of a competing disordered rocksalt-derived phase (Mg,W)N above 440 °C. The follow-up ex situ powder synthesis at 400 °C for 0.5 h with 10% excess MgCl 2 reveals the cation-ordered nature of the wurtzite-derived Mg 3 WN 4 structure with polar symmetry confirmed by second-harmonic generation measurements. Optical absorption spectra, chemical composition analysis, and electron microscopy imaging suggest that bulk Mg 3 WN 4 obtained via metathesis reaction is prone to defect formation. Overall, this study shows that selective ex situ synthesis of the phase-pure ternary nitrides, informed by in situ measurements, is possible by carefully controlling the thermal budget of the reaction and paves the way toward property characterization of the Mg 3 WN 4 wurtzite-derived material.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Designing and Discovering a New Family of Semiconducting Quaternary Heusler Compounds Based on the 18-Electron Rule

Intermetallic compounds with sizable band gaps are attractive for their unusual properties but rare. In this report, we present a new family of stable semiconducting quaternary Heusler compounds, designed based on the 18-electron rule and discovered by means of high-throughput ab initio calculations based on the 18-electron rule. The 99 new semiconductors reported here adopt the ordered quaternary Heusler structure with the prototype of LiMgSnPd (F4̅3m, No. 216) and contain 18 valence electrons per formula unit. They are realized by filling the void in the half Heusler structure with a small and electropositive atom, i.e., lithium. These new stable quaternary Heusler semiconductors possess band gaps in the range of 0.3 to 2.5 eV, and exhibit some unusual properties different from conventional semiconductors, such as strong optical absorption, giant dielectric screening, and high Seebeck coefficient, which suggest these semiconductors have potential applications as photovoltaic and thermoelectric materials. While this study opens up avenues for further exploration of this novel class of semiconducting quaternary Heuslers, the design strategy used herein is broadly applicable across a potentially wide array of chemistries to discover new stable materials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Defect Engineering of Earth-Abundant Solar Absorbers BiSI and BiSeI

Bismuth-based solar absorbers have recently garnered attention due to their promise as cheap, nontoxic, and efficient photovoltaics. To date, however, most show poor efficiencies far below those seen in commercial technologies. In this work, we investigate two such promising materials, BiSI and BiSeI, using relativistic first-principles methods with the aim of identifying their suitability for photovoltaic applications. Both compounds show excellent optoelectronic properties with ideal band gaps and strong optical absorption, leading to high predicted device performance. Using defect analysis, we reveal the electronic and structural effects that can lead to the presence of deep trap states, which may help explain the prior poor performance of these materials. Crucially, detailed mapping of the range of experimentally accessible synthesis conditions allows us to provide strategies to avoid the formation of killer defects in the future.

14 SOLAR ENERGY↗
DOE OSTI2019

High-throughput Computational Study of Halide Double Perovskite Inorganic Compounds

Double perovskite halides are a class of materials with diverse chemistries that are amenable to solution-based synthesis routes, and display a range of properties for a variety of potential applications. Here, starting from a consideration of the octahedral and tolerance factors of ~2000 candidate double perovskite compounds, we compute structural, electronic, and transport properties of ~1000 using first-principles calculations based on density-functional-theory methods. The computational results have been assembled in a database that is accessible through the Materials Project online. As one potential application, double perovskites are candidates in the search for lead-free halide photovoltaic absorbers. We present the application of our database to aid the discovery of new double perovskite halide photovoltaic materials, by combining the results with optical absorption and phonon stability calculations. From three distinct classes of chemistries, 11 compounds were identified as promising solar absorbers and the complex chemical trends for band gap within each of these are analyzed, to provide guidelines for the use of substitutional alloying as a means of further tuning the electronic structure. Other possible applications of the database are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Surface Termination Dependent Work Function and Electronic Properties of Ti 3 C 2 T x MXene

