Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RADIAL PROFILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Evolution of discontinuous solutions to transport equations in stellarators

It was shown earlier that, in the range of rare collisions, transport equations for stellarators allow steady discontinuous solutions for the ambipolar electric field and for the plasma density and temperature gradients. Moreover, such solutions are non-single-valued; that is, their explicit form depends on the initial values of the ambipolar electric field. The time-independent transport equations are derived under the conventional quasineutrality condition; i.e., it is assumed that the electron and ion densities, N{sub e} and N{sub i}, are related by the relationship N{sub e} = ZN{sub i} (where Z is the ion charge number). In other words, the plasma charge density is assumed to be much less than the product e{sub i}N{sub i}. Under typical conditions, the corresponding inequality is satisfied by a large margin. However, if the electric field E has discontinuities, then it can be seen from the equation {nabla}.E = 4{pi}{rho} that, at the discontinuity points, the charge density becomes infinite and the relationship N{sub e} = ZN{sub i} fails to hold, so it is necessary to replace it with N{sub e} = ZN{sub i} + {rho}/e{sub e}. In the transport equations, this latter replacement produces additional terms, proportional to the second radial derivative of the field E. With these additional terms, the steady solutions are modified substantially. First, the ambipolar field and the derivatives of the density and temperatures all become continuous functions of the coordinates, a result that seems to be quite obvious. The second, not-so-obvious result is that the steady solutions become single-valued, i.e., independent of the initial values of the ambipolar electric field. It turns out that, in this case, two regimes are possible, depending on the values of the plasma parameters. In the first regime, the solution is unique and is independent of the initial conditions. In the second regime, two steady solutions can exist, depending on the initial conditions. One of the solution is similar to that obtained in the first regime, and the other differs from the first one both in the ambipolar field profile and in the dependence of the density and temperatures on the minor plasma radius. It cannot be excluded that different plasma confinement modes revealed in experiments are associated with the existence of such solutions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Perturbed Ion Temperature and Toroidal Flow Profile Measurements in Rotating Neoclassical Tearing Mode Magnetic Islands

The perturbed ion temperature and toroidal flow were measured in rotating Neoclassical Tearing Modes (NTM) in a tokamak for the first time. These toroidally and radially resolved profiles were obtained by impurity ion spectroscopy in a 2,1 NTM in DIII-D. In agreement with drift-kinetic simulations, the electron temperature profile is flat, while the ion temperature gradient is restored across the magnetic island O-point in the presence of fast ions; the perturbed flow has minima in the O-points and maxima at the X-points. Furthermore, these measurements provide the first confirmation of the theoretically expected ion temperature and flow response to a magnetic island needed to predict the NTM on set threshold scaling for ITER and other future tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of geometry on linear and non-linear gyrokinetic simulations, and development of a global version of the GENE code

Using an interface with the ideal MHD equilibrium code CHEASE, numerical simulations are performed in realistic Tokamak geometry with the gyrokinetic flux tube code GENE. As a starting point in view of a more general study of geometrical effects on various types of micro-turbulence, elongation and triangularity scans are carried out in the ITG regime. In particular, the main dependence of the linear growth rate on elongation is identified to result from the modification of the spatial profile gradients. Non-linear simulations have also been performed, and the influence of geometry on the Dimits shift has been investigated. In order to address the issue of non-local effects in turbulent transport, some of the standard flux tube assumptions are being released in the GENE code, which will thus be extended to allow for radial variations of the equilibrium quantities. The current state of this code development is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First results obtained from the soft x-ray pulse height analyzer on experimental advanced superconducting tokamak

An assembly of soft x-ray pulse height analyzer system, based on silicon drift detector (SDD), has been successfully established on the experimental advanced superconducting tokamak (EAST) to measure the spectrum of soft x-ray emission (E=1-20 keV). The system, including one 15-channel SDD linear array, is installed on EAST horizontal port C. The time-resolved radial profiles of electron temperature and K{sub {alpha}} intensities of metallic impurities have been obtained with a spatial resolution of around 7 cm during a single discharge. It was found that the electron temperatures derived from the system are in good agreement with the values from Thomson scattering measurements. The system can also be applied to the measurement of the long pulse discharge for EAST. The diagnostic system is introduced and some typical experimental results obtained from the system are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulations of heat fluxes in an ELMy H-mode discharge on HL-2A

