Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Water–gas shift reaction over gold nanoparticles dispersed on nanostructured CeO x –TiO 2 (110) surfaces: Effects of high ceria coverage

We used scanning tunnelling microscopy to study the morphology of an overlayer of ceria in contact with a TiO 2 (110) substrate. Two types of domains were observed after ceria deposition. An ordered ceria film covered half of the surface and high-resolution imaging suggested a near-c(6 × 2) relationship to the underlying TiO 2 (110)-(1 × 1). For the other half of the surface, it comprised CeO x nanoparticles and reconstructed TiOx supported on TiO 2 (110)-(1 × 1). Exposure to a small amount of gold resulted in the formation of isolated gold atoms and small clusters on the ordered ceria film and TiO 2 (110)-(1 × 1) areas, which exhibited significant sintering at 500 K and showed strong interaction between the sintered gold clusters and the domain boundaries of the ceria film. The Au/CeO x /TiO 2 (110) model system proved to be a good catalyst for the water–gas shift (WGS) exhibiting much higher turnover frequencies (TOFs) than Cu(111) and Pt(111) benchmarks, or the individual Au/TiO 2 (110) and Au/CeO 2 (111) systems. Finally, for Au/CeO x /TiO 2 (110) catalysts, there was a decrease in catalytic activity with increasing ceria coverage that correlates with a reduction in the concentration of Ce 3 + formed during WGS reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis of a planar, multicomponent catalytic surface of Na 2 CO 3 /MnO

Here, O 2 adsorption on MnO(100) precovered with sodium (Na) multilayers was investigated by X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD). Deposition of Na multilayers leads to a first monolayer of oxidic Na followed by metallic Na island growth. XPS results for the oxidation of the metallic Na islands indicate an incomplete oxidation of Na at 125 K. Oxidation at 350 K completely oxidizes the metallic islands producing a mixture of Na 2 O and Na 2 O 2 . Thermal evolution of the oxidation products was examined. After oxidation at 350 K and flashing to 750 K, Na 2 O and Na 2 O 2 are the primary oxides on MnO(100). After flashing to 850 K, a solid state reaction of Na 2 O 2 /Na 2 O and the MnO(100) substrate forms a NaMnO 2 -like surface compound which decomposes above 850 K. Oxygen exchange between CO 2 and Na oxides is observed. The strong interaction between CO 2 and Na oxide islands forms Na 2 CO 3 on MnO(100). Heating the Na 2 CO 3 covered MnO(100) surface to 600 K for 10 min drives oxidic Na in the first monolayer into the MnO subsurface, and produces a surface exposing islands of Na 2 CO 3 on MnO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Modeling nuclear waste disposal in crystalline rocks at the Forsmark and Olkiluoto repository sites – Evaluation of potential thermal–mechanical damage to repository excavations

We conduct coupled thermo-hydro-mechanical modeling of a KBS-3V repository design in crystalline rocks, using data and conditions from the Forsmark in Olkiluoto repository sites in Sweden and Finland. The study focuses on repository performance related to the impact of thermal and hydraulic evolution on the potential for thermal–mechanical damage to underground repository excavations. For the designs and conditions considered at the Forsmark and Olkiluoto repository sites, the simulations show a peak temperature well under the adopted performance target of a 100°C maximum temperature, whereas there is still a high potential for thermal–mechanical damage to the KBS-3V waste deposition holes. The thermal–mechanical damage is much more likely if rock permeability is so low that it delays saturation and swelling of bentonite-clay-based backfill beyond the time for the thermal–mechanical peak, which occurs 50 to 100 years after nuclear waste deposition. We also found that sidewalls of the KBS-3V emplacement tunnels are vulnerable to tensile fracturing due to the combined effect of thermal stressing and backfill swelling. The study highlights a strong interaction between bentonite-based backfill and host rock through capillary suction along with induced rock desaturation. A careful design and selection of the bentonite-clay-based backfill materials for KBS-3V tunnels and deposition holes can facilitate a timely saturation and backfill swelling that in turn can minimize thermal–mechanical damage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Design of compact ultrafast microscopes for single- and multi-shot imaging with MeV electrons

