Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Formation of turing patterns in strongly magnetized electric discharges

Abstract Pattern formation and self-organization in many biological and non-biological systems can be explained through Turing’s activator-inhibitor model. Here we show how this model can be employed to describe the formation of filamentary structures in a low-pressure electric discharge exposed to a strong magnetic field. Theoretical investigation reveals that the fluid equations describing a magnetized plasma can be rearranged to take the mathematical form of Turing’s activator-inhibitor model. Numerical simulations based on the equations derived from this approach could reproduce the various patterns observed in the experiments. Also, it is shown that a density imbalance between electrons and ions exists in the bulk of the magnetized plasma that generates an electric field structure transverse to the applied magnetic field. This electric field is responsible for the stability of the filamentary patterns in the magnetized plasma over time scales much longer than the characteristic time scales of the electric discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Installation of a fast framing visible camera on KSTAR

Visible camera technologies have made remarkable progress in recent years, and the fast camera has proven itself to be a capable imaging diagnostic in studies of specific fusion plasma issues such as the start-up physics, plasma wall interactions, edge-localized modes, and disruptions. For the purpose of favorable visible imaging, a fast framing camera has recently been installed on the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The camera uses a complementary metal-oxide semiconductor detector with a maximum resolution of 1280x1024 at 1000 frames/s (fps) and a minimum resolution of 1280x16 at 64 kfps. A 2-m-long viewport having a novel optical rail system was installed on a tangential port to view the tokamak interior. The system is fully controlled from the main control room and protected by a shutter from deposits. To verify that the camera electronics are safe from the high magnetic field and its rapid time variation, possible influences are considered theoretically and experimentally. In this work, we present the design and installation of the fast camera system on the KSTAR device with discussions on the field variation effect issues.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Wavelength-detuning cross-beam energy transfer mitigation scheme for direct drive: Modeling and evidence from National Ignition Facility implosions

Here, cross-beam energy transfer (CBET) results from two-beam energy exchange via seeded stimulated Brillouin scattering, which detrimentally reduces laser-energy absorption for direct-drive inertial confinement fusion. Consequently, ablation pressure and implosion velocity suffer from the decreased absorption, reducing target performance in both symmetric and polar direct drive. Additionally, CBET alters the time-resolved scattered-light spectra and redistributes absorbed and scattered-light–changing shell morphology and low-mode drive symmetry. Mitigating CBET is demonstrated in inertial confinement implosions at the National Ignition Facility by detuning the laser-source wavelengths (±2.3 Å UV) of the interacting beams. In polar direct drive, wavelength detuning was shown to increase the equatorial region velocity experimentally by 16% and to alter the in-flight shell morphology. These experimental observations are consistent with design predictions of radiation–hydrodynamic simulations that indicate a 10% increase in the average ablation pressure. These results indicate that wavelength detuning successfully mitigates CBET. Simulations predict that optimized phase plates and wavelength-detuning CBET mitigation utilizing the three-legged beam layout of the OMEGA Laser System significantly increase absorption and achieve >100-Gbar hot-spot pressures in symmetric direct drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of bootstrap current and Landau-fluid closure on ELM crashes and transport

Results presented here are from 6-field Landau-Fluid simulations using shifted circular cross-section tokamak equilibria on BOUT++ framework. Linear benchmark results imply that the collisional and collisionless Landau resonance closures make a little difference on linear growth rate spectra which are quite close to the results with the flux limited Spitzer-Härm parallel flux. Both linear and nonlinear simulations show that the plasma current profile plays dual roles on the peeling-ballooning modes that it can drive the low-n peeling modes and stabilize the high-n ballooning modes. For fixed total pressure and current, as the pedestal current decreases due to the bootstrap current which becomes smaller when the density (collisionality) increases, the operational point is shifted downwards vertically in the J ped – α diagram, resulting in threshold changes of different modes. In conclusion, the bootstrap current can slightly increase radial turbulence spreading range and enhance the energy and particle transports by increasing the perturbed amplitude and broadening cross-phase frequency distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear analyses of peeling-ballooning modes in high beta pedestal plasmas

