Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEPARATION PROCESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Continuous recovery of phosphoric acid and Rare-Earths containing particles from phosphoric acid sludge using a decanter centrifuge

Recovery of rare earth elements (REEs) from various industrial and natural streams currently draws significant attention in efforts to meet the demands of the manufacturing industry. Among many industrial byproducts and waste streams, phosphoric acid sludge could be one of the most economically feasible resources for the recovery of REEs because solid particles in the sludge contain relatively concentrated REEs, up to 3,000 ppm, while the liquid component of the sludge is valuable phosphoric acid (P 2 O 5 ) that can be recovered and returned to the main product. Due to high viscosity and large solids content (e.g., 30–40 %), however, this byproduct stream requires multistep separation and purification processes. In this study, a single-step process involving a continuous-flow decanter centrifuge (CFDC) was employed to investigate its feasibility for continuous solid/liquid separation from real phosphoric acid sludge. High centrifugal forces generated from up to 1500 G gravity acceleration separate solid particles from the sludge, generating a liquid-rich stream and a solids-rich stream at the exit of the CFDC. A single pass of phosphoric-acid sludge through the CFDC yielded 95 % liquid recovery and 90 % recovery of REEs-containing solids from 20 to 34 wt% solids-containing sludge. Finally, a reduced order model developed for the CFDC operation showed good agreement with experimental data, and preliminary technoeconomic analysis revealed potential process feasibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Approaches for Water Removal in Direct-Fired sCO 2 Power Cycles

There is interest in investigation of water removal processes in direct fired sCO 2 flows, as this may potentially lead to greater system efficiency as the removal of this contaminant will result in sCO 2 behaving close to idealized behaviors. Water removal should be split into a two-step process, condensation of the water, followed by separation of the liquid phase water from the sCO 2 . The two main avenues of condensation are manipulation of pressure and temperature for phase change. For this paper, temperature-based phase change is the primary focus through the implementation of heat exchangers. Of the heat exchangers investigated it was found that printed circuit heat exchangers (PCHEs) could be an alternative for this use case, though the specific design of flow channel geometry and flow direction depends on the specific system case and cannot be determined at this point. For water separation there were four processes identified, all of which already assume water is in liquid phase at that point in the system. Of these separation avenues the best candidate is the hydrocyclone as it has a proven history of separating liquid-liquid phase mixtures with small density differences in oilfield use, in addition they have been investigated and modeled specifically for water separation for sCO 2 flows and the footprint is relatively small.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2019

Systematic Process Intensification involving Zeotropic Distillation

Distillation is commonly used for separating homogeneous fluid mixtures. While it is based on a simple thermally driven vapor-liquid equilibrium phenomenon at the two-phase region, different variants of distillation systems exist. These include simple distillation, dividing wall columns, pressure swing distillation, thermally coupled distillation and reactive distillation. Complex separation may also involve multiple distillation in a sequence to achieve the desired products. These sequences can be constructed as direct sequence, indirect sequence or thermally coupled columns. Even when a sequence is fixed, each column in the sequence can have a plethora of design alternatives to consider. All these make the design and intensification of distillation systems a challenging task. The large number of plausible design alternatives increases the combinatorial complexity for screening. Although significant efforts have been made in the past, we still lack a method for systematic identification of novel pathways for process intensification of distillation system. This is due to the lack of a generalized representation of all plausible alternatives in a single modeling and optimization framework. In this work, we first present a general representation of thermally driven vapor-equilibrium phenomenon using abstract building blocks. Specifically, each tray in a distillation column is represented by a liquid block and a vapor block with a shared semi-restricted boundary representing the interface. The arrangement of these building blocks in a two-dimensional grid gives rise to all plausible variants of distillation systems. These systems range from simple distillation, dividing wall columns to task-integrated columns. This enables us to systematically identify both classic and out-of-the-box intensified designs at the column and flowsheet levels. The overall distillation-based separation process synthesis problem is formulated as a single mixed-integer nonlinear programming (MINLP) model. In conclusion, the proposed approach is applied to multi-component zeotropic systems to show the capability of identifying promising intensified alternatives.