In order to study the distribution and evolution of the transient heat flux on HL-2A during edge-localized-mode (ELM) bursts, the BOUT++ electromagnetic six-field two-fluid model is used to simulate the pedestal collapse under the lower single-null divertor geometry. The equilibrium profiles of HL-2A ELMy H-mode discharge No. 24 953 are adopted as the initial condition in the original case. In this instance, linear analysis shows that the resistive ballooning mode (RBM) and drift-Alfven wave are unstable to this equilibrium, and RBM is the dominant instability. The evolutions of the radial heat fluxes at the outer mid-plane and heat fluxes to the inner and outer targets during the ELM event are presented. Six more equilibria are constructed based on the original case to find out the influence of the pedestal profiles on the peak electron heat flux. The results indicate that the heat flux increases with temperature and/or density, and the theoretical analysis and simulation results consistently show that the heat flux q ∥e is proportional to n e0,SEP $T^{\frac32}_{e0,SEP}$.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluid Modeling of an ELMing H-mode and a RMP H-mode

In this paper, we investigate the role of wall conditions during the density pump-out observed in Resonant Magnetic Perturbation (RMP) experiments. We use a 2D fluid code, coupled to a neutral Monte-Carlo code (SOLPS5) to model a reference ELMing H-mode. Next we modify either the recycling at the target plates or the pumping efficiency at the pump entrance. This causes a change in upstream profiles, that alone cannot account for the shape change observed in the RMP H-mode. Therefore, the radial transport must be altered to match the RMP H-mode. By comparing the transport model for the ELMing H-mode and the RMP H-mode, we show that inside the separatrix an increase in transport is necessary to model the effects of the applied perturbed field in RMP H-mode. (C) 2009 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the radial onset of clumping in the wind of the B0I massive star QV NOR

We present an analysis of a 78 ks Chandra high-energy transmission gratings observation of the B0I star QV Nor, the massive donor of the wind-accreting pulsar 4U1538−52. The neutron star (NS) orbits its companion in a very close orbit (r<1.4R{sub ∗}, in units of the stellar radii), thereby allowing probing of the innermost wind regions. The flux of the Fe Kα line during eclipse reduces to only ∼30% of the flux measured out of eclipse. This indicates that the majority of Fe fluorescence must be produced in regions close to the NS, at distances smaller than 1R{sub ∗} from its surface. The fact that the flux of the continuum decreases to only ∼3% during eclipse allows for a high contrast of the Fe Kα line fluorescence during eclipse. The line is not resolved and centered at λ=1.9368{sub −0.0018}{sup +0.0032} Å. From the inferred plasma speed limit of v<c((Δλ)/λ)<800 km s{sup −1} and range of ionization parameters of logξ=[−1,2], together with the stellar density profile, we constrain the location of the cold, dense material in the stellar wind of QV Nor using simple geometrical considerations. We then use the Fe Kα line fluorescence as a tracer of wind clumps and determine that these clumps in the stellar wind of QV Nor (B0I) must already be present at radii r<1.25R{sub ∗}, close to the photosphere of the star.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-linear magnetohydrodynamic modeling of plasma response to resonant magnetic perturbations

The interaction of static Resonant Magnetic Perturbations (RMPs) with the plasma flows is modeled in toroidal geometry, using the non-linear resistive MHD code JOREK, which includes the X-point and the scrape-off-layer. Two-fluid diamagnetic effects, the neoclassical poloidal friction and a source of toroidal rotation are introduced in the model to describe realistic plasma flows. RMP penetration is studied taking self-consistently into account the effects of these flows and the radial electric field evolution. JET-like, MAST, and ITER parameters are used in modeling. For JET-like parameters, three regimes of plasma response are found depending on the plasma resistivity and the diamagnetic rotation: at high resistivity and slow rotation, the islands generated by the RMPs at the edge resonant surfaces rotate in the ion diamagnetic direction and their size oscillates. At faster rotation, the generated islands are static and are more screened by the plasma. An intermediate regime with static islands which slightly oscillate is found at lower resistivity. In ITER simulations, the RMPs generate static islands, which forms an ergodic layer at the very edge (ψ≥0.96) characterized by lobe structures near the X-point and results in a small strike point splitting on the divertor targets. In MAST Double Null Divertor geometry, lobes are also found near the X-point and the 3D-deformation of the density and temperature profiles is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neoclassical transport simulations for stellarators