Ultrafast high-energy electron microscopy, taking advantage of strong interaction of electrons with matter while minimizing space charge problems, can be used to address a wide range of grand challenges in basics energy sciences. However, MeV-electron lenses are inherently bulky and expensive, preventing them from acceptance in a broad scientific community. In this article, we report our novel design of a compact, low-cost imaging-lens system for MeV-electrons based on quadrupole multiplets, including triplet, quadruplet and quintuplet, both symmetric and asymmetric. We compare optical performance of quadrupole-based condenser, objective and projector lenses with that of the traditional round-lenses and discuss the strategy for their practical use in constructing MeV-electron microscopes for high spatial and temporal resolution single- and multi-shot imaging. Combining the compound electron-optical system with a photocathode radiofrequency (RF) gun, such a MeV electron microscope can be fit into a smallsized laboratory for ultrafast observations and measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Origin of rate limitations in solid-state polymer batteries from constrained segmental dynamics within the cathode

Currently, one of the key challenges preventing the wide commercialization of polymer-based solid-state batteries is achieving high-rate capabilities. This work unravels chain structure and segmental dynamics in a polymer-based composite cathode consisting of LiFePO 4 (LFP), carbon, and poly(ethylene oxide) (PEO) with lithium bis(trifluoromethanesulfonyl)imide. Small-angle neutron scattering (SANS) data reveal that PEO chains are adsorbed on the surface of LFP particles during slurry processing to make the composite electrode. The strong interaction between LFP and PEO chains leads to greatly reduced segmental dynamics of PEO, as discovered by quasi-elastic neutron scattering (QENS). The reduced segmental dynamics results in 70% decreased Li + mobility of the polymer electrolyte in the composite cathode. The combined SANS and QENS study indicates that one of the key bottlenecks that limits the rate performance of PEO-based polymer batteries originates from molecular interactions within the cathode.

25 ENERGY STORAGE↗
DOE OSTI2017

Morphology-Driven Control of Metabolite Selectivity Using Nanostructure-Initiator Mass Spectrometry

Nanostructure-initiator mass spectrometry (NIMS) is a laser desorption/ionization analysis technique based on the vaporization of a nanostructure-trapped liquid "initiator" phase. Here in this work, we report an intriguing relationship between NIMS surface morphology and analyte selectivity. Scanning electron microscopy and spectroscopic ellipsometry were used to characterize the surface morphologies of a series of NIMS substrates generated by anodic electrochemical etching. Mass spectrometry imaging was applied to compare NIMS sensitivity of these various surfaces toward the analysis of diverse analytes. The porosity of NIMS surfaces was found to increase linearly with etching time where the pore size ranged from 4 to 12 nm with corresponding porosities estimated to be 7-70%. Surface morphology was found to significantly and selectively alter NIMS sensitivity. The small molecule (<2k Da) sensitivity was found to increase with increased porosity, whereas low porosity had the highest sensitivity for the largest molecules examined. Estimation of molecular sizes showed that this transition occurs when the pore size is <3× the maximum of molecular dimensions. While the origins of selectivity are unclear, increased signal from small molecules with increased surface area is consistent with a surface area restructuring-driven desorption/ionization process where signal intensity increases with porosity. In contrast, large molecules show highest signal for the low-porosity and small-pore-size surfaces. We attribute this to strong interactions between the initiator-coated pore structures and large molecules that hinder desorption/ionization by trapping large molecules. Lastly, this finding may enable us to design NIMS surfaces with increased specificity to molecules of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Structural Basis for the Species-Selective Binding of N,C-Capped Dipeptides to the Mycobacterium tuberculosis Proteasome