42 ENGINEERING↗
DOE OSTI2019

Heat and Mass Transfer Study to Understand Thermal-Cycling Absorption Process (TCAP) Scale-Up Issues

TCAP was invented by SRNL and is a world-leading technology in hydrogen isotope separation, a critical process for fusion energy development and scientific research. External interests inquiries have been received for as high as a 1000-fold throughput increase over the currently available TCAP system. This study determined a major factor impacting TCAP column scale-up. A model derived by J. Calvin Giddings indicates that the combination of a coiled packed column and an increase in the column tube radius results in reduction of column separative performance. Reevaluation of data from SRNL TCAP column testing performed in 2004 indicates that the results are consistent with the Giddings model. Work with the Auburn University Center for Microfibrous Materials Manufacturing indicates that microfibrous entrapped sorbents (MFES) made from copper microfibers and Pd K could resolve issues with channeling and improve heat transfer and cycle time in TCAP columns.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantifying heavy quark transport coefficients with an improved transport model

We report that the heavy-flavor transport coefficients contain important information on the strong interaction at finite temperatures. The extraction of these numbers from experimental data requires dynamical modeling of heavy-flavor transport that is coupled to realistic medium evolution. Furthermore, meaningful extractions necessitate both a faithful implementation of the physical inputs to be tested and the quantification of model uncertainty. For these purposes, we have developed a partonic transport model LIDO. It has an improved treatment of in-medium parton bremsstrahlung, which has been calibrated to theoretical calculations in a simple medium to reduce modeling uncertainty. Regarding the interaction between heavy quark and the medium, few-body perturbative scatterings are applied to large-momentum transfer (q) processes, while a diffusion equation models the dynamics of small-q processes. Such a separation restricts the explicit use of medium quasi-particles to large-q processes only. Another advantage is that deviations from the leading-order probe-medium coupling can be parametrized as an additional contribution to the diffusion constant. The heavy quark transport coefficients are then extracted with uncertainty estimation from a Bayesian analysis including both the RHIC and the LHC data. The results are found to be consistent with earlier extraction of the light-quark transport coefficients at high momentum and be comparable with lattice calculations of the heavy-flavor diffusion constant in the static limit at low momentum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1982

Process for the production of ultrahigh purity silane with recycle from separation columns

Tri- and dichlorosilanes formed by hydrogenation in the course of the reaction of metallurgical silicon, hydrogen and recycle silicon tetrachloride are employed as feed into a separation column arrangement of sequential separation columns and redistribution reactors which processes the feed into ultrahigh purity silane and recycle silicon tetrachloride. A slip stream is removed from the bottom of two sequential columns and added to the recycle silicon tetrachloride process stream causing impurities in the slip streams to be subjected to reactions in the hydrogenation step whereby waste materials can be formed and readily separated.

Coleman, Larry M.↗
DOE OSTI2021

Separation of alkane and alkene mixtures by metal–organic frameworks

The separation of alkane/alkene gas mixtures represents an important yet challenging process in the petrochemical industry to produce valuable chemical feedstocks with sufficiently high purity. These molecules have similar physical properties, making their separation difficult and capital-intensive. The current separation and purification technology relies largely on heat-driven distillations with a huge unit composed of hundreds of trays. Adsorptive separation using porous solids is capable of accomplishing the purification under ambient conditions, offering potential energy and environmental benefits. In particular, metal–organic frameworks (MOFs) hold enormous promise for this separation process in light of their highly tunable pore shape, pore size, and pore surface functionality. In this review article, we provide a comprehensive account of metal–organic frameworks that have been investigated for the separation of alkanes and alkenes with a focus on C 2 –C 3 hydrocarbons. Here, the material design rationale, separation mechanisms, and structure–property relations are highlighted. Finally, the existing challenges and possible design strategies for desirable materials are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Core Model Proposal #377: Breaking out food processing sector in GCAM

