Procedures for management control of computer programming in Apollo
Procedures for management control of computer programming in Apollo project
MANAGEMENT PLANNING↗
SEARCH · Search NASA
Results for “Program management”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigation into Reductive Separation of Tc-99 from Low Activity Waste Off-Gas Condensate by Zero Valent Iron Materials - 20311
This study is investigating the potential for reductive separation of technetium-99 (Tc) from off-gas condensate generated from vitrification of legacy tank waste at the Hanford Tank Waste Treatment and Immobilization Plant. Management of Tc is a high-priority activity for the U.S. Department of Energy (DOE) Office of Environmental Management (EM) complex, which must be addressed based on knowledge gaps and technology development needs outlined in the DOE-EM Technetium Management Program Plan [1]. Technetium is one of the main risk drivers in the permanent disposal of low activity waste (LAW) by vitrification at the Hanford Site due to its high volatility and only fractional incorporation into borosilicate glass. Volatilized Tc will be captured by an off-gas treatment system, and the current plan is to continuously recycle generated condensate back to the LAW glass melter feed. Off-gas recycling is effective at increasing Tc loading in the LAW glass, but it also disproportionately increases concentrations of sulfate, halides, and other volatile compounds impeding overall LAW processing leading to significantly greater waste glass volume requirements. Removal of Tc from secondary liquid waste offers an alternative disposal route to continuous off-gas recycling which may result in significant reduction of the volumes of LAW waste glass and substantial cost savings. The objective of this research funded by the DOE-EM Minority Serving Institutions Partnership Program (MSIPP) is to determine the suitability of zero valent iron (ZVI) as a separation technology to remove Tc from the off-gas condensate stream to minimize its recycle. While ZVI has been proposed for various remediation applications with Tc, it has not been studied for its suitability for removing Tc from the LAW off-gas condensate. The goal is to identify the optimal conditions for which Tc{sup (VII)} will be reduced to Tc{sup (IV)} species and incorporated into an iron matrix. This paper presents a programmatic overview of our evaluation of commercial ZVI materials for their efficiency towards Tc{sup (VII)} reductive removal from simplified off-gas simulant solutions under aerobic conditions. Tc concentrations in solutions were monitored for up to 30 days to determine efficiency and kinetics of reductive removal of Tc. The best performing candidate materials were selected for further experiments evaluating the effects of (1) variable ionic strength, (2) the presence of chromium and corrosive anions, and (3) ZVI aging on Tc{sup (VII)} reductive removal in batch experiments. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Demolition of the K-27 Building at the East Tennessee Technology Park (ETTP) - 17423
On February 8, 2016, URS - CH2M Oak Ridge LLC (UCOR) initiated the demolition of the East Tennessee Technology Park's (ETTP's) final gaseous diffusion building in DOE's Oak Ridge Environmental Management program. Building K-27 was a 35,582 m{sup 2} (383,000 ft{sup 2}) gaseous diffusion building that contained approximately 92,903 m{sup 2} (1 million ft{sup 2}) of floor space. It was one of five gaseous diffusion buildings at the site, formerly known as the Oak Ridge Gaseous Diffusion Plant. The actual demolition of this facility took approximately seven months to complete; however, planning and preparation took more than three years. The deactivation process was a critical element in preparing the building for demolition. UCOR's K-27 deactivation activities began in April 2012 with the installation of safe walking paths and fall protection systems to allow safe work access. Next, all mechanical and electrical systems associated with the facility were shut down and isolated, a process known as 'cold and dark.' More than 19.3 km (12 mi) of process piping and components were marked and measured. Additionally, workers performed nondestructive assay (NDA) and vent-purge-and-drain activities and applied foam to piping and components as needed [1]. Based on characterization results, approximately 4.8 km (3 mi) of process piping, and 372 converters and compressors were removed and shipped offsite prior to demolition. Lower-hazard materials and equipment were demolished with the building structure and transported to onsite disposal facilities. Upfront waste characterization and ongoing monitoring were key to the successful disposal of demolition debris at onsite facilities. Due to process improvements in waste