The Mycobacterium tuberculosis (Mtb) 20S proteasome is vital for the pathogen to survive under nitrosative stress in vitro and to persist in mice. To qualify for drug development, inhibitors targeting Mtb 20S must spare both the human constitutive proteasome (c-20S) and immunoproteasome (i-20S). We recently reported members of a family of noncovalently binding dipeptide proteasome inhibitors that are highly potent and selective for Mtb 20S over human c-20S and i-20S. To understand the structural basis of their potency and selectivity, we have studied the structure–activity relationship of six derivatives and solved their cocrystal structures with Mtb 20S. The dipeptide inhibitors form an antiparallel β-strand with the active site β-strands. Selectivity is conferred by several features of Mtb 20S relative to its mouse counterparts, including a larger S1 pocket, additional hydrogen bonds in the S3 pocket, and hydrophobic interactions in the S4 pocket. Serine-20 and glutamine-22 of Mtb 20S interact with the dipeptides and confer Mtb-specific inhibition over c-20S and i-20S. The Mtb 20S and mammalian i-20S have a serine-27 that interacts strongly with the dipeptides, potentially explaining the higher inhibitory activity of the dipeptides toward i-20S over c-20S. This detailed structural knowledge will aid in optimizing the dipeptides as anti-tuberculosis drugs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Side Chain Regioisomers that Dictate Optical Properties and Mechanofluorochromism through Crystal Packing

Designing strong interactions into $π$-conjugated materials can direct their typically uncontrolled molecular packing and is an important strategy toward tuning their technologically relevant properties in the solid state. In this paper we demonstrate unconventional control over solid-state fluorescence and mechanofluorochromism (MFC) through regiochemical substitutions in side chains of 12 three-ring phenylene ethynylenes (PEs) that employ fluoroarene–arene (ArF–ArH) interactions between tetrafluoro ArF pendants and PE main chains to direct crystal packing, with single-atom variations of the lone proton in ArF pendants between 4-hydro, 5-hydro, and 6-hydro substitution yielding in two cases dramatically different fluorescence and MFC behavior. X-ray crystal structures reveal key intermolecular interactions of ArF rings, including their lone protons, which vary as a function of substitution pattern and contribute to optical properties in solids. Rarely reported, particularly with such dramatic results, this systematic study on regiochemical effects over solid-state properties demonstrates the versatility of using discrete, directional interactions of side chains for noncovalent control in conjugated materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Observation of Stepwise Ultrafast Crystallization Kinetics of Donor–Acceptor Conjugated Polymers and Correlation with Field Effect Mobility

The semicrystalline microstructures of donor-acceptor conjugated polymers strongly impact their optoelectronic properties. The control of the microstructure relies on the understandings of the crystallization processes in these polymers, from packing structures to crystallization kinetics. How fast these conjugated polymer chains crystallize and how their chemical structures and pre-existing microstructure history influence their crystallization have so far remained unclear, due to the fast crystallization rate caused by chain rigid structures and strong interactions. Here, ultrafast scanning calorimetry (FSC) is employed to reveal the crystallization behaviors of high perform- ance diketopyrrolopyrrole (DPP)-based conjugated polymers with scanning rates up to 500 000 K/s. Through elaborately designed nonisothermal and isothermal crystallization studies, we probed the fast crystallization kinetics and extracted the two-step crystallization process of these polymers quantitatively. We found that both the rigidity of the chain backbones and the preinduced crystalline microstructures can influence the crystallization rate over an order of magnitude at the same degree of undercooling. We further demonstrated the manipulated crystallization kinetics in the DPP-based polymer films with different amounts of preinduced crystallites and correlate it to the polymers’ charge transport mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sequential Infiltration Synthesis of Multinary Metal Oxides: The Role of Precursor Diffusion and Reactivity

Understanding volatile metal–organic precursor transport in polymer matrices during sequential infiltration synthesis (SIS) is critical to the design of hybrid materials of tailored composition and uniform structure. Here, we investigate the diffusion and reaction behavior of diethylzinc (DEZ) in poly(methyl methacrylate) (PMMA) matrices with variable indium and zinc incorporation. Unlike conventional SIS where precursors adduct or react directly with the polymer backbone, DEZ shows minimal interaction with PMMA. However, DEZ may interact strongly with In–OH or Zn–OH moieties that are previously incorporated into a PMMA thick film. Using spectroscopic ellipsometry, X-ray photoelectron spectroscopy depth profiling, and EDX line scans, we quantify Zn incorporation as a function of exposure time, polymer thickness, and previous infiltration steps. The Zn distribution evolves from surface-localized to deep within the ∼1 μm thick film with increasing DEZ exposures up to 30 min. A reaction-diffusion model incorporating a hindering factor to capture diffusivity decay due to product accumulation reproduces the Zn depth profile and yields physically meaningful parameters to guide future growth. Furthermore, this study provides a framework for interpreting metal–organic precursor infiltration behavior and highlights the utility of model-guided SIS process design.

