Search NASA⌕ Search

SEARCH · Search NASA

Results for “Purity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Electrochemical-driven green recovery of lithium, graphite and cathode from lithium-ion batteries using water

The expected exponential increase in consumption of lithium-ion batteries (LIBs) would pose a unique challenge to the availability of near-critical resources like lithium and graphite in the upcoming decade. In this work, we present a lithium recovery process that utilizes a degradation mechanism, i.e., lithium plating, as a tool to concentrate metallic lithium at the anode/separator interface for convenient extraction at room temperature – using only water. Electrochemical characterization of fast charged (1–6 C) LIBs yielded a maximum capacity fade of 50% over ten cycles. The lithium plating was confirmed via voltage plateau analysis, coulombic efficiency, and DC resistance measurements. A maximum lithium plating condition was observed to exist between 4C and 5C, thereby limiting the energy consumption in the extraction process. Post-mortem film thickness measurement showed an incrementing film deposition with a maximum of 35 µm thickness. SEM and XPS analysis confirmed increasing concentration of a dense dendritic metallic lithium deposition on the anode/separator interface with C-rate. A green recovery process was adopted to extract the concentrated metallic lithium using distilled water. The lithium from the plated film, solid/electrolyte interface (SEI), electrolyte, anode, and cathode, was extracted as salts. A 37% improvement in lithium recoverability was achieved with fast charging under ambient conditions. XPS analysis showed ~92% of lithium yield with no residual lithium in the graphite. In addition, the battery-grade graphite was recovered with 97% purity after heat treatment of the washed anode film, and concentrated transition metals oxides in the cathode to 93% purity for convenient extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isolation and characterization of endothelial colony-forming cells from mononuclear cells of rat bone marrow

Highlights: • BM-ECFCs are isolated from rat bone marrow with high purity by an optimized method. • Primary colony BM-ECFCs highly display CD34{sup +}/CD133{sup +}/VEGFR2{sup +}. • BM-ECFCs possess and maintain pronounced angiogenic abilities during the expansion. • BM-ECFCs spontaneously form tube-like structures during culture without Matrigel. Transplantation of bone marrow-derived endothelial progenitor cells (BM-EPCs) has been used as a therapeutic strategy for vascular repair. However, it remains controversial whether BM-EPCs exhibit clonal endothelial colony-forming cell (ECFC) capacity, a characteristic of true EPCs. The aim of this study was to isolate and explore the cellular properties of BM-ECFCs. We isolated BM-ECFCs from rat bone marrow with high purity via an optimized method. This approach involved the removal of selective colonies based on the conventional differential adhesive culture method used to isolate ECFCs from peripheral and umbilical cord blood. Our results indicate that primary colony BM-ECFCs display a panel of surface antigen markers consistent with endothelial cells. These BM-ECFCs coexpress CD34, CD133, and VEGFR2 at high levels, and these levels decrease with passaging. These cells have high potential for proliferation, migration, and formation of capillary-like structures on Matrigel, and these abilities are retained during ex vivo expansion. Furthermore, BM-ECFCs cultured with 10% or 20% fetal bovine serum demonstrated two different patterns of spontaneous capillary-like structure formation. These results provide a foundation for isolation of ECFCs from human bone marrow for autologous cell transplantation and tissue engineering applications in the future.

60 APPLIED LIFE SCIENCES↗

Simultaneous Separation of Protactinium-230 and Uranium-230 Isotopes from a Proton-Irradiated Thorium Matrix