loading recommended by work crews, the project achieved a 50 percent improvement in the daily hauling rate during the 9,000-truckload shipping campaign. Crews worked in high-risk, high-hazard conditions and were exposed to radiological and chemical contaminants, extreme temperatures, and deteriorating infrastructure. However, the hazard controls that were put in place, based on the Integrated Safety Management System (ISMS) walk-downs and hazard determination, made the effort manageable. The overall safety performance during demolition of the facility was excellent, with no significant injuries, and exceeded industry standards and DOE target levels. Outstanding safety performance was a testament to the dedication of the workforce, given the significant hazards presented by the demolition of the Hazard Category 2 nuclear facility. Another key element to the success of the K-27 demolition was the support and approval of all stakeholders involved in this effort, including DOE, the surrounding communities, the State of Tennessee, the UCOR management team, and, most importantly, the workforce that performed this highly hazardous work. This $52 million demolition project was completed ahead of schedule with no significant injuries and in compliance with all DOE orders, site procedures, and environmental controls. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Monitoring Disasters by Use of Instrumented Robotic Aircraft
Efforts are under way to develop data-acquisition, data-processing, and data-communication systems for monitoring disasters over large geographic areas by use of uninhabited aerial systems (UAS) robotic aircraft that are typically piloted by remote control. As integral parts of advanced, comprehensive disaster- management programs, these systems would provide (1) real-time data that would be used to coordinate responses to current disasters and (2) recorded data that would be used to model disasters for the purpose of mitigating the effects of future disasters and planning responses to them. The basic idea is to equip UAS with sensors (e.g., conventional video cameras and/or multispectral imaging instruments) and to fly them over disaster areas, where they could transmit data by radio to command centers. Transmission could occur along direct line-of-sight paths and/or along over-the-horizon paths by relay via spacecraft in orbit around the Earth. The initial focus is on demonstrating systems for monitoring wildfires; other disasters to which these developments are expected to be applicable include floods, hurricanes, tornadoes, earthquakes, volcanic eruptions, leaks of toxic chemicals, and military attacks. The figure depicts a typical system for monitoring a wildfire. In this case, instruments aboard a UAS would generate calibrated thermal-infrared digital image data of terrain affected by a wildfire. The data would be sent by radio via satellite to a data-archive server and image-processing computers. In the image-processing computers, the data would be rapidly geo-rectified for processing by one or more of a large variety of geographic-information- system (GIS) and/or image-analysis software packages. After processing by this software, the data would be both stored in the archive and distributed through standard Internet connections to a disaster-mitigation center, an investigator, and/or command center at the scene of the fire. Ground assets (in this case, firefighters and/or firefighting equipment) would also be monitored in real time by use of Global Positioning System (GPS) units and radio communication links between the assets and the UAS. In this scenario, the UAS would serve as a data-relay station in the sky, sending packets of information concerning the locations of assets to the image-processing computer, wherein this information would be incorporated into the geo-rectified images and maps. Hence, the images and maps would enable command-center personnel to monitor locations of assets in real time and in relation to locations affected by the disaster. Optionally, in case of a disaster that disrupted communications, the UAS could be used as an airborne communication relay station to partly restore communications to the affected area. A prototype of a system of this type was demonstrated in a project denoted the First Response Experiment (Project FiRE). In this project, a controlled outdoor fire was observed by use of a thermal multispectral scanning imager on a UAS that delivered image data to a ground station via a satellite uplink/ downlink telemetry system. At the ground station, the image data were geo-rectified in nearly real time for distribution via the Internet to firefighting managers. Project FiRE was deemed a success in demonstrating several advances essential to the eventual success of the continuing development effort.