MXenes, an emerging family of 2D transition metal carbides and nitrides, have shown promise in various applications, such as energy storage, electromagnetic interference shielding, conductive thin films, photonics, and photothermal therapy. Their metallic nature, wide range of optical absorption, and tunable surface chemistry are the key to their success in those applications. The physical properties of MXenes are known to be strongly dependent on their surface terminations. In this study, we investigated the electronic properties of Ti 3 C 2 T x for different surface terminations, as achieved by different annealing temperatures, with the help of photoelectron spectroscopy, inverse photoelectron spectroscopy, and density functional theory calculations. We find that fluorine occupies solely the face-centered cubic adsorption site, whereas oxygen initially occupies at least two different adsorption sites, followed by a rearrangement after fluorine desorption at high annealing temperatures. The measured electronic structure of Ti 3 C 2 T x showed strong dispersion of more than 1 eV, which we conclude to stem from Ti–O bonds by comparing it to calculated band structures. We further measured the work function of Ti 3 C 2 T x as a function of annealing temperature and found that it is in the range of 3.9–4.8 eV, depending on the surface composition. A comparison of the experimental work function to detailed density functional theory calculations shows that the measured value is not simply an average of the work function values of uniformly terminated Ti 3 C 2 surfaces but that the interplay between the different surface moieties and their local dipoles plays a crucial role.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Thin Film Synthesis of Semiconductors in the Mg–Sb–N Materials System

Nitrides feature many interesting properties, such as a wide range of bandgaps suitable for optoelectronic devices including light-emitting diodes (LEDs), and piezoelectric response used in microelectromechanical systems (MEMS). Nitrides are also significantly underexplored compared to oxides and other chemistries, with many being thermochemically metastable, sparking interest from a basic science point of view. This paper reports on experimental and computational exploration of the Mg-Sb-N material system, featuring both metastable materials and semiconducting properties. Using sputter deposition, we discovered a new Mg 2 SbN 3 nitride with a wurtzite-derived crystal structure, and synthesized the antimonide-nitride Mg 3 SbN with an antiperovskite crystal structure for the first time in thin film form. Theoretical calculations indicate that Mg 2 SbN 3 is metastable and has properties relevant to LEDs and MEMS, whereas Mg 3 SbN has a large dielectric constant (28ε o ) and low hole effective masses (0.9m o ), of interest for photovoltaic solar cell absorbers. The experimental solar-matched 1.3 eV optical absorption onset of the Mg 3 SbN antiperovskite agrees with the theoretical prediction (1.3 eV direct, 1.1 eV indirect), and with the measurements of room-temperature near-bandgap photoluminescence. Furthermore, these results make an important contribution towards understanding semiconductor properties and chemical trends in the Mg-Sb-N materials system, paving the way to future practical applications of these novel materials.

14 SOLAR ENERGY↗
DOE OSTI2025

La 3 CuTe 5 : A Narrow-Gap Semiconductor with Indirect Gap and Dual-Regime Thermally Activated Transport

Metal-chalcogenide systems remain a long-standing research topic because of their structural diversity and potential to host emergent phenomena. Here, we report a new compound, La 3 CuTe 5 , synthesized from the halide-flux method. Single-crystal X-ray diffraction studies indicate the structure to be unique among reported ones. Here, the compound crystallizes in a novel structure type adopting the orthorhombic space group Pnma and a unit cell of a = 24.3947(14) Å, b = 4.4232(2) Å, and c = 10.2142(5) Å. The tetrahedral [CuTe 4 ] building blocks form chains along [010] by corner sharing and link [LaTe 7 ] and [LaTe 8 ] polyhedra via edge sharing, resulting in a three-dimensional bulk structure. Thermal analysis results indicate that the material remains stable with a temperature up to 950 °C and decomposable at 1400 °C. First-principles calculations reveal an indirect electronic band gap and flat valence bands dominated by Te p and Cu d states. Optical absorption measurements yield a band gap of ∼0.65 eV, consistent with semiconducting behavior observed in transport measurements. Fittings to the temperature-dependent resistivity reveal two thermally activated regimes associated with Arrhenius-type conduction and three-dimensional variable range hopping, respectively.