Purpose: This Core Model Proposal (CMP) expands the representation of detailed industry (CMP-326) in GCAM by separating the food processing sector from the aggregate “other industry sector”. Historical energy use is calibrated to IEA data for food processing, with some infilling for regions with limited IEA data. Food processing is linked to the GCAM food demand module, setting the energy demand for food processing in future periods based on food demand. While the direct price feedback is currently muted and the linkage is represented at the aggregated regional level, this CMP establishes the groundwork for a more detailed connection between the agrifood sectors and energy sectors in future work.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Novel Membrane and Electrodeposition-Based Separation and Recovery of Rare Earth Elements from Coal Combustion Residues (Final Report)

This project developed a hydrometallurgical-based technology to extract and concentrate rare earth elements (REEs) from a representative group of coal combustion residuals (CCRs) from major coal sources in the United States. The approach for REE recovery comprises two general components: (1) Leaching of REEs from CCRs and (2) Separation of REEs from other major ions in the CCR leachate. The leaching step entails acid leaching with nitric or hydrochloric acid, and in some cases, pretreatment of CCRs with alkaline roasting prior to acid leaching. The follow-up REE recovery steps involve a series of membrane-based methods to separate and concentrate rare earth ions from other major ions in acid leachates of CCRs. These methods include liquid emulsion membranes, supported liquid membranes and electrodeposition with carbon nanotube electrochemical filters. The advantage of these separation approaches (relative to conventional approaches such as solvent extraction) is a reduction in the usage of solvents and other costly chemicals and a reduction of hazardous waste products that are challenges in conventional REE separation methods. In the testing of our process, we selected a representative set of CCR samples from our collection and performed a suite of characterization measurements (total REE content and major mineralogy). The major results of this work demonstrated that heated acid leaching could efficiently extract REEs from PRB-based coal fly ashes while the Appalachian and Illinois Basin CCRs required alkaline roasting with NaOH prior to acid leaching at room temperature. The supported liquid membrane (SLM) configuration and electrochemical deposition (ED) system yielded the most promising methods of REE recovery from the acid leachates of fly ash. Our most concentrated product to date comprised 1 wt.% (dry basis) REEs produced from an Appalachian-based fly ash leached and purified by SLM. The SLM separation process was more selective for heavy REEs over the light REEs. When SLM was combined with ED, preliminary results demonstrated that a final product of >2 wt.% REEs was possible.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Novel Membrane and Electrodeposition-Based Separation and Recovery of Rare Earth Elements from Coal Combustion Residues (Final Report)

This project developed a hydrometallurgical-based technology to extract and concentrate rare earth elements (REEs) from a representative group of coal combustion residuals (CCRs) from major coal sources in the United States. The approach for REE recovery comprises two general components: (1) Leaching of REEs from CCRs and (2) Separation of REEs from other major ions in the CCR leachate. The leaching step entails acid leaching with nitric or hydrochloric acid, and in some cases, pretreatment of CCRs with alkaline roasting prior to acid leaching. The follow-up REE recovery steps involve a series of membrane-based methods to separate and concentrate rare earth ions from other major ions in acid leachates of CCRs. These methods include liquid emulsion membranes, supported liquid membranes and electrodeposition with carbon nanotube electrochemical filters. The advantage of these separation approaches (relative to conventional approaches such as solvent extraction) is a reduction in the usage of solvents and other costly chemicals and a reduction of hazardous waste products that are challenges in conventional REE separation methods. In the testing of our process, we selected a representative set of CCR samples from our collection and performed a suite of characterization measurements (total REE content and major mineralogy). The major results of this work demonstrated that heated acid leaching could efficiently extract REEs from PRB-based coal fly ashes while the Appalachian and Illinois Basin CCRs required alkaline roasting with NaOH prior to acid leaching at room temperature. The supported liquid membrane (SLM) configuration and electrochemical deposition (ED) system yielded the most promising methods of REE recovery from the acid leachates of fly ash. Our most concentrated product to date comprised 1 wt.% (dry basis) REEs produced from an Appalachian-based fly ash leached and purified by SLM. The SLM separation process was more selective for heavy REEs over the light REEs. When SLM was combined with ED, preliminary results demonstrated that a final product of >2 wt.% REEs was possible.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Separation, recovery and upgrading of biomass derived 2,3-butanediol