The benchmarking of the thermal neoclassical transport coefficients is described using examples of the Large Helical Device (LHD) and TJ-II stellarators. The thermal coefficients are evaluated by energy convolution of the monoenergetic coefficients obtained by direct interpolation or neural network techniques from the databases precalculated by different codes. The temperature profiles are calculated by a predictive transport code from the energy balance equations with the ambipolar radial electric field estimated from a diffusion equation to guarantee a unique and smooth solution, although several solutions of the ambipolarity condition may exist when root-finding is invoked; the density profiles are fixed. The thermal transport coefficients as well as the ambipolar radial electric field are compared and very reasonable agreement is found for both configurations. Together with an additional W7-X case, these configurations represent very different degrees of neoclassical confinement at low collisionalities. The impact of the neoclassical optimization on the energy confinement time is evaluated and the confinement times for different devices predicted by transport modeling are compared with the standard scaling for stellarators. Finally, all configurations are scaled to the same volume for a direct comparison of the volume-averaged pressure and the neoclassical degree of optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The three-dimensional modeling of plasma edge transport and divertor fluxes during application of resonant magnetic perturbations on ITER

Results from three-dimensional modeling of plasma edge transport and plasma–wall interactions during application of resonant magnetic perturbation (RMP) fields for control of edge-localized modes in the ITER standard 15 MA Q = 10 H-mode are presented. The full 3D plasma fluid and kinetic neutral transport code EMC3-EIRENE is used for the modeling. Four characteristic perturbed magnetic topologies are considered and discussed with reference to the axisymmetric case without RMP fields. Two perturbation field amplitudes at full and half of the ITER ELM control coil current capability using the vacuum approximation are compared to a case including a strongly screening plasma response. In addition, a vacuum field case at high q95 = 4.2 featuring increased magnetic shear has been modeled. Formation of a three-dimensional plasma boundary is seen for all four perturbed magnetic topologies. The resonant field amplitudes and the effective radial magnetic field at the separatrix define the shape and extension of the 3D plasma boundary. Opening of the magnetic field lines from inside the separatrix establishes scrape-off layer-like channels of direct parallel particle and heat flux towards the divertor yielding a reduction of the main plasma thermal and particle confinement. This impact on confinement is most accentuated at full RMP current and is strongly reduced when screened RMP fields are considered, as well as for the reduced coil current cases. The divertor fluxes are redirected into a three-dimensional pattern of helical magnetic footprints on the divertor target tiles. At maximum perturbation strength, these fingers stretch out as far as 60 cm across the divertor targets, yielding heat flux spreading and the reduction of peak heat fluxes by 30%. However, at the same time substantial and highly localized heat fluxes reach divertor areas well outside of the axisymmetric heat flux decay profile. Reduced RMP amplitudes due to screening or reduced RMP coil current yield a reduction of the width of the divertor flux spreading to about 20–25 cm and cause increased peak heat fluxes back to values similar to those in the axisymmetric case. The dependencies of these features on the divertor recycling regime and the perpendicular transport assumptions, as well as toroidal averaged effects mimicking rotation of the RMP field, are discussed in the paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Routes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile

Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating (ECRH) and, in some cases, with low power of ECRH after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m −3 .

high performance plasma↗

Dependence of scrape-off layer profiles and turbulence on gas fuelling in high density H-mode regimes in TCV

