Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

In‐Scribe Silane Bonding for Mechanical Reinforcement of Perovskite Photovoltaic Modules

Despite the extraordinary rise in power conversion efficiency over the last decade, metal halide perovskite (MHP) photovoltaics remain more mechanically fragile than other PV technologies. In this work, the scribe area, created by the monolithic interconnection of thin-film solar cells, is used to extrinsically reinforce the mechanical robustness of packaged MHP solar modules. In contrast to the epoxy-based chemistries often leveraged in the MHP literature, silane-grafted polyolefin encapsulants are designed to form strong covalent bonds to oxide surfaces, specifically to glass and the transparent conductive oxide at the base of the scribe line. Pseudo-modules encapsulated with silane-grafted polyolefin are measured with more than an order-of-magnitude enhancement infracture energy from 0.27 ± 0.01 J·m −2 (no scribes) to 5.97 ± 0.42 J·m −2 (scribes perpendicular to delamination directioncovering ≈2.2% of the module area). The silane-grafted polyolefin retains strong adhesion even after undergoing an accelerated IEC 61215 thermal cycling test consisting of 250 cycles. We find that the in-scribe bonding allows perovskite modules to have adhesion strength comparable to commercial c-Si and CdTe technologies with only 5% reduction in the active module area. This manufacturing-compatible approach offers a practical solution to address the mechanical integrity challenges in MHP solar modules, regardless of cell architecture.

14 SOLAR ENERGY↗

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two‐Dimensional Perovskite Solar Cells

Abstract Organic‐inorganic hybrid two‐dimensional (2D) perovskites ( n ≤5) have recently attracted significant attention because of their promising stability and optoelectronic properties. Normally, 2D perovskites contain a monocation [e.g., methylammonium (MA + ) or formamidinium (FA + )]. Reported here for the first time is the fabrication of 2D perovskites ( n =5) with mixed cations of MA + , FA + , and cesium (Cs + ). The use of these triple cations leads to the formation of a smooth, compact surface morphology with larger grain size and fewer grain boundaries compared to the conventional MA‐based counterpart. The resulting perovskite also exhibits longer carrier lifetime and higher conductivity in triple cation 2D perovskite solar cells (PSCs). The power conversion efficiency (PCE) of 2D PSCs with triple cations was enhanced by more than 80 % (from 7.80 to 14.23 %) compared to PSCs fabricated with a monocation. The PCE is also higher than that of PSCs based on binary cation (MA + ‐FA + or MA + ‐Cs + ) 2D structures.

Gao, Liguo↗

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two-Dimensional Perovskite Solar Cells

Organic-inorganic hybrid two-dimensional (2D) perovskites ( n ≤5) have recently attracted significant attention due to their promising stability and optoelectronic properties. Normally, 2D perovskites contain a mono cation (e.g., methylammonium (MA + ) or formamidinium (FA + )]. Here, we report for the first time on fabricating 2D perovskites ( n =5) with mixed cations of MA + , FA + , and cesium (Cs + ). The use of these triple cations leads to the formation of a smooth, compact surface morphology with larger grain size and fewer grain boundaries compared to the conventional MA-based counterpart. The resulting perovskite also exhibits longer carrier lifetime and higher conductivity in triple-cation 2D perovskite solar cells (PSCs). Furthermore, the power conversion efficiency (PCE) of 2D PSCs with triple cations was enhanced by more than 80% (from 7.80% to 14.23%) compared to PSCs fabricated with a mono cation; the PCE is also higher than that of PSCs based on binary-cation (MA + -FA + or MA + -Cs + ) 2D structures.

14 SOLAR ENERGY↗

Facile, Versatile and Stepwise Synthesis of High‐Performance Oligomer Acceptors for Stable Organic Solar Cells

Abstract Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long‐term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri‐Y6‐OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by‐products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri‐Y6‐OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T 80 ) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6‐OD‐based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.