Wegener, Steven S.↗
NUHOMS{sup R} EOS (Extended Optimized Storage): Robust, Advanced, and Dual Purpose Dry Storage System - 16472
AREVA TN has completed the design, analysis, and US NRC license submittal for the NUHOMS{sup R} Extended Optimized Storage (EOS) system. NUHOMS{sup R} EOS offers a large capacity and high heat load dry storage and transportation solution for UNF. EOS is not a new system, but an evolution of the already-proven safe and low-risk horizontal NUHOMS{sup R} storage system, which is one of the most widely used UNF dry storage systems in the United States. The EOS system features a 37PTH dry shielded canister (DSC) for 37 PWR UNF assemblies and an 89BTH DSC for the 89 BWR UNF assemblies. The EOS DSCs will be stored inside a horizontal storage module (HSM) that is a robust, fortress-like concrete storage overpack. Designed with the lessons learned from the Fukushima event in Japan in mind, EOS has robust margins for beyond design basis (BDB) events and offers the lowest risk and highest safety margin of any dry storage system design for recovery from BDB events. EOS also offers innovative aging management features with an aging management program (AMP) to assure safe and low dose long-term storage at the utility sites. EOS incorporates ports for AMP inspections and offers the option of using duplex stainless steel (DSS) for the DSC shell in order to negate corrosion issues. EOS is stored horizontally and above ground, making it easy and quick to access for visual inspection, monitoring, and mitigating actions during AMP. NUHOMS{sup R} EOS is optimized for high capacity, high burnup, high enrichments, and very low cooling times for UNF assemblies. It enables the highest heat load per canister (50 kW) and low dose rates. Even with high heat loads, EOS has significant margins to design basis limits. As the future of used fuel disposition will require the need to move fuel off-site to interim or consolidated storage, EOS is the ideal solution as it enables on-site loading and unloading operations that mitigate risk when transferring fuel on-site or transporting fuel off-site. The EOS design can be safely located in a traditional outdoor setting with fortress-like concrete reinforced modules that offer superior resistance to attack or can be safely operated inside of a building enclosure for those utilities desiring a more discreet siting for its used fuel storage systems. EOS has an innovative basket design that is made of high strength low alloy (HSLA) material and is easy to fabricate due to its non-welded design. Its innovative inlet and outlet air vent design, which incorporates dose reduction hardware, allows for optimal ambient airflow for highly efficient heat transfer with minimal radiation dose. The NUHOMS{sup R} EOS storage modules are interlocked in a side-by-side configuration offering superior and robust seismic performance. The license application for NUHOMS{sup R} EOS is currently under US NRC review and this system will be available for deployment in 2017. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
An Overview of R and D on Retrievability and Retrieval Technology in Germany - 20462
Retrievability is a term that is included in most radioactive waste management programs around the world. Although national definitions vary, the overall understanding of retrievability concerns the ability to recover waste packages from the repository mine after their emplacement. Different countries may implement retrievability in very different ways, ranging from a built-in reversibility into the emplacement process to the stipulation that retrievability may in no way impede passive safety in the post-closure phase. Germany takes a middle course such that retrievability in a HLW repository (repository for high level radioactive waste) may have no significant detrimental effect on passive safety. In Germany, the current siting process considers rock salt, clay rock, and crystalline rock as potential host rocks. Therefore, Research and Development (R and D) has been investigating repository concepts and retrievability in all host rocks. After introduction of retrievability in 2010, existing repository concepts were modified to facilitate retrieval. The changes made comprised, for example, equipping boreholes with steel liners, developing new technologies, and modifying existing emplacement devices. Apart from retrieval of HLW, retrieval of other wastes from underground repositories that were designed and operated without retrievability in mind, poses major technical and scientific challenges. Currently, studies are under way to investigate the feasibility and costs of partial retrieval of waste from an underground repository for hazardous and highly toxic waste in France, Stocamine. With regard to retrieval, the rock-mechanical conditions are deteriorating rapidly, so time is of the essence. In the Asse II mine in Germany, about 126,500 waste casks with low and intermediate level waste await retrieval. The repository mine suffers from difficult rock-mechanical conditions and inflow of brine, locally into emplacement areas. The Federal Company for Radioactive Waste Disposal (BGE) is legally required to retrieve all wastes from the Asse. Due to the specific challenges, R and D is needed to develop technical solutions for the safe retrieval from each of the emplacement chambers. R and D on retrievability and retrieval technology does not only address challenges in radioactive or toxic waste retrieval but may also help to germinate innovation to better master complex underground situations in general, e.g. in deep mining, tunneling, or repository construction. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Mercury Remediation in Oak Ridge, Tennessee; Successes and Remaining Challenges - 19390