The use of radioisotopes in cancer therapy is becoming increasingly important. As a potential candidate for targeted alpha therapy, 230 U (t 1/2 = 20.8 d), the decay daughter of 230 Pa (t 1/2 = 17.4 d) is currently being investigated for cancer treatment. For radioisotopes to be used in biomedicine, they must be radiochemically pure and free from carrier interference. This can be challenging given their short half-life. Thus, in this study, radiological separation methods for harvesting isotopes for use in biomedicine must be simple, fast, and capable of obtaining the required purity levels. Herein, we demonstrate a new rapid method for the separation of 230 U and 230 Pa from a proton-irradiated 232 Th metal target and from coproduced fission products with high recovery and purity. A dual-column approach was used, in which the first column was an anion exchange (AX) column and the second column was a DGA column. The MP-1 AX resin was used for the primary separation of the three major components (U, Pa, and Th, as well as fission products), and the DGA column was used for further purification of the separated 230 U. The method is simple and allows for straightforward separation of U, Pa, Th, and fission products; also, the entire process from target dissolution to shipment of 230 U could be completed in 3 days with an overall 230 U recovery yield of 96 ± 3%. Additionally, separated 230 Pa fractions can be used to harvest ingrown 230 U after initial separation.

DGA resin↗

Separation of Protactinium Employing Sulfur-Based Extraction Chromatographic Resins

Protactinium-230 (t 1/2 = 17.4 d) is the parent isotope of 230 U (t 1/2 = 20.8 d), a radionuclide of interest for targeted alpha therapy (TAT). Column chromatographic methods have been developed to separate no-carrier-added 230 Pa from proton irradiated thorium targets and accompanying fission products. Results reported within this paper demonstrate the use of novel sulfur bearing chromatographic extraction resins for the selective separation of protactinium. The recovery yield of 230 Pa was 93 ± 4% employing a R 3 P=S type commercially available resin and 88 ± 4% employing a DGTA (diglycothioamide) containing custom synthesized extraction chromatographic resin. The radiochemical purity of the recovered 230 Pa was measured via high purity germanium γ-ray spectroscopy to be >99.5% with the remaining radioactive contaminant being 95 Nb due to its similar chemistry to protactinium. Finally, measured equilibrium distribution coefficients for protactinium, thorium, uranium, niobium, radium, and actinium on both the R 3 P=S type and the DGTA resin in hydrochloric acid media are reported, to the best of our knowledge, for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast Sintering and Dopant Effects in Garnet LLZO Solid Electrolytes

High-throughput, low-cost manufacturing, and optimization of solid electrolytes are necessary for the adoption of solid-state batteries. In this work, garnet-type Li 7 La 3 Zr 2 O 12 (LLZO) with different aliovalent dopants, 𝑇𝑎$_{^·_{𝑍𝑟}}$, 𝐴𝑙$^{··}_{𝐿𝑖}$, and 𝐺𝑎$^{··}_{𝐿𝑖}$, have been ultrafast-sintered with different temperature ramping rates. The densification behavior, phases, their evolution, and surface chemistry of different LLZO have been investigated and linked to their electrochemical performances. It has been shown that LLZO with 𝑇𝑎$_{^·_{𝑍𝑟}}$ dopant demonstrates the highest garnet phase purity and overall best electrochemical performances, and ultrafast sintering further improves densification, ionic conductivity, and electrochemical stability. On the other hand, LLZO doped with 𝐴𝑙$^{··}_{𝐿𝑖}$ and 𝐺𝑎$^{··}_{𝐿𝑖}$ are reaching higher cubic phase purities and ionic conductivities via conventional sintering, indicating undesirable dopant migration and segregation during the ultrafast sintering process. In conclusion, these findings provide insights into the manufacturing of solid electrolyte materials.

36 MATERIALS SCIENCE↗

Phase Intergrowth and Structural Defects in Organic Metal Halide Ruddlesden–Popper Thin Films