Chemistry↗

Correlation of Broad Absorption Band with Small Singlet‐Triplet Energy Gap in Organic Photovoltaics

Abstract Organic photovoltaics (OPV) are one of the most effective ways to harvest renewable solar energy, with the power conversion efficiency (PCE) of the devices soaring above 19 % when processed with halogenated solvents. The superior photocurrent of OPV over other emerging photovoltaics offers more opportunities to further improve the efficiency. Tailoring the absorption band of photoactive materials is an effective way to further enhance OPV photocurrent. However, the field has mostly been focusing on improving the near‐infrared region photo‐response, with the absorption shoulders in short‐wavelength region (SWR) usually being neglected. Herein, by developing a series of non‐fullerene acceptors (NFAs) with varied side‐group conjugations, we observe an enhanced SWR absorption band with increased side‐group conjugation length. The underpinning factors of how molecular structures and geometries improve SWR absorption are clearly elucidated through theoretical modelling and crystallography. Moreover, a clear relationship between the enhanced SWR absorption and reduced singlet‐triplet energy gap is established, both of which are favorable for the OPV performance and can be tailored by rational structure design of NFAs. Finally, the rationally designed NFA, BO‐TTBr, affords a decent PCE of 18.5 % when processed with a non‐halogenated green solvent.

Chemistry↗

Layer-by-Layer Organic Solar Cells Enabled by 1,3,4-Selenadiazole-Containing Crystalline Small Molecule with Double-Fibril Network Morphology

A double-fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high-performance organic solar cells (OSCs). However, in the layer-by-layer processed OSCs (LbL-OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. Here, in this work, crystalline small molecule donors (SMDs), named TDZ-3TR and SeDZ-3TR, were designed and introduced into the L8-BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ-3TR showed higher crystallinity and lower miscibility with L8-BO acceptor than TDZ-3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8-BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double-fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL-OSCs.

36 MATERIALS SCIENCE↗

(CH 3 NH 3 ) AuX 4 ·H 2 O (X=Cl, Br) and (CH 3 NH 3 ) AuCl 4 : Low-Band Gap Lead-Free Layered Gold Halide Perovskite Materials

Perovskite solar cells have recently enabled power conversion efficiency comparable to established technologies such as silicon and cadmium telluride. Ongoing efforts to improve the stability of halide perovskites in ambient air has yielded promising results. However, the presence of toxic heavy element lead (Pb) remains a major concern requiring further attention. Herein, we report three new Pb-free hybrid organic–inorganic perovskite-type halides based on gold (Au), (CH 3 NH 3 )AuBr 4 ·H 2 O ( 1 ), (CH 3 NH 3 )AuCl 4 ·H 2 O ( 2 ), and (CH 3 NH 3 )AuCl 4 ( 3 ). Hydrated compounds 1 and 2 crystallize in a brand-new structure type featuring perovskite-derived 2D layers and 1D chains based on pseudo-octahedral AuX 6 building blocks. In contrast, the novel crystal structure of the solvent-free compound 3 shows an exotic non-perovskite quasi-2D layered structure containing edge- and corner-shared AuCl 6 octahedra. The use of Au metal instead of Pb results in unprecedented low band gaps below 2.5 eV for single-layered metal chlorides and bromides. Moreover, at room temperature the three compounds show a weak blue emission due to the electronic transition between Au-6s and Au-5d, in agreement with the density function theory (DFT) calculation results. These findings are discussed in the context of viability of Au-based halides as alternatives for Pb-based halides for optoelectronic applications.