diethylzinc↗
DOE OSTI2016

Influence of Rotational Distortions on Li + - and Na + -Intercalation in Anti-NASICON Fe 2 (MoO 4 ) 3

Anti-NASICON Fe 2 (MoO 4 ) 3 (P2 1 /c) shows significant structural and electrochemical differences in the intercalation of Li + and Na + ions. To understand the origin of this behavior, we have used a combination of in situ X-ray and high-resolution neutron diffraction, total scattering, electrochemical measurements, density functional theory calculations, and symmetry-mode analysis. We find that for Li + -intercalation, which proceeds via a two-phase monoclinic-to-orthorhombic (Pbcn) phase transition, the host lattice undergoes a concerted rotation of rigid polyhedral subunits driven by strong interactions with the Li + ions, leading to an ordered lithium arrangement. Na + -intercalation, which proceeds via a two-stage solid solution insertion into the monoclinic structure, similarly produces rotations of the lattice polyhedral subunits. Furthermore, using a combination of total neutron scattering data and density functional theory calculations, we find that while these rotational distortions upon Na + -intercalation are fundamentally the same as for Li + -intercalation, they result in a far less coherent final structure, with this difference attributed to the substantial difference between the ionic radii of the two alkali metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Tuning Anionic Chemistry To Improve Kinetics of Mg Intercalation

Rechargeable Mg batteries (RMBs) hold great promise for high energy density in consumer electronics because of the high theoretical volumetric capacity and dendrite-free stripping/plating of Mg. Their development, however, is severely limited by the sluggish diffusion of Mg 2+ in inorganic cathodes, mainly induced by strong interaction between Mg 2+ and host anions. In this paper, for the first time, we systematically investigate how anionic chemistry (O, S, and Se) affects Mg 2+ migration in layered MX 2 (M = Ti and V; X = O, S, and Se), by combining theoretical density functional theory (DFT) calculations with electrochemical characterizations. At room temperature, TiSe 2 and VSe 2 achieve much better electrochemical performance than TiS 2 and VS 2 , due to the faster migration of Mg 2+ in selenide than in sulfide and oxide, as demonstrated by electrochemical kinetic characterizations and DFT calculations. The improved kinetics of selenide can be attributed to three criteria: (i) larger diffusion channel, (ii) weaker interaction between Mg 2+ and anion lattice, and (iii) higher electronic conductivity. Finally, the three criteria might not only be applicable to layered materials but also be generalizable to materials with other structures, like Chevrel phase, spinel, olivine, etc., which paves the way for the future design and modification of intercalation materials for RMBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alizarin Multilayers Adsorbed onto Glassy Carbon Electrodes for Electrochemical Sequestration of Manganese, Sodium, and Lithium Cations

The development of efficient methods for metal ion recovery and water remediation is critical for addressing the nation’s urgent need for secure domestic supply chains, overcoming critical materials challenges, and ensuring resilient manufacturing. Here, we present a novel approach for synthesizing stable Alizarin (Alz, 1,2-dihydroxy anthraquinone) multilayers on glassy carbon electrodes (GCEs) for electrochemical sequestration of manganese, sodium, and lithium cations. Alz-GCEs exhibit negatively shifted reduction potentials, indicating strong interactions between Alz and metal cations through metal-coupled electron transfer (MCET) mechanisms. The cation binding interactions and redox behavior of these electrodes were investigated using cyclic voltammetry (CV) and density functional theory (DFT) calculations. Our results demonstrate that Alz forms multilayer structures on GCEs with redox properties that are modulated by the presence of metal cations in the electrolyte. DFT calculations provide insights into the electrochemical mechanism, indicating both stepwise and concerted pathways for metal binding. The findings highlight the potential of Alz-GCEs for efficient and selective metal ion capture, which could be useful for developing sustainable materials for critical metal recovery and water remediation. This work suggests that redox-mediated organic adlayers are promising candidates for advancing electrochemical separation technologies of metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Tunable Thermal Expansion from Negative, Zero, to Positive in Cubic Prussian Blue Analogues of GaFe(CN) 6