Organic metal halide Ruddlesden–Popper phases combine the excellent optoelectronic properties of three-dimensional, bulk hybrid perovskites with superior material stability in ambient conditions. However, the thin film structure of these layered perovskites is still poorly understood, as phase purity is typically determined solely by specular X-ray diffraction. The thin film structure of these Ruddlesden–Popper phases was examined by increasingly local characterization techniques. It is difficult to assess the phase purity by purely bulk optical and diffraction measurements. From the comparison of grazing-incidence wide angle X-ray scattering (GIWAXS) patterns of cast films to expected scattering from single-crystal structures, significant in-plane disorder was observed. Spatially localized photoluminescence measurements show that films do not phase separate on the micrometer-scale. Selected area electron diffraction measurements show the intergrowth of different phases within the same thin film, consistent with previous observations seen in epitaxially-grown Ruddlesden–Popper complex oxides. Despite the presence of phase impurities that would typically be detrimental for device performance, fits to photothermal deflection spectroscopy measurements show relatively low Urbach energies of 33 meV for (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 2 Pb 3 I 10 and 32 meV for (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 3 Pb 4 I 13 , indicating that the electronic properties are insensitive to the phase impurities.

36 MATERIALS SCIENCE↗

Treatment of Highly Saline Brines by Supercritical Precipitation Followed by Supercritical Membrane Separation

A two-stage supercritical (SC) desalination system is proposed to treat highly saline brines to high-purity steam that could be used in power generation. Highly saline brines with up to similar to 20% salt content are pressurized and heated to SC conditions of 500 degrees C and 3500 psi to rapidly precipitate the dissolved salts and generate SC steam containing similar to 100 ppm salts. Two highly saline brines, collected from an oil field and a deep saline formation, and two concentrated NaCl solutions were treated in the SC desalination system. A SC membrane separation system with carbon filters is developed and used to purify the SC steam to a high purity level. Promising carbon filters or membranes prepared and tested for purifying SC steam included a porous graphite disk, a flexible graphite sheet, and a carbon nanotube-based membrane. Finally, the best performing membranes exhibited a very high water flux of similar to 200-800 kg/m 2 .h, with a salt rejection of >90%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wet to Dry Controls Lanthanide Scandate Synthesis

The choice of temperature and gas conditions used in a water pressure-controlled reactor is guided by density functional theory (DFT) to synthesize nearly phase pure lanthanide scandate nanoparticles (LnScO 3 , Ln = La, Nd, Sm, Gd). In this synthetic method, low water vapor partial pressures, well below water’s gas liquidus, inhibit particle growth, while an excess of water vapor results in undesired rare earth hydroxide and oxyhydroxide secondary phases. The optimal humidity for high-purity LnScO 3 particle synthesis is shown to vary with the lanthanide; DFT is used to calculate the thermodynamics of secondary phase formation for each lanthanide tested, such that the role of water vapor may be quantified and used to maintain phase purity (greater than 96 mol%) across the series. Furthermore, the combination of thermodynamic calculation and experimental confirmation with this pressure-controlled reactor provides an opportunity to explore analogous syntheses of other inorganic perovskite nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linear Viscoelastic Properties of Putative Cyclic Polymers Synthesized by Reversible Radical Recombination Polymerization (R3P)