13 HYDRO ENERGY↗

A Mixed PC 61 BM‐CO i 8DFIC Based Electron Transport Material for Inverted High‐performance Perovskite Solar Cells

Abstract This study reports a blend of [6, 6]‐phenyl‐C61‐butyric acid methyl ester (PC 61 BM) and CO i 8DFIC non‐fullerene acceptor (NFA) as an electron transport layer (ETL) in perovskite solar cells (PSCs). This mixed small‐molecule ETL showed good inter‐molecule mixing, reduced intermolecular distances and decent morphology, resulting in excellent charge carrier transport properties. Morever, charge carrier extraction and transport at the perovskite/ETL interface was optimized by reducing surface traps and defects due to the passivation ability of various terminal groups from the CO i 8DFIC molecule. A high power conversion efficiency (PCE) of 19.12 % was achieved by taking advantage of benefits from both molecules, showing much better performance than the invidual PC 61 BM or CO i 8DFIC (7.13% for using the NFA only). Moreover, the storage and ambient stabilities of the mixed ETL‐based PSCs increased dramatically compared to control devices.

Chemistry↗

Will Nontoxic High‐Performance Perovskite Photovoltaics Ever Be Possible?

Lead-based halide perovskite solar cells represent a significant advancement in photovoltaic technology, achieving certified power conversion efficiencies of over 27%. However, the toxicity of lead poses a major barrier to widespread commercialization. The demand for environmentally safe alternatives has driven extensive research into Pb-free perovskites. Current efforts include replacing Pb with Sn or Ge; forming double perovskites in which Pb is substituted by a monovalent–trivalent cation pair; and developing chalcogenide perovskites where the B site (ABX 3 ) adopts tetravalent cations (rather than Pb) to balance the charge. This concept examines the recent progress in developing Pb-free alternatives, revealing fundamental performance bottlenecks, inherent material limitations, and persistent development challenges. Through a comparative assessment of material properties and device performance limitations, this work highlights the underlying dilemma between environmental safety and efficiency in perovskite photovoltaics. The analysis identifies fundamental material constraints that create substantial barriers to simultaneously achieving both objectives.

36 MATERIALS SCIENCE↗

Monobenzoporphyrins as Sensitizers for Dye‐Sensitized Solar Cells: Observation of Significant Spacer‐Group Effect

Abstract A series of monobenzoporphyrins ( WH1 – WH4 ) bearing different conjugated spacer groups were designed and synthesized as sensitizers for dye‐sensitized solar cells. Although a phenyl spacer only has a minimal impact on the absorption bands of the monobenzoporphyrin, an ethynylphenyl ( WH3 ) or a vinyl ( WH4 ) spacer redshifts and broadens the absorption bands of the dyes to result in much enhanced light‐harvesting ability. Dye‐sensitized solar cells based on these monobenzoporphyrin dyes displayed remarkable differences in power conversion efficiencies (PCEs). The monobenzoporphyrin bearing no spacer ( WH1 ) resulted in a PCE of only 0.5 %; in contrast, the monobenzoporphyrin bearing vinyl spacers ( WH4 ) achieved a PCE of 5.2 %. The high efficiency of the WH4 cell is attributed to the higher light‐harvesting ability, the lesser extent of aggregation on the TiO 2 surface, and the more favorable electron‐density distributions of the HOMO and LUMO for electron injection and collection. This work demonstrates the exceptional tunability of benzoporphyrins as sensitizers for dye‐sensitized solar cells.

Jinadasa, R. G. Waruna↗

Ionic Liquid Engineering in Perovskite Photovoltaics

Over the past decade, perovskite photovoltaics have approached other currently available technologies and proven to be the most prospective type of solar cells. Although the many-sided research in this very active field has generated consistent results with regard to their undisputed consistently increasing power conversion efficiency, it also produced several rather contradictory opinions. Among other important details, debate surrounding their proneness to surface degradation and poor mechanical robustness, as well as the environmental footprint of this materials class, remains a moot point. The application of ionic liquids appears as one of the potential remedies to some of these challenges due to their high conductivity, the opportunities for chemical “tuning” of the structure, and relatively lower environmental footprint. This article provides an overview, classification, and applications of ionic liquids in perovskite solar cells. Here, we summarize the use and role of ionic liquids as versatile additives, solvents, and modifiers in perovskite precursor solution, in charge transport layer, and in interfacial and stability engineering. Finally, challenges and the future prospects for the design and/or selection of ionic liquids with a specific profile that meets the requirements for next-generation highly efficient and stable perovskite solar cells are proposed.