A set of high density, highly shaped H-mode discharges has been performed in the TCV tokamak with the aim of assessing the effects of increasing divertor neutral recycling on the properties of upstream inter-ELM scrape-off layer (SOL) profiles and transport. An increase of divertor neutral pressure has been correlated with the evolution of separatrix properties and turbulence level. The latter has been quantified by means of the α t parameter introduced in (Eich 2020 Nucl. Fusion 60 056016), describing the contribution of resistive-interchange turbulence in the SOL relative to drift wave transport. The analysis reveals a general broadening of the upstream SOL profiles as α t increases, with the SOL power width measured by the vertical IR thermography system increasing significantly. In a similar way, the upstream density profile widens in the near SOL, whereas in the far SOL a density shoulder is observed to progressively form and increase in amplitude. This behaviour is associated with an enhancement of far SOL turbulent transport in the form of blob-filaments travelling radially faster across the far SOL and becoming bigger at higher α t . Finally, the detected filaments, evaluated from the fast reciprocating probe at the outer midplane, are determined to mostly belong to the resistive ballooning and resistive X-point regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toroidal momentum transport in a tokamak caused by symmetry breaking parallel derivatives

A new mechanism for toroidal momentum transport in a tokamak is investigated using the gyro-kinetic model. First, an analytic model is developed through the use of the ballooning transform. The terms that generate the momentum transport are then connected with the poloidal derivative of the ballooning envelope, which are one order smaller in the normalised Larmor radius, compared with the derivative of the eikonal. The mechanism, therefore, does not introduce an inhomogeneity in the radial direction, in contrast with the effect of profile shearing. Numerical simulations of the linear ion temperature gradient mode with adiabatic electrons, retaining the finite {rho}{sub *} effects in the E Multiplication-Sign B velocity, the drift, and the gyro-average, are presented. The momentum flux is found to be linear in the normalised Larmor radius ({rho}{sub *}) but is, nevertheless, generating a sizeable counter-current rotation. The total momentum flux scales linear with the aspect ratio of the considered magnetic surface, and increases with increasing magnetic shear, safety factor, and density and temperature gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

OBSERVATIONS OF SUBARCSECOND BRIGHT DOTS IN THE TRANSITION REGION ABOVE SUNSPOTS WITH THE INTERFACE REGION IMAGING SPECTROGRAPH

Observations with the Interface Region Imaging Spectrograph (IRIS) have revealed numerous sub-arcsecond bright dots in the transition region above sunspots. These bright dots are seen in the 1400 Å and 1330 Å slit-jaw images. They are clearly present in all sunspots we investigated, mostly in the penumbrae, but also occasionally in some umbrae and light bridges. The bright dots in the penumbrae typically appear slightly elongated, with the two dimensions being 300-600 km and 250-450 km, respectively. The long sides of these dots are often nearly parallel to the bright filamentary structures in the penumbrae but sometimes clearly deviate from the radial direction. Their lifetimes are mostly less than one minute, although some dots last for a few minutes or even longer. Their intensities are often a few times stronger than the intensities of the surrounding environment in the slit-jaw images. About half of the bright dots show apparent movement with speeds of ∼10-40 km s{sup –1} in the radial direction. Spectra of a few bright dots were obtained and the Si IV 1402.77 Å line profiles in these dots are significantly broadened. The line intensity can be enhanced by one to two orders of magnitude. Some relatively bright and long-lasting dots are also observed in several passbands of the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory, and they appear to be located at the bases of loop-like structures. Many of these bright dots are likely associated with small-scale energy release events at the transition region footpoints of magnetic loops.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical simulation of current-free double layers created in a helicon plasma device

Two-dimensional simulations reveal that when radially confined source plasma with magnetized electrons and unmagnetized ions expands into diverging magnetic field B, a current-free double layer (CFDL) embedded in a conical density structure forms, as experimentally measured in the Australian helicon plasma device (HPD). The magnetized electrons follow the diverging B while the unmagnetized ions tend to flow directly downstream of the source, resulting in a radial electric field (E{sub Up-Tack }) structure, which couples the ion and electron flows. Ions are transversely (radially) accelerated by E{sub Up-Tack} on the high potential side of the double layer in the CFDL. The accelerated ions are trapped near the conical surface, where E{sub Up-Tack} reverses direction. The potential structure of the CFDL is U-shaped and the plasma density is enhanced on the conical surface. The plasma density is severely depleted downstream of the parallel potential drop ({phi}{sub Double-Vertical-Line Double-Vertical-Line o}) in the CFDL; the density depletion and the potential drop are related by quasi-neutrality condition, including the divergence in the magnetic field and in the plasma flow in the conical structure. The potential and density structures, the CFDL spatial size, its electric field strengths and the electron and ion velocities and energy distributions in the CFDL are found to be in good agreements with those measured in the Australian experiment. The applicability of our results to measured axial potential profiles in magnetic nozzle experiments in HPDs is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Broadband Photon Spectrum and its Radial Profile of Pulsar Wind Nebulae