The invention relates to a two-way approach to isolate, recover and upgrade 2,3-Butanediol (2,3-BDO) from fermentation broth. A complete separation and recovery process for 2,3-BDO using acetalization and trans-acetalization sequence. Acetalization with butyraldehyde using heterogeneous catalysts, either Amberlyst-15® or Nafion NR50®, efficiently isolates 2,3-BDO as phase-separated protected dioxolane. The approach provides significant process advantages with easy product recovery and high recyclability of the catalyst. Trans-acetalization of dioxolane with methanol (methanolysis) followed by distillation of acetal, yielded very high purity 2,3-BDO with about 90% isolated yield. Alternatively, dioxolane is used in a process direct to methyl ethyl ketone (MEK) as a BDO synthon allowing for recovery of the aldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Applying Improved Optical Recognition with Machine Learning on Sorting Cu Impurities in Steel Scrap

Annually, 20–55 million tons of electronic waste (e-waste) is produced worldwide (5% of all municipal solid waste). Although e-waste embodies only 2% of America’s municipal waste, it accounts for a significantly larger proportion of the heavy metals and flame retardants present in the waste stream. Currently, less than 20% of all e-waste is recycled in the United States because the heterogeneity of the feedstock limits the opportunity for reuse in high value products and processing of the waste itself is often too costly to justify handling. To address this concern, the aims of this study are: 1) to identify the major plastic and metal compositions within electronic shredder residue (ESR), 2) to formulate solvents and processing conditions to separate 90% of the plastics targeted from consumer shred ESR, and 3) to develop a process design model to estimate the cost and energy efficiency of the proposed solvent-based processing. In this study, a pre-sorted heterogeneous ESR feedstock (one where aluminum, magnetic components, and hazardous battery materials removed by an e-waste recycling facility) was used, with the major compositions of the ESR characterized. It was found that 25 wt.% of the feedstock was composed of plastics, 6 wt.% rubber, 27 wt.% printed circuit boards, 23% wire, and the remainder metals and capacitors. Within the plastic portion, polystyrene (PS, 40 wt.%), acrylonitrile butadiene styrene (ABS, 25 wt.%), and styrene-acrylonitrile (SAN, 9wt.%) were identified to compose the majority of the screened plastics using Fourier transform infrared spectroscopy (FTIR). Next, selective solvents were screened using Hansen Solubility Parameter Theory (HSP) for dissolving PS and ABS. The pre-screening results show that methylene chloride (dichloromethane, DCM) and tetrahydrofuran (THF) are capable of dissolving the most PS and ABS, while methanol (MeOH) and ethylene glycol (EG) are capable of precipitating the most PS and ABS. These solvents were subsequently used to recover polymers and remove. flame retardants within the ESR feedstock. By optimizing the dissolution time and the solvents used, the highest polymer dissolution yield (99 wt.%%) was achieved using DCM for 48 hr. Both pre-screened anti-solvents (MeOH and EG) showed the highest polymer precipitation yield (71 wt.%). In terms of flame retardant removal rate, EG was found to have a high phosphorus-containing flame retardant removal rate (up to 98%). Characterization shows that the proposed solvent-based processing can preserve a high molecular weight fraction of the polymers and effectively remove flame retardants. Cost analysis indicates that the amount of the solvent/anti-solvent recovered after the reaction would play a critical role in reducing the operating costs. The energy analysis shows that the proposed solvent-based processes can save up to 60% of the embodied energy used to manufacture plastics used in electronics (PS and ABS were used for calculations). The results from this project prove the potential of solvent-based processing to produce secondary materials (plastics and metals) from e-waste for cross-industry reuse.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Discriminating cascading processes in nonlinear optics: A QED analysis based on their molecular and geometric origin