Chalcogenides↗
DOE OSTI2017

A -Site Ordered Double Perovskite CaMnTi 2 O 6 as a Multifunctional Piezoelectric and Ferroelectric–Photovoltaic Material

The double perovskite CaMnTi 2 O 6 , is a rare A site ordered perovskite oxide that exhibits a sizable ferroelectric polarization and relatively high Curie temperature. Using first-principles calculations combined with detailed symmetry analyses, we identify the origin of the ferroelectricity in CaMnTi 2 O 6 . We further explore the material properties of CaMnTi 2 O 6 , including its ferroelectric polarization, dielectric and piezoelectric responses, magnetic order, electronic structure, and optical absorption coefficient. It is found that CaMnTi 2 O 6 exhibits room-temperature-stable ferroelectricity and moderate piezoelectric responses. Moreover, CaMnTi 2 O 6 is predicted to have a semiconducting energy band gap similar to that of BiFeO 3 , and its band gap can further be tuned-via distortions of the planar Mn-O bond lengths. CaMnTi 2 O 6 exemplifies a new class of single-phase semiconducting ferroelectric perovskites for potential applications in ferroelectric photovoltaic solar cells.

14 SOLAR ENERGY↗
DOE OSTI2019

Rb 4 Ag 2 BiBr 9 : A Lead-Free Visible Light Absorbing Halide Semiconductor with Improved Stability

Replacement of the toxic heavy element lead in metal halide perovskites has been attracting a great interest because the high toxicity and poor air stability are two of the major barriers for their widespread utilization. Recently, mixed-cation double perovskite halides, also known as elpasolites, were proposed as an alternative lead-free candidate for the design of nontoxic perovskite solar cells. Herein, we report a new nontoxic and air stable lead-free all-inorganic semiconductor Rb 4 Ag 2 BiBr 9 prepared using the mixed-cation approach; however, Rb 4 Ag 2 BiBr 9 adopts a new structure type (Pearson’s code o P 32) featuring BiBr 6 octahedra and AgBr 5 square pyramids that share common edges and corners to form a unique 2D layered non-perovskite structure. Rb 4 Ag 2 BiBr 9 is also demonstrated to be thermally stable with the measured onset decomposition temperature of T o = 520 °C. Optical absorption measurements and density functional theory calculations suggest a nearly direct band gap for Rb 4 Ag 2 BiBr 9 . Room temperature photoluminescence (PL) measurements show a broadband weak emission. Furthermore, temperature-dependent and power-dependent PL measurements show a strong competition between multiple emission centers and suggest the coexistence of defect-bound excitons and self-trapped excitons in Rb 4 Ag 2 BiBr 9 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Hybrid Charge-Transfer Semiconductors: (C 7 H 7 )SbI 4 , (C 7 H 7 )BiI 4 , and Their Halide Congeners

Hybrid metal halides yield highly desirable optoelectronic properties and offer significant opportunity due to their solution processability. This contribution reports a new series of hybrid semiconductors, (C 7 H 7 )MX 4 (M = Bi 3+ , Sb 3+ ; X = Cl – , Br – , I – ), that are composed of edge-sharing MX 6 chains separated in space by π-stacked tropylium (C 7 H 7 + ) cations; the inorganic chains resemble the connectivity of BiI 3 . The Bi 3+ compounds have blue-shifted optical absorptions relative to the Sb 3+ compounds that span the visible and near-IR region. Consistent with observations, DFT calculations reveal that the conduction band is composed of the tropylium cation and valence band primarily the inorganic chain: a charge-transfer semiconductor. The band gaps for both Bi 3+ and Sb 3+ compounds decrease systematically as a function of increasing halide size. Furthermore these compounds are a rare example of charge-transfer semiconductors that also exhibit efficient crystal packing of the organic cations, thus providing an opportunity to study how structural packing affects optoelectronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2019