The observed radial profiles of the X-ray emission from pulsar wind nebulae (PWNe) have been claimed to contradict the standard 1D steady model. However, the 1D model has not been tested to simultaneously reproduce the volume-integrated spectrum and the radial profile of the surface brightness. We revisit the 1D steady model and apply it to PWNe 3C 58 and G21.5−0.9. We find that the parameters of the pulsar wind, the radius of the termination shock r{sub s}, and magnetization σ greatly affect both the photon spectrum and radial profile of the emission. We have shown that the parameters constrained by the entire spectrum lead to an X-ray nebula smaller than the observed nebula. We have also tested the case that reproduces only the observations in X- and gamma-rays, ignoring the radio and optical components. In this case, there are parameter sets that reproduce both the spectrum and emission profile, but the advection time to the edge of the nebula becomes much smaller than the age. Our detailed discussion clarifies that the standard 1D steady model has severe difficulty to simultaneously reproduce both the volume-integrated spectrum and the surface brightness. This implies that the model should be improved by taking into account extra physical processes such as spatial diffusion of particles. Additionally, we calculate the surface brightness profile of the radio, optical, and TeV gamma-rays. The future observations in these wavelengths are also important to probe the spatial distributions of the relativistic plasma and the magnetic field of PWNe.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameter space mapping of the Princeton magnetorotational instability experiment

Extensive simulations of the Princeton Magnetorotational Instability (MRI) Experiment with the Spectral/Finite Element code for Maxwell and Navier-Stokes Equations (SFEMaNS) have been performed to map the MRI-unstable region as a function of inner cylinder angular velocity and applied vertical magnetic field. The angular velocities of the outer cylinder and the end-cap rings follow the inner cylinder in fixed ratios optimized for MRI. Here, we first confirm the exponential growth of the MRI linear phase using idealized conducting vertical boundaries (end caps) rotating differentially with a Taylor-Couette profile. Subsequently, we run a multitude of simulations to scan the experimental parameter space and find that the normalized volume-averaged mean-square radial magnetic field, our main instability indicator, rises significantly where MRI is expected. At various locations, the local radial components of fluid velocity and generated magnetic field are well correlated with the volume-averaged indicator. Based on this correlation, a diagnostic system that will measure the radial magnetic field at several locations on the inner cylinder is proposed as the main comparison between simulation and experiment. A detailed analysis of poloidal mode structures in the SFEMaNS code indicates that MRI, rather than Ekman circulation or Rayleigh instability, dominates the fluid behavior in the region where MRI is expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A multi-sheath model for highly nonlinear plasma wakefields

An improved description for nonlinear plasma wakefields with phase velocities near the speed of light is presented and compared against fully kinetic particle-in-cell simulations. These wakefields are excited by intense particle beams or lasers pushing plasma electrons radially outward, creating an ion bubble surrounded by a sheath of electrons characterized by the source term S≡−1enp(ρ−Jz/c), where ρ and Jz are the charge and axial current densities, respectively. Previously, the sheath source term was described phenomenologically with a positive-definite function, resulting in a positive definite wake potential. In reality, the wake potential is negative at the rear of the ion column which is important for self-injection and accurate beam loading models. To account for this, we introduce a multi-sheath model in which the source term, S, of the plasma wake can be negative in regions outside the ion bubble. Using this model, we obtain a new expression for the wake potential and a modified differential equation for the bubble radius. Numerical results obtained from these equations are validated against particle-in-cell simulations for unloaded and loaded wakes. The new model provides accurate predictions of the shape and duration of trailing bunch current profiles that flatten plasma wakefields. It is also used to design a trailing bunch for a desired longitudinally varying loaded wakefield. We present beam loading results for laser wakefields and discuss how the model can be improved for laser drivers in future work. Finally, we discuss differences between the predictions of the multi- and single-sheath models for beam loading.

Dalichaouch, T. N. (ORCID:0000000247350150)↗