Linear viscoelastic properties in both melt and solution states are reported for a series of poly(3,6-dioxa-1,8-octanedithiol) (polyDODT) made by reversible radical recombination polymerization (R 3 P) under conditions designed to produce linear (LDODT), cyclic (RDODT) and linear-cyclic mixtures (LRDODT). PolyDODT is amorphous (T g < -50 °C) and highly flexible (entanglement molecular weight M e,lin ≈ 1850 g/mol for LDODT). PolyDODT’s low T g and low M e,lin enable characterization over a wide dynamic range and a wide range of dimensionless weight-average molecular weight Z w = M w /M e,lin . Measurements at temperatures from -57 °C to 100 °C provide up to 18 deades of reduced frequency, which is necessary to characterize RDODT melts with Z w from 23 to 300. The two highest molecular weight polymers in the present RDODT series have such high M w (406k and 556k g/mol) that mass spectrometry, NMR spectroscopy, and even chemical assays for chain ends are unable to rule out up to 2 mol% linear contaminant. By studying the samples in solution (using dilution to reduce Z w ) we could compare their dynamics with those of previously established high-purity polystyrene (PS) rings (limited to Z w ≤ 13.6). RDODT solutions with Z w < 15 (concentrations <5wt% for RDODT-406k and 556k) have dynamic moduli G^* that accord with LCCC-purified PS rings in terms of the frequency dependence (including the absence of a plateau), the progression of shapes of G* as a function of Z w , and the linear scaling of their zero-shear viscosity η0 with M w . The shape of G* as a function of Z w for solutions of RDODT-406k and -556k also accord with lower M w RDODT melts (which have ≤ 1.3mol% linear contaminant). Thus, measurement of the linear viscoelastic properties of appropriate concentrations of high M w (>200k g/mol) putative cyclic polymers, in which linear chains evade spectroscopic detection, may provide an alternative means (though not fully proven) of validation of sample purity. When Z w > 15 (including all seven RDODT melts and eight of their solutions), G* has a rubbery plateau. This suggests that the onset of entanglement-like behavior in rings requires 4-5-fold greater Z w than is required for linear chains. Further, the plateau moduli of RDODT samples are indistinguishable from G N o of the corresponding LDODT (melt or matched-concentration solutions). In entangled linear polymers, the observation that G N o is independent of Z w follows from limitations on lateral fluctuations due to neighboring chains becoming independent of position along a given chain. The present results for RDODT suggest that this holds for sufficiently long endless chains, too. While the RDODT have the same G N o as entangled LDODT, when Z w > 60 the terminal relaxation, if reached at all, of RDODT extends to orders of magnitude lower frequency than an entangled linear polymer of the same Z w . Consequently, the viscosity of RDODT with Z w > 60 increases with Z w much more strongly than the 3.4-power observed for entangled linear polymers. Lastly, these novel polymers, with disulfide-linked backbone and broad relaxation time distribution may prove important in relation to biodegradable elastomers and materials with exceptional low-frequency dissipation, extending at least 12 decades below the onset of the rubbery plateau.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Improving Strain-localized GaSe Single Photon Emitters with Electrical Doping

Exciton localization through nanoscale strain has been used to create highly efficient single-photon emitters (SPEs) in 2D materials. However, the strong Coulomb interactions between excitons can lead to nonradiative recombination through exciton–exciton annihilation, negatively impacting SPE performance. Here, we investigate the effect of Coulomb interactions on the brightness, single photon purity, and operating temperatures of strain-localized GaSe SPEs by using electrostatic doping. By gating GaSe to the charge neutrality point, the exciton–exciton annihilation nonradiative pathway is suppressed, leading to ∼60% improvement of emission intensity and an enhancement of the single photon purity g (2) (0) from 0.55 to 0.28. The operating temperature also increased from 4.5 K to 85 K consequently. In conclusion, this research provides insight into many-body interactions in excitons confined by nanoscale strain and lays the groundwork for the optimization of SPEs for optoelectronics and quantum photonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strategy for Ultranarrow Light Down-Conversion for Displays Based on Bicolor-Emitting 2D Colloidal Heterostructures

The demand for ultranarrow spectral emission below 10 nm is critical for next-generation displays. Although current colloidal nanocrystals are successful in light down-conversion applications, they fall short in matching the stringent color purity requirements set by standards like Rec. 2020. Achieving such narrow linewidths through material engineering alone remains elusive, necessitating innovative light management strategies that avoid optical losses and maintain device efficiency. Here, in this work, we present a novel 2D colloidal heterostructure design, combining a CdSe core nanoplatelet, a CdS crown, and a CdZnS shell, to achieve bright bicolor emission in the solid state (green/red) emission with tunable intensity ratios controlled by excitation power (either optical or electrical). Integration of these nanoplatelets into a dielectric cavity further narrows the emission linewidth to sub-2 nm while enhancing the photoluminescence intensity by up to 200 times, meeting the Rec. 2020 color purity targets. This approach paves the way for a strategy avoiding complex laser-based solutions.