From Thorium to Plutonium: Trends in Actinide(IV) Chloride Structural Chemistry

A series of eighteen actinide (IV) compounds were synthesized from acidic aqueous media containing thorium, uranium, or plutonium. The metal cation adopts a variety of different structural units with the general formula [An(H 2 O) x Cl y ] 4-y (x=4-7, y=2-4) or AnCl 6 2- charge balanced by protonated nitrogen-containing heterocycles. Compound identities were classified by single crystal X-ray diffraction and subsequently characterized by Raman, IR, and optical absorption spectroscopies. Discrepancies across the early actinides were observed in this family of An(IV)-chlorides, with Th adopting exclusively Th-aquo-chloro species, Pu forming only PuCl 6 2- , and U residing somewhere in between, crystallizing both as U-aquo-chloro and UCl 6 2- monomeric units. Reports of An-H 2 O-Cl species are largely absent from tetravalent An solid state discussions despite their identification in chloride solutions. Here, the isolation of unique An(IV)-chlorides may be attributed to nonbonding interactions provided by outer coordination sphere counter-ions that could play a role in stabilizing these structural units. Differences in the structural chemistry of Th, U, and Pu also demonstrate a break in the series despite their common oxidation state and nearly identical synthetic procedures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Extracting Inelastic Scattering Cross Sections for Finite and Aperiodic Materials from Electronic Dynamics Simulations

Explicit time-dependent electronic structure theory methods are increasingly prevalent in the areas of condensed matter physics and quantum chemistry, with the broad-band optical absorptivity of molecular and small condensed-phase systems nowadays routinely studied with such approaches. Here, in this paper, it is demonstrated that electronic dynamics simulations can similarly be employed to study cross sections for the scattering-induced electronic excitations probed in nonresonant inelastic X-ray scattering and momentum-resolved electron energy loss spectroscopies. A method is put forth for evaluating the electronic dynamic structure factor, which involves the application of a momentum boost-type perturbation and transformation of the resulting reciprocal space density fluctuations into the frequency domain. Good agreement is first demonstrated between the dynamic structure factor extracted from these electronic dynamics simulations and the corresponding transition matrix elements from linear response theory. The method is then applied to some extended (quasi)one-dimensional systems, for which the wave vector becomes a good quantum number in the thermodynamic limit. Finally, the dispersion of many-body excitations in a series of hydrogen-terminated graphene flakes (and twisted bilayers thereof) is investigated to highlight the utility of the presented approach for capturing morphology-dependent effects in the inelastic scattering cross sections of nanostructured and/or noncrystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Excited State Properties of Point Defects in Semiconductors and Insulators Investigated with Time-Dependent Density Functional Theory

Here, we present a formulation of spin-conserving and spin-flip hybrid time-dependent density functional theory (TDDFT), including the calculation of analytical forces, which allows for efficient calculations of excited state properties of solid-state systems with hundreds to thousands of atoms. We discuss an implementation on both GPU- and CPU-based architectures along with several acceleration techniques. We then apply our formulation to the study of several point defects in semiconductors and insulators, specifically the negatively charged nitrogen-vacancy and neutral silicon-vacancy centers in diamond, the neutral divacancy center in 4H silicon carbide, and the neutral oxygen-vacancy center in magnesium oxide. Our results highlight the importance of taking into account structural relaxations in excited states in order to interpret and predict optical absorption and emission mechanisms in spin defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

GPU-Accelerated Solution of the Bethe–Salpeter Equation for Large and Heterogeneous Systems