Mercury remediation is a high priority for the US Department of Energy's (DoE's) Environmental Management program in Oak Ridge, Tennessee because of large historical losses of mercury to the environment, and the potential health risks to humans and wildlife primarily through fish consumption. Remedial solutions for mercury contaminated aquatic systems are limited - many aquatic systems have diffuse sources of mercury (Hg) and depending on the environmental conditions, these low concentrations of inorganic Hg can result in fish consumption advisories due to the production of the more toxic methylmercury (MeHg) and its bioaccumulation and biomagnification. From the 1980's to the present, long-term monitoring of mercury concentrations in water and fish downstream of DOE facilities in Oak Ridge have provided an opportunity to assess the performance and effectiveness of various remedial and abatement actions to address mercury. Early actions in the mid-1980's focused on pollution control that positively affected mercury discharges to one local stream, including consolidation and elimination of untreated discharges, sanitary sewer relining, the construction of a pollution control facility, and the replacement of a contaminated settling basin. The 1990's were an intensive period of facility remedial actions designed to improve stream water quality and reduce mercury discharges. Actions included dechlorinating cooling water discharges, an additional phase of storm sewer relining, the addition of flow from a nearby reservoir, the addition of two small-scale mercury treatment systems, the bypass of stream flow around the settling basin, and the removal of high mercury-contaminated floodplain soils. Because of these multiple remedial actions total mercury concentrations in receiving streams decreased significantly; however, mercury concentrations in fish did not respond commensurately and remain a challenge to the present day. Although the mercury remedial strategy in Oak Ridge will continue to focus in the near-term on upstream facility source reduction, recent research suggests that understanding mercury transport, methylation, and bioaccumulation processes in the downstream environment is essential to reducing mercury fish concentrations. Since 2014, mercury remediation research and technology development activities have been underway to develop potential remedial solutions for the downstream environment, including use of sorbents to control soil leaching and the potential use of chemical or biological manipulations. The Oak Ridge mercury remediation story is a valuable case study for flowing systems that can inform our national-level understanding of potential mercury cleanup actions and their likely environmental response. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Analysis of Krypton-85 Legacy Waste Forms: Part II
During a removal of legacy materials from one hot cell at the Idaho National Laboratory in 2010, five metal capsules and some loose zeolite material were identified as krypton (Kr) immobilization test specimens produced in the late 1970s under the Airborne Waste Management Program (AWMP). This AWMP research and development effort examined the encapsulation of 85Kr within a collapsed zeolite structure for use as a potential waste form for long-term storage. The recovered capsules appeared to have been placed to the side and remained untouched after the AWMP was halted in the mid-1980s. These reclaimed capsules and loose material presented a unique opportunity to study a potential 85 Kr waste form after three half-lives had elapsed. The first phase of this study included two parts: The first was to assess the physical condition of the capsule walls, and the second was to examine the Kr-containing material within the capsules. The first part of this study was previously reported and noted that substantial corrosion was observed throughout each capsule wall of the two previously breached capsules that were examined. One of these capsules had been hot isostatic pressed (HIPed) and one was not HIPed. The second part of the study examined the materials contained in the two previously breached capsules. There appears to be a relatively uniform distribution of Kr and rubidium throughout the pellets examined. The chemical composition of the pellets appears to be consistent with 5A molecular sieves. The material contained within the HIPed capsules showed ~1 at. % lead (Pb). The origin of the Pb is currently indeterminate. X-ray diffraction analysis shows a significant shift from the 5A structure, most likely due to the Kr encapsulation/sintering process that occurred when the samples were made. Calculations based on the energy dispersive spectrometry elemental analysis show a residual Kr level within the pellets that is within a factor of 2 of the reported Kr capacities for this type of processed material. This provides a clear indication that a significant fraction of the Kr initially encapsulated in the material remained within the waste form even following a significant breach of the capsule wall. As a result, it would appear that this Kr immobilization method, even in non-HIPed form, is very promising as a waste form for long-term storage. The successful analysis of these two breached capsules forms a solid basis for the future analysis of the remaining unbreached capsules, which offers the opportunity to provide an even more complete understanding of the long-term Kr retention performance of this promising waste form.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Synthesis and Characterisation of Caesium Phosphomolybdate and Zirconium Molybdate found in the Highly Active Storage Tanks at Sellafield - 18154