The nonlinear optical response of a system of molecules often contains contributions whereby the products of lower-order processes in two separate molecules give signals that appear on top of a genuine direct higher-order process with a single molecule. These many-body contributions are known as cascading and complicate the interpretation of multidimensional stimulated Raman and other nonlinear signals. In a quantum electrodynamic treatment, these cascading processes arise from second-order expansion in the molecular coupling to vacuum modes of the radiation field, i.e., single-photon exchange between molecules, which also gives rise to other collective effects. Furthermore, we predict the relative phase of the direct and cascading nonlinear signals and its dependence on the microscopic dynamics as well as the sample geometry. This phase may be used to identify experimental conditions for distinguishing the direct and cascading signals by their phase. Higher-order cascading processes involving the exchange of several photons between more than two molecules are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Chemical Recycling of Mixed Plastics and Valuable Metals in the Electronic Waste Using Solvent-Based Processing

Annually, 20-55 million tons of electronic waste (e-waste) is produced worldwide (5% of all municipal solid waste). Although e-waste embodies only 2% of America’s municipal waste, it accounts for a significantly larger proportion of the heavy metals and flame retardants present in the waste stream. Currently, less than 20% of all e-waste is recycled in the United States because the heterogeneity of the feedstock limits the opportunity for reuse in high value products and processing of the waste itself is often too costly to justify handling. To address this concern, the aims of this study are: 1) to identify the major plastic and metal compositions within electronic shredder residue (ESR), 2) to formulate solvents and processing conditions to separate 90% of the plastics targeted from consumer shred ESR, and 3) to develop a process design model to estimate the cost and energy efficiency of the proposed solvent-based processing. In this study, a pre-sorted heterogeneous ESR feedstock (one where aluminum, magnetic components, and hazardous battery materials removed by an e-waste recycling facility) was used, with the major compositions of the ESR characterized. It was found that 25 wt.% of the feedstock was composed of plastics, 6 wt.% rubber, 27 wt.% printed circuit boards, 23% wire, and the remainder metals and capacitors. Within the plastic portion, polystyrene (PS, 40 wt.%), acrylonitrile butadiene styrene (ABS, 25 wt.%), and styrene-acrylonitrile (SAN, 9wt.%) were identified to compose the majority of the screened plastics using Fourier transform infrared spectroscopy (FTIR). Next, selective solvents were screened using Hansen Solubility Parameter Theory (HSP) for dissolving PS and ABS. The pre-screening results show that methylene chloride (dichloromethane, DCM) and tetrahydrofuran (THF) are capable of dissolving the most PS and ABS, while methanol (MeOH) and ethylene glycol (EG) are capable of precipitating the most PS and ABS. These solvents were subsequently used to recover polymers and remove. flame retardants within the ESR feedstock. By optimizing the dissolution time and the solvents used, the highest polymer dissolution yield (99 wt.%%) was achieved using DCM for 48 hr. Both pre-screened anti-solvents (MeOH and EG) showed the highest polymer precipitation yield (71 wt.%). In terms of flame retardant removal rate, EG was found to have a high phosphorus-containing flame retardant removal rate (up to 98%). Characterization shows that the proposed solvent-based processing can preserve a high molecular weight fraction of the polymers and effectively remove flame retardants. Cost analysis indicates that the amount of the solvent/anti-solvent recovered after the reaction would play a critical role in reducing the operating costs. The energy analysis shows that the proposed solvent-based processes can save up to 60% of the embodied energy used to manufacture plastics used in electronics (PS and ABS were used for calculations). The results from this project prove the potential of solvent-based processing to produce secondary materials (plastics and metals) from e-waste for cross-industry reuse.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