We present the linear simulations of edge plasma instabilities using the 3-field peeling-ballooning model and gyro-Landau-fluid model under the BOUT++ framework. A series of realistic equilibria of shifted circular geometry are generated by a global equilibrium solver CORSICA, where the Shafranov shift, elongation effects, and bootstrap current are included. The linear growth rate spectrum of the peeling-ballooning modes is shown in a wide range of pressure gradient and parallel current density in the pedestal region. The results show that the bootstrap current stabilizes high beta ballooning modes. Here, the simulations with different fractions of bootstrap current indicate a trend for the existence of the high beta peeling-ballooning mode stability region. Taking the kinetic effects into account, the linear simulations of kinetic peeling-ballooning mode using the gyro-Landau-fluid model show that this region can be accessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic effects on neutron generation in moderately collisional interpenetrating plasma flows

Collisional kinetic modifications of ion distributions in interpenetrating flows are investigated by irradiating two opposing targets, either CD/CD or CD/CH, on the National Ignition Facility. In the CD/CD case, neutron time-of-flight diagnostics are successfully used to infer the ion temperature, 5–6 keV, and velocity, 500 km/s per flow, of the flows using a multi-fluid approximation of beam-beam nuclear fusion. These values are found to be in agreement with simulations and other diagnostics. However, for CD/CH, the multi-fluid assumption breaks down, as fusion is quasi-thermonuclear in this case and thus more dependent on the details of the ion velocity distribution. Using kinetic-ion, hydrodynamic-electron, and hybrid particle-in-cell modeling, this is found to be partially due to a skewed deviation from a Maxwellian in the ion velocity distribution function resulting from ion-ion collisions. This skew causes a downshift in the mean neutron velocity that partially resolves the observation in the CD/CH case. Finally, we note that the discrepancy is not completely resolved via collisional effects alone and may be a signature of collisionless electromagnetic interactions such as the Weibel-filamentation instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser propagation in a subcritical foam: Ion and electron heating

We develop a model for laser propagation and heating in a subcritical foam (homogeneous electron density as a fraction of critical n e,0 /n c <1). Our model describes the partition of energy between ions and electrons in an expanding foam element irradiated by a laser, and we solve for the plasma conditions generated by burning down the foam microstructure. We find that a substantial fraction of laser energy goes into breaking down and homogenizing the foam microstructure, which slows down the laser heat front. We also find that the ion temperature in a plasma generated by burning down a foam can exceed the electron temperature. This is because laser energy is deposited into the expansion kinetic energy of ions as the foam microstructure burns down explosively. The higher ion temperature increases ion-acoustic wave damping which reduces stimulated Brillouin scattering (SBS). We test our model against data from an experiment that shot a subcritical foam with a high intensity laser pulse on the Janus laser facility at LLNL. We find that by modeling the effect of the foam microstructure, we can explain both the experimentally measured laser propagation velocity and the backscattered SBS power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-coherent mode simulation during inter-ELM period in HL-2A

We have performed linear and nonlinear simulations to study the drive mechanism of the quasi-coherent modes (QCM) during the inter-edge localized mode period in HL-2A. With an unstable Resistive-Ballooning mode from linear simulations, the nonlinear simulation has successfully reproduced the QCM inside the separatrix at the outer mid-plane. The poloidal wave number and frequency from fluctuation analysis are almost the same as the experimental results. The phase shift between the electrical potential and the density fluctuation matches. Linear and nonlinear global profile scans show that the QCM is triggered by the density gradient. Based on these scans, some other experimental observations of the QCM are explained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-consistent simulation of transport and turbulence in tokamak edge plasma by coupling SOLPS-ITER and BOUT++

The status of coupling the fluid plasma/neutral 2D transport code SOLPS-ITER and the fluid 3D turbulence code BOUT++ is reported. Both codes simulated the same region, which is from several cm inside the magnetic separatrix to the far scrape-off layer (SOL). Compared to the profile evolution time scale, the characteristic time scale of the turbulence is quite short. For the turbulence code BOUT++, the time scale is around 10 -6 s. However, for the transport code SOLPS-ITER, the time scale is around 10 -3 –10 -2 s. An iterative scheme is used that each system is evolved on its own characteristic time scale. SOLPS-ITER can provide the background profiles of density, ion, and electron temperature to BOUT++. In turn, BOUT++ can provide the corresponding radial transport coefficients to SOLPS-ITER. The coupling has involved the ion density, ion temperature, and electron temperature. After several steps of iteration, the profiles of density, ion, and electron temperature show fluctuations, and the differences of the changes between two consecutive profiles are getting smaller and smaller. Finally, the self-consistent solutions of turbulence and transport can be obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transition from ion-coupled to electron-only reconnection: Basic physics and implications for plasma turbulence