Caesium phosphomolybdate (Cs{sub 3}PMo{sub 12}O{sub 40}.xH{sub 2}O, CPM) and zirconium molybdate (ZrMo{sub 2}O{sub 7}(OH){sub 2}.xH{sub 2}O, ZM) are two known fission products that precipitate out within the Highly Active Storage Tanks (HASTs) at Sellafield, potentially causing 'hot-spots' and blocking pipes. Currently, there is not enough behavioural understanding of these compounds present in the Highly Active Liquor (HAL) for effective Post Operational Clean Out (POCO) strategic planning. As the HASTs do not have an in situ monitoring system the behaviour of the HAL cannot be directly observed. Therefore, as with this research, non-radioactive simulants can be utilised to aid behavioural understanding to assist with the planning of future waste management programs. CPM, along with two different morphologies of ZM were characterised and compared to the common oxide particle material titanium dioxide (TiO{sub 2}). The study provides a detailed physical characterisation of the simulants including: particle shape, particle size, water content and crystal structure, along with zeta particle potential, suspension settling and compressive yield stress. CPM was found to be spheroidal in nature with a particle size of 275 nm and an x value of 13 H{sub 2}O which crystallises as a cubic lattice with space group Pn-3m. ZM was found to have a range of morphologies from cuboidal to wheat-sheaf, varying in size from 10 μm to 20 μm, with an x value of between 3 and 4 H{sub 2}O, which crystallise as a body-centred tetragonal lattice with space group I4{sub 1cd}. TiO{sub 2} used as a comparison simulant was found to be spheroidal in shape with particle size of 725 nm. The isoelectric points (IEPs) of the two ZM samples (ZM-A and ZM-B) with different morphologies were found to be pH 2.5, while for TiO{sub 2} it was pH 3.2. For CPM it could not be confidently identified due to its instability within the acidic environment. The settling rates and compressive yield stress of all simulants were tested in both water and 2 M nitric acid, conditions that replicate the HASTs. TiO{sub 2}, ZM-A and ZM-B all found settled faster in acid than in water. For CPM, slightly faster settling in acid was measured. For all samples it was found that as the particle concentration increased the settling rate decreased, which is a result of hindered settling. For compressive yield stress, similar trends were observed for CPM with little variation in its behaviour in acid and water, suggesting that the particles are highly aggregated in both fluids. For ZM samples little change in equilibrium volume fraction was measured with an increase in pressure (both acid and water). However, overall the sediment bed was denser in water, a result of the rapid settling in acid not allowing the non-spherical particles to pack in an ordered manner. It has been highlighted that both CPM and ZM within the acidic conditions of the HASTs, result in unstable and aggregated compounds, which settle quickly to form large open networks. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Approximating Dose and Risk for Contaminants in Groundwater from the Underground Nuclear Test Areas of the Nevada National Security Site (NNSS)
As part of the Environmental Management Program at the Nevada National Security Site (NNSS), the Underground Test Area (UGTA) Activity investigates the potential impacts of radionuclides that were introduced into groundwater from the underground nuclear tests conducted near or below the NNSS water table between 1951 and 1992. Groundwater models are being used to simulate contaminant transport and forecast contaminant boundaries that encompass areas where the groundwater has a five percent or greater probability of containing contaminants above the Safe Drinking Water Act Maximum Contaminant Levels (SDWA MCLs) at any time during the next 1,000 years. Transport modeling conducted for the Frenchman Flat Corrective Action Unit (CAU) at the NNSS identified the beta/photon-emitting radionuclides tritium (3H), carbon-14 ( 14 C), chlorine-36 ( 36 Cl), technetium-99 ( 99 Tc), and iodine-129 ( 129 I) as having the greatest influence in defining the farthest extent of the modeled CAU contaminant boundary. These same radionuclides are assumed here as the contaminants of concern (COCs) for all underground nuclear tests at the NNSS because models are not yet complete for the other CAUs. Potential public exposure to the COCs will only occur and be of concern if the COCs migrate into the groundwater beneath public or private lands at levels that exceed either individual SDWA MCLs or dose and risk limits. Groundwater flow directions strongly suggest that any contaminant boundary predicted by contaminant fate and transport modeling to overlap public or private lands is more likely to occur to the west and/or southwest of the NNSS and the adjacent Nevada Test and Training Range (NTTR). Well-established, rural communities exist in these directions. Estimates of representative activity concentrations at the applicable SDWA MCL were developed for the five COCs. It is assumed that these COC concentrations may collectively occur at some public or private location in the future, but that situation does not exist today. These representative activity concentrations are evaluated with respect to conforming collectively to a modern annual committed effective dose (CED) and lifetime excess cancer morbidity risk for a hypothetical reasonably maximally exposed individual (RMEI). This approach goes beyond the SDWA MCL focus of the contaminant boundary because individual COC concentrations may comply with the SDWA MCL but not collectively meet the modern health-protection metrics and the SDWA language, especially if future modeling studies or monitoring activities show multiple radionuclides from different SDWA MCL categories to be COCs. For the drinking water exposure pathway alone, the annual committed effective dose (CED) for the RMEI from all five COCs that are collectively at estimated activity concentrations equal to their SDWA MCL is well below the U.S. Department of Energy health-protective