2D nanocrystals↗

Enhanced Single-Photon Emission from Carbon-Nanotube Dopant States Coupled to Silicon Microcavities

Single-walled carbon nanotubes are a promising material as quantum light sources at room temperature and as nanoscale light sources for integrated photonic circuits on silicon. Here, we show that the integration of dopant states in carbon nanotubes and silicon microcavities can provide bright and high-purity single-photon emitters on a silicon photonics platform at room temperature. We perform photoluminescence spectroscopy and observe the enhancement of emission from the dopant states by a factor of ~50, and cavity-enhanced radiative decay is confirmed using time-resolved measurements, in which a ~30% decrease of emission lifetime is observed. The statistics of photons emitted from the cavity-coupled dopant states are investigated by photon-correlation measurements, and high-purity single photon generation is observed. The excitation power dependence of photon emission statistics shows that the degree of photon antibunching can be kept high even when the excitation power increases, while the single-photon emission rate can be increased to ~1.7 × 10 7 Hz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved Solid-State Reaction Method for Scaled-Up Synthesis of Ceramic Proton-Conducting Electrolyte Materials

Protonic ceramic electrochemical cells (PCECs) represent promising technologies in the production of clean electricity, decarbonized hydrogen, chemicals, and fuels at intermediate temperatures. One of the challenges in commercializing PCECs is to produce the electrolyte materials on a large scale. The conventional solid-state reaction (SSR) method suffers from tedious synthesis procedures and low phase purity of the products due to the formation of unwanted secondary phases. Herein, we report an improved SSR (i-SSR) method for kilogram-scale production of high phase-purity electrolyte material BaZr 0.4 Ce 0.4 Y 0.1 Yb 0.1 O 3–δ (BZCYYb4411). In this method, the ball-milled precursor powders are pelletized prior to calcination, which effectively reduces the length of the diffusion paths between the components during perovskite phase formation. In this study, the synthesis procedure and calcination temperature are carefully optimized for efficient and repeatable production based on the powder crystallization behavior. A combined technoeconomic analysis and life cycle assessment modeling suggest that the i-SSR method could reduce the total production cost and greenhouse gas emissions by up to 19% and 39%, respectively, compared to the conventional SSR method. The high quality of the synthesized electrolyte material is corroborated by the excellent electrical conductivity and electrochemical performance of the fabricated PCEC cells.

36 MATERIALS SCIENCE↗

Irreversible Multielement Diffusion and the Resulting Compositional and Processing Flexibility in the Synthesis and Densification of Lithium Aluminum Lanthanum Zirconium Oxide

Despite the broad interest in Al-doped lithium lanthanum zirconium oxide (LLZO), the wide range of reported ionic conductivities suggests that the effect of processing parameters on the resulting phase purity and bulk conductivity is not well-understood. Here, in this work, we synthesized six separate series of LLZO with variations in Al concentration, Li excess, Li addition order, Li source, densification method, and mother powder to determine the effect on the composition, phase purity, density, and bulk conductivity. We found that a wider range of compositions (6.08–7.61 mol of Li and 0.06–0.23 mol of Al) than previously reported can result in cubic phase stability and that nearly all elements (Li, Al, Zr, and La) are lost to the MgO crucible during calcination and sintering. The manner in which different elements are lost is affected by the processing parameters. We observed that Al-doped LLZO shows great compositional flexibility in stabilizing the cubic phase, offering an explanation for the range of electrochemical performance metrics reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial Chemistry Involved in Selective Separation of NMC/LMO and LCO/LMO Binary Cathode Materials by Froth Flotation Using Oleic Acid