We present a massively parallel GPU-accelerated implementation of the Bethe–Salpeter equation (BSE) for the calculation of the vertical excitation energies (VEEs) and optical absorption spectra of condensed and molecular systems, starting from single-particle eigenvalues and eigenvectors obtained with density functional theory. The algorithms adopted here circumvent the slowly converging sums over empty and occupied states and the inversion of large dielectric matrices through a density matrix perturbation theory approach and a low-rank decomposition of the screened Coulomb interaction, respectively. Further computational savings are achieved by exploiting the nearsightedness of the density matrix of semiconductors and insulators to reduce the number of screened Coulomb integrals. We scale our calculations to thousands of GPUs with a hierarchical loop and data distribution strategy. The efficacy of our method is demonstrated by computing the VEEs of several spin defects in wide-band-gap materials, showing that supercells with up to 1000 atoms are necessary to obtain converged results. We discuss the validity of the common approximation that solves the BSE with truncated sums over empty and occupied states. In conclusion, we then apply our GW-BSE implementation to a diamond lattice with 1727 atoms to study the symmetry breaking of triplet states caused by the interaction of a point defect with an extended line defect.

Absorption spectra↗
DOE OSTI2022

Photophysical Properties and Electronic Structure of Hydroporphyrin Dyads Exhibiting Strong Through-Space and Through-Bond Electronic Interactions

Electronic interactions between tetrapyrroles are utilized in natural photosynthetic systems to tune the light-harvesting and energy/charge-transfer processes in these assemblies. Such interactions also can be employed to tailor the electronic properties of tetrapyrrolic dyads and larger arrays for use in materials science and biomedical research. Here we have utilized static and time-resolved optical spectroscopy to characterize the optical absorption and emission properties of a set of chlorin and bacteriochlorin dyads with varied degrees of through-bond (TB) and through-space (TS) interactions between the constituent macrocycles. The dyads consist of two chlorins or two bacteriochlorins joined by a linker that utilizes a triple-double-triple bond (enediyne) motif in which the double bond portion is a ester-substituted ethylene or o-phenylene unit. The photophysical studies are coupled with density functional theory (DFT) calculations to probe the ground-state molecular orbital (MO) characteristics of the dyads and time-dependent calculations (TDDFT) to elucidate excited-state properties. The latter include electronic characteristics of the singlet excited state manifold and the absorption transitions to these states from the electronic ground state. Comparison of the MO and calculated spectral properties of each dyad with the linker present versus disrupted (by eliminating the double-bond portion) gives insight into the relative contributions of TB versus TS interactions to the electronic properties of the dyads. The results show that the TB and TS contributions are additive (constructively interfere), which is not always the case for molecular dyads. Most of the dyads have shorter lifetimes of the lowest singlet excited state compared to the parent monomer, which derives from increased S 1 → S 0 internal conversion. The enhancement is greater for the dyads in benzonitrile than in toluene. Furthermore, the studies provide insights into the nature of the electronic interactions between the constituents in the tetrapyrrole arrays and how these interactions dictate the spectral properties and excited-state decay characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Iodine in Metal–Organic Frameworks at High Pressure

Capture of highly volatile radioactive iodine is a promising application of metal–organic frameworks (MOFs), thanks to their high porosity with flexible chemical architecture. Specifically, strong charge-transfer binding of iodine to the framework enables efficient and selective iodine uptake as well as its long-term storage. As such, precise knowledge of the electronic structure of iodine is essential for a detailed modeling of the iodine sorption process, which will allow for rational design of iodophilic MOFs in the future. Here we probe the electronic structure of iodine in MOFs at variable iodine···framework interaction by Raman and optical absorption spectroscopy at high pressure (P). The electronic structure of iodine in the straight channels of SBMOF-1 (Ca- sdb , sdb = 4,4'-sulfonyldibenzoate) is modified irreversibly at P > 3.4 GPa by charge transfer, marking a polymerization of iodine molecules into a 1D polyiodide chain. In contrast, iodine in the sinusoidal channels of SBMOF-3 (Cd- sdb ) retains its molecular (I 2 ) character up to at least 8.4 GPa. Such divergent high-pressure behavior of iodine in the MOFs with similar port size and chemistry illustrates adaptations of the electronic structure of iodine to channel topology and strength of the iodine···framework interaction, which can be used to tailor iodine-immobilizing MOFs.

36 MATERIALS SCIENCE↗