CED limit of 100 millirem (mrem)/yr. This is consistent using both the NNSS unclassified, 1992 decay-corrected radionuclide atom inventory and the atom inventory based on radionuclides measured in groundwater obtained from the ALMENDRO cavity in 2009 to calculate the SDWA MCL activity concentrations in groundwater. The RMEI’s total lifetime excess cancer risk from the drinking water exposure pathway for both atom inventories is within the range of 1 × 10 -4 to ≤ 1 × 10 -6 , which is considered health protective according to modern SDWA MCL regulatory language. The biosphere exposure pathways are drinking water, garden produce, animal products, inadvertent soil ingestion, and indoor and outdoor air inhalation. The exposure parameters for communities west and southwest of the NNSS were developed when the Yucca Mountain high-level, nuclear-waste disposal facility was under consideration. For all biosphere exposure pathways, calculations of the annual CED and lifetime excess cancer morbidity risk for the RMEI revealed that: 1) The annual CED is well within health-protective guidance (<< 100 mrem CED /yr) for the COC activity concentrations at the SDWA MCL, regardless of the atom inventory used. 2) The calculated 70-year lifetime excess cancer morbidity risk (6 x 10 -5 ) is within the health-protective range when the five COC activity concentrations are derived using the NNSS 1992 atom inventory, but it is at the upper limit of the acceptable range (1 x 10 -4 ) using the ALMENDRO 2009 atom inventory. 3) Tritium (3H) is the principal COC for producing annual dose and lifetime excess cancer risk, regardless of the atom inventory used. 4) Overall, the drinking water ingestion pathway is the dominant exposure pathway contributing to the total annual CED and lifetime excess cancer risk, followed by eating locally grown produce and animal products. 5) When tritium completely decays (after about 100 years), the RMEI’s lifetime risk will fall well within the health-protective range (i.e., 1 × 10-4 to ≤ 1 × 10 -6 ) and 36Cl will then become the most important contributor to the RMEI’s total annual CED and lifetime excess cancer morbidity risk from eating local produce and animal products. In the event that radionuclide concentrations begin to approach SDWA MCLs, a reasonable risk-management strategy for keeping lifetime risk more in compliance with regulatory guidance would be to use local sources of groundwater that are below SDWA MCLs or to limit the consumption of local produce and animal products that have ingested COC-contaminated groundwater. The viability of the latter strategy increases where the annual CED due to 36Cl approaches that of 3H.The dose and risk values calculated here for an RMEI are specific to the assumption that the five COCs occur in groundwater beneath public or private lands at concentrations that are collectively at the SDWA MCL. Currently, these COCs are essentially absent from groundwater beneath public or private lands beyond the boundaries of the NNSS and NTTR other than at very low, naturally occurring concentrations. The analyses presented here can be readily applied to determine dose and risk for COC concentrations actually measured in future monitoring samples.
54 ENVIRONMENTAL SCIENCES↗
Operational programs in forest management and priority in the utilization of remote sensing
A speech is given on operational remote sensing programs in forest management and the importance of remote sensing in forestry is emphasized. Forest service priorities in using remote sensing are outlined.
Douglass, R. W.↗
Issues in NASA program and project management
This collection of papers and resources on aerospace management issues is inspired by a desire to benefit from the lessons learned from past projects and programs. Inherent in the NASA culture is a respect for divergent viewpoints and innovative ways of doing things. This publication presents a wide variety of views and opinions. Good management is enhanced when program and project managers examine the methods of veteran managers, considering the lessons they have learned and reflected on their own guiding principles.
Hoban, Francis T.↗
Evaluation of Rhodamine B as a biomarker for assessing bait acceptance in wild pigs
ABSTRACT Worldwide, there is growing interest in the use of pharmaceutical baits to control populations of wild pigs ( Sus scrofa ). In this study we evaluated the utility of Rhodamine B (RB), a chemical marker commonly used in wildlife research and management, as a potential biomarker for quantifying bait uptake in wild pigs. Thirty wild pigs were live‐trapped, transported to a captive facility on the Department of Energy's Savannah River Site located in South Carolina, USA, during autumn 2013, and administered RB orally at a dosage of 30 mg/kg. Eight vibrissae and guard hairs were collected pre‐ and post‐RB exposure (7 or 14 days) and evaluated for the presence of RB using fluorescence microscopy. No evidence of RB marking was observed in any samples collected pre‐RB administration. In contrast, we observed fluorescent marking post‐RB exposure that was indicative of the presence of RB for all individuals, with 98% of vibrissae and 100% of guard hairs exhibiting RB marks. The uniform detection of RB among individuals and consistent manifestation of marks in both guard hair and vibrissae, samples that easily can be collected and stored by untrained field personnel from live or deceased pigs, suggests that RB is an effective biomarker for use in large‐scale management programs to control wild pigs. In particular, our results, combined with previous studies evaluating uptake of RB in other species, suggest that RB can be used to develop baiting programs to deliver pharmaceuticals to free‐ranging wild pigs, as well as evaluate the potential impacts of pig baits on non‐target species. © 2014 The Wildlife Society.