The variability in cathode compositions within recycled lithium-ion battery (LIB) feedstocks poses a significant challenge to efficient downstream refining processes. This study demonstrates the feasibility of using froth flotation with oleic acid as a collector to selectively separate lithium nickel-manganese-cobalt oxide (NMC) and lithium cobalt oxide (LCO) from lithium manganese oxide (LMO) materials. Laboratory-scale flotation tests achieved an 80% separation efficiency in a single stage, producing a froth product with >90% purity of NMC/LCO at approximately 90% yield. Concurrently, the LMO materials were enriched in the sink product with ∼90% purity and ∼90% yield. This approach was further validated using recycled cathode materials, confirming its applicability to realistic feedstocks. The underlying mechanism governing the selective separation of NMC/LCO from LMO was investigated using ζ-potential measurements, contact angle measurements, bubble-particle attachment experiments, and X-ray photoelectron spectroscopy (XPS) analysis. Both contact angle and bubble-particle attachment results confirmed that oleic acid adsorption rendered NMC and LCO surfaces hydrophobic, thereby enhancing flotation recovery. At pH 5, oleic acid adsorbed preferentially onto NMC and LCO surfaces via electrostatic interactions, while exhibiting minimal adsorption on LMO surfaces. However, separation efficiency deteriorated at higher pH, which was attributed to the co-flotation of LMO materials caused by oleate chemisorption on MnOH + species. This work establishes froth flotation as a viable cathode/cathode separation strategy, providing a low-cost, scalable pathway to preconcentrate and enrich nickel-rich and cobalt-rich cathode active materials from incompatible cathode chemistries for direct recycling or hydrometallurgical processing. Furthermore, this study reveals, for the first time, the mechanism of oleate adsorption on the surface of different cathode materials.

PH↗

Improved 140 Nd Production for the 140 Nd/ 140 Pr In Vivo Generator through Target Recycling and Radiochemical Optimization

Theranostic strategies that utilize f-block therapeutic radionuclides, including 161 Tb, 177 Lu, 225 Ac, and 227 Th, suffer from a shortage of positron emission tomography (PET) imaging counterparts in the same chemical space and often rely on 68 Ga as a surrogate. The 140 Nd/ 140 Pr in vivo PET generator, which belongs to the f-block, may address this issue and can be produced via the 141 Pr(p,2n) 140 Nd production route by using medium-energy cyclotrons. However, impurities in the target material, including stable Nd, and the inherent difficulty of adjacent lanthanide separations limit the achievable radionuclidic and chemical purity of 140 Nd. In this work, we address these challenges through the purification and recycling of praseodymium target material and optimization of Nd/Pr separation. The resulting purified 140Nd was evaluated using DOTA and Macropa chelators via radiolabeling and in vitro stability studies. A target material purification and recycling method was developed for the monoisotopic 141 Pr starting material to remove stable Nd impurities, yielding 90.3 ± 4.7% (n = 3) recovery. The purified 141 Pr was isolated as Pr 6 O 11 and irradiated with 24 MeV protons (20.07 MeV at the target surface) at 20 μA for 4 h, which produced 1417.0 ± 83.4 MBq (38.3 ± 2.2 mCi) of 140 Nd at the end of bombardment (EOB). The produced 140 Nd was purified through an optimized DGA normal method to recover 71.6 ± 6.3% pure 140 Nd. The amount of stable Nd reduced progressively in each target purification cycle from >340 ppm without purification to <250 ppb after three cycles, while other measured metallic impurities were below 30 ppb. This improvement in target purity was reflected in the direct increase of apparent molar activity (AMA), when purified 140 Nd was evaluated with DOTA and Macropa chelators. AMA of [ 140 Nd]Nd-DOTA and [ 140 Nd]Nd-Macropa increased from 70.3 MBq/μmol (1.9 mCi/μmol) and 74 MBq/μmol (2.0 mCi/μmol) to 8025.3 MBq/μmol (216.9 mCi/μmol) and 8473.0 MBq/μmol (229.0 mCi/μmol), respectively, after the third target purification cycle. Further evaluation of chelator-labeled 140 Nd showed that [ 140 Nd]Nd-DOTA was stable in phosphate-buffered saline (PBS), saline, human serum, and mouse serum, whereas [140Nd]Nd-Macropa was stable in all except human serum. This work established a practical methodological advance for the production of 140 Nd/ 140 Pr in vivo PET generators, combining optimized target recycling and radiochemical separation to enable scaled-up and high-molar activity 140 Nd suitable for preclinical imaging. These advances support broader development of 140 Nd/ 140 Pr as a robust PET analogue, especially for f-block therapeutics.

Irradiation↗