The control of thermal expansion of open framework Prussian blue analogues is vital but remains challenging. The present work proposes an effective method to control the thermal expansion, in which guest ions (Na + ) and molecules (H 2 O) can adjust the coeffecient of thermal expansion from strong negative, to near zero, to positive in GaFe(CN) 6 Prussian blue analogues. Direct experimental evidence by high resolution synchrotron X-ray diffraction and X-ray absorption fine structure shows that the guest ions or molecules have intense dampening effect on the transverse vibrations of -Ga–N≡C–Fe– linkage responsible for NTE, especially for N atoms. The role of guests in controlling thermal expansion is attributed to the strong interaction of local environment – steric dampening. Furthermore, the present study demonstrates that electrochemical or redox intercalation of guest ions can be a general and effective method for controlling thermal expansion for those open framework materials with negative thermal expansion driven by low Frequency phonons.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Probing the Sorption of Perfluorooctanesulfonate Using Mesoporous Metal–Organic Frameworks from Aqueous Solutions

To reduce increasing concentrations of toxic per- and polyfluoroalkyl substances (PFAS), one approach involves the capture of PFAS from aqueous media using porous materials. The use of highly porous, tunable metal organic framework (MOF) materials is appealing for targeted liquid phase adsorption. In this work, for the first time, we demonstrate the excellent capture potential of perfluorooctane sulfonate (PFOS) using both the chromium and iron analogs of the MIL-101 structure. Experimental characterization of PFOS uptake reveals unique differences in adsorption properties between these two analogs providing key implications for future PFOS sorbent design. Specifically, STEM-EDS and IR spectroscopy show definitive proof of adsorption. Furthermore, XPS analysis shows evidence of a strong interaction between sulfur atoms of the polar head group of PFOS and the metal center of the framework in addition to the fluorinated non-polar tail. Additionally, in-situ 19 F NMR reveals higher PFOS affinity for Cr-MIL-101 versus Fe-MIL-101 based on adsorption kinetics. Surprisingly, at these relatively high PFOS concentrations, activated acetylene black carbon is severely outperformed by both MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photoelectron Spectroscopy and Computational Study on Microsolvated [B 10 H 10 ] 2– Clusters and Comparisons to Their [B 12 H 12 ] 2– Analogues

Microhydrated closo-Boranes have attracted great interests due to their superchaotropic activity related to well-known Hofmeister effect and important applications in biomedical and battery fields. In this work, we report a combined negative ion photoelectron spectroscopy and quantum chemical investigation on hydrated closo-decaborate clusters [B 10 H 10 ] 2- ·nH 2 O (n = 1 – 7) with a direct comparison to their analogues [B 12 H 12 ] 2- ·nH 2 O and free water clusters. A single H 2 O molecule is found sufficient to stabilize the intrinsically unstable [B 10 H 10 ] 2- dianion. The first two water molecules strongly interact with the solute forming B-H···H-O dihydrogen bonds while additional water molecules show substantially reduced binding energies. Unlike [B 12 H 12 ] 2- ·nH 2 O possessing highly structured water network with the attached H 2 O molecules arranged in a unified pattern by maximizing B-H···H-O dihydrogen bonding, distinct structural arrangements of the water clusters within [B 10 H 10 ] 2– ·nH 2 O are achieved with the water cluster networks from trimer to heptamer resembling free water clusters. Such a distinct difference arises from the variations in size, symmetry, and charge distributions between these two dianions. Finally, the present finding again confirms the structural diversity of hydrogen-bonding networks in microhydrated closo-boranes and enrich our understanding of aqueous borate chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