Beasley, James↗
Porting Adaptive Ensemble Molecular Dynamics Workflows to the Summit Supercomputer
Molecular dynamics (MD) simulations must take very small (femtosecond) integration steps in simulation-time to avoid numerical errors. Efficient use of parallel programming models and accelerators in state-of-the art MD programs now is pushing Moore’s limit for time-per-MD step. As a result, directly simulating timescales beyond milliseconds will not be attainable directly, even at exascale. However, concepts from statistical physics can be used to combine many parallel simulations to provide information about longer timescales and to adequately sample the simulation space, while preserving details about the dynamics of the system. Implementing such an approach requires a workflow program that allows adaptable steering of task assignments based on extensive statistical analysis of intermediate results. Here we report the implementation of such an adaptable workflow program to drive simulations on the Summit IBM Power System AC922, a pre-exascale supercomputer at the Oak Ridge Leadership Computing Facility (OLCF). We compare to experiences on Titan, Summit’s predecessor, report the performance of the workflow and its components, and describe the porting process. We find that using a workflow program managed by a Mongo database can provide the fault tolerance, scalable performance, task dispatch rate, and reconfigurability required for robust and portable implementation of ensemble simulations such as are used in enhanced-sampling molecular dynamics. This type of workflow generator can also be used to provide adaptive steering of ensemble simulations for other applications in addition to MD.
Ossyra, John R.↗
Interspecific oral rabies vaccine bait competition in the Southeast United States
Here, the United States Department of Agriculture’s National Rabies Management Program (NRMP) has coordinated the use of oral rabies vaccination (ORV) to control the spread of raccoon rabies virus variant west of the Appalachian Mountains since 1997. Working with state and local partners, the NRMP deploys ORV baits containing a rabies vaccine, primarily targeting raccoon populations (Procyon lotor). Bait competition between raccoons and non-target species may limit the effectiveness of ORV programs, but the extent of bait competition remains poorly quantified, particularly in the southeastern United States. We placed placebo ORV baits in bottomland hardwood (n = 637 baits) and upland pine (n = 681 baits) habitats in South Carolina, USA during August-December 2019 and used remote cameras to examine bait competition between raccoons and non-target species. The estimated proportion of bait consumed by raccoons was 18.8 ± 2.1% in bottomland hardwood and 11.6 ± 2.1% in upland pine habitats. Vertebrate competition appeared to have a minimal effect on raccoon uptake as estimated consumption did not exceed 5% for any species or 8% of bait uptake events cumulatively. We estimated that raccoons were the primary consumer of baits in bottomland hardwood, whereas invertebrates were the primary consumer in upland pine (26.7 ± 1.3% of baits). Our results indicate a need to closely consider the effects of invertebrates on bait consumption to minimize their potential impact on ORV bait uptake by target species. Uptake probabilities by raccoons were relatively low but not primarily driven by competition with vertebrates. As such, strategies to increase the specificity of raccoon uptake may be needed to enhance the effectiveness of ORV baiting programs.
60 APPLIED LIFE SCIENCES↗
Hybrid metal additive/subtractive machine tools and applications
Additive manufacturing creates parts by depositing a preform, typically layer by layer. Subtractive manufacturing involves removing material from a preform to create parts. Hybrid machine tools combine both additive and subtractive processes in the same workspace. They can be used to create parts that meet functional tolerance and surface finish requirements, or to create features that are difficult to produce using additive or subtractive processes alone. Here, this paper describes hybrid metal additive/subtractive machine tools. It covers design considerations, sensors and controls, process management, programming and software, and the impact on the design space. It also identifies future research challenges.