Here using 2.5 dimensional kinetic particle-in-cell simulations, we simulate reconnection conditions appropriate for the magnetosheath and solar wind, i.e., plasma beta (ratio of gas pressure to magnetic pressure) greater than 1 and low magnetic shear (strong guide field). Changing the simulation domain size, we find that the ion response varies greatly. For reconnecting regions with scales comparable to the ion inertial length, the ions do not respond to the reconnection dynamics leading to “electron-only” reconnection with very large quasisteady reconnection rates. Note that in these simulations, the ion Larmor radius is comparable to the ion inertial length. Moreover, the transition to a more traditional “ion-coupled” reconnection is gradual as the reconnection domain size increases, with the ions becoming frozen-in in the exhaust when the magnetic island width in the normal direction reaches many ion inertial lengths. During this transition, the quasisteady reconnection rate decreases until the ions are fully coupled, ultimately reaching an asymptotic value. The scaling of the ion outflow velocity with the exhaust width during this electron-only to ion-coupled transition is found to be consistent with a theoretical model of a newly reconnected field line. In order to have a fully frozen-in ion exhaust with ion flows comparable to the reconnection Alfvén speed, an exhaust width of at least several ion inertial lengths is needed. In turbulent systems with reconnection occurring between magnetic bubbles associated with fluctuations, using geometric arguments, we estimate that fully ion-coupled reconnection requires magnetic bubble length scales of at least several tens of ion inertial lengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Demonstration of an x-ray Raman spectroscopy setup to study warm dense carbon at the high energy density instrument of European XFEL

We present a proof-of-principle study demonstrating x-ray Raman Spectroscopy (XRS) from carbon samples at ambient conditions in conjunction with other common diagnostics to study warm dense matter, performed at the high energy density scientific instrument of the European x-ray Free Electron Laser (European XFEL). We obtain sufficient spectral resolution to identify the local structure and chemical bonding of diamond and graphite samples, using highly annealed pyrolytic graphite spectrometers. Due to the high crystal reflectivity and XFEL brightness, we obtain signal strengths that will enable accurate XRS measurements in upcoming pump–probe experiments with a high repetition-rate, where the samples will be pumped with high-power lasers. Molecular dynamics simulations based on density functional theory together with XRS simulations demonstrate the potential of this technique and show predictions for high-energy-density conditions. Our setup allows simultaneous implementation of several different diagnostic methods to reduce ambiguities in the analysis of the experimental results, which, for warm dense matter, often relies on simplifying model assumptions. The promising capabilities demonstrated here provide unprecedented insights into chemical and structural dynamics in warm dense matter states of light elements, including conditions similar to the interiors of planets, low-mass stars, and other celestial bodies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deterministic scattering of relativistic electron beams by off-resonant circularly polarized electromagnetic waves

A mechanism is presented whereby relativistic electron beams localized in phase space are deterministically scattered by coherent circularly polarized electromagnetic waves without stochastic processes. It is shown via an exact single-particle analysis that the condition for maximal scattering is an off-resonant condition, contrary to previous kinetic analyses that predict maximal diffusion or interaction at exact resonance or its harmonics. The mechanism, verified by single-particle simulations, enables a fast, nonlinear redistribution of the beam particles. A possible application of this mechanism to runaway electron suppression is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear stability analysis via simulated annealing and accelerated relaxation