Supercritical Water Oxidation: Testing of Ersatz Wastewater

Supercritical Water Oxidation (SCWO) technology is under consideration by NASA for treatment of wastewater and other wet waste streams. The dramatic changes in water's thermophysical properties near its critical point (374◦C and 22 MPa) result in nearly complete solubility of organics and gases. The absence of inter–phase transport processes and phase separation results in dramatically reduced reaction timescales and the elimination of complications of two–phase transport and processing in reduced gravity. Other advantages are that the product streams are microbially inert,benign, amenable to resource recovery and organic waste. This paper first described the design and construction of tubular SCWO reactor built at NASA Glenn. It consists of separate wastewater and oxidizer inlets, which are independently heated and pressurized to conditions approaching the critical point of water. These flows enter a reactor chamber having a volume of 62 ml. The reactor section is heated to the desired temperature in the range of 450 ◦C – 650 ◦C. A pressure regulator maintains the operating pressure nominally between 27.6 MPa and 28.3 MPa. The reacted fluid is captured downstream of the pressure regulator during an experiment run. A separate vent line may also be used for collection of the effluent. Next, the results of SCWO experiments using both a representative organic (ethanol) as well as a wastewater simulant provided by NASA Ames are presented. Raman analysis of the pre–reacted and post–reacted solutions are presented. Finally, initial efforts on supplementary chemical kinetics modeling of ethanol oxidation with and without inclusion of a nitrogenous compounds (ammonia) are presented.

Michael C Hicks↗
DOE OSTI2023

Multi-Sourced Collaboration for the Production and Refining of Rare Elements and Critical Metals (Final Technical Report)

The project objective was to develop a feasible and cost-effective method for recovering rare earth elements (REEs) and critical materials (CMs) from coal and coal byproducts, resulting in high-purity individually separated REEs and CMs. The targeted REEs included Y, Pr, Nd, Gd, Dy, and Sm, with a purity of over 99.5%, while the CMs included Co, Mn, Ga, Sr, Li, Ni, Zn, and Ge, with a purity of over 90%. The project aimed to design a prototype facility capable of producing 1-3 tonnes/day of high-purity REO mixes. The work was divided into four designated circuits: 1) REE extraction and concentration, 2) REE separation and purification, 3) RE metal production, and 4) CM production. To achieve these goals, the project involved 11 tasks, including technology reviews, research, process flow diagram development, mass balance estimation, and preliminary technical-economic analysis. The project team included researchers from the University of Kentucky, University of Alabama and Virginia Tech as well as process specialists from Argonne National Laboratory. MP Materials provided technical support regarding rare earth markets and processing while Alliance Coal performed resource assessment. The project included a market analysis for Nd/Pr, Tb, Dy, Gd, Y, Co, Mn, Li, Sr, Ga, Ni, Zn, and Ge. These analyses provided insights into the supply and demand trends as well as historic and future projections of market price relative to purity requirements for these elements. Two coal resources were selected for the project: the West Kentucky No. 13 (Baker) Seam and an undisclosed lignite resource in the Illinois coal basin. The estimated quantities of REEs in these resources were calculated based on production samples and drilling data. It was estimated that there is adequate supply for an operation producing one metric ton daily of higher purity mixed rare earth oxides (MREO) for approximately 20 years at a site located in western Kentucky. In Circuit 1, project data was obtained from a pilot heap leach and REE concentration facility. It was concluded that the existing circuit, which generated a MREO concentrate, two types of CM mixed products, and Li- and Sr-containing waters, would be suitable feed for circuits 2-4. Data from the first-of-its-kind coal coarse refuse heap leach pilot pad played a crucial role in estimating reliable elemental concentrations of the pregnant leaching solution (PLS). The average total REE concentration in the PLS was found to be 28.6 ppm. In Circuit 2, several concepts were explored including a novel process referred to as solvent-assisted chromatography (SAC). This concept involved a novel columnar reactor that incorporated multiple mixer/settlers, thereby enabling the operation of counter-flowing aqueous and organic phases. Unfortunately, due to project time constraints, a complete fundamental modeling analysis could not be completed to fully evaluate the technology. Molten salt electrowinning was considered as an alternative for circuit 3 following circuit 2 purification circuit utilizing the novel SAC process. A mass and energy balance of Nd reduction to metal in a fluoride containing molten salt electrolyte was conducted. Comparisons were made with the current state of Asian molten salt electrorefining, and potential improvements in siphoning rare earth metals (REM) from the reactor were presented. A cost estimate was performed for the production of 1 tonne per day, which yielded a total of $2.29 million for the nine electrowinning (EW) cells required. The selected option for circuits 2 and 3 was a plasma distillation process, which initially separates rare earth elements (REEs) from other elements. This is followed by selective electrowinning in various ionic liquids. The selection was made on the basis of thermodynamic modeling and experimental data previously published by a project partner. The combination offers an innovative approach to integrated refining and RE metal production. For Circuit 4, an extensive literature review was conducted for the processing of the CMs. The ultimate decision was to utilize a combined plasma and ionic liquid process as well to produce individual high-purity concentrates of Zn, Ni, Co, Mn, and Mg. A separate flowsheet for Li and Sr was recommended, which would yield carbonates of these elements. Due to the lack of suitable experimental data at this time, a process recommendation could not be provided but several methods have been proposed for consideration. Lastly, a techno-economic analysis (TEA) was conducted to assess the effectiveness of the proposed process for further investigation. The TEA results revealed a capital expense (CapEx) of $737 million and an annual operational expense (OpEx) of $220 million. Due to the selected elements, the hypothetical heap leach pad can produce 1 metric tonne per day of REO equivalent, but a conscious decision was made to only treat targeted REEs, resulting in the production of 0.4 metric tonne of REM. An estimated annual revenue of $90.87 million was projected based on standard market pricing information provided by the funding agency. During the TEA, ten different modules were evaluated for costing purposes. The precipitation circuit was identified as the largest single operational expense, followed by the Mg/Mn process due to the amount of treated metal. In terms of capital expenditures, the heap leach process incurred the highest cost, followed by the Mg/Mn process. The scalability of the plasma process is a crucial consideration since the reactors cannot be scaled beyond the largest demonstrated size due to their reliance on surface area of the slag and vapor phase. The purity estimate for the REEs are generally 98%±2% to produce a metal. The purity level being lower than the project objective was due to the lack of specific experimental data needed to tighten the tolerance of the estimates. Based on literature and previous experience, the CMs are estimated as follows; Ga (95%+, metal), Sr (95%+, carbonate), Li (95%+, carbonate), Ni (98%±2%, metal), Zn (95%+, metal sponge), Ge (95%+, metal), Co (98%±2%, metal), and Mn (98%±2%, metal).