42 ENGINEERING↗
Process design of the piperazine advanced stripper for a 460 MW NGCC
The Texas Carbon Management Program is conducting a Front-End Engineering Design (FEED) for Piperazine with the Advanced Stripper™ (PZAS™) at a natural gas combined cycle power plant in west Texas. Here, this paper presents the design of the advanced stripper system with an emphasis on the selection of packing type, packing height, column diameter, and heat exchanger size, demonstrates the effect of ambient temperature swing on the regeneration energy requirement, and investigates two alternate process configurations that provide better energy performance than PZAS™. The design uses 2 stripper trains, and each train uses two cold cross exchangers, one hot cross exchanger, a stripper column, a CO 2 exchanger, and a condenser. Each column consists of two sections of random packing with RSR 2 packing at the top and RSR 3 packing at the bottom, with a total packed height of 7.5 m. The cold exchanger was designed with an NTU of 6, the hot exchanger with an NTU of 2, and the CO 2 exchanger with an NTU of 5. At 0.4 rich loading and 0.2 lean loading, this design resulted in a heat duty of 2.85 GJ/tonne CO 2 . The heat duty can vary up to 3.1 GJ/tonne CO 2 due to lower rich loading at higher summer temperature, but the absolute steam requirement is 8–15% lower in the summer. An alternate design, PZAS with hot rich bypass, is proposed, which can reduce the equivalent work of stripping by 1.5–3.5% compared to PZAS at low heat exchanger size, due to a reduction in stripper driving force. Using a hot rich bypass increases the vapor fraction of the total rich bypass stream from 0.3 to 1 mol% compared to using the warm rich bypass, which also contributes to a reduction in lost work in the column. PZAS with hot rich bypass outperforms PZAS in energy requirement below a packing height of 15 m, but fails to do so above 15 m of packing due to a column pinch that results in little change in LMTD of the column. PZAS with hot rich bypass has the potential to minimize capital cost in addition to reducing energy requirement as it requires less packing to strip CO 2 than PZAS and requires only one cross exchanger with 8 heat transfer units.
03 NATURAL GAS↗
Perspective on identifying and characterizing the processes controlling iron speciation and residence time at the atmosphere-ocean interface
It is well recognized that the atmospheric deposition of iron (Fe) affects ocean productivity, atmospheric CO 2 uptake, ecosystem diversity, and overall climate. Despite significant advances in measurement techniques and modeling efforts, discrepancies persist between observations and models that hinder accurate predictions of processes and their global effects. Here, we provide an assessment report on where the current state of knowledge is and where future research emphasis would have the highest impact in furthering the field of Fe atmosphere-ocean biogeochemical cycle. These results were determined through consensus reached by diverse researchers from the oceanographic and atmospheric science communities with backgrounds in laboratory and in situ measurements, modeling, and remote sensing. We discuss i) novel measurement methodologies and instrumentation that allow detection and speciation of different forms and oxidation states of Fe in deliquesced mineral aerosol, cloud/rainwater, and seawater; ii) oceanic models that treat Fe cycling with several external sources and sinks, dissolved, colloidal, particulate, inorganic, and organic ligand-complexed forms of Fe, as well as Fe in detritus and phytoplankton; and iii) atmospheric models that consider natural and anthropogenic sources of Fe, mobilization of Fe in mineral aerosols due to the dissolution of Fe-oxides and Fe-substituted aluminosilicates through proton-promoted, organic ligand-promoted, and photo-reductive mechanisms. In addition, the study identifies existing challenges and disconnects (both fundamental and methodological) such as i) inconsistencies in Fe nomenclature and the definition of bioavailable Fe between oceanic and atmospheric disciplines, and ii) the lack of characterization of the processes controlling Fe speciation and residence time at the atmosphere-ocean interface. Such challenges are undoubtedly caused by extremely low concentrations, short lifetime, and the myriad of physical, (photo)chemical, and biological processes affecting global biogeochemical cycling of Fe. However, we also argue that the historical division (separate treatment of Fe biogeochemistry in oceanic and atmospheric disciplines) and the classical funding structures (that often create obstacles for transdisciplinary collaboration) are also hampering the advancement of knowledge in the field. Finally, the study provides some specific ideas and guidelines for laboratory studies, field measurements, and modeling research required for improved characterization of global biogeochemical cycling of Fe in relationship with other trace elements and essential nutrients. In conclusion, the report is intended to aid scientists in their work related to Fe biogeochemistry as well as program managers at the relevant funding agencies
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