14 SOLAR ENERGY↗

3D graphene from CO 2 and K as an excellent counter electrode for dye-sensitized solar cells

3D graphene, which was synthesized directly from CO 2 via its exothermic reaction with liquid K, exhibited excellent performance as a counter electrode for a dye-sensitized solar cell (DSSC). The DSSC has achieved a high power conversion efficiency of 8.25%, which is 10 times larger than that (0.74%) of a DSSC with a counter electrode of the regular graphene synthesized via chemical exfoliation of graphite. The efficiency is even higher than that (7.73%) of a dye-sensitized solar cell with an expensive standard Pt counter electrode. This work provides a novel approach to use a greenhouse gas for DSSCs.

36 MATERIALS SCIENCE↗

Characterizing Electric Field Exposed P3HT Thin Films Using Polarized-Light Spectroscopies

P3HT (poly (3-hexylthiophene)) has been widely used as a donor in the active layer in organic photovoltaic devices. Although moderately high-power conversion efficiencies have been achieved with P3HT-based devices, structural details, such as the orientation of polymer units and the extent of H- and J-aggregation are not yet fully understood; and different measures have been taken to control the ordering in the material. One such measure, which we have exploited, is to apply an electric field from a Van de Graaff generator. We used fluorescence (to measure anisotropy instead of polarization, which is more commonly measured) and Raman spectroscopy to characterize the order of P3HT molecules in thin films resulting from the field. We determine preferential orientations of the units in a thin film, consistent with observed hole mobility in thin-film-transistors, and observe that the apparent H-coupling strength changes when the films are exposed to oriented electrical fields during drying.

36 MATERIALS SCIENCE↗

Unraveling the Photovoltaic, Mechanical, and Microstructural Properties and Their Correlations in Simple Poly(3‐pentylthiophene) Solar Cells

Abstract The power conversion efficiency of polythiophene organic solar cells is constantly refreshed. Despite the renewed device efficiency, very few efforts have been devoted to understanding how the type of electron acceptor alters the photovoltaic and mechanical properties of these low‐cost solar cells. Herein, the authors conduct a thorough investigation of photovoltaic and mechanical characteristics of a simple yet less‐explored polythiophene, namely poly(3‐pentylthiophene) (P3PT), in three different types of organic solar cells, where ZY‐4Cl, PC 71 BM, and N2200 are employed as three representative acceptors, respectively. Compared with the reference poly(3‐hexylthiophene) (P3HT)‐based solar cells, P3PT‐based devices, all perform more efficiently. Particularly, the P3PT:ZY‐4Cl blend exhibits the highest efficiency (ca. 10%) among the six combinations and outperforms the prior top‐performance system P3HT:ZY‐4Cl. Furthermore, the blend films based on N2200 exhibit a high crack‐onset strain of ∼38% on average, which is approximately 15‐ and 17‐times higher than those of ZY‐4Cl and PC 71 BM, respectively. The microstructural origins for the above difference are well elucidated by detailed grazing incidence X‐ray scattering and microscopy analysis. This work not only underlines the potential of P3PT in prolific solar cell research but also demonstrates the superior tensile properties of polythiophene‐based all‐polymer blends for the preparation of stretchable solar cells.