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2018

Measurement of {sup 99}Mo Yield in {sup 100}Mo(p, x) with 30 MeV Proton Irradiation of Multicomponent Submicron Particles

The radionuclide {sup 99}Mo was produced and separated in the process of irradiating powdered mixtures of molybdenum compounds and buffer particles by 30 MeV protons. The separation is based on the Szilard–Chalmers effect wherein {sup 99}Mo recoil particles are fixed in inert buffer particles. Two types of targets were investigated by using mixtures: soluble molybdenum compound–insoluble buffer and insoluble molybdenum compound–soluble buffer. {sup 99}Mo yield equal to 20% with enrichment coefficient 18.3 was obtained by using a target consisting of a mixture of submicron {sup 100}MoO{sub 3} and Al{sub 2}O{sub 3} particles; the {sup 99}Mo yield was equal to 20% and the enrichment coefficient 18.3. For a target with the composition {sup 100}MoS{sub 2} + KCl, making it possible to separate {sup 99}Mo recoil atoms directly into solution, the {sup 99}Mo yield was equal to 8.7% and the enrichment coefficient 30.7.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2018

Data from Ethanol Production from Corn Fiber Separated after Liquefaction in the Dry Grind Process

Conversion of corn fiber to ethanol in the dry grind process can increase ethanol yields, improve coproduct quality and contribute to process sustainability. This work investigates the use of two physio-chemical pretreatments on corn fiber and effect of cellulase enzyme dosage to improve ethanol yields. Fiber separated after liquefaction of corn was pretreated using (1) hot water pretreatment (160°C for 5, 10 or 20 min); and (2) wet disk milling and converted to ethanol. The conversion efficiencies of hot water pretreated fiber were higher than untreated fiber, with highest increase in conversion (10.4%) achieved for 5-minute residence time at 160 °C. Disk milling was not effective in increasing conversion compared to other treatments. Hydrolysis and fermentation of untreated fiber with excess cellulase enzymes resulted in 33.3% higher conversion compared to untreated fiber. Note: in “Table1_Treatments.csv”, NA = Not applicable.

Conversion↗