Simulated annealing (SA) is a kind of relaxation method for finding equilibria of Hamiltonian systems. A set of evolution equations is solved with SA, which is derived from the original Hamiltonian system so that the energy of the system changes monotonically while preserving Casimir invariants inherent to noncanonical Hamiltonian systems. The energy extremum reached by SA is an equilibrium. Since SA searches for an energy extremum, it can also be used for stability analysis when initiated from a state where a perturbation is added to an equilibrium. The procedure of the stability analysis is explained, and some examples are shown. Because the time evolution is computationally time consuming, efficient relaxation is necessary for SA to be practically useful. An acceleration method is developed by introducing time dependence in the symmetric kernel used in the double bracket, which is part of the SA formulation described here. An explicit formulation for low-beta reduced magnetohydrodynamics (MHD) in cylindrical geometry is presented. In conclusion, since SA for low-beta reduced MHD has two advection fields that relax, it is important to balance the orders of magnitude of these advection fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using tabulated NLTE data for Hohlraum simulations

Non-local thermodyamic equilibrium (NLTE) atomic kinetics is necessary in inertial confinement fusion Hohlraum simulations for adequately modeling high-Z walls and dopants but is computationally very expensive. We present here an approach for tabulating NLTE material data in an economical manner. Material properties for an arbitrary radiation field are provided through tabulated data for a limited set of radiation fields plus derivatives with respect to components of those radiation fields. We have implemented this method in a radiation-hydrodynamics code and compare Hohlraum simulations done with inline NLTE calculations with those done with tables constructed from the same atomic data. The results demonstrate that NLTE tables can replace inline calculations in Hohlraum simulations without a significant loss of accuracy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-ideal MHD growth of current interchange tearing modes at plasma edge and response to externally-imposed flow

Current interchange tearing modes (CITMs) have been proposed to explain an intermittent eruption of electric current toward a divertor at an edge region of a tokamak device. Extended magnetohydrodynamic (MHD) simulations combined with the Scrape-Off-Layer diffusion model, which has been developed by the authors [Miura et al., Phys. Plasmas 24, 092111 (2017)], are carried out in order to study the growth of a CITM under influences of two-fluid and gyro-viscous effects, or non-ideal MHD effects. Numerical simulations both with and without an externally imposed azimuthal flow show that the growth of a CITM is observed for a relatively small flow velocity, and that a CITM can be a candidate mechanism for the intermittent eruption of the current in a tokamak, whether the growth is under influences of non-ideal MHD effects or not. Here, the growth can be suppressed when an externally imposed azimuthal flow is sufficiently large to cause a finite radial displacement because such a displacement prevents a transition from an interchange to a tearing mode that is the key process of a CITM. Furthermore, it is also found that a stripe pattern similar to so-called streamers is formed in the course of the CITM growth. The basic nature of this streamer-like structure is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and analysis of dudded fuel experiments at the National Ignition Facility

Recent experiments conducted at the National Ignition Facility (NIF) within the past 2 years have achieved the burning plasma state and exceeded the Lawson criterion for the first time in the laboratory. Here, we report on a set of experiments where the deuterium and tritium (DT) ice layers were replaced with dudded tritium, hydrogen, and deuterium (THD) fuel mixtures to remove the influence of alpha-heating on hot spot dynamics. The hot spot compression and yield in the absence of alpha particle self-heating were measured to assess the proximity of NIF implosions toward the ignition cliff. We find that the “burn-off” Lawson parameters χnoα inferred from the THD experiments are in good agreement with the inferences from postshot simulations of the DT-layered implosions. The THD for burning plasma shot N210307 yielded χnoα≈0.88±0.03 while the THD for ignition shot N210808 yielded χnoα≈1.04±0.04. These results also provide important context for the observed variability in the repeat attempts of ignition shot N210808 since implosions on the ignition cliff are expected to exhibit very large variations in the fusion yield from small changes in the initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simultaneous analysis of collinear neutron time-of-flight (nToF) traces applied to pulsed fusion experiment

On pulsed fusion experiments, the neutron time of flight (nToF) diagnostic provides critical information on the fusion neutron energy spectrum. This work presents an analysis technique that uses two collinear nToF detectors, potentially to measure nuclear bang time and directional flow velocities. Two collinear detectors may be sufficient to disambiguate the contributions of nuclear bang time and directional flow velocities to the first moment of the neutron energy spectrum, providing an independent measurement of nuclear bang time. In conclusion, preliminary results from measured nToF traces on the National Ignition Facility and additional applications of this technique are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