Polymer Science↗

Property Prediction of Organic Donor Molecules for Photovoltaic Applications Using Extremely Randomized Trees

Organic solar cells are an inexpensive, flexible alternative to traditional silicon-based solar cells but disadvantaged by low power conversion efficiency due to empirical design and complex manufacturing processes. This process can be accelerated by generating a comprehensive set of potential candidates. However, this would require a laborious trial and error method of modeling all possible polymer configurations. A machine learning model has the potential to accelerate the process of screening potential donor candidates by associating structural features of the compound using molecular fingerprints with their highest occupied molecular orbital energies. In this paper, extremely randomized tree learning models are employed for the prediction of HOMO values for donor compounds, and a web application is developed. Finally, the proposed models outperform neural networks trained on molecular fingerprints as well as SMILES, as well as other state-of-the-art architectures such as Chemception and Molecular Graph Convolution on two datasets of varying sizes.

42 ENGINEERING↗

Design and synthesis of thieno[3,4‐ c ]pyrrole‐4,6‐dione based conjugated copolymers for organic solar cells

Abstract A new series of conjugated copolymers ( PBDT‐TPD , PBDT ‐Th‐ TPD , PBDT‐TT‐TPD ) containing donor–acceptor (D − A) structure electron‐rich benzo[1,2‐ b :4,5‐ b ′]dithiophene ( BDT ) units with branched alkyl thiophene side chains and electron‐deficient 5‐(2‐octyl)‐4 H ‐thieno[3,4‐ c ]pyrrole‐4,6(5 H )‐dione (TPD) units was designed and synthesized. To tune the optical and electrochemical properties of the copolymers, the conjugation length of the copolymers was extended by introducing π‐conjugated spacers such as thiophene and thieno[3,2‐ b ]thiophene units. It was observed that PBDT‐TPD showed broader absorption spectra in the longer wavelength region and the absorption maximum was red‐shifted compared to that of PBDT‐Th‐TPD, PBDT‐TT‐TPD. Stokes shifts were calculated to be 52 nm for PBDT‐TPD, 153 nm for PBDT‐Th‐TPD and 146 nm for PBDT‐TT‐TPD. Further, PBDT‐TPD exhibited a deeper highest occupied molecular orbital energy level of −5.53 eV as calculated by cyclic voltammetry. Bulk heterojunction solar cells fabricated using PBDT‐TPD as donor material exhibited a power conversion efficiency of 1.92%. © 2017 Society of Chemical Industry

Kotturappa, Chandrashekara G.↗

Co-optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells: SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin-film solar cells consisting of earth-abundant and non-toxic materials were created from pulsed chemical vapor deposition (pulsed-CVD) of SnS as the p-type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n-type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were investigated for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post-deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved.

14 SOLAR ENERGY↗

Sodium doping of solution-processed amine-thiol based CIGS solar cells by thermal evaporation of NaCl

Poor crystallinity, high degree of porosity and rough surfaces are the main drawbacks of solution-processed CIGS absorbers resulting in lower power conversion efficiencies when compared to vacuum-based CIGS solar cells. Therefore, promoting absorber grain growth is key to further improve solution-based solar cell performance. The effect of alkali elements such as Na in CIGS absorbers is generally recognised to have beneficial effects not only on the absorber opto-electronic properties but also on the grain growth. In this work, thermal evaporation of a thin layer of NaCl prior to selenisation resulted in absorbers with significantly larger CIGS grains than previously seen with Na diffusing directly from the from soda-lime glass substrate. NaCl is non-toxic, abundant and readily available compound that has not been typically used as an evaporation source, but rather as an additive into CIGS precursor solution. The effect of Na on these solution-processed CIGS devices was primarily observed in the spectacular morphological changes leading to improved carrier collection and minority carrier lifetimes, but less on the absorber doping. Transmission electron microscopy (TEM) revealed voids forming around large CIGS grains upon NaCl addition and these had a negative effect on inter-grain carrier transport. Nonetheless, the resulting device performance doubled from 5% to 10% with addition of Na using this doping approach; however, a compromise between the optimum grain growth and optimum electronic properties had to be made. This study demonstrates a novel, simple and effective Na-doping strategy for CIGS absorbers and reveals the current limitations of the Na-doping in solution-processed atmospherically deposited cells.

14 SOLAR ENERGY↗